Planned delivery cost payed before GR

Hi all experts,
We are analyzing to use transportation for planned delivery costs and freight.
We will have multiple legs (steps) in a route and let's say that the end to end transport will take approximately 30 days to complete but we would like to pay for some of the legs (transport) that have already occurred.
So the question is: is it possible to post planned cost for the entire route and pay for them in parts before the GR? Is there any restriction that we should take into consideration?
Thanks in advance

Hi,
you can not change or introduce delivery cost after gr, partial gr. However you can add new condition for insurance after gr.
regards
Ishu

Similar Messages

Not to Post Planned Delivery Cost in IV before MIGO

Dear Experts,
We are maintaining the Delivery cost Condition values for different vendors in Purchase Order and we are selecting the GR Based IV check box. At the time of MIRO before making MIGO (Goods receipt) it will not allow to Post Incoming Invoice if I select Goods/Service items or both Goods/Service items & Planned Delivery Cost but it will allow if we select only Planned Delivery Cost to Post.
Kindly suggest us if anybody have the solution to restrict to Post the Planned Delivery cost before posting the Goods Receipt (MIGO).
Thanks & regards,
Dhanu

Dear,
First u do the MIGO, After that post the Material IV with goods/service, after that u again do IV for planned delivery cost selection of Planned delivery cost.
Thanks,
If this is helpful for u then reward me.

Planned delivery cost(in PO), but like to pay other vendor(in MIRO). How?

To someone who knows planned delivery cost very well:
I have 3 points.
1. Planned delivery cost(in PO), but like to pay other vendor(in MIRO). How?
2. Condition type for Planned delivery cost, like FRA1, FRB1,ect, have Acc. key& Accrual key like FRE, FR1 in PO pricing procedure(calculation schema), it controls dlv cost value into Mat. stock value, but we like to post those value into a expense account, it is possible by cond. type FRA1 or FRB1, how?
3. I did testing, I have impression, for cond.type of planned dlv cost, FRA1 or FRB1, SAP always credits the dlv cost value into Accrual/provision clearing account(after GR) and debit to clear the account after MIRO. Is it correct? If yes, why in condition type configuration, it has an indicator Accrual , this indicator seems to have no difference whether it selected or non-selected.
Thanks,
[email protected]

1)while doing the miro,in the details tab give Inv. Party as ur other vendor code.
also at the right hand side where u can select the layout,just above it choose planned delivery cost and proceed with ur miro.
regards,
indranil

Report for Planned Delivery Costs

Hi,
Is there any Report for Planned delivery costs per month/day.One of our client needs separate report for frieght charges so that he can be able to pay service tax (GTA) for the same.
Thanks
Prasad

Hai,
Did you check thro' Tcode MIR5.

Planned delivery cost for the scheduling agreement

Hi Experts
1. I have an requirement to post Invoice ver. for the Planned delivery cost (freight,customs duty,CVD etc) against the Scheduling Agreement just like Import Purchases with checking off the GR Based IV Indicator before doing the GR
I tried it but its giving me that no delivery costs are Planned in the Scheduling agreements it runs fine in case of the PO because PO is a time independent. Please inform how to post the same for schedule agreement with time dependent indicator on. I tried switching off the time dependent indicator and the system allowed, but my requirement is to Post I.V for the delivery cost with the time dependent indicator on.
Appreciate if you can suggest something in this case Urgently .
2. Aother issue is we have some uploaded Scheduling agreement from legacy system with Time dependent conditions. For this we need to post planned delivery cost in Miro. Since the system is not allowing to post, how to about for this. Shall we enter the delivery cost in unplanned delivery cost in Miro and post. Please suggest if any alternate solution is available.
Regards
Arvind

Hi,
As you know if the delivery cost document is not posted during GR the
delivery cost is not proposed during invoice (MIRO). Planned delivery
cost will be proposed in invoice only when there are records in EKBZ
table. The EKBZ table will be updated when delivery cost is posted
during GR itself.
Please ensure in the PO itself thatr the conditions have been defined
properly with the relevant amounts and values.
During GR when planned delivery cost conditions are present in PO,
system checks for values in amount field. Then only appropriate
calculations will be done for delivery cost and planned delivery cost
document will posted during GR and hence updates EKBZ table.
Solution to this issue is described in below steps,
1) reverse the invoice document
2) reverse GR document.
3) You have to give values in amount field in relevant conditions ZGDS
   in the PO.
   If you face any issues changing the values, delete above conditions
   and put it again manually and give values in amount field also.
4) Post GR once again, delivery cost document will also be posted.
   You can check it in PO history.
5) During invoice select Item + planned delivery cost and post the
   invoice. If you need planned delivery cost to be posted separately,
   then you can post individual invoice for item and delivery cost.
Please note it is not possible to post delivery costs for documents with
multiple accountassignments.
For your second question, I am afraid I can not answer. Please open a new ntry in the forum, so that someone else can answer it.
Best Regards,
Arminda Jack

Issue with reversal of MIRO for Planned Delivery Cost

Hi Xperts
We have found out an issue while reversing the MIRO document for Planned Del costs. When we have done the MIRO, the accounting entry got correctly posted with correct account keys.Conditions are not inventoried.
However, when we had reversed it - the stock account got hit.Do not understand, why that happened.Do you have any clue?
1. Suppose we have done the MIRO for Del Cost & then performed GR.Now Stock has already consumed & afterwards we have found that the MIRO for Del Cost is wrong & reverse - in this scenario shall the Stock account will get a hit????
2. I have maintained Price Control "V" in Material Master.However, I have maintained a Standard Price by mistake.In that case shall SAP ignores the MAP & takes Standard Price into account & post PRD??
Regards
Soumick

Hi,
Before checking Planned Delivery costs accounting documents in MIRO posting and MIRO cancellation document, 1st check how Planned Delivery costs designed for your procurement process.
Use t.code:ME23N, check your Purchase order
Option-1:
Is Planned Delivery costs added to inventory account and at the same time Planned Delivery costs posted to Separate Planned Delivery costs G/L account.
OR
Option-2:
Is Planned Delivery costs posted to Planned Delivery costs G/L account ONLY
OR
Option-3:
Is Planned Delivery costs added to inventory account ONLY.
Based the above one setting, system will post goods receipt and invoice posting document with corresponding accounting entries. Also cancellation of invoice posting document refer to these setting.But account posting depends on price control available in material master.
NOTE:
Standard price procedure (price control “S”):The system carries out all stock postings at a price defined in the material master. Variances in price are posted to price difference accounts.
Moving average price (price control “V”): The system valuates goods receipts with the purchase order price and goods issues with the current moving average price.Differences in price between the purchase order price and the invoice are posted directly to the relevant stock account if there is sufficient stock coverage.
Regards,
Biju K

Exchange Rate for planned delivery cost

Hi
In one PO ( Document type NB with item category std) exchange rate for planned delivery charges ( Condition type FRC1) is calculated considering base date as document date of PO.( Exchange Rate is not fixed) while doing Goods Receipt
In other PO ( Document type NB with item category L -subcontracting ) exchange rate for planned delivery charges ( Condition type FRB1) is calculated considering base date as posting date of GR.( Exchange Rate is not fixed)
Can anyone tell why ?

Dear Murugan
I wish to putforth the below check for you to solve the issue.
You told that Intially while creating the PO, your supply vendor and freight vendors are different, please check did you enter the vendor code in the freight item condition details. If yes then you have two invoicing parties for the PO.
Now you also told that, you have carried out MIGO for the PO line item which which has Freight also as an additional condition type. That means for the PO line item your GR have been completed or partly done. If you have done this then how did you change the freight vendor in PO after GR for the item , system does not allow that as you have already carried out the the GRN.
To avoid all such cases of freight vendor change, the best solution is to change the vendor before GRN itself and assign the right vendor in the item condition of the PO,then proceed forthe GRN.
For your case please cancell the GRN also since you have already cancelled the Invoice.
Assign the right Freignt vendor , then proceed for MIGO. Once done In MIRO go for invoice and select goods/service items from the selection menu and process it for the supply vendor.
Then again you can go for MIRO and select planned delivery cost from the drop down and process it.
The above can be done combined also and in any sequence also , there are no holds upon that.
Regds
Sam

Planned Delivery cost (Freight)

Dear all,
In a PO I have a planned delivery cost which is 500EUR.
But in Invoice vendor charged as 800EUR .
What should I do if I want to pay 800 as freight charge as per invoice.
Thanks in advance
Shuvankar

Hi
1)If you have sufficient tolerences set then you can pass the invoice for 800 EUR in which case the accounting entry would be
Vendor account Cr 800
Freight clearing account Dr 500
material /price difference account Dr 300
2)you could also pass a subsequent debit for the remaining 300 EUR in MIRO where the accounting entry would be
Vendor acc Cr 300
Material /price difference account Dr 300
Regards
Sandeep

Planned delivery cost in MIRO against DC

Hi All,
Is it possible to pay Planned delivery cost against the Delivery challan reference. Is there any standard setting for that.
Helpful answers will be rewarded.
Regards
Dhinakar.

Hi All,
Is it possible to pay Planned delivery charges using Delivery note reference.
Regards
Dhinakar

Return delivery and Planned delivery costs

Hi guru
scenario: I create a PO (Vendor A) with Planned delivery costs on order item.
I store planned delivery costs in the purchase order item on the Item conditions screen. ( I enter a different vendor for "freight vendor" - Vendor B, select the desired condition on the condition screen and choose Goto - Details. Overwrite the content of the Vendor field).
I create GR. OK
I create a return delivery (122) but I have to pay invoice for "freight vendor" to Vendor B.
Can I make it?

Hi,
At the time of GR;
Stock A/c - 110 - Dr
GR/IR Clearing - 100 - Cr
Freight Clearing - 10 - Cr
And when you return it then same entry gets reversed.
So at the time of MIRO, it will not propose the freight value automatically but you refer the PO and select "Planned delivery cost" and then under "GL Account" Tab, enter Freight Expense A/c - Dr and "Simulate", it will credit vendor and then Post

Planned delivery cost & sub-sequent settlements

hi ,
what is meant by planned delivery cost ?
what is meant by sub-sequent settlements ?
when they are useful in MM
regards

Hi
<b>Planned delivery costs</b> are the costs agreed with the vendor or goods supplier before the purchase order is created. You enter these as conditions in the purchase order.
Planned delivery costs can be differentiated as follows:
Origin of Costs
Freight charges
Customs charges
Calculation of Costs
Fixed amount, irrespective of delivered quantity
Quantity-dependent amount
<b>Subsequent adjustment</b>
In sub contracting scenario After the subcontractor had delivered the ordered material , you post the goods receipt to the subcontract PO. The system determines the necessary components for each purchase order item and creates for each component a goods issue item with the quantity that was determined in the purchase order
If the vendor informs you after these postings that a greater or smaller quantity of the subcontracting components was actually consumed than planned in the purchase order, you must post a subsequent adjustment to correct the component consumption.
If the component is a by-product, you must post the corrected by-product receipt (excess receipt) or by-product issue (short receipt)
Similary there is a subsequent credit / debit carried out when an additional invoice or credit memo is received for a transaction that has already been invoiced in LIV process
Thanks & regards
Kishore

Planned Delivery Costs

Hi All
Please guide me on how to capture Planned Delivery Costs in PO
Regards
Jagadish

Hi,
you have to enter Planned delivery cost in Po using different condition type. you can also select different vendors for different conditions by going to condition detail and enter vendor.
then for planned delivery cost you can do MIro before goods receipt if you require.
Regards,
Vijay

Tax code error while posting Planned delivery costs in Import Scenario

Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
Durga

Is you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan

Bapi to post planned delivery cost of a purchase order

Hi every body,
         Can anybody please give me the full details of the planned delivery cost data
to post with BAPI_INCOMINGINVOICE_CREATE
what are the manditory fields,
I am using the following code , but a few are posting , remaining r not posting
but when I post the same through MIRO it is posted what is difference
this error was came
ERROR: enter good reciept data only when working with GR-based IV
REPORT ZBAPI_MIRO                              .
tables: ekko,ekbe,ekpo,lfa1,EKBZ,t000.
data: itemdata like BAPI_INCINV_CREATE_ITEM occurs 0 with header line,
headerdata like BAPI_INCINV_CREATE_HEADER occurs 0 with header line,
     return like BAPIRET2 occurs 0 with header line,
     DOC_NO LIKE BAPI_INCINV_FLD-INV_DOC_NO,
     FISC_YEAR LIKE BAPI_INCINV_FLD-FISC_YEAR.
DATA:error_flag.
data: item_data like EK08BN occurs 0 with header line.
data: begin of itab occurs 0,
             p_order like ekpo-ebeln,
             p_item like ekpo-ebelp,
             p_ctype like konv-kschl,
             p_lifnr like lfa1-lifnr,
      end of itab.
data: order(10) type N,
      vendor(10) type N.
data: begin of it_doc occurs 0,
            DOC_NO LIKE BAPI_INCINV_FLD-INV_DOC_NO,
            p_order like ekko-ebeln,
      end of it_doc.
PARAMETERS: fn LIKE rlgrap-filename OBLIGATORY.
DATA: FN1 TYPE STRING,
     l .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR fn. "p_file.
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            field_name = 'FN'
       IMPORTING
            file_name = fn.
START-OF-SELECTION.
   FN1 = FN.
PERFORM upload.
loop at itab.
CLEAR: EKBZ,EKPO,LFA1,ITEM_DATA,HEADERDATA,itemdata.
REFRESH:itemdata,HEADERDATA,ITEM_DATA.
order = itab-p_order.
itab-p_order = order.
vendor = itab-P_lifnr.
itab-p_lifnr = vendor.
select single * from ekbz where ebeln = order
                           and ebelp = itab-p_item
                          and kschl = itab-p_ctype
                          and bewtp = 'F'.
select single * from ekpo where ebeln = order
                       and ebelp = itab-p_item.
SELECT SINGLE * FROM LFA1 WHERE LIFNR = vendor.
clear: item_data.
refresh:item_data.
call function 'ME_READ_COND_INVOICE'
   exporting
   I_BUDAT            =
    I_EBELN            = itab-p_order
    I_EBELP            = itab-p_item
   I_FRBNR            = ' '
     i_lifnr            = ' '
   I_XBLNR            = ' '
   RE_KURSF           =
   RE_WAERS           =
   I_RESWK            = ' '
   I_EKKI             = 'X'
   I_BUBIS            =
   RE_WWERT           =
   XEK08B_FLAG        =
   I_BELNR            =
   I_BUZEI            =
   I_READ_KRUEK       = ' '
   I_DISPLAY          = ' '
TABLES
    XEK08BN            = item_data
   XEK08BN_CURR       =
read table item_data with key kschl = itab-P_ctype.
headerdata-INVOICE_IND = 'X'.
headerdata-DOC_TYPE = 'KR'.
headerdata-DOC_DATE = ekbz-budat.
headerdata-PSTNG_DATE = SY-DATUM.
headerdata-REF_DOC_NO = itab-P_ORDER.
headerdata-COMP_CODE = 'HPL'.
headerdata-DIFF_INV = itab-p_lifnr.
headerdata-CURRENCY_ISO = ekbz-waers.
headerdata-GROSS_AMOUNT = item_data-WEWWR - item_data-AREWR .
headerdata-BLINE_DATE = SY-DATUM.
headerdata-DEL_COSTS_TAXC = 'V0'.
headerdata-PO_REF_NO = itab-P_ORDER.
headerdata-bus_area = 'OTHR'.
headerdata-ITEM_TEXT = LFA1-NAME1.
*headerdata-HEADER_TXT = .
headerdata-ALLOC_NMBR = itab-P_ORDER.
APPEND HEADERDATA.
CLEAR HEADERDATA.
itemdata-INVOICE_DOC_ITEM = '00001' .
itemdata-PO_NUMBER = itab-P_ORDER.
itemdata-PO_ITEM = itab-P_ITEM.
*itemdata-REF_DOC = ekbz-belnr.
itemdata-REF_DOC_YEAR = ekbz-gjahr.
itemdata-REF_DOC_IT = itab-P_ITEM.
itemdata-TAX_CODE = 'V0'.
itemdata-ITEM_AMOUNT = item_data-WEWWR - item_data-AREWR .
itemdata-QUANTITY = item_data-BPWEM - item_data-BPREM .
itemdata-PO_UNIT = ekpo-meins.
itemdata-PO_PR_UOM = ekpo-meins.
itemdata-COND_TYPE = itab-P_CTYPE.
*itemdata-ITEM_TEXT = .
append itemdata.
clear itemdata.
CALL FUNCTION 'BAPI_INCOMINGINVOICE_CREATE'
EXPORTING
    HEADERDATA       = HEADERDATA
IMPORTING
    INVOICEDOCNUMBER = DOC_NO
    FISCALYEAR       = FISC_YEAR
TABLES
    ITEMDATA         = ITEMDATA
   ACCOUNTINGDATA   = I_ACCOUNTINGDATA
   TAXDATA          = I_TAX
    RETURN           = RETURN.
if sy-subrc <> 0.
message e999(re) with 'Problem occured'.
else.
loop at return.
    if not return is initial.
     clear bapi_retn_info.
     move-corresponding return to bapi_retn_info.
      if return-type = 'A' or return-type = 'E'.
        error_flag = 'X'.
      endif.
     append bapi_retn_info.
    endif.
endloop.
if error_flag = 'X'.
   message e999(re) with 'Problem occured'.
    rollback work.
else.
      Return Table from BAPI call is empty
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        WAIT   = 'X'
      IMPORTING
        RETURN = RETURN.
endif.
endif.
       write:/ 'Document no :', doc_no.
       it_doc-doc_no = doc_no.
       it_doc-p_order = itab-p_order.
       append it_doc.
       CLEAR IT_DOC.
endloop.
loop at it_doc.
   if it_doc-doc_no = ' '.
      write:/ 'purchase order not posted ' , it_doc-p_order.
   else.
   write:/ 'document no:' , it_doc-doc_no, 'p.order:' , it_doc-p_order.
endif.
endloop.
*&      Form upload
      text
--> p1        text
<-- p2        text
form upload .
CALL function 'GUI_UPLOAD'
exporting
    filename                      = FN1
   FILETYPE                      = 'ASC'
HAS_FIELD_SEPARATOR           = ' '
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
tables
    data_tab                      = ITAB
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
endform.                    " upload

I think you need to implement user-exit EXIT_SAPMM06E_012 of enhancement MM06E005.
Look in OSS with seach term MM06E005 to get some examples.
Note310154 "ME21N/ME51N: Customer-specific check, generating error log" has some examples.
You should use the macros to set errors/warnings
Example:
mmpur_business_obj_id pt_ekpo-id.
mmpur_metafield mmmfd_partners.
mmpur_message_forced 'W' '00' '208' text-001 '' '' ''.
regards,
JG

Planned Delivery Cost in MIRO for different freight vendor

Hi,
Kindly share, how to get rid of above issue:
1) PO created with a freight condition (FRA1 with a different vendor assigned to it under item conditions tab)
2) GR done, & all accounting entries were OK, (including freight costs in FR1 or FR3)
3) while doing MIRO with selection Planned-Delivery-Cost, Amount & Qty fields are "Blank" and auto flowing from Clearing A/cs
I found this error in both Domestic or Import POs.
I've read many threads, but could not find a clear solutions for the same.
Plz help
Sankar

Hi,
Plz find screens.
Amount & Qty fields not flowing in MIRO from open GRIR/clearing account balance.

Planned delivery cost payed before GR

Similar Messages

Maybe you are looking for