Planned orders not needed.

Dear Gurus,
             As per my client requirement.SAY BOM 1fert-1halb-1roh.If i give demand of 100for FERT.After running MRP i should get PR(100nos) for ROH alone.I should not get Planned order for FERT and HALB.I have tried via user exit.But since dependant requirements are generated from planned order of fert and halb,I am not able to get the desired output.
      Please help me in this regard.
                                                  -Guna

Hi,
Then you can create it manually htrough MD11.
Or in MD61 do the planning at ROH and then run MRP for ROH
then you will get PR for ROH alone.
Please try and come back.
Regards,
R.Brahmankar

Similar Messages

Planned order not getting generated for FG

Dear Experts,
Planned orders not getting generated for the Finished Goods - X which is having MRP Type M0 - MPS fixing type strategy group 20 which is copied fron another FG - Y , its a new product and production plan has been updated through MC88 - Rough cut planning but the planned orders are not getting generated.
And for the material valid production version exists with selection method 3 and individullcollective as 1.
Please let me know what might be the possibalities and what all the key fields i need to check.
Thanks & Regards,
Sampath
Edited by: sampath s on Jul 13, 2011 11:31 AM

Dear,
In general MPS is run for High value items ( if you use like Gold , Platimum or A class items. ).
Always only single level is used for Explosion and planning. then only you can analyse the requirements at each stage before procurement.
Otherwise if you run MPS to multi level, Bottom most high value will be procured without any notice to authorities. Even you may cancel the process in mid way. At that time what will happen to the procured high value material.
So for that purpose only single item single level MPS concept is evolved.
Fo that you run MPS at single level so that only for the first level MPS will be carried out.
Check and revert back.\
Regards,
Alok Tiwari

SNP Planned order not following resource bucket capacity/factory calendar

Hi gurus,
SCM 5.0
I am running SNP heuristics for a product and expecting planned orders for it. It has corresponding production data structure and multimixed resource. The resource has an assignd factory calendar and SNP bucket capacity. The bucket capactiy availablity dates of the resouce is consistent with the factory calendar workdays/holidays. Using simple lot for lot strategy, I am expecting heuristics to schedule the planned orders on the dates of the demand in compliance with teh SNP bucket capacity availability of the resource. APO does not schedule on holidays consistent with bucket capactiy. This is true until...
We have a public holiday in factory calendar that needs to become a workday. To remedy this, we put a special rule for the factory calendar and explicitly made that holiday into a workday. The changes were synchronized with APO, and this is also reflected in the bucket capacity of the resourc: former holiday now has bucket capacity after the calendar change. However, when running heuristics, it still does not create SNP planned order on that former holiday that has been changed into workday. Even if it is a public holiday, there is already a special rule for the factory calendar and the resource bucket capacity reflects this correctly. But SNP heuristics seems not to follow this change.
Any ideas on this? looks like a bug.

Hi Edgar,
Yes, when your resource reflects the addional capacity of the holiday turned working day, then it is expected to be considered for the SNP planned order.
Instead of SNP heuristics, you may try to check interactively in SNP planning book, if manual order creation in the bucket works out.
Since this is a mutlimix resource , it can also be checked if in PPDS planned order can be created on the day.
The above checking may not solve your problem , but will get to know if at least manully the bucket is being considered or not.
regards
Datta

Planned order not selecting BOM and Routing.

Dear All,
I am runing LTP, but for all simulative Planned order system is not selecting Routing and BOM.When i change it manually its selecting the correct BOM and Routing.
Please let me know what needed ....
Regards
Sathish

Dear,
First check the OPU5 setting for routing selection ID for your pant and order type?
Check setting of OPJM fo the selection ID linked application?
OS32 setting for alternative selection.
BOM is selected by the system based on the setting in MRP plant parameters(OPPQ) and in material master MRP view BOM explosion type. I. e based on the validity date, lot size. so on
Regards,
R.Brahmankar
Edited by: R Brahmankar on Apr 3, 2010 11:11 AM

MD06 Issue - Planned orders not getting displayed

Hello,
Planned order with the exception "Newly created order proposal" does not get displayed in MD06 with the option "Only Unprocessed MRP Lists" in the processing indicator.
I am running MD06 report with the following parameters:
Plant
MRP Controller
Exeception Group - All exception selected except 8-Terminations
Processing indicator - Only unprocessed MRP LIsts, Only with new exceptions
My material which has a newly created planned order thorugh MRP run with exception "1 - Newly created order proposal" does not get displayed.
Only when I specify Only processed MRP lists or All MRP LIst in the processing indicator, this material gets displayed. The planned order is for a Stock Transfer order to this plant (receiving plant). How is the MRP LIst processed?
Please help me out with this issue.
Sincerely,
Ketan

Hi Ketan,
When you execute the MD06 report, you would find a column with the heading CI, if am right it would be just after the MRP cntlr, here you would find a Pencil & a tick mark. If you find them both, it means the row is unprocessed, but if you find only a tick mark it means that the row is processed.
So now check for the planned order, it would be just a tick mark & hence would be showing only for the processed MRP list or all MRP lists.
To process a row or unprocess, just click on the icon & it changes.
Check & revert if it answers your query.
Regards,
Vivek

Planned orders not getting generated

Hi friends,
we are running material level MRP MD02 (make to `order scenario).
when we run MRP instead of generating planned orders, it is generating Purchase requisition . i can see purchase requisition generated instead of planned orders in MD04 screen.(we are facing problem with only one material).BOM of FERT Contains 3 HALB.all the mrp parameters have been maintained.
thanks in advance.

Hi
1. Since you are telling it is MTO scenario you need to use the MD50
2. Also in the MRP screen check the Create Purchase Reqn try the setting "" 3 Planned orders"""
3. As you have mentioned only for that particular material - kindly check if any scheduling margin key has been maintained. ??
check and revert back
Reg
dsk

Planned order not getting generated at plant level

Hi experts,
When i run MRP for a particular plant in T- code (MD01) Planned order is not getting generated but when MRP is done against a material in T - code (MD02) in the same plant planned order gets generated... Is there any customizing to generate planned order in plant level.....
Regards,
Joseph.
Edited by: joseph5885 on Aug 12, 2010 9:23 AM

Dear Joseph,
No it is not recommended. only in emergance cases this will be done
Usually in MDRE and MDAB will be scheduled before MRP run at background for inconistancies in planning file enries
So the above said t-codes will take care of the same
Added
Refer this link
[Planning file entry;
Regards
Madhu
Edited by: K.Madhu Kumar on Aug 12, 2010 6:53 AM

Availability check - Planned order not considered

Hi Experts,
I am facing an issue in Make to Order scenario.
My sale order is of quantity 10.
when i save the sale order, i get confirmed quantity as Zero.
But in my controls setting of availability check i have selected consider all firmed planned order.
Now i have a firmed planned order for this sale order.
but still system shows confirm quantity as Zero.
Let me know what is the correct procedure and whether planned orders are considered for availabilty check for MTO scenario or not.
Regards,
Birendra

Hi Venu,
Please find answers of your query:
1. First have you maintained any safety stock in mm01:
No
2. Tcode: Md04
3.> Tcode : Co09
4> If that stock related to batch Please check in MSC2N Because if batch is restricted you cant get stock
Not related to batch
5.> schedule lines
Let me know if any more information required.
Regards,
Birendra

VA02: Production order/ plan order not processed when credit limit exceeds

Hi,
In VA02, when I try to process a Production order/ plan order from sales document , i get an information message saying that ' Subsequent function not possible due to credit block.' It is going into the incomplete logs. But as per my client's requirement, the order should be processed even if the credit limit exceeds though the message pops up. the message number is V1849. Can you please tell me how to do that?
Regards,
Lohitha

hello.
stop the credit check for particular order type.
VOV8-order typeCheck credit limit--choose option
No credit limit check
A Run simple credit limit check and warning message
B Rund simple redit limit check and error message
C Run simple credit limit check and delivery block
D Credit management: Automatic credit control
for particular item category
choose item category : uncheck credit check active check box
for particular condition
OVA8----assign routine for that..
write coding
let me know anything requires
regards,
Rushikesh

Production and planned order not scheduling

Dear Experts,
Created new plant ,scheduling parameters,order type parameters ,confirmation parameters.
Scheduling parameters: Detailed Scheduling ,Forward etc.
created BOM, Routing,WC.
Maintained Work center Scheduling Tab formulas entered,Routing Machine,setup time entered.
System showing at the of creating production order Scheduling Start time and end time is same.
scheduling not done in production order.
Anyone explain process for scheduling
Regards,
Naresh Reddy.

Hi Naresh,
The problem is mainly due to the work center scheduling formulas only. Maintain the scheduling formulas as SAP001 for setup and SAP002 for machine. In OPU3 check the automatic scheduling check box, adjust dates as 'adjust basic dates , adjust basic requirements to operation date' and recreate the production order.
Let me know if u are still facing the same problem after doing these settings.
Regards,
Krishna Chandra

Open Planned Order Quantity

Hi Experts,
for a particluar material I need the Open quantity of Planned orders for displaying in a custom report.
Please suggest from which table or by logic can i fetch this quantity .
Note: Not from any std report - i need table lable detail

Hi
Will this give the Open quantity of the Planned Order ( not converted ) ???
in PLAF table only existing plan orders info will be there
no productions orders
Regards
kumar

Mapping issue in planned Order

Hi Experts,
I am working on a planned order interface(File -> RFC -> File). There is a mapping provided like below in the request,
In the request mapping, i am mapping the source structure to the BAPI request. based on the creation/change/cancel request from the source structure for planned order, i need to populate the corresponding target structure in BAPI Request.
i need to do the mapping based on the creation/change/cancel like below,
Source Field                            Target Field
action(add,change,cancel)         Add strcuture
   Work Id----
>EXTAUFNR(0..1)
                                                       Field(0..1)
SupplierProductCode----
>Value(0..1)
Quantity----
> "
PlannedStartDate----
> "
PlannedEnddate----
>"
                                                   Change structure
                                                                                Cancel structure
The above structure is given for 'add' planned order.
based on the source, target 'field' need to map as constant as below at runtime,
for 'value' in target 'SupplierProductCode' the 'Field' need to given as 'MATNR'
for 'value' in target 'Quantity' the 'Field' need to be given as 'BDMNG'
for 'value' in target 'PlannedStartDate' the 'Field' need to be given as GSTRP'
for 'value' in target 'PlannedEnddate' the 'Field' need to be given as 'GLTRP'
Kindly help me to get the values to 'value' and insert manually to the 'field' at runtime.
Regards,
Maha.

Hi,
Please check below link it may helps you
Re: Why the basic finish date is not adjusted in planned orders
Regards,
Ram

Planned Order convert to PR

Hi
When I do conversion of planned order to PR, the defaulted PR type is NB, but I would like to change it to ZNB (customised), now I need to change it manually during the PR screen, how can I defaulted the PR type to ZNB. I look at the IMG, in the planned order conversion to PR, the NB there is for planned order not for PR, I cannot find the relationship of the planned order type to PR type..look at PR IMG, cannot find anything as well..
anyone done this before please share, this should be something common as of many company do change the standard PR type of NB to ZNB..
thanks
dannnysao

Hi,
The system determines the document type from the stettings u are making in "planned order Profile" in Customising for MRP. There u define the order type, the procurement key and the special procurement key and also the account assignment category. So based on the procurement key and the special procurement key maintained in the Marterial master, the document type is selected.
Production > Materials Requirement Planning > Procurement Proposals > Planned Order > Define order profile
Choose the planned order type - NB1 Within this you specify the P req doc type to be used.
Through MRP group and the different PR document type for MRP generated PR is possible only if you assign the document type to MRP group in the MRP configuration.
You need to perform some modifications in as per OSS Note : 46919 .
Please try and come back.
Regards,
R.Brahmankar

Scrap qty in planned order in COOISPI

Hi
When using COOISPI for planned orders the result does not show the field SCRAP.
The field SCRAP can be choosen in the result screen, but for planned orders it is alway zero (0).
When running COOISPI for process orders the scrap field is filled correctly.
Field in Planned order: PLAF-AVMNG
thanks
Vijay

Hi vijay.anukonti,
to see the quantity SCRAP in the COOIPI for planned order you need to set this value in the planned order (view Hdr - field Scrap Quantity). Otherwise it will came with no value.
Make sure you check the type of planned order and if it allows to have this info (for example type LA Stock Order).
Regards,
Felipe Tavares

Combined Planned order

Hi gurus,
i am working for steel industry, i am using MILL_OC functionlaity.
i want to combine 10-12 planned orders into single planned order ( not production order) and that planned order should be get
converted into one single prod order.so that at the time of GRN, only one prod order will be there.
( coz in MILL_OC system converts all planned order into different prod orders)
is this possible to do this??
thanks & regards
sandeep

Dear,
Yes you can do this in MILL_OC,
First, you need to select the original orders planned order we want to combine. We need to define one of the selected orders as a reference order. As soon as we have selected the orders, a newplanned order is created using the master data of the reference order. This new order is the combined order. In order to create the original orders as items in the combined order.
Please refer this link,
[Combination order|https://www.sdn.sap.com/irj/scn/weblogs?blog=/cs/junior/view/wlg/15188]
Regards,
R.Brahmankar

Planned orders not needed.

Similar Messages

Maybe you are looking for