Planned and Actual production

Hi Guyz,
       Is there any transaction code which shows the result of Planned Production and Actual production of material?
       Which table holds the planned production of material?
Thanks in advance.

Check AFKO & AFRU tables

Similar Messages

  • Tcode for planned production  and actual production

    Hello,
    I am working with a report I want to check the values with R/3 for Planned Production and Actual production. Does anybody have any idea how to check?
    Thanks in advance

    Hey Suman,
    i have the same problem, did you find a solution?
    thanks

  • Function module for calculating planned and actual cost of production order

    Hi ,
    Do we have any standard function module for calculating planned and actual cost for production order?
    i need to implement this in a Z-report.
    Thanks
    Srini

    Hi,
    try below function module
    CRMCO_GET_PLAN_ACTUAL_COSTS
    CO_IH_GET_PLANNED_COSTS_TOTAL
    Regards,
    Sankaran

  • Table for Production order planned and Actual cost

    Hi Experts,
    Can anybody please tell me the name of table where Production order planned and Actual cost gets saved ?
    Thanks in advance.
    Regards,
    Bijay

    Table COEP
    don't forget the points

  • Bar chart(Ghantt chart) for Plan and actual of production order

    I want to know that any standard Ghantt chart (Bar chart) is available to view the plan and actual qty, execution start and finish time of production order.
    In CO01/02/03 it shows only the planned execution time in Ghantt chart,but it doesnot show the actuals.

    CM07 gives about the information of capacity allocation. It will not show the actual execution from date and to date.
    I want to see the Planned from period to to-period and actual also in bar chart form.

  • Planned and actual consumption for each confirmation

    Dear All,
    There is a production order. it has two operations. i have made three confirmations of each operation for that order. now i want to see the planned and actual consumption for each confirmation. how is it possible.
    However i know that on order we can see planned and actual consumption but it is for total order but i want to see planned and actual consumption for each confirmation. Actually client wants that on 2nd confirmation what is planned consumption and what they consumed on actual. thanks

    Hi,
            In standard SAP this type of report not be there, but u can make it by using BOM,Confirmation table, & material document table.
    Use AFRU to get posted document no for confirmation & detail by joining it with MSEG by mblnr & MAZHR.
    now u get plan component qty by using mast & stpo if ur bom not changed in Production order , if in order component may be change then use afko & resb table & by comparing base qty or order qty & confirmation qty get plan component qty for confirmation.
    Thanks
    Rakesh

  • Planned and Actual Labour hour

    Hi,
    Pl. let me know the table and field name for the following.
    1) Planned and delivered date for the production order.
    2) Planned and Actual labour hours for the production order.
    3) Work centre for the production order operation reference.
    Madhava

    Hi,
    Find the below related  tables
                         AUFK                    Production order headers
         AFIH                    Maintenance order header
         AUFM                    Goods movement for prod. order
         AFKO                    Order header data PP orders
         AFPO                    Order item
         RESB                    Order componenten     
           AFVC                    Order operations
         AFVV                    Quantities/dates/values in the operation
         AFVU                    User fields of the operation
         AFFL                    Work order sequence
         AFFH                    PRT assignment data for the work order(routing)
         JSTO                    Status profile
                          JEST                    Object status
         AFRU                    Order completion confirmations
    Regards
    SANIL

  • Confirmation planned and actual time

    Hi All,
    I am doing operation confirmatio by CO11N with milestone confirmation. While confirmation system giving planned time base on production quantity and here i have enter the actual time required.
    Is there any report which will give planned and actual time of confirmation?
    Regards
    Rajesh

    hi
    thanks...
    is there any report which suffices the same.
    Regards
    rajesh

  • Is there standard report for planned and actual devlivery date?

    Hi Guru,
    Could you help me to find standard report to compare planned delivery date in PO and actual delivery date (GR Posting date)?
    I wonder, Is there standard report for planned and actual delivery date?
    or I have to create a customizing report.
    Thank you very much.

    hi
    i dont think it is possible to see both in one pan so try to create some Z report
    u try ME80fn here u have to change the views ,in del shedule view u can see the delivery dtae and in PO histry view u can see the posting date
    regards
    kunal

  • How to differentiate b/w Plan and actual data

    Hi,
    How to differentiate b/w plan nad actual data.
    Is that value type or Version InfoObject??
    What should be the value for that and how it gets populated ??
    Regards,

    Hello Tapan,
    The plan and actual data is differentiated on the basis of value of infoobject 0VTYPE. Value 10 is for actual. Different plan versions can be differentiated by different values of infoobject 0VERSION.
    These values are populated when actual data is loaded or plan data is entered.
    Hope it helps.
    Regards,
    Praveen

  • Best practice for Plan and actual data

    Hello, what is the best practice for Plan and actual data?  should they both be in the same app or different?
    Thanks.

    Hi Zack,
    It will be easier for you to maintain the data in a single application. Every application needs to have the category dimension, mandatorily. So, you can use this dimension to maintain the actual and plan data.
    Hope this helps.

  • Plan and Actual at WBS Elements without activities

    Hi Experts,
      I am in need of a small help from you. My scenario is like this:
    I have equipments/material as WBS Elements( Level1,2...). I have no activities/materials.
    I planned the costs using CJ40 and Budgeted using CJ30 and confirmed all the WBS Elements by entering actual dates for the same.
    Now i want to see planned/actuals costs in report. When i checked in one standard report it is showing 0 for both planned and actuals.
    I also want to have a brief step-by step procedure for Project with only WBS Elements, i.e., from Initiation to Settlement.
    Can anyone please help me in this regard.
    Thanks in advance.
    Regards,
    Suresh.D.

    The following is in answer to
    "I also want to have a brief step-by step procedure for Project with only WBS Elements, i.e., from Initiation to Settlement."
    Most probable scenario would consist of following steps
    Create PDef - Create WBS (either copying from template or manually) - Plan costs - Roll up planned costs - Budget (at top level) - Budget distribute - budget Release - WBS release - Post actual costs - run cost / revenue variance report - settle costs against the WBS - TECO project - Close Project.
    I believe I haven't missed on any important aspect.
    Would appreciate inputs from others in this effort.
    Hope this information was useful.
    Regards,
    Pradyumna

  • How can i get difference in base plan and actual/current plan for a project

    Hi PS Experts,
    How can i get difference in base plan and actual plan .
    For example-
    Project1 is created for 10 days (start and end date difference).
    Now in between -project is extended/changed for 12 days .
    What is the way to get 2 days as a difference in base plan and current plan.
    Thanks
    Suraj prakash

    Hi Suraj,
    You can follow a convention that -
    (1) Forecast Start/Finish dates: Used only for Primary planning, once initial planning is done you should not change these dates.
    Now, you will copy the same dates in Basic Start/Finish dates also.
    (2) Basic Start/Finish dates: Whatever changes are done after the initial planning, you will make the changes only in Basic Start/Finish dates.
    So, in Project Planning board, if you enable Forecast and Basic dates with different color coding, you can clearly see the variation in the Project schedule.
    Hope this helps.

  • Planned and Actual costs at the Activity level

    Hi all,
          Can you tell me if there is a R/3 report which lists out the planned and actual costs for a project and displays it for each network and activity? I want these values at the activity level.
          I found a report which lists out these values for each network, but I cannot drilldown to the activity level. Please help.
    Thanks,
    Satyajit.

    Hi,
    There is setting in network type. Please go through transaction OPUV  i.e.
    Change view- Network type paramaeters : overview " Overview.
    Uner Network type parameters there is one radio button in front of ActvtyAcctAssgn. Just activate it.
    Hope this helps.
    Regards
    Tushar

  • Planned vs actual production report

    Hi,
    Which report is used for planned vs actual production information.
    Rajesh

    Hi
    COOIS will give all the standard order relating to production order. You can get the data in required way, by giving propoer input to the system through the front end screen
    Regards
    J.Saravan

Maybe you are looking for

  • How can I transfer some photos from PE11 to be saved on my new IPad?

    How can I transfer some photos from PE11 to be saved on my new IPad? I know I can use Adobe Revel but that relies on an Internet connection. The person I wish to show the photos do not have internet connection.

  • How can i keep the optimize settings in Muse

    Hello I just uploaded a web site www.coopdebici.com I was very carefully optimizing the images in adobe photoshop, and make them always at 100%. When the web site was oline i takes a lot to charge some images and i just realized that Muse increase a

  • Powerbook 160 Display Problems...!

    Alright, here's the Deal: I have a Powerbook 160 I just bought from a Yard sale, and one off of eBay. Yes, it's another couple of powerbooks! Just last summer I bought a 180 with a dead drive which I regret throwing out. It turns out that the one fro

  • Define column width using a variable

    Hi All, Is there a way to define the width of a specific column using a variable in an rtf template? I have a requirement that one column should fit it's (largest) content. Now my idea is to replace the static width in points with a variable, but see

  • Local Host Username & Password required???

    When I try to test the localhost by http://localhost:8500/ows/ or even http://127.0.0.1 ....... I am prompted to enter a username and a password... I have no idea why or what the username or password is. Is there a default that I am unaware of? or ho