PLANNED ORDER & PRODUCTION ORDER DATES.
Dear All,
How to come Dates in Planned order and then Production order.
in Discrete Mfg. through MRP Run.
I want details
How to calculates production dates
MANOJ
Hi,
MRP does not calculate dates for production orders. For planned orders, refer to SAP help link below:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/f4/7d290944af11d182b40000e829fbfe/content.htm
Regards,
Vivek
Similar Messages
-
How to trace planned order data after it has been converted into production
Hi, There,
The planned order has been converted into production order.
However, I need to trace if this planned order is generated by MRP
run or created manually. I can't get any planned order info from
table PLAF. Any input?
Regards,
NancyHi,
Once fully converted, the Planned Order data will not be available in the Table : PLAF.
If it is available, then You can have the details with the Time Stamp and User data from PLAF.
But, the refrence will be available in the Production Order.
You want to make a Track of the Planned Order details and the Quanity, then you need to have/create Z tables so that the data will be availabe.
This is how most of the Organizations keep a track of the Planned order data.
Hope this helps..
Regards,
Siva -
Hi Guru's,
please explain how the planned order dates are calculated.
in MTS scenario if a delivery exists and another planned order is raised the system is not calculating dates as per dates given in the Material master.it is cheduling the order depending on the previous delivery date.
Please explain me How it is calculating the dates in planned order
Thanks
SatyaHi,
The scheduling is based on your MRP parameters. If you select the basic dates scheduling while running MRP, the system will consider the material master in house production time. It will not consider the routing standard values.
If you select the lead time scheduling, the system will explode the routing and it will calculate the operation time based on the standard values which we have maintained in the routing.
Always there will be some difference between these two type of scheduling. Lead time scheduling will be more accurate than the basic date scheduling.
Regards,
V. Suresh -
Confirmed date in sales order influenced by planned order dates
Hi,
My requirement is that the after the MRP is carried out and planned order is generated, the changes in the dates of the planned order, when carried out, shall accordingly influence the confirmed date of the sales order line item when the availability check is carried out in the sales order.
Say, the sales order has confirmed a line item for 25.05.2009. Once the MRP is carried out and planned order is generated and owing to unavailablility of a component, the planned order date (finish date) is manually re-scheduled to say 28.05.2009. My requirement is that the sales order confirmed date shall accordingly be re-scheduled when the availability check is carried out.
Additional Info : Strategy Group - 20,
Make-to Order scenario is employed,
Standard Item category TAN,
Requirement Class - 040.
Is this possible in standard SAP? If not, please suggest any custom developments that may be required. Looking forward for helpful replies.
Do revert back if more info required.
Regards,
Anil KumarHi Anil,
As Suggested in Above reply to your question.
If Materail component was not available and due to that you had to reshedule the planned order date manually, that definately will affect the material availability date, but i think if material availability will be run once again in Sales Order it will determine the new material availability date, and i dont think there is any need to carry out any enhancement.
Guru's Please correct me if I am wrong.
regards,
Paresh -
Issue about planned order date of ROH.
Hi Experts,
In MD04 , system is displaying planned order date of ROH after the planned order date of FERT i.e., for FERT---- planned order date is 21/01/2009 But for ROH -
planned order date is 23/01/2009.
can anyone tell me y its happening here.
regards,
sap pp
Edited by: sap pp on Jan 22, 2009 11:42 AMDear,
Go to the BOM of FERT and check the in component details and check Lead-time offset. Make it blank
In OPU3 and OPU5 Adjust dates in lead time scheduling should = 1 Adjust basic dates to order start date.
Then run the MRP in MD02 with planning mode 3 deleted and recreated and check your result.
Regards,
R.Brahmankar -
Process Orders and Planned Orders data
Hi,
I am working on extracting process order and Planned Orders data into BW. I could not find any standard DataSources available for my req, so I want to develop generic extractor. the main key figures are Actual Labor and Machine Hours, Target Labor and Machine hours.
Please help me if there are any standard datasource available or ECC tables to pull the data or any standard function modules available.
Thanks,
ReddyHi Sanath,
Thanks for your reply. I want to pull Actual Machine hours, Target Machine hours, Actual Labor hours and Target Labor hours.
these fields are not there in PLAF table.
I am looking for a table or datasource which can give those details.
Thanks,
Reddy -
Hi Experts,
May I ask for your help. I have a gr processing time of 1 and In-house production of 1 day as well. But whenever I run heuristic, it results in 4 days from start date to availability date. Say April 16 start date and availability date is April 20. Are there other factors on how this is computed?really hoping for a reply from you.
Thanks! Sincerely, RiaHello Ria,
Have you maintained any GR time in ECC?
I faced a similar issue (in PPDS order though) in which it was computing the availability date
first based on the GR processing time maintained in APO, when the order goes to ECC it would pick up the GR processing time maintained in ECC, and move the availability date of the order in APO.
We are working on code to stop this transfer back to APO.
Note 508993 gives more details about the FM.
You may try an option to stop the transfer from SAP R/3 since you are working with SNP planned orders:
https://help.sap.com/saphelp_scm50/helpdata/en/80/e8bc0f629af14db213108bb6fa7515/content.htm?frameset=/en/b3/32c5d32970834dadf53cac0aa2b5b4/frameset.htm¤t_toc=/en/9b/954d3baf755b67e10000000a114084/plain.htm&node_id=147
Hope this helps you!
Regards,
Subhash -
Wrong Planned Order dates - MRP Run
Dear Experts,
Please guide to resolve the following problem:
I have uploaded the PIRs for 3 months. When I take the MRP run, the system is scheduling the planned orders for first 2 months only. For the 3rd month's PIR the planned order are created for the PIR dates only.
For example, if the PIR (for 3rd month) is maintained on 25th of the month. The planned orders for FG & SFGs are being created for 25th only. While for 2 months the Planned orders are properly scheduled.
What could be the reason for such behavior.
The planning horizon is 90 days.
Regards,
Rohit.Dear Rohit,
If you are running MRP with NETPL, then the Lead time scheduling will be carried out only for the planning harizon.
Try executing MRP you can select NETCH key.
or
If you want to run MRP with NETPL key, then please give In-house production time in workscheduling view as per the routing values. For example 1 day is the processing time and give the quantity for for 24 hr production. Then the sceduling will be carried out as per this values.
And change the planning harizon for detailed scheduling in OPU5 transaction.
Thanks and regards
Murugesan -
Weekly Lot-sizing yielding incorrect Planned Order dates
Hi All,
need a help..
Lot-sizing key = W2 (weekly)
"Scheduling" on the config of the lot-sizing key = 3 (Period start := start and period end := delivery date). This data has been maintained for a material that is to be planned/produced on a weekly basis.
Requirement --- Weekly planning on my material. MRP should return Planned Orders with Start Date = Reqt Date (of the Dependent reqt) & End date = Availability date (of the dep reqt).
Currently, the system is calculating the "only" hours on the basis of the Routing data (I'm running Lead Time Scheduling) while creating Planned Orders during the MRP run against my expectation of spanning the production/order out over multiple days (per the lot-sizing config)
Any clue would be of a great help
cheersThanks Mario,
Had found that out during the course of my testing. I'm doing a Lead Time Sched, so obviously my reqt can't be met..
So, we can conclude that though a weekly lot-sizing procedure is/could be compatible with LTS, the Config within the lot-size (field Scheduling = 3) cannot be used to influence the dates on the created Planned Orders...
Cheers -
Planned order date on requirement date
Hi ,
My indepenedt req is maintained for monday .By backward scheduling it gets planned on friday(i.e production endson friday)
How i can schedule the production to take place in current week . That is for PIR entered on monday , the production should be planned in the current week.
Are there any settings in lot size ?
Regards
ShankarRHi,
PIR date is the requirement date.
When you run MRP with this date, the system checks for Avaialble Stock and receipts and does the Net requirement calcualtion.procurement selection, BOM explosion and scheduling.
When it comes to scheduling, it looks for the requirement date and schedules it based on the scheduling parameters maintained for the Planned orders.OPU3
You can set the scheduling type as it forward or Current date scheduling .
If you set the Current date scheduling, the system will consider the start date as today and does the scheduling, if after the scheduling the availability date is past the requirement date anexception message is raised.
Hope this clarifies , please revert if you need any details.
regards
Ratan -
Regarding Re-sechduling of planned order date
Dear SAP Guru
For a finished material The stock is being zero, although it has fixed ;lot sizes of 500, and safety stock of 2000.I have run MRP today.The stock of finished material is being 0. It has in In-house production time as "1" day.After runnung MRP the system is displaying the planned start date as 16/08/2011, in the past. Could any among us why this abnormal behaviour.
Thx
Bhupendra SinghHi,
check the settings in OPU5
And also you can check the settings in MRP paramters OPPQ.
And also check in MRP Group Paramters OPPR.
Thanks,
JK -
Planning BW Production Server Data Patchup
Hi Folks,
My BW Production Server was down for few weeks and we could able to fix the problem, Now we want to load the data that was not loaded since the production server was down (about 2 weeks of data should be loaded on the production server).
Please advice a proper plan to upload the 2 weeks data.
Thank you,
JayHi Jay,
it's not the right forum for this question. Data warehousing would be right.
Anyway, your question can not be answered fully. There are many possible dependencies. Check note <a href="http://service.sap.com/~iron/fm/011000358700000431401997/0731682">731682</a> and related notes.
Regards
Marc
SAP NetWeaver RIG -
What is the effect of the planned order after it is converted to production
Hello Gurus,
1.There was a planned order with wrong date 2041 instead of 2011
2. plannedorder is already converted to production order and is visble in assignment tab of the production order
3.when I am tryng to display the planned order it gives error planned order is not exists.
4. Production order is already delivered
Now will there be any effect on finanace or any other ,if the planned order was created with wrong date,
can we now change the date of planned order , but it says does not exist as it is already converted to prod order.
Please let me know the implications of wrong date and how we can correct the date from 2041 to 2011
Thanks in Advance
HimakarDear Himakar,
As explained by our forum member,once after the planned order is converted into production order,the entire planned order
details gets deleted from table PLAF and the planned order dates can be changed in the production order and there is no
business impact other than the planned/production/actual dates.
However the planned order no deatils can be checked in the production order.
Regards
Mangalraj.S -
For a target based production creation of Number of planned orders reg
For a target based production, can anybody explain as to how the planned orders created/altered. The main question is the system generated planned orders can be altered, suppose the system generates 10 planned orders can we alter to 8 planned orders if so how?
Vachanala,
The way I understood "Target Based" production is that it is an MTS scenario and the Material is assigned with Planning strategy 11 in MRP3 view.
For this you need to PIR(Target) using transaction MD61 with requuirement type "BSF". Once this is done, you can run MRP using MD02 if for single material or run in background using MDBT transaction. Planned orders are created based on the target(PIR).
You can manually change the planned order dates or quantity in the change mode of the planned order, and system firms this planned order.
Hope this information helps...
Regards,
Prasobh -
Dear All,
The sales order was input by the CSR on today the delivery date entered in the order was next day. Therefore, the planned order should have been todayu2019s date. This would give us enough time to manufacture the product and deliver to the customer as requested. But the planned get created for next day.
Planning strategy for material is 40 and MRP type is PD and Lot size EX and all scheduling parameters are 0 day.
Can you please update me the factors from sales order which affect planned order dates.
Regards,
p983331Hi
Basic dates depends on GR processing time, in house production time and opening period
In the material master two types of in house production times are available:
Lot-size Independent - (Integer values only) MRP 2 orWork Scheduling view
Lot-size Dependent - (real numbers - decimal) Work Scheduling view
also check SD processing time (pick/pack, Load, Transit)
regards
Dev -
Scheduling of planned order and Production order
Dear PP gurus,
I have run MRP , after running MRP, system has created planned order. These planned order dates are schedule by the system in 2015....I am not able to understand. how? . When i double click on
planned order order and try to convert it in production order those dates get copied into production order.
DO i need to change the dates thr? or keep the same dates which the system is giving>
I m going wrong somewhere. please tell me where and what is config for scheduling for planned order and production order?
Please tell me step by step procedure
Regards
Edited by: Aadi1981 on Apr 1, 2010 9:02 AMThanks for replying,
I have done the below setting for shceduling. Kindly check and let me know any setting needs ot be changed or incorect
FOr scheduling production order , i have configured below settings in OPU3
In OPU3 ,
Detail scheduling tab
Scheduling and Generate cap req tab is checked.
then
adjust scheduling , adjust dates tab, : adjust basic dates , adjust dep , reqt to operation date is selected
scheduling type is backward.,
Automatic scheduling tab is checked.
In OPU5
Scheduling of PLanned order
Scheduling and Generate cap req box is checked (selected)
Adjust scheduling
Sheduling level: via detail scheduling
adjust dates: adjust basc dates , adjust dep reqt , req to operation dates
For capacity scheduling ; always basic dates, dep reqts to operation dates
scheduling type ; backwards
apart from this do i need to do update ca96/ ca97?
best Regards
Edited by: Aadi1981 on Apr 3, 2010 7:42 AM
Maybe you are looking for
-
I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. But in my purchased item libr
-
SQL Query without using Pivot...
Hi Guys, Need help with a query... I think pivot table is the way to go but don't wanna to use it as it is not supported in Oracle 10g. Sample data set... Part Section A001 AC A001 AY A001 AN A001 AX A015 AC A015 AR A007 AC A008 AN A008 AX A008 AE A0
-
What (tech.) specifics do I want when I buy my i-Mac?
I don't know much about computers... I want to buy an affordable computer. I heard the i-Mac is good. Is it? What I want the computer for (and thus, what the specifics should be attuned for) is video editing on programs like Final Cut Pro, Flash, Aft
-
Dear All, Conversion of FG into Scrap. one step process (mvt. type 309) Accounting entry scrap inventory a/c dr gain /loss on scrapping a/c dr. To, FG inventory a/c cr. two step process scrapping through 551 movt type - gain/loss on scrapping a/c
-
Who's been messing with my album artwork?
I have recently bought Cubis 2 for my 80gb video iPod. Before, I also bought zuma and minigolf. No problems with the latter. However, when I loaded cubis on my pod, a bunch of my album artwork went missing. I am very frustrated with this. An explanat