Planned Orders Deleted
Hi Experts,
How do you delete collective planned orders? I mean by simply indicating the plant or MRP controller. Is there a log or you trace for this? What transaction code is used for this?
Hi,
MD16 - Collective display planned orders
Just highlight the planned orders which you want to delete the planned orders then press "delete" button
once planned order deleted, can't trace the history, no log file
Regards,
Sankaran
Similar Messages
-
SNP planned order deleted in APO, but not in R/3.
OK Guru's,
We have a situation where during the weekend SNP planning runs, SNP Planned orders are deleted in APO, but the order is never deleted in R/3. The change pointer is not in CPP and there are no failed queues. Also, when you run CCR on planned orders, we will get an error on some orders saying "Not in APO" and the only option to reconcile that order is to "Send to APO". The option that should exist is "delete in R/3" becuase the deletion never occured in R/3.
If you send the order back to APO, the order will show in the "Production Confirmed" line of the Planning Book. This is because APO is thinking that this order is an order that was created in R/3 when in fact is it really is a SNP planned order.
Any clues to why this would happen?
thanks,
BrianHow are you getting the SNP Planned Orders to R/3 in the first place.
If you are transferring them using /SAPAPO/RRP7 then I guesss its a manual transfer and system does not consider SNP Planned Order deletion flag relevant for transfer to R/3.
You will need to look into CIF enhancement to send the deletions to R/3.
Normally SNP Planned Orders are not relevant for transfer to R/3 unless its replaced or converted to a PPDS planned order.
Somnath -
Planned Order deletion during MRP
Hi all,
We want to delete the planned orders during MRP, but before saving is done.
So, we are trying to use the BAdI MD_PLDORD_CHANGE and method CHANGE_BEFORE_SAVE_MRP .
After finding out the process order, we were trying to set the importing parameter IM_VSTAT to "L", which can be used to delete the planned order..
But since it is an importing parameter, we cannot change the value of the parameter.
Is there any alternate ways of deleting the orders before MRP is done ?
Regards,
SP.Not sure I understand the situation correctly...You want to delete the planned orders before MRP runs again. WHy do you want to do that ? Are these firmed Planned orders ?
-
Planned order deletion in mass
Hi,
I want to delete all palnned orders in the plant.
Planned order can be deleted using MD16. In MD16, MRP controller is the mandatory field. We can't delete all the planned orders in one stretch in a plant. We can delete the planned orders in a plant MRP controller by MRP controller only. My requirement is without giving MRP controller, the system has to delete all the planned orders in the given plant.
Is there anyother way to delete all the planned orders in a plant.
Regards,
V. SureshDear Suresh,
Check whether T code MDBA,can help you.
Also refer this thread.
Re: Collective deletion of Planned Orders
Regards
Mangalraj.S -
Mass T-code Of Planned Order Deletion
Dear All
Is there any mass T-code For Deletion of bulk planned order. An PIR.
Rgds
Pankaj AgarwalHi,
You can use function to execute one or more actions for a large number of planned orders simultaneously. This is possible both within the SAP System and over an interface from an external assembly control system.
Features
SAP supplies the function module MD_SET_ACTION_PLAF for action control.
This function module includes the following actions:
Explode BOM
Explode BOM, check availability
Check availability, only explode BOM in the case of a requirement
Check availability, do not explode BOM
Reset availability
Change planned order data
Schedule planned order
<b>Delete planned order</b>
Confirm planned order (in repetitive manufacturing)
Firm planned order data
Firm planned order components
Print component overview
This is in the foll link...
http://help.sap.com/saphelp_470/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Use T.code md75 to delete PIR.
Regards,
Senthilkumar SD -
Dear ,
Can it be possible by single t-code i can delete all the planned order at plant level.Dear,
You can delete a planned order by tcode MD12 / MD04 OR delete the requirement in MD62 after that run MRP (MD02) with planning mode-3 deleted and recreated. OR MD16 is the only option to delete all planned orders in mass.
And check the result.
Regards,
R.Brahmankar -
User exit/ badi needed for planned order create/change,collective ATP check
Dear All,
I'm looking for a user exit/ badi which can be used for planned orders at the stage of
mass collective availability check (COMAC tcode) update; or at some other relevant stages of mass update of planned orders.
I need after collective availability check to perform the following:
1) to copy date from "total comitment" field on header tab of planned order and paste it (replace old date) to order finish date on header screen
then
2) to start a scheduling.
Very appreciate your help.
Best Regards,
Andrey
Edited by: Andrey Kruglov on Apr 15, 2010 3:06 PM
Edited by: Andrey Kruglov on Apr 15, 2010 3:07 PMDear,
Use the BAPI : BAPI_PLANNEDORDER_CHANGE
Or use the function module MD_SET_ACTION_PLAF for Schedule planned order.
and the transaction MDAC Execute action for planned order
This function module includes the following actions:
Explode BOM
Explode BOM, check availability
Check availability, only explode BOM in the case of a requirement
Check availability, do not explode BOM
Reset availability
Change planned order data
Schedule planned order
Delete planned order
Assign the key for the respective action control to the materials in the material master (MRP 4 view).
Please refer this thread,
Re: MDVP for collective orders
Regards,
R.Brahmankar -
Kanban:How to make MRP planned order non actionable?
Scenario: In house Mfg with REM
Process : Kanban (Classic)
Example : Item "A" is in-house mfg subassembly.
When Kanban is triggered, it generates planned order. Using REM, the mfg is done against the planned order and the Kanban cycle is closed.
Meanwhile, the MRP generated planned orders are also actionable. These also can be used to mfg & stock "A".
Question :Can the MRP generated planned order be made non actionable?
Thanks,
Wish you all A very Happy, Joyous Diwali And Prosperous New Year!!
NitinHi
I beleive u have selected options of generating planned orders both by mrp and kanban(since same storage location is being planned both by MRP and Kanban). one option is when kanban generates planned orders, delete the planned ordes that are generated by mrp (eg if mrp already has created planned orders of say 400, kanban is triggered for a planned order of 100, based on settings we can immediatly decrease mrp order to 300 as the 100 is now covered by kanban(so total of 400 qty in plnd order at the end of the day)). pls let me know if this would solve ur problem.
Sam -
Convertion of planned order into Purchase Requisition
Hi,
I have a planned order with Qty 50 (I have checked in MD16 it says qty:50)
Scenario 1:
I converted it to Purchase Requisition with qty.40, with change in qty. 10 numbers. After converting with qty. difference, I checked it in MD16, it say the qty as 10.
Scenario 2:
I converted it to Purchase Requisition with qty.60, with change in qty. 10 numbers. After converting with qty. difference, I checked it in MD16, I never find that Planned order in the list.
Now my questions are:
1. In which table this difference will be stored?
2. Or is there any t-code to see this Pl. order and PR qty. difference?
3. with respect to the second scenario why the planned order is not listed if i put more qty. in Purchase requisition than in the planned order?
4. Is there any setting to be done in IMG?
Thanks in advance.
Regards,
Dhan
9600934854
Edited by: DHANAVEL SUNDARAM on Feb 23, 2011 5:20 PMHi
Planned order are just like PR assume that if you have PR of 100 Qty but still you can do PO more then of PR Qty.
In the same way in case of planned order either you can convert it to PR or Production/process Order it behaves in the same manner.
Planned order data will be stored in table PLAF but once planned order deleted or converted it will not be in any table
You can fetch the deleted planned order data or converted planned order data.
But still you can go to individual PR to see the reference of Planned order no there. -
Planned order scheduling mass update
Hello all,
Is there a way I can change the scheduling dates for the planned orders collectively. (not MD16) ?
ThankyouHi,
check the following
Mass Changes of Planned Orders (Action Control)
Use
You can use this function to execute one or more actions for a large number of planned orders simultaneously. This is possible both within the SAP System and over an interface from an external assembly control system.
Features
SAP supplies the function module MD_SET_ACTION_PLAF for action control.
This function module includes the following actions:
Explode BOM
Explode BOM, check availability
Check availability, only explode BOM in the case of a requirement
Check availability, do not explode BOM
Reset availability
Change planned order data
Schedule planned order
Delete planned order
Confirm planned order (in repetitive manufacturing)
Firm planned order data
Firm planned order components
Print component overview
In connection with an action, you can always change planned order data, for example; order quantity, dates or production version.
The function module also enables you to program further customer-specific actions.
You can execute the actions for several planned orders simultaneously.
You can create action chains, that means, have the system execute several actions in a single operation.
Activities
Define your own actions and program a report that includes these actions. As an example of this, the transaction MDAC Execute action for planned order (MRP ® Planned order ® Execute action) is available.
In this example action, you can use actions only for individual planned orders. Nor can you form action chains, only simple action transitions are possible.
Determine an action key and action controls in Customizing for MRP in the IMG activities Define action key and Define action control. An action key describes the actions that can be executed for a planned order. Action controls determine which actions are allowed and in which sequence they are to be executed.
Assign the key for the respective action control to the materials in the material master (MRP 4 view).
Regards,
nandha -
Deletion of firmed Planned orders
Hi,
I want to delete the firmed planned orders & Purchase Requisitions for Multiple plants,(Not using MRP Run) so can any one advise me if there is any SAP standard transaction or Program available.
I have tried using MD19, but here we can pick firmed Planned orders only w.r.t Material or MRP contriller, we can not select Planned orders of whole plant (or) for Multiple plants.
Please let me know if required any further information.
regards,
PRHi,
Not sure if CO41 can meet this need. If you select the lines & click on delete it is just removed from the list & not from the database. However if there is any new functionality added to CO41 for deletion would be glad to know.
However for mass deletion of planned orders you can do this via a Z program using Bapi - BAPI_PLANNEDORDER_DELETE & for Purchase Requisitions use BAPI_REQUISITION_DELETE along with BAPI_TRANSACTION_COMMIT. Provide your specifications to your abaper & it should be possible.
Regards,
Vivek -
Report to delete planned orders
Dear Friends,
Can anyone tell me which is the transaction to run the delete from live cache to delete planned orders.
Thanks
VinayHI Vinay,
Yes, you can delete the planned orders from either product view (rrp3) or receipts view (rrp4). I guess, the planned orders now are coming with the 'firm' indicator and using product view you cannot delete fixed orders.
Which version you are working?
Thanks & Regards,
Jagadeesh -
Hi, pls advise how to delete system generated (mrp) planned orders and pr's? incase the sales order is cancelled, we need to cancel those planned order or pr's generated earlier. pls advise how to delete the same.
Hi,
If the supply proposals are not firmed, then the next MRP run at plant level will clear all the planned orders / purchase requisitions which are not needed.
Planning mode with 1 should be more than enough to take care of that.
Regards,
Vivek -
How to find out manual deletion of planned orders in APO.
Planned orders are created on multiple bom levels when we call CTP from GATP for sales orders. For particular sales order there is no planned ordere at lower level. Dependent requirement is there which is uncovered.
I want to find somebody has deleted this planned order manually in apo. How to find out the same?
Regards,
SantoshHi Santosh,
If you suspect that the planned order was created but later on deleted manually, there is a cross check you can do to determine that.
In case of MATP, System uses the higher level Planned Order number to create the Dependent Demand at the lower level and only when this dependent demand is covered by a planned order it assigns the corresponding planned order number to it. So if you see the dependent demand number with same number as the higher level planned order for which it was created, you can be sure that a planned order was not created to cover the dependent demand that you see uncovered.
If the dependant demand number is not same as the planned order at higher level, then the planned order to cover the dependent demand was deleted.
I guess CTP also works the same way. If you're unsure about this, test it out.
Hope it helps.
Regards,
Mohan -
Deletion and creation of SNP Planned order
Hi,
I need to delete the SNP Planned order i.e ATP category of type 'EE' and I have to create the orders of ATP category EE through programetically. Please let me know if any BAPI's or Function modules are existed for the same.
Appriciate your help.
Regards,
RatnaHi Ratna.
To delete orders in SNP use transaction:
/SAPAPO/RLCDEL
BAPI to create planned orders:
BAPI_MOSRVAPS_SAVEMULTI3
There is also a BAPI to delete planned orders if this is more suitable.
BAPI_MOSRVAPS_DELEMULTI
Hope this helps, M
Maybe you are looking for
-
Using code of odisqlunload in a procedure...
hi... I m using code for ODISQLUNLOAD in a procedure.... code is : Command on target: OdiSqlUnload "-FILE=" "-DRIVER=<%=odiRef.getInfo("SRC_JAVA_DRIVER")%>" "-URL=<%=odiRef.getInfo("SRC_JAVA_URL")%>" "-USER=<%=odiRef.getInfo("SRC_USER_NAME")%>" "-PAS
-
Upload survey details in Activities
Hi, Could Any one let me know how to Upload Survey details in Activities(Ref tab 'Questionnaire' in Activity)? We tried the function module CRM_SURVEY_MAINTAIN_MULTI_OW,which expects XML data. Is there any alternative for this?
-
Computer running windows XP Could not update OS of iPhone 5 from 6.0 to 6.1.2. Download process hang after only 1% Download Internet Security software Norton Antivirus. Could Norton prevent the download?
-
PRD Client L.ocked - Pls Help Urgent.
Hi Gurus, Yesterday i set remote copy for PRD To DEV in background job. Now the Job is cancelled. The PRD Client is locked. If i login " The client is currently locked against logon" - This is error message display all users. Pls advise how to
-
Hi All, i am a toal n00b to the i7 setup's and related hardware oshere goes. Spec: CPU : Core i7 92o D0 stepping at 2.66 Memory : 3 x 2048 DDR3 1333, Apacer Modules Board : MSI X58 PRO-E HDD's : 1x WD 120 black Caviar 1x WD 160 black Caviar DVD\R rom