Planned order BOM change - PO already created. How to keep the 2 in sync?

Hi Everyone,
I have a question regarding planned order BOM changes AFTER a vendor PO was already created and sent.
How can we restrict the re-explosion of a planned order (from re-ATP of item in VA02) if the PO has already been created?
This causes problems for us when we backflush the PO components as there is a mismatch between the updated planned order BOM and the PO component list...
Any thoughts/ideas?
Thanks!
Tony

You can freely arrange the order of the photos in the contact sheet by dragging and rearranging the thumbnails of the photos on the sheet, if you set the sorting to "Manually" in the "View" menu, while viewing the Contact sheet:
Regards
Léonie

Similar Messages

  • Production Order BOM change

    Dear Expers,
    How can i restrict the Production order BOM Change. Please tell me with the steps.
    Other than screen variant.
    Regards
    Raghu

    Hi,
    To do this you can use below mentioned processed.
    1. create a user status and give approval to the order at creation and the user will not be able to change any thing in the process order.
    2. You can use user exits to restrict changes changes at "materials" screen.
    Hope this will help.
    regards,
    kaushik

  • Read Order BOM Changes

    Hi All,
    How to read/track the order bom changes (CU51)?
    I want to track all changes made using CU51 for perticular sales order, like component deletion, change in quantity etc. I checked the tables CDHDR and CDPOS but did not get any information.
    Please help

    Sachin,
    How did you solve this issue ? I have same req in my prj.....any help in this would help us...
    Please let us know how did you solve this ? Is it by CDHDR or User exit tracking changes and passing it to Ztable ? any other method ?
    pls let us know ...thanks in advance....
    Gayathri

  • Order BOM change type - CC03

    Hi,
    I'm building a custom report for Order BOM changes like CC03.
    Now, I'm stuck with defining the change type. I did debug into CC03 but the logic to build change type is manual and quite complex.
    Please let me know how to define the change type.
    Thanks,
    Khanh

    Hi Rav,
    That's not what I need.
    Please run the Tcode CC03 for a specific change number, then you will see many items inside that change number.
    Each item may have a different change type for e.g. NEW, DEL, OLD, Ind, ...
    I want to know that kind of change type.
    Thanks,
    Khanh

  • How to keep the WBS & Order in account assignment tab of SD contract item?

    Hi Experts,
    If I remove the plant from the shipping tab in the contract item (the contract type is WV), I will be able to enter the WBS or Order in accounting assignment tab. However, if I enter the plant (in order to determine the tax in pricing), the WBS and Order are disappered and there is one new settlement rule button showed up.
    Do you know any configuration could keep the WBS and order in the accounting assigment tab even the plant is there.
    Thanks in advance!
    Norman

    Hi Chandra,
    Thanks for your answer. However, I even added the plant in the WBS, the tax (we use tax jurisdiction) still could not be determined.
    The problem is that SAP changes the account assignment tab screen (it suppresses the WBS and Order fields, but addes settlement rule) with the plant in the shipping tab. Do you know how to keep the same account assignment tab screen with the plant in the shipping tab?
    Thanks,
    Norman

  • How to keep the waveform chart updated when changing states in state machine/

    Hello Everyone,
                           Can anyone please sugest me how to keep the waveform chart updated even if I am changing the states in a state machine??
    I am having analog inputs on the waveform chart...
    Thanks in advance...
    Now on LabVIEW 10.0 on Win7

    hello guys,
                    thanks a lot for the suggestions, here is the attached code... please follow the following steps to run it..
    ONce you hit play,press either Start Main/Cyl UP button on the front panel,
    once you start observing the waveforms, you can press the Cyl_Dwn button on the front panel... You can observe that the state changes to Start Counter state,
    and the waveform chart also stops updating... I would like both the waveform charts to conitnuously show the data even if the state is changed....
    Now on LabVIEW 10.0 on Win7
    Attachments:
    Soda Vending MAchine.vi ‏212 KB

  • I bought and use iPad in Hong Kong, but I cannot update apps because the apple store asked me to change to Hong Kong, how to make the change (correction)?

    I bought and use iPad in Hong Kong, but I cannot update apps because the apple store asked me to change to Hong Kong, how to make the change (correction)?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3. Tap on your Apple ID
    4.Tap "View Apple ID"
    5. Enter your user name and password.
    6. Tap "Country/Region."
    7. Tap "Change Country/Region"
    8. Select the country/region where you are located; re-select country/region even if it is correct
    9. Tap "Done".
    Note: If the change doesn't take effect, sign out of account and sign in again.

  • Does Anybody know how to keep the license files and Certificates in ISE-3315 During the upgrade.

    Hi,
    I have two ISE-3315 Appliances in production network.
    I need someone's help to explain, how to make the Secondary node as the primary admin note to reset-config.
    And then I would like to know how to keep the license files and Certificate during the Upgrade.
    Please help me to answer my questions.
    Thanks
    CSCO11872447

    The Cisco Identity Services Engine (ISE) provides distributed  deployment of runtime services with centralized configuration and  management. Multiple nodes can be deployed together in a distributed  fashion to support failover.
    If you register a  secondary Monitoring ISE node, it is recommended that you first back up  the primary Monitoring ISE node and then restore the data to the new  secondary Monitoring ISE node. This ensures that the history of the  primary Monitoring ISE node is in sync with the new secondary node as  new changes are replicated.
    Please  Check the below configuration guide for Secondary ISE- Nodes.
    http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.pdf

  • How to keep the MB powered on with Lid closed

    How to keep the MB powered on with Lid closed and no monitor connected?

    You can't. And you shouldn't due to heating issues.
    There are however 'hacks' that allow you to bypass
    this.
    http://www.alxsoft.com/mac/sleepless.html
    http://semaja2.net/insomniaxinfo/
    Blackbook C2D   Mac OS X
    (10.4.10)   120Gig, 1Gig, Superdrive.
    This may be true of overheating, but ONLY in the iBooks and very old laptops, if you think about it what is the difference between native clamshell mode (Using the monitor/keyboard etc) and the hacked clamshell mode? does plugging a screen in to the laptop some how create more ventilation :S
    This rumor is really really wrong, and as stated only affected the old machines which were not capable of native clamshell mode, but of course we keep the warnings there because we dont want to be sued if some idiot places it in there laptop bag while rendering a movie.
    PS. If anyone can give me evidence to prove otherwise i will add it to the investigation that im slowly compiling to "bust" this annoying myth

  • How to keep the Sonogram settings and make them "Sticky"?

    I am a Forensic Audio Examiner and would love to use Soundtrack Pro. Does anyone know how to keep the Sonogram settings and make them "Sticky" so you don't have to reset it every time you open up the project?
    Also the Sonogram loses it's frequency range settings while changing the zoom.
    Where is the feedback link for this application?
    Thanks

    are you talking about the spectrum analysis?

  • How to keep the data entered on a page apex

    how to keep the data entered on a page apex
    so, I've got a registration page then wish go to another page P2 and I return to this P1 without losing data

    Hi,
    As long as the registration page is within the same session, the values will remain in the session until they are specifically cleared out. This can be done by a process on a page - so check if you have a "reset page" process on P1 and, if you do, delete it. This can also be done on a branch - so check the branch that takes you to P2 and see if there is anything entered in the Clear Cache setting and, if it shows *1*, remove that. There are other ways as well, but these are most typical.
    Andy

  • How to keep the filtered output in a page after user navigates back?

    How to keep the filtered output in a page after user navigates back to all records from another page.
    Currently it clears the search

    Hi,
    user13091824 wrote:
    How to keep the filtered output in a page after user navigates back to all records from another page.
    Currently it clears the search---While returing from page AM Return status should be True in pageContext.setForwardURL.:::
    pageContext.setForwardURL("OA.jsp?page=/XXX/oracle/apps/po/msg/webui/SearchPG",
    "SUPP_SEARCH",
    OAWebBeanConstants.GUESS_MENU_CONTEXT,
    null,
    null,
    true, // Retain AM
    OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
    OAWebBeanConstants.IGNORE_MESSAGES);
    ---After setting AM Status to true u can able to c the values.
    Regards
    Meher Irk

  • HT202213 how to keep the songs on your iphone

    i have itunes home sharing i would like to know how to keep the songs on your iphone after you turn home sharing off or get out of range.

    You sync them via iTunes.
    You canot copy them to the iPhone using Home Sharing.

  • The popup window won't open at a normal size. Any ideas on how to keep the popup window a normal size when opening?

    I recently did the latest update for my MacBook Air and when I use a specific website it won't open the popup blocker at a normal size. Any ideas on how to keep the popup blocker at the size that I select?

    This is a user to user forum and Adobe Staff does drop by.
    First thing to try is Reset the Type Tool by right-clicking on its' icon in the Options bar.
    If you still have problems, it could be related to fonts. Here is a step by step troubleshooting help doc for that.
    Troubleshoot fonts | Photoshop CC 2014, CC, CS6, CS5
    And basic troubleshooting: Photoshop: Basic Troubleshooting steps to fix most issues
    Gene

  • How to keep the field open for input with error message in report program

    Hi,
      Need a help in solving the below issue.
    "How to keep the field open for input with error message in report program"
    Regards,
    C.Shasiraj.

    Hi...
    you have to use the event:
    <b>AT SELECTION-SCREEN ON <FIELD> EVENT.</b>
    u have to give an error message in this event.
    Consider the following <b>Example:</b>
    <b>PARAMETERS : NUMBER TYPE I.
    AT SELECTION-SCREEN ON NUMBER.
      IF NUMBER = 10.
        MESSAGE 'Number vakue is 10' TYPE 'E'.
      ENDIF.
    START-OF-SELECTION.
      WRITE NUMBER.
    </b>
    in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
    Execute this program once u will understand....
    also Consider the following links :
    <b>Regarding events:</b>
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
    <b>Regarding messages:</b>
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
    This is very useful.......
    Reward points if useful....
    Suresh....

Maybe you are looking for