Planned depreciation not showing for posting period

hi,
I have query for planned depreciation.
my company code is having following setting.
1. check "dep to the day" is there.
2. in Fiscal year Variant for the period 7 & 8 the setting is as below.
month day period
8          1      7
8          29    8
so the planned depreciation is not showing in period 8, in period 7 it is showing double (for period 7 & 8). this is the same for posted depreciation also.
please suggest if any setting available for the same.
Thanks,

Why do you have your both periods 7 & 8 setting in the same month 8 ??
Every period and month should be exclusive and look something like this > http://www.saptechies.com/userfiles/Define-Business-Area-5.jpg
Please post your query properly if you don't get this explanation.
Zub

Similar Messages

  • Planned depreciation not showing in the AW01n for current FY

    Hi Experts,
    I have an issue on Planned Depreciation and the issue as below.
    I have created an Asset with Dep.start date is 10.05.2011 and my Fiscal year is Jan- Dec with 445 posting periods. I have posted Acquisition with the value of 10,000 through F-90. When i check the Asset Explorer through AW01n its not showing Planned deprecation in the Posted Values tab and in Comparisons tab its showing the Dep. from 2012 onwards till useful life and here in 2012 its showing the dep.value from May to Dec only, and also its not showing Dep.value for 2011 year ( showing blank).
    If i post the acquistion in 2010, its showing the depreciation from 2011 onwards and also for 2010 year its not showing any planned deprecation.
    In Dep. calculation it means  % of dep. and every thing is ok. ( its showing the values as per the % stated in dep.key)
    I have posted the same scenario to another company code and its showing planned deprecation for 2011 year.
    May i know the missed config settings to view planned depreciation.
    kindly provide your valuable solution
    thanks,
    jagadish.P

    Hi,
    When i click the Dep. calculation its showing as below
    Type     To Period         Period Factor     Percentage     Curr.APC
    N                 164             0.45055                     0                 0
    N                 364             0.54945                 0.125               45,000
    thanks & regards,
    Gopi.P

  • POSTING ERROR-MESSAGE POSTING BALANCE NOT CLEARED FOR THE PERIOD 2/2008A

    Hi
    I have a problem in payroll posting.  While posting for one employee's persn number rejected and gave a message as Posting Balance not cleared for the period 2/2008A.  To come out of the problem I changed the Payroll status record using pu03 changed the Erliest Retro date as 01.06.2008.  Again tried to post  but not posted again same Message displayed.  After changing the Erliest Retro record I have not run the payroll for the particular employee.  Is it required to run the payroll for the employee after changing the status in PU03.  Request to guide on this
    Thanks
    EKP Yadav

    Hi there
    The posting may be out of balance for the employee because their credits dont equal their debits...
    Do a test posting for the employee with the log on, this will tell you what amounts are being posted - and should give you an inidcation of where the balance is not cleared...
    Yes, you would have to re-run the employee if you'd changed the retro date in PU03, but I dont think that will fix your posting problem....Should the employee have retroe'd?
    From what I have seen, just changing the control record doesn't usually fix an out-of balance..there is usually another reason....eg wagetype incorrectly posting to the wrong number of  accounts....or a missing wagetype on the employee (eg bank details...no /559 for the net pay to go to).
    Cheers
    Mary

  • Idoc-51:Accounting transaction not permitted for posting in FI/CO

    Hi,
    Message type FIDCC2
    Basic type FIDCCP02
    Process code FID2
    When i try to post for F-02, through WE19, above idoc, it is showing the 51 error: Accounting transaction not permitted for posting in FI/CO
    I'm using the following fields:
    E1FIKPF : FI Document Header (BKPF)
    BUKRS : Name of global company code
    GJAHR : Fiscal Year
    BLART : Document Type
    BLDAT : Document Date in Document
    BUDAT : Posting Date in the Document
    MONAT : Fiscal Period
    TCODE : Transaction Code
    WAERS : Currency Key
    HWAER : Local Currency
    E1FISEG : FI Document Item (BSEG) -1
    BUZEI : Number of Line Item Within Accounting Document
    BSCHL : Posting Key - 40
    DMBTR : Amount in Local Currency
    KOSTL : Cost Center
    HKONT : General Ledger Account
    WERKS : Site
    E1FISEG : FI Document Item (BSEG) -2
    BUZEI : Number of Line Item Within Accounting Document
    BSCHL : Posting Key - 50
    DMBTR : Amount in Local Currency
    HKONT : General Ledger Account
    WERKS : Site
    Pls guide in fixing this.
    rgds,
    balu

    Hi 
    What is the solution , please let us know ? since we have faced the same error.
    Regards
    Bhavana

  • Accounting transaction not permitted for posting in FI/CO

    Hi,
    For inbound idoc triggering,
    Message type FIDCC2
    Basic type FIDCCP02
    Process code FID2
    When i try to post for F-02(or FB01), through WE19, above idoc, it is showing the 51 error: Accounting transaction not permitted for posting in FI/CO
    I'm using the following fields:
    E1FIKPF : FI Document Header (BKPF)
    BUKRS : Name of global company code
    GJAHR : Fiscal Year
    BLART : Document Type - SA
    BLDAT : Document Date in Document
    BUDAT : Posting Date in the Document
    MONAT : Fiscal Period - 05
    TCODE : Transaction Code - FB01
    WAERS : Currency Key
    HWAER : Local Currency
    GLVOR : Business Transaction - RFBU
    E1FISEG : FI Document Item (BSEG) -1
    BUZEI : Number of Line Item Within Accounting Document
    BSCHL : Posting Key - 40
    DMBTR : Amount in Local Currency
    KOSTL : Cost Center
    HKONT : General Ledger Account
    WERKS : Site
    E1FISEG : FI Document Item (BSEG) -2
    BUZEI : Number of Line Item Within Accounting Document
    BSCHL : Posting Key - 50
    DMBTR : Amount in Local Currency
    HKONT : General Ledger Account
    WERKS : Site
    For which fields u've triggered successfully, pls help in resolving the same.
    rgds,
    balu

    Hi,
    i appreciate for your quick reply...
    i've applied the code corrections in the FM FI_IDOC_PREPARE , but still same error coming.
    tnx n rgds,
    balu

  • SharePoint 2010 List View Web Part not showing for read-only users?

    Hello all,
    I have List View Webparts on my Blank Web Part page, and it's not showing for Read-Only users.
    Is this intended by Microsoft or is it a bug?
    Thank you!

    Hi,
    According to your post, my understanding is that the read only user could not see the list view web part.
    Per my knowledge, the issue may be cause that the user do not have the proper permission for the list.
    1. Check whether the user can access the list.
    2. Check whether the user can view all the items instead of partial items in the list.
    3. Check whether there are some fields refer to other lists or terms, especially the lookup field or managed metadata filed.
         If that is the case, make sure the user can access the lookup list.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Document flow not showing material posted details in maint order

    Dear Frnds,
         In the refurbishment order document flow is not showing material posting documents. Plz guide me to correct the issue. Thanks for all your cooperation.
    Guruprasad KS

    Dear Thygarajan,
    Thx for ur reply. Goods issue button is been ticked in "Define Documentation for Goods Movements for the Order". Still same issue. It is working in different client so i hope not an IMG issues.Plz give ur valuable feedback.
    Guru

  • Data column (for posting period) converted to COMPARISON COLUMN

    Hi all,
    I use 'posting period'(derived from fiscal period/year) in the data column and assigned CHAR-posting period to a variable (the value is 1.2.3....12) in the planning level.
    When I execute my layout, I got an error message: Data column 2 will be converted into a comparison column.
    Diagnosis:
    You have entered variable ZFIU004 in data column 2 and provided it with an offset. This results in values arising for variable ZFIU004, which are no longer within the selection, which was defined for the variable.
    Can someone please advise me?

    Hi,
    What is the selection maintained for posting period on the level.
    thanks

  • HT1937 I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

    I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

    i have the same problem. I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed. At this time does not changed my plan yet. I have the reference number of the bank for the transaction.
    <Email Edited by Host>

  • Tables for posting period check

    Hi,
    Can somebody tell me the tables for posting period check for tcodes F-63 and MIR7. I need to check whether the posting period is open when uploading data to these tcodes.
    Arun Mohan

    Use FM <b>FI_PERIOD_CHECK</b>
    Check this out for the same
    http://sap4.com/wiki/index.php?title=FI_PERIOD_CHECK
    Regards,
    Santosh

  • Project with profit center was not created for entire period

    Hi everybody,
    I need a help with a problem here.
    The alert mesage "project with profit center was not created for entire period" was displayed.
    Then I searched for the creation dates and the profit center was created before the project gets its firsts postings. Therefore, some line itens don't exist in profit center (ledgers).
    My two questions:
    The first one, is it possible to input line itens in a retroactive way?
    Everytime I need to use the project master data this alert is displayed. How can I fix avoid this message?
    Thanks,

    Hi,
    Regarding your issue, it is theoretically possible to reverse all settlements up to the start of the project and then to settle again it
    is a must to check in standard if the profit center is valid from the project start date onwards.
    Check the attached note 1048945.
    The system generates error message KM700 ('Profit center <PRCTR> does not exist for <date>') when you enter a profit center on a project definition if the profit center is not valid in the entire period between the basic start and the basic finish date of the project definition . However, only one warning message should only be generated in this case.
    regards
    Waman

  • SPA3000 F/W 3.1.20(GW) last digit repetition within the dial plan is not working for gateway 0-4

    H/W: SPA3000
    F/W: 3.1.20(GW)
    Problem: The last digit repetition within the dial plan is not working for gateway 0-4.
    Line 1 Dial Plan: (****|<#,xx.<:@gw1>|1747xxxxxxxx.<:@gw1>)
    Dial "17474743246#" which works for gw1.
    Dial "#17474743246" which also works for gw1.
    Dial "17474743246" which doesn't work and actually goes through VoIP 1 but not gw1.
    It results in I have to specify a fixed number of digits for gw0-gw4 in the dial plan or it won't works. This could be very difficult for international calls.
    Is there any way to specify Interdigit Short Timer with <:@gw0>?
    BTW, it's strange that I have to include (****) in the dial plan to enter IVR. Without it I can't even hear any sound coming from gw1 (SIPphone). Maybe the SPA needs a factory reset. The test dial plan might look like,
    S:4,(****|*xxx.|[2-9]|xxxxx|*0<:@gw1>|1747xxxxxxx<:@gw1>|1408xxxxxxx<:@gw0>|xxxxxxxxxxxxxxxxxxxx.!)
    The last barring sequence "xxxxxxxxxxxxxxxxxxxx!" is to make sure the Interdigit Short Timer works after the last digit dialed otherwise the number will be transmitted immediately which is not preferred.

    IMHO , if there's a need for you to include *** on the dial plan to enter the IVR menu there might be a need to reset the unit.
    I believe that you can set the interdigit timer by including that on the dial plan ie: xxxxS0 just like on a hotline, i just never had a chance to try including that syntax when invoking gw0 on the dial plan , but i guess you may give it a try.

  • 2013 Custom Web Parts in Page Layouts not showing for users

    Custom Web Parts in Page Layouts not showing for users
    I have created a master page in the root site collection for a subsite I am developing. I created content types and custom page layouts for the pages within the subsite.
    I used the snippet tool in the design manager to create web parts and page field markup which I copied into the custom layout HTML pages in the root site collection. For instance I have an image viewer web part that I place there to serve as a section title.
    The problem is that I can see all these customer layout page parts no problem but my users cannot. This leads me to believe its permissions, I am site owner of both the subsite and root site collection.
    The users that cannot see the web parts are site members of the site and restricted read users on the root site collection (where the layouts are stored).
    What gives I'm finding it hard to understand why a snipet generated web part wouldn't show in all pages created from that layout page.
    Any help would be appreciated, Havent found anything on this issue online. weird.

    It is a permission issue indeed. Fix is simple, make sure you check out the page layout page, then check it back in as published version.
    John Architect

  • My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this?

    My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?

    Apple Support (formerly ExpressLane):
    https://getsupport.apple.com/GetproductgroupList.do
    https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US

  • Capacity planning is not possible for this info structure

    Hi Gurus,
    When I create Rough cut planning profile, I am getting error message ""Capacity planning is not possible for this info structure""
    I am using info structure S994 copied copied from standard info structure.
    Please suggest to oversome this error.
    thanks  and regards
    Murugesan

    Hi,
    Make sure the capacity planning relevant field is maintained for the Infostructure config setttings in MC7F.
    regards
    Ratan
    Edited by: Ratan on Aug 10, 2009 7:49 PM

Maybe you are looking for