Planned orders to Purchase Requisitions and orders
Hi,
Just wondering if this is possible. I heard this from a client and want to confirm if it's true.
The client owns the technology and has contractors manufacture the product.
A planned order is generated by the client and based on the type of contractor, some of them are converted to Purchase orders and others to Purchase requisitions.
Is this possible? I was thinking, planned orders ans purchase requisitions are completely different entities. Planned orders are for internal manufacturing which are subsequently changed to Production orders and purchase requisitions are for external procurement that would be converted to Purchase orders.
But converting the Planned orders to Purchase Requisitions and orders is what I could not digest.
Is there any possibility of this case?
Thanks.
Hi,
We can create planned orders & convert them into purchase requisition or into production order.
In the material master ,mrp2 view give the procurment type as 'X', for both internal & external procurement.
Also include purchasing view for this material.
When you run mrp using md02, a planned order will be created for the rquirement (Eg:say 100 nos given using t.code md61).
Use t.code md04 to view the stock/requirement list.
Here double click the planned order, you can see tabs such as convert into purchase requisition, into production order, into process order.
Click convert into pur req & enter 50 Nos. Then a pur req will be created which can be further converted into pur order.
Again come to md04 screen.
You can see a planned order & pur req for 50 nos.
This planned order can be converted into production order & 50 nos can be produced internally.
Hope this clears your doubt.
Regards,
Senthilkumar SD
Similar Messages
-
Planned orders to Purchase Requisitions and Purchase Orders
Hi,
Just wondering if this is possible. I heard this from a client and want to confirm if it's true.
The client owns the technology and has contractors manufacture the product.
A planned order is generated by the client and based on the type of contractor, some of them are converted to Purchase orders and others to Purchase requisitions.
Is this possible? I was thinking, planned orders ans purchase requisitions are completely different entities. Planned orders are for internal manufacturing which are subsequently changed to Production orders and purchase requisitions are for external procurement that would be converted to Purchase orders.
But converting the Planned orders to Purchase Requisitions and orders is what I could not digest.
Is there any possibility of this case?
Thanks.Hi,
We can create planned orders & convert them into purchase requisition or into production order.
In the material master ,mrp2 view give the procurment type as 'X', for both internal & external procurement.
Also include purchasing view for this material.
When you run mrp using md02, a planned order will be created for the rquirement (Eg:say 100 nos given using t.code md61).
Use t.code md04 to view the stock/requirement list.
Here double click the planned order, you can see tabs such as convert into purchase requisition, into production order, into process order.
Click convert into pur req & enter 50 Nos. Then a pur req will be created which can be further converted into pur order.
Again come to md04 screen.
You can see a planned order & pur req for 50 nos.
This planned order can be converted into production order & 50 nos can be produced internally.
Hope this clears your doubt.
Regards,
Senthilkumar SD -
Report with purchase requisitions and purchase orders: how?
Hi,
I need to get a list of items bought with their purchase requisitions and purchase orders (when they exist). This can be done looking at each purchase order (ME23N), ou purchase requisition (ME53N), and writing it down. But in some cases, I have to do it on about 450 operations. I'd like to get this list without having to search for each requisition ou order. I can get a complete list of orders and requisitions, but without any relationship between them (they are mixed as if they were the same thing, but there´s a field telling it that row is an order or a requisition). Using some macros in excel, I can find this relationship in 40% of the cases (for example, if item 421351 was purchased only once, an order for item 421351 is related to a requisition for item 421351). Is there any way to get this list automatically? Or is there any field that tell me this relationship?
Thanks,
Francisco Morbiolo
Votorantim Cimentos
Votorantim, SP - BrazilSorry, I forgot to tell this: I don´t have access to SQ01/SQ02/SQ03.
I get the orders and requisition reports using ZGLPS020.
Thanks,
Francisco Morbiolo
Votorantim Cimentos
Votorantim, SP - Brazil -
Purchase requisitions and purchase orders
Hello Gurus,
In contrast, by default, both purchase requisitions and purchase orders can be generated automatically for the item category ALES, will you please tell me the sequence and where to create purchase requisitions and purchase orders ?
Many thanks,Hello,
The PO is getting created automatically because of the Create PO automatically check in the item categroy ALES.
But in normal case, the PR will be generated, it is a request for purchase, it should get approved by the purchasign dept, then create PO with reference to the PR.
Prase -
Badi for purchase requisition and stock transfer order
Hi,
Could anybody please tell the BADI to update the item details (dates etc) in the 'Purchase requisition' and stock transfer orders.
I could find ME_PROCESS_REQ etc but could not locate the methods to modify the item level data.
Thanks & regards,
RavishHi,
You can use the same badi which you found out.
ME_PROCESS_REQ.
In that there is a method process_item.
There you can get the line items of the PR.
Then in the POST method you can do the stock transfer .
In the check method also you can check the entire process of PR.
With Regards,
Sumodh.P -
Automatic Link of Documents in purchase requisition and purchase order
Dear guru.
I have created a document in CV01N and I have linked it in document data view of a material master(MM02).
For every purchase requisition and purchase order position created for this material I need that the system execute an automatic link to this document.
How can I do that ?
ThanksHello,
You can only derive the attached documents from the preceding documents only (for example. Purchase Requisition). Deriving the attached document from the material master is not a standard scenario. This scenario is not in the system. You need to manually attach it.
bg, Gabor -
Changes in short text in Purchase Requisition and Purchase Order
Dear experts,
Can you help me with the following issue:
During creation of Purchase Requisition and Purchase Order with Account assignment category K-Cost center the field Short text to allow input of data in it.
In all other cases During creation of Purchase Requisition and Purchase Order without Account assignment category K-Cost center the field Short text to be forbidden for input of data
Is it possible?
Thank you
RegardsDear Vasil Pavlov ,
This cannot be realize in sap standard system. You may want to write your own coding using
ME_PROCESS_REQ and ME_PROCESS_PO for purchase requisition and purchase order respectively.
Best Regards,
Loke Foong -
SAP workflow for purchase requisition and purchase order
Hello Sap Workflow,
Can you please help me on building workflow for purchase requisition and purchase order with the necessary screen shots ?
your quick response will be greatly appreciated.
Thanks in AdvanceHi,
Please check http://help.sap.com .
http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92761846f311d189470000e829fbbd/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92775546f311d189470000e829fbbd/frameset.htm
Configuration guides are available in SAP Solution Manager.
Regards,
Masa -
Report on list of purchase requisitions and related POs..
Hi,
I have a requirement to generate a simple abap report to display a list of purchase requisitions and its related POs. If my understanding is correct, for a single purchase requisition, multiple POs can exist, right ? Can someone help me with the select query for this ? also can you let me know typically what can be the basic fields displayd in such a report ?
I need to understand the relationship between the tables involved for pur req and Pur orders.
thanksHi check this code... to get PO and PR related to SO..
REPORT z_so_info.
TABLES: vbak, vbap, afko, afpo.
*Field catalog
TYPE-POOLS: slis.
DATA: lv_repid TYPE sy-repid VALUE sy-repid,
xfield TYPE slis_t_fieldcat_alv,
afield TYPE slis_fieldcat_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(25) text-002.
SELECT-OPTIONS: so_so FOR vbak-vbeln OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-003.
PARAMETERS:
p_kunnr LIKE vbak-kunnr, " sold-to
p_kunwe LIKE vbak-kunnr. " ship-to
SELECTION-SCREEN END OF BLOCK b2.
*Constants
CONSTANTS: c_zor TYPE vbak-auart VALUE 'ZOR',
c_we TYPE vbpa-parvw VALUE 'WE',
c_ag TYPE vbpa-parvw VALUE 'AG'.
c_space TYPE space.
*Ranges
RANGES: ra_parvw FOR vbpa-parvw,
ra_kunnr FOR vbpa-kunnr.
*Tables
DATA: BEGIN OF gt_output OCCURS 0,
vbeln LIKE vbak-vbeln, " sales order number
posnr LIKE vbap-posnr, " SO item number
matnr LIKE vbap-matnr, " material number
sh LIKE vbpa-kunnr, " Ship-to
sp LIKE vbpa-kunnr, " Sold-to
lifnr LIKE ekko-lifnr, " Vendor
bstnk LIKE vbak-bstnk, " PO number
banfn LIKE vbep-banfn, " Purchase requi
po_st TYPE char30, " PO status text
pstyv TYPE vbap-pstyv, " Item catagory
aufnr LIKE afpo-aufnr, " Production Order
prd_stat TYPE string, " Prd order status
END OF gt_output.
DATA: wa_output LIKE gt_output.
FIELD-SYMBOLS: <fs_output> LIKE gt_output.
*Table for sales order and PO
TYPES : BEGIN OF gs_data,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
pstyv TYPE vbap-pstyv,
matnr TYPE vbap-matnr,
END OF gs_data.
DATA: gt_data TYPE STANDARD TABLE OF gs_data,
wa_data TYPE gs_data.
*Table for Production Orders
TYPES: BEGIN OF gs_prd,
aufnr TYPE afpo-aufnr,
posnr TYPE afpo-posnr,
kdauf TYPE afpo-kdauf,
kdpos TYPE afpo-kdpos,
wepos TYPE afpo-wepos, "Goods Receipt Indicator
elikz TYPE afpo-elikz, "Delivery Completed Indicator
objnr TYPE aufk-objnr, "Object number
getri TYPE afko-getri, "Confirmed Order Finish Date
gltri TYPE afko-gltri, "Actual finish date
END OF gs_prd.
DATA: gt_prd TYPE STANDARD TABLE OF gs_prd,
wa_prd TYPE gs_prd.
*Table for partner data
TYPES: BEGIN OF gs_partner,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
parvw TYPE vbpa-parvw,
kunnr TYPE vbpa-kunnr,
END OF gs_partner.
DATA: gt_partner TYPE STANDARD TABLE OF gs_partner,
wa_partner TYPE gs_partner.
TYPES: BEGIN OF gs_po,
ebeln TYPE ekkn-ebeln,
ebelp TYPE ekkn-ebelp,
vbeln TYPE ekkn-vbeln,
vbelp TYPE ekkn-vbelp,
END OF gs_po.
DATA: gt_po TYPE STANDARD TABLE OF gs_po,
wa_po TYPE gs_po.
TYPES: BEGIN OF gs_preq,
vbeln TYPE vbep-vbeln,
posnr TYPE vbep-posnr,
banfn TYPE vbep-banfn,
END OF gs_preq.
DATA: gt_preq TYPE STANDARD TABLE OF gs_preq,
wa_preq TYPE gs_preq.
TYPES: BEGIN OF gs_po_stat,
ebeln TYPE ekko-ebeln,
procstat TYPE ekko-procstat,
lifnr TYPE ekko-lifnr,
END OF gs_po_stat.
DATA: gt_po_stat TYPE STANDARD TABLE OF gs_po_stat,
wa_po_stat TYPE gs_po_stat.
*Field symbols
FIELD-SYMBOLS: <fs> TYPE tj02t-txt04,
<fs_temp> TYPE tj02t-txt04,
<fs_stat> TYPE char30.
START-OF-SELECTION.
PERFORM fr_build_range.
PERFORM fr_get_data.
PERFORM fr_build_fc.
PERFORM fr_output.
*& Form fr_get_data
text
--> p1 text
<-- p2 text
FORM fr_get_data.
*Get SO
SELECT avbeln aposnr apstyv amatnr
FROM vbap AS a
JOIN vbak AS b
ON avbeln = bvbeln
JOIN vbpa AS c
ON bvbeln = cvbeln
INTO TABLE gt_data
WHERE b~vbeln IN so_so
AND b~auart EQ c_zor "Only Sales Orders
AND c~kunnr IN ra_kunnr. "from selection screen
DELETE ADJACENT DUPLICATES FROM gt_data COMPARING vbeln posnr.
*get data of the production order
IF NOT gt_data[] IS INITIAL.
SELECT aaufnr aposnr akdauf akdpos awepos aelikz
b~objnr
FROM afpo AS a
JOIN aufk AS b
ON aaufnr = baufnr
INTO TABLE gt_prd
FOR ALL ENTRIES IN gt_data
WHERE a~kdauf EQ gt_data-vbeln
AND a~kdpos EQ gt_data-posnr.
ENDIF.
*Get partner data
IF NOT gt_data[] IS INITIAL.
SELECT vbeln posnr parvw kunnr
FROM vbpa
INTO TABLE gt_partner
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln.
ENDIF.
*Get Purchase Order
IF NOT gt_data[] IS INITIAL.
SELECT ebeln ebelp vbeln vbelp
FROM ekkn
INTO TABLE gt_po
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln
AND vbelp EQ gt_data-posnr.
SELECT vbeln posnr banfn
FROM vbep
INTO TABLE gt_preq
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln
AND posnr EQ gt_data-posnr.
ENDIF.
IF NOT gt_po[] IS INITIAL.
SELECT aebeln aprocstat a~lifnr
FROM ekko AS a
JOIN ekpo AS b
ON aebeln = bebeln
INTO TABLE gt_po_stat
FOR ALL ENTRIES IN gt_po
WHERE b~ebeln EQ gt_po-ebeln
AND b~ebelp EQ gt_po-ebelp.
ENDIF.
*Move data to output table
LOOP AT gt_data INTO wa_data.
wa_output-vbeln = wa_data-vbeln.
wa_output-posnr = wa_data-posnr.
wa_output-pstyv = wa_data-pstyv.
wa_output-matnr = wa_data-matnr.
READ TABLE gt_po INTO wa_po WITH KEY vbeln = wa_data-vbeln
vbelp = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-bstnk = wa_po-ebeln.
READ TABLE gt_po_stat INTO wa_po_stat WITH KEY ebeln = wa_po-ebeln.
IF sy-subrc EQ 0.
wa_output-lifnr = wa_po_stat-lifnr.
CASE wa_po_stat-procstat.
WHEN '01'.
wa_output-po_st = 'Version in process'.
WHEN '02'.
wa_output-po_st = 'Active'.
WHEN '03'.
wa_output-po_st = 'In release'.
WHEN '04'.
wa_output-po_st = 'Partially released'.
WHEN '05'.
wa_output-po_st = 'Released Completely'.
WHEN '08'.
wa_output-po_st = 'Rejected'.
ENDCASE.
ENDIF. "inner read subrc
ENDIF. "outer read subrc
READ TABLE gt_preq INTO wa_preq WITH KEY vbeln = wa_data-vbeln
posnr = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-banfn = wa_preq-banfn.
ENDIF.
READ TABLE gt_prd INTO wa_prd WITH KEY kdauf = wa_data-vbeln
kdpos = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-aufnr = wa_prd-aufnr.
*get the purchase requisition for production order as well
SELECT SINGLE banfn
FROM ebkn
INTO wa_output-banfn
WHERE aufnr EQ wa_prd-aufnr.
*Get the status of the production order
PERFORM fr_get_prd_stat USING wa_prd-objnr
CHANGING wa_output-prd_stat.
ENDIF. " sy-subrc
READ TABLE gt_partner INTO wa_partner WITH KEY vbeln = wa_data-vbeln
parvw = c_we.
IF sy-subrc EQ 0.
wa_output-sh = wa_partner-kunnr.
ENDIF.
READ TABLE gt_partner INTO wa_partner WITH KEY vbeln = wa_data-vbeln
parvw = c_ag.
IF sy-subrc EQ 0.
wa_output-sp = wa_partner-kunnr.
ENDIF.
APPEND wa_output TO gt_output.
CLEAR: wa_data, wa_prd,wa_partner,wa_output.
ENDLOOP.
ENDFORM. " fr_get_data
*& Form fr_build_range
text
--> p1 text
<-- p2 text
FORM fr_build_range .
*Range for partner function
MOVE 'I' TO ra_parvw-sign.
MOVE 'EQ' TO ra_parvw-option.
MOVE 'SH' TO ra_parvw-low. " we
APPEND ra_parvw.
CLEAR ra_parvw.
MOVE 'I' TO ra_parvw-sign.
MOVE 'EQ' TO ra_parvw-option.
MOVE 'SP' TO ra_parvw-low. " ag
APPEND ra_parvw.
CLEAR ra_parvw.
*Range for ship-to and sold-to
MOVE 'I' TO ra_kunnr-sign.
MOVE 'EQ' TO ra_kunnr-option.
MOVE p_kunnr TO ra_kunnr-low.
APPEND ra_kunnr.
CLEAR ra_kunnr.
MOVE 'I' TO ra_kunnr-sign.
MOVE 'EQ' TO ra_kunnr-option.
MOVE p_kunwe TO ra_kunnr-low.
APPEND ra_kunnr.
CLEAR ra_kunnr.
ENDFORM. " fr_build_range
*& Form fr_build_fc
text
--> p1 text
<-- p2 text
FORM fr_build_fc .
sales order number
afield-fieldname = 'VBELN'.
afield-seltext_s = 'Sales #'.
afield-ref_tabname = 'VBAK'.
APPEND afield TO xfield. CLEAR afield.
sales ITEM number
afield-fieldname = 'POSNR'.
afield-seltext_s = 'Item #'.
afield-ref_tabname = 'VBAP'.
APPEND afield TO xfield. CLEAR afield.
Material Number
afield-fieldname = 'MATNR'.
afield-seltext_s = 'Material #'.
afield-ref_tabname = 'VBAP'.
afield-outputlen = 10.
APPEND afield TO xfield. CLEAR afield.
*Vendor Number
afield-fieldname = 'LIFNR'.
afield-seltext_s = 'Vendor Num.'.
afield-ref_tabname = 'EKKO'.
APPEND afield TO xfield. CLEAR afield.
ship-to-party
afield-fieldname = 'SH'.
afield-seltext_s = 'Ship-to'.
afield-ref_tabname = 'VBPA'.
APPEND afield TO xfield. CLEAR afield.
sold-to-party
afield-fieldname = 'SP'.
afield-seltext_s = 'Sold-to'.
afield-ref_tabname = 'VBPA'.
APPEND afield TO xfield. CLEAR afield.
*PO number
afield-fieldname = 'BSTNK'.
afield-seltext_s = 'PO NUM'.
afield-ref_tabname = 'EKKO'.
APPEND afield TO xfield. CLEAR afield.
*PO status
afield-fieldname = 'PO_STAT'.
afield-seltext_s = 'Step'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
*PO step status
afield-fieldname = 'PO_ST'.
afield-seltext_s = 'PO.Status'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
*Purchase requisition
afield-fieldname = 'BANFN'.
afield-seltext_s = 'Pur. Req.'.
afield-ref_tabname = 'VBEP'.
APPEND afield TO xfield. CLEAR afield.
*Item catagory
afield-fieldname = 'PSTYV'.
afield-seltext_s = 'Itm. Catg'.
afield-ref_tabname = 'VBAP'.
APPEND afield TO xfield. CLEAR afield.
*Prodcution Order number
afield-fieldname = 'AUFNR'.
afield-seltext_m = 'Prod.Order'.
afield-ref_tabname = 'AFKO'.
APPEND afield TO xfield. CLEAR afield.
*PRODCUTION status
afield-fieldname = 'PRD_STAT'.
afield-seltext_s = 'Prd. Step'.
afield-ref_tabname = 'zbacklog_v2'.
afield-outputlen = 20.
APPEND afield TO xfield. CLEAR afield.
*PRODUCTION step status
afield-fieldname = 'PRD_ST'.
afield-seltext_s = 'Prd. Status'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
ENDFORM. " fr_build_fc
*& Form fr_output
text
--> p1 text
<-- p2 text
FORM fr_output .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT =
it_fieldcat = xfield[]
i_default = 'X'
i_save = 'A'
TABLES
t_outtab = gt_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " fr_output
*& Form fr_get_prd_stat
text
-->P_WA_PRD_OBJNR text
FORM fr_get_prd_stat USING p_objnr CHANGING p_prd_stat.
DATA: lt_status TYPE STANDARD TABLE OF jstat,
wa_status TYPE jstat,
lv_status TYPE tj02t-txt04,
lv_temp2 TYPE char5,
lv_buff TYPE string.
CALL FUNCTION 'STATUS_READ'
EXPORTING
client = sy-mandt
objnr = p_objnr
only_active = 'X'
TABLES
status = lt_status
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
LOOP AT lt_status INTO wa_status.
IF wa_status-stat(1) EQ 'I'.
SELECT txt04 FROM tj02t
INTO lv_status
WHERE istat EQ wa_status-stat
AND spras EQ 'E'.
ENDSELECT.
lv_temp2 = lv_status.
CONCATENATE lv_temp2 p_prd_stat INTO p_prd_stat
SEPARATED BY ','.
ENDIF.
CLEAR: wa_status, lv_status, lv_temp2.
ENDLOOP.
lv_buff = p_prd_stat.
*Status of Production Order
IF lv_buff CS 'CRTD'.
p_prd_stat = 'Not Active'.
ENDIF.
IF lv_buff CS 'REL'.
IF lv_buff CS 'GMPS'.
p_prd_stat = 'Printed In Prod'.
ELSE.
p_prd_stat = 'Printed'.
ENDIF.
ENDIF.
IF lv_buff CS 'TECO'.
p_prd_stat = 'Technically Compt.'.
ENDIF.
ENDFORM. " fr_get_prd_stat -
Creating purchase Requisition and release Overview
Hello,
We have some User which have the authorization to create a purchase Requisition and also to release it by themselves.
We have to Monitor this cases and I' looking for a possibility to check this on a easy way.
I found the Report "Changedocu_read". There I can check several changes in the PR and see who released it. But there I can not see which User created the PR.
The table EBAN has the informations about the User who created the PR and if it had to be released and some more informations. But the informations who released the PR is missing.
I tryed a table-join of the tables EBAN and CDHDR. But it was not possible, because the PR Number (Filed "BANFN" in the EBAN) has not the same format as the number in the Filed "object value" in the table CDHDR.
Perhaps someone has an idea ?
Or there is an Standard Transaction which I did not found to have an overview of the PR and the releases
It would be enough to see following informations with one Join or Transaction:
-PR Number
-Creation Date
- Transaction code
-Change Date
-Release Status
-Released date
-Released by User
I have the same Topic also by purchase orders and the release of them.
Thank you in advance
Regards
DirkThanks both for the quick reply.
@AKPT
The Transaction is nice and helpful to Display some informations. But similar results I also receive when I use the Programm : "changedoc_read". I also had the idea to join the informations of the 2 sources in Excel. For me this Workaround would be ok.
But unfortunately I' m looking for an simply way (for the Enduser). To get this informations mentioned above in one overview directly in SAP.
They have to use this check regularly, to Monitor if there were some wrong Releases.
If there is not such a way then we have to join it in Excel.
But if you have some other suggestions I'm happy to hear them.
Regards
Dirk -
Which table holds the link between Purchase requisition and Reservations ?
Hi Guys,
We are using MRP and as a result of the MRP run the reservations are converted to purchase requisition. When i look at transaction MD04 it shows me the Purchase requisition against a reservations.
I would like to know which table holds this information? I mean which table will give me the reservations tied to a purchase requisition or vice a versa.
I have looked into RESB and RSBD but could not find what i am looking at. RESB table has BANFN field for purchase requisition but this field is not populated. RSBD table hold the Purchase requisition and reservations but it only holds the relation for Direct procurement and not for all.
Any idea where i can find the Preq and Reservations created through MRP run?
Thanks
VJTry RKPF..
thanks
jz -
Purchase requisition and invoice verification report
Hi,
pls. I need to display a report with purchase requisition and invoice verification pending, what I mean is an standard trx. to display purchase requisition with or without invoice verification.
Thanks for cooperation.
Regards.hi
I guess thereis no standard report which combines both. You have to go for a Z-report. use the details FROM Txns ME5A & MB5S for your requirement.
Regards -
Purchase Requisition and Reservation Print out - Output Message determinatn
Dear Experts,
Can Anybody please explain the process of Output Message determination for Purchase Requisition and reservation.
Thanks in Advance
VijayHi,
There is not standard message determination, you have to customized the transaction and output for PR & Reservation. -
MRP: Delete Purchase Requisitions and Create Planned Orders
Hi there,
I have a scenario, where in a material (HALB) was marked as externally procured. MRP was run for FERT material. The dependent requirements for FERT were created. Planned orders of the HALB material were changed to Purchase Requisitions.
Later, the procurement type of material was changed to Inhouse Production.
Now, I want all the Purchase requisitions that were created to be deleted and Planned orders should be created when I run MRP.
I tried all the possibilities, but of no success.
Please lemme know if there is any possibility to delete the P.Rs and Create Planned orders by running MRP.
Regards,
ABCI Haven't read the Plan order is converted in to PR Before
If YOU convert the plan order in to PR, system will firm the Requirement, YOU need to remove the firm indicator FIxed iD in PR Before doing the MRP Run Again
Do the following thing in PR
In PR Remove the Fixed ID in Quantities and Dates tab of the item
and Rerun the MRP with Planning Mode 3 It will create a plan order
Edited by: Sundaresan . E. V on Oct 29, 2010 6:39 PM -
Tell me the link between Purchase Requisition and Sales Order Number
tell me the link between Purchase Requisition(MEREQ_TOPLINE-BANFN_EXT) and Sales Order Number(COBL-KDAUF)
Hi Puja,
If you have created sales order for matrial which has both procurement type,after MRP run you will get
planned order.This planned order you can convert to purchase requisition for external procurement or
subcontracting.
You will find sales order number in details of purchase requisition ( ME52N) in Account assignment tab.
Hope this help you.
Regards,
Raja
Maybe you are looking for
-
To Find Include for Enhancement for Particular Transaction
Hi Friends, Could You Plz assist me... How to find out the User Exit for Particular Transaction. Like for ME23N, we have a Include RV64A701 OR for VA01, we have the include MV45AFZZ and so on for every Transaction, which we believe as the U
-
How to restrict data that is displayed in adf query
Hi all, i have a VO with query criteria, which i have added to the jsf page as adf query panel with table. There may be particular queires that return large number of records. Suppose i want to restrict the number of records being displayed to 10,000
-
I want to change my account payment method to none and I do not have a credit card yet.Plus, iTunes gave a message saying that I need to review my account and when I go there,the none payment method is hidden.
-
Using old power point plug with new computer
I have just bought a Macbook in new york and forgot to get an adapter from a USA(2 straight prongs) to UK (3 chunky prongs)power point. Can I slide off the powerpoint plug from the adapter on my 5 yr old ipod and put it onto the adapter for the new c
-
APs disappearing after enabling a new WLAN
Hello, We have a 4402 WLC running software version 4.2.207.0. There are 5 WLANs enabled and we have 13 AIR-AP1010 accesspoints connected to the WLC. The WLC was recently upgraded from version 4.0.206.0 to provide compatibility with the newer WLCs. Th