Planned Delivery Cost in MIRO for different freight vendor

Hi,
Kindly share, how to get rid of above issue:
1) PO created with a freight condition (FRA1 with a different vendor assigned to it under item conditions tab)
2) GR done, & all accounting entries were OK, (including freight costs in FR1 or FR3)
3) while doing MIRO with selection Planned-Delivery-Cost, Amount & Qty fields are "Blank" and auto flowing from Clearing A/cs
I found this error in both Domestic or Import POs.
I've read many threads, but could not find a clear solutions for the same.
Plz help
Sankar

Hi,
Plz find screens.
Amount & Qty fields not flowing in MIRO from open GRIR/clearing account balance.

Similar Messages

Unplanned Delivery costs in MIRO for different Vendor

I have an annual PO and I invoice it with normal MIRO transaction.
At the same time I have one service which I want to be a unplanned delivery cost for this PO. This service will be assigned to the material account and it is for a different vendor.
Can I do it in MIRO creating only the value in the unplanned delivery cost and insert a different vendor? In OBYC this is assigned to UPF category.
Can you please help me?

Hello,
You can use transaction MIRO to do unplanned delivery costs.
You use "Subsequent Debit" and insert the PO number (equal to invoice). The system will show the lines of the PO that were already invoiced and in the tab "Details" you should change the Invoice Party and inser the value of the unplanned delivery costs in the field "Unpl. Del. Csts".
If you don't have the costs in the PO for different vendor you must create like this...with Subsequent Debit. Only if you have planned costs in the PO it is possible to do it invoice and costs in the same document for different vendors otherwise you must have 2 documents (invoice for the material vendor and subsequent debit for the other unplanned costs vendor).

GR wise Planned Delivery cost in MIRO

I receive my materials (ordered in a single PO) in several deliveries
(MIGO). The PO has a delivery condition in it. GR based IV is checked
in PO.
When I try to do invoice verification, total unsettled quantity is
proposed in one line.
I want separate lines for each Goods receipt for planned delivery cost
in MIRO.
For example :
1. Create a PO(GR based IV checked) for 100 KG/ PO has a delivery cost
viz. 10 INR per KG
2. Receive goods in 3 deliveries ( 10 kg, 20 kg and 30 kg).
3. Go for MIRO for planned delivery cost. here system is proposing 600
INR for 60kg in one line item.
We need 3 line line items - each corresponding to one GR.
(While this happens for MIRO for goods, for planned delivery cost it is
not happening).

How ever in MIRO, it will consider the total GR quantity and will propose accrodingly..
else u can make invoice with 3 different delivery notes, so that u will get 3 different invoices..
Please refer to this link for further explaination :
http://help.sap.com/saphelp_47x200/helpdata/en/b0/6cc62efd3311d2b4f3006094192bbb/frameset.htm
BR,
Krishna

About "planned delivery cost" in MIRO

Hi all,
If choose "2-planned delivery cost" in MIRO, I want to know if the credit limit will be applied the same as choosing "1-Goods/service items"? I know these are two different functions, but I want to know if the tolerence limit settings is effective to "2-planned delivery cost".
Thanks in advance.
Christina

yes it will
if both the vendors are same ie to say in the original document that gets defaulted during MIRO.
Regards
Sujoy

Defaulting Goods Items/Service Item + Planned Delivery Costs in MIRO

Hi,
How to defaulting Goods Items/Service Item + Planned Delivery Costs in MIRO.
Tks.

Hi ,
Create a variant in Tcode SHD0 and assign to the Tcode MIRO.
Regards
Ramesh Ch

Tab option for choosing Planned delivery cost in Miro screen

Hi all
I'm a new user in SAP system and I have a question as follows:on Miro screen, I do not see the tab, select Planned delivery cost, I think someone did somthing in system and made it hidden.it displayed above the layout tab, so I want to know how displays it on the screen?
Thanks for your help

Dear,
Please go into transaction MIRO
then on item level u can see One option with 3 selection criteria
1) goods/serv item
2) planned delivery cost
3) goods service + planned delivery
please select the 2 option
regards
amey

Planned delivery cost in MIRO

I have a PO. I have entered the freight condition as FRA1. The vendor for the condition is specified at the time of the GR. I create mnultiple GR for the PO line Item.
When I book the MIRO for the planned delivery cost the system does not propose the quantity and the amount. The GR based verification is checked in the vendor master data.
Please suggest me a way to do this? or is it a standard system.

Hi,
Please check if condition is defined in M/06 ,ACCRUALS option should be ticked - otherwise system will not create any seprate delivery cost document in system at the time of GR. Check Purchase Order History,seprate delivery cost should be appeared against the Purchase Order History
Also check ,in Pricing Procedure (m/08) ,accrual key should be available against delivery condition.
Or else check at the time of MIRO,Goods Items/ Delivery cost/both option should be selected.
Hope this will be helpful to you.
Thanks & Regards,
Sandesh Sawant

Change the sequence of planned delivery costs in MIRO

Dear Experts,
In import an import PO the various CVD & ACD conditions are maintained in the PO .
To enter the bill of entry , MIRO is used where the invoice is booked for planned delivery costs for the PO .
In MIRO , this planned delivery costs appear by default in certain sequence. I want to change this sequence .
eg by default the system shows :
Sec Ed cess on CVD
ACD
BCD
Ed cess on BCD
CVD
Ed cess on CVD
Sec Ed Cess on BCD
I want to change the seq of appearance in MIRO.
How is it possible
Pls guide
Regards
Anis

Dear Anis bazmi
You will get the conditions as you desire one below another in PO or MIRO if you have defined them exctly the same way in your calculation schema steps, other wise there is no way in getting the way you want and it can not be changed either in PO stage or in MIRO also.
Just check, when you are processing MIRO, please select Planned delivery Costs form the menu below instead of the combination of both.
Regards

Planned delivery cost in MIRO against DC

Hi All,
Is it possible to pay Planned delivery cost against the Delivery challan reference. Is there any standard setting for that.
Helpful answers will be rewarded.
Regards
Dhinakar.

Hi All,
Is it possible to pay Planned delivery charges using Delivery note reference.
Regards
Dhinakar

Tax code error while posting Planned delivery costs in Import Scenario

Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
Durga

Is you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan

MIRO for Planned delivery cost

Hello,
Its Raw material PO with Freight & unloading Charges codition.Excise duty applicable only for Raw material .
service tax applicable for Freight & unloading charges vendor.
while booking MIRO for Raw material ,excise accounts should be hit & for Planned delivery cost service accounts shoud hit.
but While Posting Planned delivery cost tax code for which sevice tax code has been used, excise offset account is getting Posted together with service tax accounts.
How to Post MIRO for Planned delivery cost with only service tax accounts.
Regards,
Jyoti

Hi Deva,
Is the problem about the rounding of the value?
If so I sugest you modify the rounding scheme of the conditions to 'round up' in the condition master. In this case 0,004 would become 0,01. It's important to know that currency is always posted with two decimal numbers, but you can always do this: 1000units cost 4$ (for example).
For what I know you cannot post a value in invoices for less than 0,01$.
Give more feedback.

Planned delivery cost for the scheduling agreement

Hi Experts
1. I have an requirement to post Invoice ver. for the Planned delivery cost (freight,customs duty,CVD etc) against the Scheduling Agreement just like Import Purchases with checking off the GR Based IV Indicator before doing the GR
I tried it but its giving me that no delivery costs are Planned in the Scheduling agreements it runs fine in case of the PO because PO is a time independent. Please inform how to post the same for schedule agreement with time dependent indicator on. I tried switching off the time dependent indicator and the system allowed, but my requirement is to Post I.V for the delivery cost with the time dependent indicator on.
Appreciate if you can suggest something in this case Urgently .
2. Aother issue is we have some uploaded Scheduling agreement from legacy system with Time dependent conditions. For this we need to post planned delivery cost in Miro. Since the system is not allowing to post, how to about for this. Shall we enter the delivery cost in unplanned delivery cost in Miro and post. Please suggest if any alternate solution is available.
Regards
Arvind

Hi,
As you know if the delivery cost document is not posted during GR the
delivery cost is not proposed during invoice (MIRO). Planned delivery
cost will be proposed in invoice only when there are records in EKBZ
table. The EKBZ table will be updated when delivery cost is posted
during GR itself.
Please ensure in the PO itself thatr the conditions have been defined
properly with the relevant amounts and values.
During GR when planned delivery cost conditions are present in PO,
system checks for values in amount field. Then only appropriate
calculations will be done for delivery cost and planned delivery cost
document will posted during GR and hence updates EKBZ table.
Solution to this issue is described in below steps,
1) reverse the invoice document
2) reverse GR document.
3) You have to give values in amount field in relevant conditions ZGDS
   in the PO.
   If you face any issues changing the values, delete above conditions
   and put it again manually and give values in amount field also.
4) Post GR once again, delivery cost document will also be posted.
   You can check it in PO history.
5) During invoice select Item + planned delivery cost and post the
   invoice. If you need planned delivery cost to be posted separately,
   then you can post individual invoice for item and delivery cost.
Please note it is not possible to post delivery costs for documents with
multiple accountassignments.
For your second question, I am afraid I can not answer. Please open a new ntry in the forum, so that someone else can answer it.
Best Regards,
Arminda Jack

Not to Post Planned Delivery Cost in IV before MIGO

Dear Experts,
We are maintaining the Delivery cost Condition values for different vendors in Purchase Order and we are selecting the GR Based IV check box. At the time of MIRO before making MIGO (Goods receipt) it will not allow to Post Incoming Invoice if I select Goods/Service items or both Goods/Service items & Planned Delivery Cost but it will allow if we select only Planned Delivery Cost to Post.
Kindly suggest us if anybody have the solution to restrict to Post the Planned Delivery cost before posting the Goods Receipt (MIGO).
Thanks & regards,
Dhanu

Dear,
First u do the MIGO, After that post the Material IV with goods/service, after that u again do IV for planned delivery cost selection of Planned delivery cost.
Thanks,
If this is helpful for u then reward me.

Planned Delivery Costs

Hi All
Please guide me on how to capture Planned Delivery Costs in PO
Regards
Jagadish

Hi,
you have to enter Planned delivery cost in Po using different condition type. you can also select different vendors for different conditions by going to condition detail and enter vendor.
then for planned delivery cost you can do MIro before goods receipt if you require.
Regards,
Vijay

Invoice Verification for Planned Delivery Cost (Freight Vendor)

Dear all
I have created the PO with vendor A for material M and the freight vendor is B. And now I would like to know invoice posting for vendor A for mateiral M and Vendor B for freight.
During PO creation:
1. I enter the Vendor A for PO.
2. I maintain Freight Condition at the Header Condition. And enter the freight Vendor B for that Condition.
During GR:
1. GR with reference to this PO
During Invoice:
1. MIRO reference to this PO
    (a) To do Invoice for Vendor A, select Goods and Service and post
    (b) Subsequently, MIRO reference PO again, and do invoice for Freight Vendor B, select Planned
         Delivery Cost
Questions:
(a) What is the G/L account posting during GR and Invoice? I am particularly interested in the Invoice G/L account posting for both different vendor, assuming I am using the standard sap Account Determination Setting
(b) Instead of following the above approach to do invoice twice for different vendor A & B, can I first Invoice reference PO for Vendor A, and then subsequently use Subsequent Debit reference PO?
Points will be awarded handsomely.
thanks

Hello
Purchase order: 100 pcs @ 1.3/pc
Planned delivery costs: 0.10/pc
Goods receipt for that PO: 100 pc
A/C postings @ GR
Stock account: 140 Dr
GR/IR clearing: 130 Cr
Freight clearing: 10 Cr
Invoice 100 pc @ 1.3/pc=130.00
      freight @ 0.10/pc= 10.00
          Total =140.00
A/C posting @ IR
Vendor a/c's: 140 Cr (130 for Goods vendor and 10 for freight vendor)
GR/IR clearing: 130 Dr
Freight clearing: 10 Dr
Since both are different vendors you have to credit the goods value to vendor A and freight charges to vendor B, you have to do them separately.
Regards
Gregory Mathews

Planned Delivery Cost in MIRO for different freight vendor

Similar Messages

Maybe you are looking for