Planned Order Qty updation in S225 Table

Hi Friends,
In S225 Table there is a filed of Planned Order PGMNG. Can anyone tell when this field gets updated?

Dear Nilesh,
Update the statistics using MF27,after taking MRP run.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

  • Adding Total plan order qty to 2lis_04_p_matnr

    Dear BW Gurus,.
                            I am appending a standard field (GAMNG - Total plan order qty) to the extract structure MC04P_0MAT.When i activated the structure,got it done but with warning that the Field GAMNG is not within the customer namespace...Now when i check the DS,the appended field is present with "HIDE" AND "FIELD ONLY" Options checked.When i try to uncheck them fields and check "select" field and save,it throws an error" THE OLTP SOURCE STILL CONTAIN ERRORS"..Would appreciate any help on this..
    manythanks
    arun

    Hi,
    Check by deleting the setup table for the DS 2LIS_04_P_MATNR.
    If there is delta already running, then you need to do initialization once again for field GAMNG.
    Vis

  • User should not allow to exceed planned order qty

    Hello Experts
    In present case user can change the planned order qty when he converts it to a process order or purchase requisition.
    Is there any way to restrict the user, where user can not exceed the planned order quantity?
    Request to reply with a solution.
    Regards
    Pradipta Sahoo

    Hi Sahoo,
    I have two suggestion regarding the restriction of Changing the quantity while converting the Planned order into Process Order OR Pur Reqt. :
    1. First one is through the authorisation for the user, the suggestion given by our friends.
    2. You can use a User exit in the Planned Order Conversion transaction (CO40 / CO41/ MD04 etc). Where you can code to refer a Z- Table created with the User whom to be allowed.
    You can create a Z table and mention the user id for whom system should allow the change of Quantity during converion of planned order. So wheh the user is trying to convert the planned order system will fire the User exit and check if the user is available in the Z-table then it will allow him/her to modify the qty otherwise it will through an Error as required.
    Request you to take the help of the Abaper to invoke the userexit .
    I can suggest the third option too, but not sure whther it will work, you can try out.
    3. If you feel no user should be allowed to modify the quantity then I suggest you to create a Error message in the conversion tcode if the qty is being modified. You can try using a field exist.
    Regards
    radhak mk

  • Production order and planned order qty should not consider in MRP

    Dear All,
    i do not want to consider the previous month production order qty and plenned order qty (Nothing but WIP qty) in the current momth MRP, but the stock has to consider in MRP.
    Example,
    Before MRP,
    material : XYZ
    Stock : 1000
    Prod Qty : 500 for 02.04.2008
    PIR Qty : 2000 for 02.05.2008
    After MRP, the requirement should be as below said,
    material : XYZ
    Stock : 1000
    Prod Qty : 500 for 02.04.2008
    PIR Qty : 2000 for 02.05.2008
    Pld OrdQty : 1000 for 02.05.2008
    For the above requirement ,i have done settings in the availabilty check like , for include planned order and include production order are "DO NOT TAKE IN ACCOUNT".
    Even then also the planned order qty is generating for the "500" only.
    please give the solution for the above said requirement.
    thanx in advance
    Regards
    Srinivas

    hi
    MRP will always consider the prod order qty while doing nert req calculation.One thing u can do is TECo the prod orders and un MRP then it wont consider prod order qty.
    The Availability check will check whether the components r avalaible or not based on ur scope of check
    Reward points if useful
    Amit

  • Bapi for sfg dependent dem,snp planned order qty, and ppds planned orde qty

    Hi Gurus,
    I am not much familiar with APO, so please help me,
    Input details:
    Field                         Value     
    Planning Version     000     
    Source Location *     1001     Single/Multi Value
    Product *                          1000061     Single/Multi Value
    Production Planner *     PRC     Single/Multi Value
    Start Date *          
    End Date *          
    o/p:
    Source Location     Date     Semi-Finished Material     Material Description     SFG Dependent Demand     SNP Planned Orders qty     PPDS Planned order Qty     Total SFG Variance due to Lot size     Total SFG Variance reference to dependent demand
    1001     15-Jul-10     1000041PP     PRIMARY FF MILK  3% FAT     340     412     420     8     80
    1001     15-Jul-10     1000041PP     PRIMARY FF MILK  3% FAT                         
    1001     15-Jul-10     1000041PP     PRIMARY FF MILK  3% FAT                         
    Is there any bapi to fetch the data as shown in o/p.
    Thanks

    Hi Phani,
    Tryout the below BAPIs
    IF10503 (object)
    BUS10503
    Regards
    R. Senthil Mareeswaran.

  • Planned order qty. shodnt  change after copying quotation and creating SO

    Hi Guys,
    In my scenario i am creating a quotation of qty. 100. Sytem generates planned order of 100 qty.After i copy the quotation and creates a sale order changing qty. to 50, the system is changing the planned order qty. to 50 whereas the requirement is planned order qty. must not change i.e. it must be 100.
    Is there any setting for this.
    Regards
    Laxmikanth

    answered

  • BADI For Changing Planned order Qty during MRP Run

    Hi,
      My requirement is i want to change Planned order qty based on some conditions during MRP run(MD02). Is there any BADI to fullfill my requirement.
    Thanks,
    Kishore

    Not sure I understand the situation correctly...You want to delete the planned orders before MRP runs again. WHy do you want to do that ? Are these firmed Planned orders ?

  • Planned order qty. based on usage probability in quotation

    Hi ,
    I created a quotation with 5 qty. and kept usage probability as 60%. I did the requirement transfer in MRP.In MD04 it generated a planned order of 5 qty. and quotation with 3 qty.
    Is there any setting so that system should generate planned order also with 3 qty. i.e. same qty that of quotation.
    Regds

    Hi,
    After the req. transfer from quotation to MRP, go to MD04 & check the qty which has been transferred, is it 5 or 3 ?
    If it is 3, then check in material master / info-rec if any min order qty / min. lot size is maintained. Also check the lot sizing procedure & safety stock if specified.
    Regards,
    Vivek

  • Production Order created from Planned order  qty should not be changed

    Dear PP Gurus,
    IKindly give your valuable inputs on the below mentioned subject.
    From MD04  planned order is converted to production order user should not be able to reduce the requirement quantity below Production Order quantity.
    Thanks & regards,
    Shanmugam Balamurugan

    Hi,
    This is common problem. to control this you need to develop an user exit . This exit will check the fixed lot size in material master and will compare with the quantity of production order. The exit will get fired at the time of order saving.
    If any miss-match happens system will give an error message
    Regards
    Amit Parkhi

  • Production order Qty update-urgent.

    Hi all,
    I want a query that must not allow me to  update the Qty in the Production order.Once production order created from the MRP,it should not allow me to update any Qty at the production orer level what should be query its urgent.
    mona.
    thanx in advance.

    Hi Mona,
    Query is only for report.  It will not be the tool you are looking for this task.
    The SBO_Transaction_Notification SP can be used instead. There are quite a few threads discuss this topic.  Try search in the forum to find what you need.
    Thanks,
    Gordon

  • Table for PP  Planned order Change Qty

    Hi,
           I am making a report and in that i am also adding PP planned orders of material which are manually generated  for this  if plan   order is manually generated  in the Table PLAF  filed  AUFFX is set to 'X'  but this indicator is also set to 'X'  if system generated palnned orders are chnage  in such case i want to take only change qty  means  if system have generate plan order for 25  and user have makde it 30   then in report as manually generated plan order qty i want to add 5 qty only  ,  so in which table i can get those details.
      regards,
      zafar

    Hi,
    Can u help on this issue.
    regards,
      zafar

  • Plan order table

    Hi PP Gurus,
    I am developing MRP report for a client in which we are calculating the delay in plan opening period means difference between   plan opening date of plan order and actual production order creation date .
    For this we are getting production order creation date from production order but this order is creating from plan order so we are not getting plan opening date from plan order as the entry of plan order gets deleted from PLAF table .
    Is there any other table of plan order for getting the plan order data even after converting it into production order?
    Regards,

    Hi!,
    No you won'tfind  that data once the planned order is converted to production order. You can do one thing. Please develop an enhacement which will fetch the planned order data from PLAF table and will save it to a ZTABLE before the planned order conversion, so that you can use the same later on. You can also update the created production order number in that table.
    I hope this will help in solving your issue.
    Regards,
    Uday

  • Planned order detail Table

    Hi,
    With a Combination of WORK CENTER and PLANT i need to extract all the respective PLANNED ORDERS, which is the corresponding table to query. Please help.
    Points Assured
    Regards,
    Prabu

    Hi....
    PLAF - Planned order table
    Tables related to work center:
    CHRD: Work center header.
    CRCO: Assign ment table
    TC24: Person respoancible for WC
    Others:
    PBIM: Independent Requirements for Materials
    MDTB:MRP Table
    RESB:Material Reservations
    Thanks,
    Naveen Inuganti.

  • Check in Production order qty with ref to Planned order

    Dear all,
    Please suggest me, when i am creating a productin order with ref to planned order , so the order qty should not exceed the planned order qty.
    How can i control this , please give ur valuable inputs on the same.
    regards
    Ravi Arora

    Dear
    If you are not particualr to conver the planned order to production order through CO40 , then you can control with the help of
    Enhancement : PPCO0007 (Exit when saving production order)
    Functional Module : EXIT_SAPLCOZV_001
    Include : ZXCO1U06
    Compare the Order header Qty with the sales order Qty If the production order header qty is more do not allow the system to save the production order..
    Otherwise please check those out for your requirement :
    Planned Ord. to Production Order User Exit (PPCO0005)
    EXIT / BADI for Tcode CO40
    Regards
    JH

  • Datasource for Planned Order information in PLAF table

    I am looking for a extractor to extract Planned order information from R3 'PLAF' table into BW.
    If anybody knows information on this, please let me know.
    Thanks for your help

    Did you ever find a solution to this question??
    Thanks!!

Maybe you are looking for