Planned overhead is calculating wrongly in CK11N run, it is just more than double

Hi Gurus
1) While running CK11N overhead cost is calculating wrongly on base (material price). In my case I have maintained 1% Overhead on raw material for Duty in cost sheet. In my case no routing, and my FG is getting produced by process order. My Raw material cost is showing Rs. 2,364.45 but my Duty is showing Rs. 48.73, When I run CK11N for Finished goods.
When I Check the costing structure it is showing all the material for costing, if i drill down there it is calculating correctly for Raw materials. Say heavy furnace oil material cost is Rs. 36,140.16 /M.T and overhead is Rs. 361.40 and for all raw material it is calculating correct 1%. But for my finished goods it is just more than 2%.
As per my understanding over head is calculating for RM once @ 1% and later material cost + overhead cost getting calculated by 1% again.
Please see the attachment. I have furnished a statement for this also.
2) Also Please tell me the T-Code for costing run as actual cost. and how can I show a comparison report on planned and actual report for a product costing.
3) My scenario is this is a power generation Co. Not possible to maintain activity cost. What they want to do is. on the last day of a month they will take the trial balance for the plant/ business area and will set the percentage in cost sheet (Actual for current month / planned for next month) for admin, manpower and other costs based on raw material GL values.
So I have created a cost sheet where I have maintained base and assigned those RM GL/ Cost elements and other costs I have maintained in cost sheet based on row No. 10 (base) and assigned secondary cost elements and percentages assigned as per overhead type and plant, in cost component structure I have maintained same cost elements as set earlier in cost sheet.
Please find the file attached
Please suggest me if I M wrong.
Thanks & Regards
Subrata

Hi.
In itemization of CK11N over head is showing correct. But the material cost for RM is already after charging overhead. I have checked the itemization of Process order there for the first material was Rs. 144.56, but in the itemization view of CK11N it is showing Rs.148.90/- That means exactly after adding 3% overhead which I maintained in cost sheet.
Itemization of Ck11N
Itemization of COR2
Please Help
Thanks & Regards
Subrata

Similar Messages

My 24" iMac seems to gets the spinning colored ball a lot, seems it is running slow a lot more than it did before any suggestion?

My 24” iMac seems to gets the spinning colored ball a lot, seems it is running slow a lot more than it did before any suggestion?

Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
In the Memory tab, are there a lot of Pageouts?

My macbook pro is running slow and freezing more than once a minute.

I do not know much about computers, but I do know this is not normal for my computer.
Processor 2.9 GHz Intel Core i7
Memory 8 GB 1600 MHz
Graphics Intel HD Graphics 4000 1024 MB
Software OS X 10.9.5
So about two days ago I was using the computer and noticed that it was freezing and giving me the little spinning circle of evilness. This happens every time I open anything, try to type(which is making this an extremely long process), load a screen in the MMORPG I play(Or even just general play time). I can be doing anything, and the computer will freeze for anywhere between 5 seconds, and up to 10 minutes. Things normally continue on fine, or sometimes my internet screens fail to load. I have ran ccleaner and cleaned up a few things, and then ran AVG which found quite a few files or something called Genio which I deleted. I have also upgraded all the latest updates that I can, but now when I try to open the app store to double check to see if there are any more updates, and it will not open, it freezes. I have reset my comps system management controller, and I have reset my PRAM. My desktop is not cluttered, and I'm more confused than ever.
If there is any more information I can give, I will try. Please help??

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Error in running Jasper Reports for more than 100 users in stress test

I have created a web application with Jasper reports. during the stress test, we were able to run the same report simultaneously for 100 concurrent users, after that we get the following error. I hope there is no problem in my code (correct me if i am wrong)
We use Web Sphere
The error we get is as follows:
java.io.FileNotFoundException: /apps/HewittProjects/installedApps/TBIA/workforce_CUR.ear/workforceServer4.16.4.war/reports/timesheet_mgr2.jasper (Too many open files)
           at java.io.FileInputStream.open(Native Method)
           at java.io.FileInputStream.(FileInputStream.java:106)
           at com.wily.introscope.agent.probe.io.ManagedFileInputStream.(ManagedFileInputStream.java:89)
           at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:85)
           at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:64)
           at com.workforcesoftware.servlets.ReportServlet2.getCompiledReport(ReportServlet2.java:712)
           at com.workforcesoftware.servlets.ReportServlet2.doPost(ReportServlet2.java:423)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
           at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
           at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
           at com.ibm.ws.webcontainer.servlet.ServicingServletState.service(StrictLifecycleServlet.java:333)
           at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
           at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
           at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
           at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
           at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:61)
           at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:1009)
           at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:529)
           at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:208)
           at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:134)
           at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:321)
           at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
           at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:120)
           at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:250)
           at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
           at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
           at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:652)
           at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:448)
           at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:937)
NESTED BY :
net.sf.jasperreports.engine.JRException: Error loading object from file : /apps/HewittProjects/installedApps/TBIA/workforce_CUR.ear/workforceServer4.16.4.war/reports/timesheet_mgr2.jasper
           at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:92)
           at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:64)
           at com.workforcesoftware.servlets.ReportServlet2.getCompiledReport(ReportServlet2.java:712)
           at com.workforcesoftware.servlets.ReportServlet2.doPost(ReportServlet2.java:423)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
           at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
           at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
           at com.ibm.ws.webcontainer.servlet.ServicingServletState.service(StrictLifecycleServlet.java:333)
           at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
           at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
           at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
           at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
           at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:61)
           at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:1009)
           at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:529)
           at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:208)
           at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:134)
           at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:321)
           at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
           at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:120)
           at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:250)
           at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
           at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
           at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:652)
           at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:448)
           at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:937)
if this really cannot find the file, then how could it run successfully for 100 users?
Have anyone experienced this problem?
Thanks for your help.

ummm seems odd to have 100 users making a report.. that can be the limitation of your application..

Run Smart Index Wizard more than once?

Afternoon all,
RH8 generating WebHelp.
Quick question on how the Smart Index Wizard works. I've run it once, made no changes to any topic, ran it again and got many more entries added to the Index.
So, should one run the Smart Index Wizard multiple times? Until it says no more entries found?
Is it adding entries the second time based on the existing Index entries it's already created?
Thanks for any light you can shed...
Patrick

Colum,
Thanks for the reply. I'm rapidly coming to the same conclusion about the Smart Index Wizard. It looks like, if "Find New And Existing Index Keywords" is selected, the wizard will add keywords based on topic content AND existing index entries. This would explain why the wizard finds new words each time it's run.
My multiple runs of the wizard on my small project resulted in 6448 entries added the first time, 4191 the second, 154 the thrid and 69 entries added the fourth. Seems like it picks up nearly every word and phrase outside of the ignore list.
A lot of what the wizard puts out is clearly useless. The wizard is also not as useful as it could be since it filters on topic Status and not CBT. Howver, I've saved off the .hhk file as I do like to peruse it for words I've missed and suggested phrases. It's also good to give you a veiw of just how many places a word or phrase is being used - helps me to see how common it is and whehter I want to include it or not.
Patrick

Macbook won't charge or run off mains for more than a few seconds

Last week my Macbook power adapter seemed to fail - the light had disappeared and my battery slowly ran out of power. I tried using a different power cable into the adapter to see if the fuse had gone, but this made no difference. After trying several plugs and trying to use it with the battery removed, I decided to purchase a new adapter.
This worked instantly - the light came on and my Macbook was no longer dead. However, this only lasted for a few seconds or minutes, when the light on the Magsafe plug went out and the Macbook powered off again.
After trying several things I realised that the problem wasn't really with the adapter - it seems to be with the Macbook itself. If I disconnect the power cable from the adapter and reconnect, the light comes on and it charges again. This happens when the battery is in the Macbook, but also when there is no battery and I run just from the adapter. I can run the laptop pretty much indefinitely as long as I'm happy with 0-10% power in the battery and continually disconnecting and reconnecting the adapter, literally every 30 seconds or so!
Any ideas whether this is likely to be the logic board or just the power connector inside the laptop? I've tried resetting the SMC already (by disconnecting battery and adapter then holding down the power button for 5 seconds) but that has zero effect..

I too have problems charging. The macbook and macbook pro adapters seem flawed; if one looks into the problem on any of the many forums, you can see that this problem is widespread. The dang adapter works intermittently. There seems to be no rhyme or reason behind when it 'decides to work or not,' I think it is somewhere in the vicinity of 65% off and approximately, 35% on; in other words, it works properly only about one out of three times. When I first got the macbook it might have been a bit better but this problem of intermittent charging might be getting worse. All I know is several times lately, I have had to wait until randomly retrying it got it to function and by then my battery will have exhausted down to below 10%. Has anyone discovered any tricks which help kick this adapter in? I have heard rumors of a recall but that is all it is, I believe . . .

KT3 Ultra2 won't run XP 2500 at more than 151 Mhz

Not an unusual topic I know but I haven't found any solutions in this forum as yet!
With my XP 2000 cpu installed my system is stable when the FSB is overclocked to 150 Mhz. When I install the XP 2500 cpu and set the FSB in the BIOS (latest vertsion) to 166 Mhz it won't access the hard drives at all. My initial thought was the psu so I reduced the system to 1 hdd, 1 DVD rewriter, 256Mb memory and tried again. No change! Then I started reducing the FSB until at 151 Mhz it would boot but as an XP 1900 cpu. The VIA chipset drivers are up to date.
I' don't know what to try next. Any ideas?

I can only say, I'm running my KT3 Ultra2 with XP 2800+ without any problem at 333 Mhz. Remember you have to upgrade Bios with ver 5.7 so Mobo can work with a 166 FSB. Also, better try starting with only one memory module. You can take a look at my P.S. specs. on my sig. It's not too good, but enough for this rig. So, don't dispose yet your 2500+, try and tell us how did it go.
A bit off: Do you like this Forum ? If yes, Read the post on first page in this Forum " Forum Team on Strike...". If you want this Forum to stay as it is now, please send a mail to MSI. Adress is mentioned in first post.

Can I run Exchange 2013 Schema more than once

I have started in installing Exchange 2013. I ran schema update using the Exchange 2013 RTM. Should I go ahead and install Exch2013 RTm and just run the updates afterwards or should I run schema update again using the Exch2013 SP1 setup.exe?

Exchange 2013 CU5 is the latest one so if you haven't installed Exchange yet, I would suggest you to run the schema update again for
CU5 and then install instead of installing RTM first...
But if something is blocking you to run Schema upgrade again currently then you can go for Exchange 2013 RTM install too, only thing is you would end up spending double time installing and upgrading and fighting with known bugs between RTM and CU5...
Blog |
Get Your Exchange Powershell Tip of the Day from here

Can you run the Import Wizard more than once at the same time?

We're going to run the Import Wizard to import content from one BO environment to another. Can we, at the same time, run the Import Wizard to import different content between those two environments (using the same source and destination both times)? Obviously we'd have to run the wizard on different workstations.
Would this cause any issues? If so, what kind of issues would you expect?
Thanks,
Laura

Yes, this is possible. The source and destination CMSs treat the requests from the Import Wizard like any other -- increasing the number of active Import Wizard sessions just increases the load on these CMSs. Before running multiple Import Wizard sessions, be sure there is ample processing power (CPU / memory) to handle the increased load. and of course, avoid 'touching' the same content in the two sessions in order to avoid unpredictable results.
-Mike

Dbms_xplan.display_awr display more than one plan

Hi,
There are times when running dbms_xplan.display_awr , shows more than one execution plan.
How can i know which of the plans is the most recent ?
For example :
SYS@qa> SELECT * FROM table(dbms_xplan.display_awr('0gtqfjcypx66z'));
Show two diffrenets plan :
Plan hash value: 3366355658
Plan hash value: 2273523394
Thanks

It is more than likely both plan will be relevant. A single sql_id does not mean that there is a single plan active.
Below is a very simple testcase that highlights the same sql_id with 2 different plans being used at the same time. Even though the same namespace is shared the underlying objects are different.
There are a lot of other reasons for a child cursor to not be shared apart from the query be executed in different schema.
-- 1. Create 2 users with identical tables but different data. 1 table has an index.
sqlplus / as sysdba
grant dba to test1 identified by test;
grant dba to test2 identified by test;
create table test1.x (x varchar2(1));
create table test2.x (x varchar2(1));
declare
i number;
begin
for i in 1..125000 loop
insert into test1.x values ('N');
end loop;
insert into test1.x values ('Y');
commit;
end;
insert into test2.x values('T');
create index test1.x_idx on test1.x(x);
exec dbms_stats.gather_table_stats('TEST1','X', method_opt=>'for all columns size skewonly');
exec dbms_stats.gather_table_stats('TEST2','X');
alter system flush shared_pool;
-- Connect as the first user and observe the results
conn test1/test
select * from x where x='Y';
SELECT * FROM table(DBMS_XPLAN.DISPLAY_CURSOR);
alter session set nls_date_format='DD-MON-YYYY:HH24:MI:SS';
select sql_id, PLAN_HASH_VALUE,CHILD_NUMBER,LOADS,USERS_EXECUTING,FIRST_LOAD_TIME,LAST_ACTIVE_TIME, OPEN_VERSIONS from v$sql where sql_text like 'select * from x%';
pause
-- Connect as the second user. See the second child cursor being created with a different plan
conn test2/test
select * from x where x='Y';
SELECT * FROM table(DBMS_XPLAN.DISPLAY_CURSOR);
alter session set nls_date_format='DD-MON-YYYY:HH24:MI:SS';
select sql_id, PLAN_HASH_VALUE,CHILD_NUMBER,LOADS,USERS_EXECUTING,FIRST_LOAD_TIME,LAST_ACTIVE_TIME, OPEN_VERSIONS from v$sql where sql_text like 'select * from x%';
pause
-- Now we go back to the first user and execute the query again. Notice that the last_active_time is updated again
conn test1/test
select * from x where x='Y';
SELECT * FROM table(DBMS_XPLAN.DISPLAY_CURSOR);
alter session set nls_date_format='DD-MON-YYYY:HH24:MI:SS';
select sql_id, PLAN_HASH_VALUE,CHILD_NUMBER,LOADS,USERS_EXECUTING,FIRST_LOAD_TIME,LAST_ACTIVE_TIME, OPEN_VERSIONS from v$sql where sql_text like 'select * from x%';

Macbook pro runs slow, sometimes it is more than a minute to load a webpage and sometimes freezes.

My MacBook Pro is running very slowly, sometimes more than a minute to open a webpage or access a link on the page. Using Safari and sometimes it freezes and the force quit window doesn't appear using option-command-escape. Then only holding down the power button shuts down the computer. Thanks for any help.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Issue more than Planned in Production Order

Hi All,
I have a problem with 2007B SP00 PL11 for Issue for Production.
In 2005B, I can issue the BOM Components more than planned. But in 2007B version, I am unable to issue more than planned. When I right-click at Production Order to Issue Component or at Issue for Production and copy from Production order. no items are displayed.
I have already issued in full at the 1st issue. Then subsequently, i need to issue some more qty for certain components. But i am unable to do that.
Has this feature of issue more been changed in 2007B?
What other method can be adopted without changing the planned qty?
Please advise.
Regards
Jessie

Hi guys,
Thanks for the fast response.
Duplicate the previous issue to create the over-issue is not a good solution. It is very troublesome. itis not a good procedure to ask customers to do this step.
Changing of the planned qty will mean that i am not able to trace my initial plan and have to go back to the BOM. again, this is not logical. especially when the queries are using figures directly from production order tables.
Since it can be done in 2005 version, why is SAP taking it out this feature in 2007?

The internet browser with more thane one video running is keep crashing after installing Adobe flash.

If I run any website contains more than one video like this website for example :
http://www.neatoxv-21.org ,where it has two videos talking about the cleaning vacuum neato xv-21, and both videos
are running at the same time, then suddenly the explorer will crash, But in other broswers like google chrome it works fine.
To double check, I un-installed the software and then I restarted my computer, I installed the software again but the same issue.
I am using windows 7, so to be sure I missed nothing I updates the windows from Microsoft website and also
I am sure that I have the latest internet explorer update.
Now, the funny thing, I did the same process with Google chrome and it works fine!!!
I am totally confused, wht could be the reason??
Please advice..

Update - I've now tested this with different internet connections, different computers and different operating systems. I've also just received a response from my internet service provider who said:
"I've tested in Firefox, and it looks as if the buttons are crashing the browsers' flash plugin. This being the case, it is not going to be anything related to your computer, the internet connection, or the web server.
In all likelihood, it will be an issue with how the flash tour is coded, which I presume is created automatically by the Tourweaver package you mention. You will need to pursue their support for advice on this problem as it is something with the flash file)s( which isn't working correctly."
So, hopefully Easypano support will be able to fix the problem. Obviously no connection at all with Adobe After Effects

Plan Overhead Calculation for Project Definition

Hi All,
I have a requirement to calculate the Plan Overhead for the Project Def. (CJ46, CJ47).
I have tried using BDC for CJ46 and CJ47 but Overhead cost is not reflecting in COSS table.
I also tried using program RKAZCJ47 ( using SUBMIT statement ), which executes successfully and overhead cost is also calculated and can be verified thru entries in COSS table, but it displays a log which I am not able to bypass in background.
I do not want to show this log to user.
Helpp..

Hi,
In my development I need to call this program to calculate the plan overhead. So I used SUBMIT statement to execute this program and overhead is calculated and stored in COSS table. but this program displays the log using ALV and SPLITTER control after calculation which is displayed to user. I want to supress this log.
This processing should execute in background without displaying any log.
this submit call is written in enhancement for CJ40 which executes after user saves the cost planning
regards
Edited by: Shaurabh Pandey on Feb 19, 2010 12:47 PM

Mid month action_Pension (/3f4) calculation wrong

Hi All,
I get one problem , when payroll run for employee, whose action run in the mid of the month. for ex. 15.05.2010(Transfer action)
In that case the pension amount (/3f4) is calculating double or more than 541...which is wrong.
Kindly provde the input to resolve the same....
Regards,
Mahesh
Edited by: Mahesh Shewale on Sep 1, 2010 1:08 PM
Edited by: Mahesh Shewale on Sep 2, 2010 7:18 AM

Hi Mahesh,
Please make changes in User exit provided as per your requirement and then check the results
There are 2 user exit
EXIT_HINCALC0_002 for pension basis.
EXIT_HINCALC0_007

Planned overhead is calculating wrongly in CK11N run, it is just more than double

Similar Messages

Maybe you are looking for