Planned order are showing in PWB even outside the View Recommendations for (Days from Today) set at preferences

Hi
We have set PWB preferences View Recommendations for (Days from Today) as 10days,
But in supply/demand the datas are showing outside this time limit.For example if I saw today (04-Nov-days),only 10days from today suggested order dates order should show.But it is showing even orders in dec also.Any setup we mssed?
Please guide us
Regards
VKPK

Similar Messages

Planned Orders Are Being Created In The Future Period (About Six Months onw

Dear All,
We are facing a problem that when we execute the product heuristics for a particular location - item, planned orders are not getting generated as per the demand element in the current period but they are getting generated in future period say six months from now... We could NOT understand that Why the system is pushing the orders in future period. We have checked the following parameters :
Calendar is active for the period upto DEC"2012.
Time Streams have been genereted for the particular resource.
Resource(s) do exist in Live Cache.
Sufficient capapcity is available in the current period (as viewed from the resource planning table).
Please advise that what other parameters should be checked in order to get the planned orders in current period. In this regard, we shall like to confirm that we are facing this issue since last 8 - 10 days, earlier, there was NOT such an issue.
With Best Regards,
Sanjeev Chugh
06-JAN-2012

Hi Sanjeev,
Did you maintain any value for planning time fence, and if yes, how big is it? This could be one possible reason why system is not able to plan the orders (also depends on what Heuristics you are using).
In RRP3, double click on your planned orders and check out the start date and the end date. Is your start date also lying in the future, or is it that due to long time in your operations (somehow your PDS/PPMs got messed up?), orders availability got pushed to the future.
I am not an expert in PPDS, but I can only think of different lead times coming into picture which could possibly push your planned orders availability to the future.
See if this helps.
Thanks - Pawan

Planned orders are not taking into account the processing time

Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!

Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano

Material shortage for Planned Order (Discrete Job) in PWB

Client has planned orders on planner workbench (PWB) ready to release as Discrete Jobs but, because they have frequent revisions, they waits till all components (required to build job) are onhand before releasing from PWB.
They would like an easy way to either check or be notified when the last component required for job is received into inventory so they can release from PWB. They cannot use the standard "Discrete Job Shortage Report" as the job is not created yet. And they don't want to release from PWB till ALL material is onhand
Could we create a custom report perhaps (using same logic as "WIP Mass Load" to determine all component required versus onhand), but does anyone have a better solution how we can solve this?
Regards,
Hugh
Edited by: user13050057 on 13-May-2010 02:09
Edited by: Hugh Parker on 13-May-2010 08:13

1) Why would you check for components of subassemblies? e.g. Say your BOM looks like this.
FG1 is made up of SA1 and SA2 and COMP1.
SA1 is made up of COMP2 and COMP3.
Say you are releasing planned order for FG1. As long as the planned order is pegged to onhand for SA1, SA2 and COMP1, you are good. Right?
2) If you have to add custom logic, I would do it using a when-validate-record personalization on the PWB. The personalization will call a function that accepts order number ; does all pegging checks and returns true or false. If it returns false, then the personalization returns error and does not allow release of the planned order. The function will have to be an interative program that traverses the pegging loop to ensure that all lowest level demands are pegged to onhand.
Hope this helps
Sandeep Gandhi

Not all my songs are showing in itunes even though they are in the Itunes Media file directory

Not all my songs are showing in itunes even though they are in the itunes Media Dir. I have spent hours trying to find out why so I moved the songs out of the Music/itunes/itunes media and uninstalled itunes. I then restarted my pc and re-installed itunes. When I opened itunes the same songs are still there (but cannot be played as cannot find location) even though I have not put anything back in the itunes media dir. To me there seems to be a refreshing problem as itunes is not looking at the directory even through the advanced preferences area is mapped to the correct area.
Help please.
Thanks

Apple's official advice on duplicates is here: Find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership, or that sometimes the same file can be represented by multiple entries in the library and that deleting one and recycling the file will break the other.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
See also Make a split library portable for some thoughts on best practice when it comes to organizing the library and media files.
tt2

Extra plan order are created

Hi PP expert
I am facing following prob.
*Mrp type- M3*
*stategy-30(LSF)*
*lot sze procedure - Fixed (1500)*
When cust. Req. come and we run Mrp sytem create extra plan order (3 nos.) after plannig time fence.
So plz tell me why ?
Nitu....

Dear,
The Purpose of Planning strategy 30 is, to Produce for major customers based on the sale order lot size.
However u can plan addtional requirements using the demand management by creating PIR. System will create planned order as in net requirement planning.
Since Becuse requirement type for indep requirements (LSF) defined for Strategy 30 at SPRO.
If u donot want to system allow to create PIR & Planned order create new strategy by copying SG 30 & remove thy requirement type of ind requirement (LSF). and try.
The strategy 30 is production by lot. This falls under MTS scenario only.
But the production plan is created depending on the lot size. Whether it is PIR or CIR they are group till it becomes the required lot size and then only the planned orders are created.
Hope clear to you.
Regards,
R.Brahmankar

I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?

I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?

Once again, my thanks for your assistance. If I may impose on your generosity one more time, if I understand you correctly if I create a document on Word or WordPerfect, print it and scan it to create a pdf, the search function will not work. But, if I create the pdf document in Word the search function will work. Unfortunately, I am not sure how I create a pdf document in Word other than by printing it and scanning it. Could you please explain.
William B. Kohn, Esq.
General Counsel
Paul V. Profeta & Associates, Inc.
769 Northfield Avenue
Suite 250
West Orange, New Jersey 07052
(973) 325 - 1300
(973) 325 - 0376 (Facsimile)
[email protected]<mailto:[email protected]>

Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"

Everyting was perfect earlier. Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"
Everything is fine.
-They are the right format
-Quicktime is updated
-I have tried simply dragging them into the 'movie' library
-I have tried going to file<add file to library
Nothing works, has anyone else had this problem and found a way around it?
Any and all help appreciated.

In addition to Mike's suggestions, you only have 4GB of RAM and Mavericks does use more RAM than other versions. You may also want to look at the apps that startup on login and the possiblity of upgrading RAM.

In my new iphone5 two static lines are showing up continuously what is the problem

in my new iphone5 two static lines are showing up continuously what is the problem

The last user troubleshooting step is a restore. Check this support document http://support.apple.com/kb/HT1414 about restore. Just be advised that a restore will delete content from the phone. If you restore from a backup, then it will put content back on, however if it is necessary for you to restore as a new device, everything will be deleted. Make sure content is synced and backed up.
If that doesn't do it, then make an appointement at the Genius Bar of the Apple store to have the hardware checked. If under warranty and found to be defective, they will replace the device. If no Apple Store close,then contact Apple Care.

HT5463 Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is

Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is tickedP

Chris thanks for your reply, if none of the Do Not Disturb settings are switched on - then am I right that this setting will have no effect. I.e. I want my phone to ring at all times, so have turned off all of the do not disturb settings

My iPhone 5 does not show caller name even though the number is saved with a name in contacts

My iPhone 5 does not show caller name even though the number is saved with a name in contacts

Contact your carrier. Caller ID is a carrier feature.

Envelopes are printed in magenta even though the color icon is set at 100% black. what is wrong?

envelopes are printed in majenta even through the color icon is set on 100% black. What is wrong ?

Have you tested the printer from another appliaction?
It is possible your black ink has run out.
Peter

Error messages shown outside the view/table.

Hi People,
      I have created a view & added an event 'Before saving the data' to it. So when we enter data into the view & try to save it, it will trigger the event & that will call a function module, which will check if the user entries are correct, If the entries are incorrect then i am showing an error message. The problem is, this error message is shown outside the view maintenence screen but inside the sm30 transaction! then I have to navigate back to my view maintenence screen. Kindly guide me on how to avoid this & make the error message appear in the same view maintenence screen.
Thanks & Regards,
Deepak

Hi,
      I have now used the event '05' For new entries. I am able to validate the entries, & show the error messages for invalid entry. Now when I enter valid input, still the vent is triggered & it shows me the error message. I am using the following code
FORM CHECK_BEFORE_SAVE.
    DATA: wa_total(1000) TYPE c.
    DATA: BEGIN OF ls_total,
            mandt type mandt,
            FUNCTIONAL_ID type /PRA/RESP_FUNC_AREAS,
            HIER_ID type /PRA/HIER_ID,
            DESCRIPTION type /PRA/HIER_DESC,
            CHANGE_FLAG type boolean,
           END OF ls_total.
LOOP AT TOTAL INTO wa_total.
    ls_total = wa_total.
    IF ls_total-functional_id IS INITIAL.
        MESSAGE E208(00) WITH 'Functional Area cannot be empty'.
    ENDIF.
ENDLOOP.
ENDFORM.
I see that when i enter the valid entry & this event is triggered, The global table for view TOTAL is not refreshed with new values & hence I still get the error. How do i refresh this TOTAL table?
Regards,
Deepak

My 4s continues to lose wi-fi and reverts to 3G even when the phone is 4 ft from the router.

My 4s continues to lose wi-fi and reverts to 3G even when the phone is 4 ft from the router. Is this a defect in my phone? It happens when I am home and I switch to my wi-fi. It doesn't matter where the phone is in relation to the router. Please note, I have my phone set to NOT sleep. Does any one know why my phone reverts to 3G? I have to manually set it to wi-fi every time this happens.

I have the same issue with my iPhone 4s. It was not an issue when I was using iOS5, but it started once I upgraded to iOS6 and the recent update of iOS6.0.1 did not fix it. Judging from the release notes, Apple thinks this is only an iPhone 5 issue, as they say they fixed it for iPhone 5's.
I have an iPad 2 (iOS6.0.1) and a 3rd generation iPod touch (latest iOS5 release), as well as an Apple TV 2. None of the other devices have this problem and they are all on the same network.
Something interesting... my iPhone 4s works fine on the wifi where I work. At home, it continually turns on and off. My home network is using a Netgear router (WNDR3400) and the iPhone is connecting to it using WPA2+PSK protocol. Hopefully, this information can help Apple figure out the problem.
(I remember my iPod Touch having a similar issue a few years ago with iOS 4, when I had a different Netgear router using the same security protocol. I think iOS 5 fixed it for the iPod Touch... I wonder if some Apple products have an issue with Netgear Routers using that encryption.)

V 3.6.13 - what has become of 'Restore previous session'? I've lost track of many topics in tags I had open when I had to shut down in advance of a power down by the electricity co. for day-long maintenence work in my area.

# Question
v 3.6.13 - what has become of 'Restore previous session'? I've lost track of many topics in tags I had open when I had to shut down in advance of a power down by the electricity co. for day-long maintenence work in my area. Being able to quickly close all tags, knowing one can recover them later is invaluable.

See:
* http://kb.mozillazine.org/Session_Restore

Planned order are showing in PWB even outside the View Recommendations for (Days from Today) set at preferences

Similar Messages

Maybe you are looking for