Planned/process ord creation on sales order creation
Hello Experts,
Is it possible to create planned/process orders on creation of a sales order? The scenario is MTO. Also, if any of you has done this, do let me know an example of where such a requirement comes to use.
Thanks,
Pradeep.
Hi
You requirement will fillfull by the planning Strategy 82 - assembly processing.
1. It creates production orders directly once the sales order is saved. (because the KMFA req type is assigned to this strategy)
2. You do not have to run MD50 to create planned orders and then convert to production order for this strategy.
The setting you need to set :
1 In material master , MRP 2 view / the planning Strategy as 82 .
Edited by: raj on Jun 9, 2009 10:23 AM
Similar Messages
-
Sales order creation -pricing- IDOC processing
Hi All,
Issue is related to pricing procedure and condition types while processing the IDOC for sales order creation.
The condition type ZSTD maintained in the pricing procedure AAAA, has reference condition type as ZZZZ, when we are processing IDOC, system is throwing error as " condition type ZZZZ, is not maintained for A V AAAA.
This error will not populate when we create the sales order manually.
Kindly let me know if programs needs to be checked and or any configuration mistakes involved in this.
Regards,
SAN>
Vivek Baddula wrote:
> Hey Teju,
>
> Could you pls put me the block of code how you are populating to the idoc edidd. So that we can guide you.
>
> And also tell me the message status 51 in IDoc what it is showing , and also see the segment( maybe E2EDP05) specific to pricing for the IDoc you populated.
>
> Regards,
>
> Vvieks
>
> 'Grow and help others to Grow'
Vivek,
Thanks for the reply.
Status 51 reads "condition ZPRL is missing in pricing procedure A V ZPRINT, WE are not passing any value as a part of tsting. The system should pick price values from condtion record. -
Sales order creation using webdynpro in ABAP
Plz give the process how to create sales order creation using webdynpro in ABAP. if not possible plz let me know how to create in JAVA.
It is very urgent. I hope i will get it very soon.
Thanks all
SaiIn your WDA application, all you need to do is call the BAPI BAPI_SALESORDER_CREATEFROMDAT2 when the user clicks some button. Most likely, you can put the code for this BAPI call in the onAction method for your button.
Regards,
Rich Heilman -
TCODE for Process order creation against Sales order
Hi gurus,
Pls tell me what is the TCODE for Process order creation against Sales order
Eg. CO07 is for production order from sales ordeTypically, in MTO scenario after the sales order is created you run MRP which will create planned order and then you convert that into production order using MD04.
Or if you have SD settings correctly directly from the release of Sales Order it will create planned order or production order.
please check and revert back. -
What are the User Exits for Sales Order creation process?
Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
MindaugasPlease check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar -
Automatic Single Item multi-level planning on sales order creation
Hi all,
I am using strategy 50 and want planning for single item to be carried out at the time of sales order creation to avoid MRP run everytime sales order is created..In order to achieve it i checked Automatic Planning Indicator in "OVZG" for the requirement class "045" which is requirement class for sales order of strategy 50. But still unable to achieve the desired result..
Please guide me through.
best regards,
shahHI shah,
in sales order go to Procurement tab there u will get the requirement type. system will determine requirement class based upon following criteria
1) by strategy group in material master
2) if strategy group not there then MRP group
3) if mrp group not there then material type
4) by this also not able to fine the requirement type then special rule is used with the help of item category and mrp type
5) if this also fails then it will go with item category only
6) this also fails then it will give any requirement type
hope this is clear
regards
ramakant -
Condition types in Sales order creation process
Hi Friends...
While creating the sales order with BAPI,
What is the condition type i have to pass for pricing procedure...
There many condition types for my pricing procedure, which one o have to select...
Some of them are mannual, and other reuired, which one I have to pass?
I want the information related to this condition types.., as here no SD consultant availble for me.
Sales order creation, Line item error
Thanks,
Naveen.IHi Friends...
Please let me know is it mandatory to give condtion type while creating the sales order...?
I am using BAPI_SALESORDER_CREATEFROMDAT2 to create my sales order...
http://www.sap-img.com/abap/bapi-salesorder-createfromdat2.htm
Thanks,
Naveen.I -
Replacing Profit Center value while sales order creation process - VA01
Hi,
Profit Center replacement in Tcode VA01 and VA02
I want to replace the profit center value (COBL- PRCTR) in Account assignment TAB in sales order creation time VA01 and VA02 by using custom logic (Line item Material Group and Sales District VBKD-BZIRK).
Can anyone tell me what exit or BADI I can use for this ( I tried some of them and not working properly).
1. In Exit I need to have the value of Sales District VBKD-BZIRK and Line item u2013 Material Value - These 2 field values I need in the exit.
Thanks in advance.
Rajesh.What do you mean this is not correct user exit. That is an include and there are user exits within that include.
Have you tried save document prepare? If yes, what have you done?
Don't just blindly say 'that is not correct' or don't expect someone code for you. You better try in different way and learn how to do it. I just got it worked in my system just in 5 minutes in debug.
You are not going to change COBL-PRCTR but you should change XVBAP-PRCTR.
put a break point in userexit_save_document_prepare in include MV45AFZZ
Loop through XVBAP and change PRCTR as per your logic.... This changed PRCTR carried till end (billing document/accounting document). I can see the profit center document with changed profit center.
Good luck... if that solves. Mark this thread appropriately.
Most importantly, you better close your previous threads if they are answered. if you solved by yourself post the solution so that others can benefit from that.
@moderator, please check this guy posts
Edited by: Sampath Kumar on Apr 28, 2011 1:16 PM -
Sales Order Creation Process.....!!
All,
I have been trying to call "BAPI_BUSPROCESSND_CREATEMULTI" remotely (from .Net environment with SAP .Net Connector ). I understand this is the FM, which is being called from most of other important FM, like BAPI_ACTIVITYCRM_CREATEMULTI or from Sale Order creation BAPI.
Anyway the issue I am facing is that, I have to call "BAPI_BUSPROCESSND_PROCSETTINGS" before calling "BAPI_BUSPROCESSND_CREATEMULTI" to persist the data in Data base tables (even if I am using Transaction Commit).
While calling these FMs remotely, if I call "BAPI_BUSPROCESSND_PROCSETTINGS" and then "BAPI_BUSPROCESSND_CREATEMULTI", it does not work. But If make a wrapper BAPI in CRM with call to "BAPI_BUSPROCESSND_PROCSETTINGS" and then to "BAPI_BUSPROCESSND_CREATEMULTI" within the same LUW, it works.
Now my problem is that I want to use Std BAPIs only (like "BAPI_BUSPROCESSND_CREATEMULTI") and don't want to use any wrapper BAPI..
Anybody could guide me how to surmount the issue I am facing..?Also if somebody knows what this "BAPI_BUSPROCESSND_PROCSETTINGS" is suppose to do?
Thanking all in advance....I had faced the similar issue while calling the RFC's exists remotely.
I was calling couple of BAPI's in the same session and failing to commit the work in the same LUW.
I have resolved it by calling BAPI_TRANSACTION_COMMIT sequentially in the same LUW.Try to do this.
Do you mention the 'DESTINATION' parameter to the BAPI's ?
And using wrapper RFC's is also recommended.
Thanks,
Thirumala. -
User Exit/ Enahancement/BADI in the sales order creation process
Hi,
We have an EDI process for creating a sales order, we want to change one of the partners on some of the lines according to the document type,
We know how to do it using the MV45AFZZ user exits but we want to do it using a BADI or an Enhancement,
Can anyone help us find a User Exit/ Enahancement/BADI ?
Thanks,
MickeyHi,
Thanks for the quick answer,
i created an implementation for this BADI and put a break point there but it didnt stop there,
i also tried a break point on FM "SXV_GET_CLIF_BY_NAME" to see if this BADI is on the list but i didnt find it,
i tried creating the sales order via VA01 and via the IDOC process,
Thanks,
Mickey -
Enhancement of Popup window of Open contracts during Sale Order Creation.
Hi,
I have a requirement as follows.
1. During creation of Sales Order we are getting a pop up window with the list of open Contracts.
Currently there are following fields in that popup.
1. Doc Num, 2. Doc Type 3. Valid From 4. Valid To.
Now my requirement is to add one more value (Document Description) in this. Please help me if any one did simillar enhancement.Transaction Code - VA01 Create Sales Order
Exit Name Description
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
No of Exits: 15
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal -
Hi
can i create sub screen in creation of sales order item
in user exit mv45afzz
my requirement is when user click on any line item than than i need to call subscreen with some information
pls guide me on thisHI
<b>
Sales realated exits</b>
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
V46H0001 SD Customer functions for resource-related billing
V45W0001 SD Service Management: Forward Contract Data to Item
V45S0004 Effectivity type in sales order
V45S0003 MRP-relevance for incomplete configuration
V45S0001 Update sales document from configuration
V45P0001 SD customer function for cross-company code sales
V45L0001 SD component supplier processing (customer enhancements)
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45E0001 Update the purchase order from the sales order
V45A0004 Copy packing proposal
V45A0003 Collector for customer function modulpool MV45A
V45A0002 Predefine sold-to party in sales document
V45A0001 Determine alternative materials for product selection
SDTRM001 Reschedule schedule lines without a new ATP check
SDAPO001 Activating Sourcing Subitem Quantity Propagation
https://www.sdn.sap.com/irj/sdn/wiki
Check this link
Sail -
Sales order creation for a project
Dear all,
I would like to know how to create quotation ,sales order, delivery and Billing for a total project. Let me explain the situation.. Customer has 4 different product.. they have 4 Plants to produce those materials.. They will sell each products individually and combination of others also. Their sales process is Customer will place an order for the total project which involves supply erection and Training. The erection and training may take 3 months to 1 year. The requirement is customer wants to create quotation and sales order creation in SAP. Also they want to map the erection and Training in SAP. They would like to capture the expenses involved during the erection and Training period. In this case excise duty, Sales Tax and service Tax all are involved in the same project.
Can any one suggest some idea
Thanks in advance
SriramHi,
It is understood that your client has 4 plants for 4 different materials. Your client sells materials and service (1.Installation of equipment and 2.Training the users). Your client wants to know the cost of the sold items (Materials and services). The billings are subjected to all applicable taxes.
As you know, these requirements can be mapped in SAP by SD and PS modules.
SD Module: Whatever the customer places the order (either partially or as total), you can create quotations. The materials are finished goods (FERT) and service materials (DIEN). The pricing procedure should consider all applicable duties and taxes.
The business flow: Quotation >> Sales order >> Delivery of goods >> Billing (VF01) >> Excise Invoice >> Account receivable.
Note: To link the sales order with PS module you have to maintain respective u2018WBS Elementu2019 in the Account assignment tab of the sales order. This is used for planned revenue in PS.
Since you are supplying goods from all plants, maintain all plants to Sales organization and distribution channel combination in Assignment of Enterprise structure.
PS Module:
If the customer orders for an entire project including supply of materials, installation and training the users, create a project definition for that project in the project system. Assign a main WBS element under the project definition. Assign lower level WBS element according to your need. Under the WBS element network is assigned. Under the network activities are assigned. Under the activity there are activity elements. There are different types of activities; internal, external etc.
You can assign different WBS element for services. Under this the relevant activities are assigned.
You can budget for the project; you can assign supplementary budget if it is required.
When you release the project the Purchase requisitions are generated. The MM persons will create PO and procure the materials for the project.
All the materials required are initiated from PS. Here every activity is routed through PS including service. So, all the expenses are captured.
By settlement rule, the cost is arrived at different levels.
The configuration is to be done accordingly.
Hope this give you an idea on the subject.
Regards,
K Bharathi -
SALES order creation using BAPI's
Hai to all,
I want to create sales order using bapis .I am new to this topic could any body guide me how to create sales order step by step process using bapis.
Thanks in advance.
Regards,
Chaitanya** プログラムID       : ZBAPI_SALESORDER_CREATE *
** プログラム名称      : Upload Sales Order Creation *
** 処理概要         : *
** 作成者           : Karthik.P *
** 作成日           : 2006/08/10 *
REPORT ZBAPI_SALESORDER_CREATE LINE-SIZE 132 MESSAGE-ID ZMMBAPI .
Internal table definition *
****<<<<<Communication Fields: Sales and Distribution Document Header>>>>>>>>
DATA: GT_ORDER_HEADER_IN LIKE BAPISDHD1,
*******<<<Checkbox Fields for Sales and Distribution Document Header>>>>>>>>>
GT_ORDER_HEADER_INX LIKE BAPISDHD1X,
*****<<<<<Return Parameter>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
GT_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE, " Return Messages
*********<<<Communication Fields: Sales and Distribution Document Item<>>>>>
GT_ORDER_ITEMS_IN LIKE BAPISDITM OCCURS 0 WITH HEADER LINE, " Item Data
*********<<<Communication Fields: Sales and Distribution Document Item>>>>>>>
GT_ORDER_ITEMS_INX LIKE BAPISDITMX OCCURS 0 WITH HEADER LINE, "Item Data Checkbox
*********<<<Communication Fields: Sales and Distribution Document Item>>>>>>>
GT_SALESDOCUMENT LIKE BAPIVBELN-VBELN , "Number of Generated Document
*********<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
GT_ORDER_PARTNERS LIKE BAPIPARNR OCCURS 0 WITH HEADER LINE, "Document Partner
********<<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
GT_ORDER_SCHEDULES_IN LIKE BAPISCHDL OCCURS 0 WITH HEADER LINE, "Schedule Line Data
****<<<<<<<<Checkbox List for Maintaining Sales Document Schedule Line>>>>>>>>
GT_ORDER_SCHEDULES_INX LIKE BAPISCHDLX OCCURS 0 WITH HEADER LINE, " Checkbox Schedule Line Data
*******Communication Fields for Maintaining Conditions in the Order
GT_ORDER_CONDITIONS_IN LIKE BAPICOND OCCURS 0 WITH HEADER LINE,
******Communication Fields for Maintaining Conditions in the Order
GT_ORDER_CONDITIONS_INX LIKE BAPICONDX OCCURS 0 WITH HEADER LINE.
Data definition *
DATA: BEGIN OF GT_FT_SALES OCCURS 0,
DOC_TYPE(4) , "Sales Document Type
SALES_ORG(4) , "Sales Organization
DISTR_CHAN(2) , "Distribution Channel
DIVISION(2) , "DIVISION(2)
SALES_DIST(6) , "Sales district
INCOTERMS1(3) , "Incoterms (part 1)
INCOTERMS2(28) , "Incoterms (part 2)
PMNTTRMS(4) , "Terms of payment key
PRICE_DATE(8) , "Date for pricing and exchange rate
PURCH_NO_C(35) , "Customer purchase order number
PURCH_NO_S(35) , "Ship-to Party's Purchase Order Number
EXCHG_RATE(8) , "Directly quoted exchange rate for pricing and statistics
CURRENCY(5) , "SD document currency
MATERIAL(18), "MATERIAL
TARGET_QTY(13) , "Target quantity in sales units
ITEM_CATEG(4) , "Sales document item category
MATL_GROUP(8) , "Material Group
PURCH_NO_C1(35), "Customer purchase order number
SALES_DIST1(6) , "Sales district
INCOTERMS11(3) , "Incoterms (part 1)
INCOTERMS21(28), "Incoterms (part 2)
PMNTTRMS1(4) , "Terms of payment key
EXCHG_RATE1(8) , "Directly quoted exchange rate for pricing and statistics
PRICE_DATE1(8) , "Date for pricing and exchange rate
TRG_QTY_NO(5) , "Factor for converting sales units to base units (target qty)
DIVISION1(2) , "DIVISION1
SALQTYNUM(5) , "Numerator (factor) for conversion of sales quantity into SKU
GROSS_WGHT(3) , "Gross Weight of the Item
NET_WEIGHT(15) , "Net Weight of the Item
UNTOF_WGHT(3) ,"Weight Unit
PARTN_ROLE(2) ,"Partner function
PARTN_NUMB(10) ,"Customer Number 1
********<<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
ITM_NUMBER(6) ,"Item number of the SD document
REQ_QTY(8) , "Schedule line date
DLV_DATE(8) , "Schedule line date
MS_DATE(8) , "Material availability date
LOAD_DATE(8) , "Loading time (local time with reference to a shipping point)
GI_DATE(8), "Time of goods issue (local DATE, with reference to a plant)
TP_DATE(8) , "Transportation planning -time (local w/ref. to shipping pnt)
ITM_NUMBER2(6) , "Condition item number
END OF GT_FT_SALES,
MSG(240) TYPE C, " Return Message
E_REC(8) TYPE C, " Error Records Counter
REC_NO(8) TYPE C, " Records Number Indicator
S_REC(8) TYPE C, " Successful Records Counter
T_REC(8) TYPE C. " Total Records Counter
selection block for EXCEL UPLOAD FILE>>>>>>>>>>>>>>>>>>>>>>>>
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
PARAMETERS FILE TYPE IBIPPARMS-PATH OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
*<<<<AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILE .>>>>>>>>>>>>
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILE .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
IMPORTING
FILE_NAME = FILE.
**<<<<<<<<<<<<<<<<<START-OF-SELECTION.>>>>>>>>>>>>>>>>>>>>>>>>>>>
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD' "#EC *
EXPORTING
FILENAME = FILE
FILETYPE = 'DAT'
TABLES
DATA_TAB = GT_FT_SALES
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11.
IF SY-SUBRC <> 0 .
MESSAGE E000.
ENDIF.
SKIP 3.
FORMAT COLOR COL_HEADING INVERSE ON.
WRITE 40 TEXT-001.
FORMAT COLOR COL_HEADING INVERSE OFF.
SKIP 1.
FORMAT COLOR COL_NEGATIVE INVERSE ON.
WRITE :/ TEXT-002, 13 SY-MANDT , 104 TEXT-003, 111 SY-UNAME,
/ TEXT-004, 13 SY-DATUM , 104 TEXT-005, 111 SY-UZEIT.
FORMAT COLOR COL_NEGATIVE INVERSE OFF.
SKIP 3.
LOOP AT GT_FT_SALES.
PERFORM SLALE_UPLOAD_DATA.
ENDLOOP.
T_REC = E_REC + S_REC.
SKIP 3.
FORMAT COLOR COL_TOTAL INVERSE ON.
WRITE: /38 TEXT-007, T_REC.
FORMAT COLOR COL_TOTAL INVERSE OFF.
FORMAT COLOR COL_NEGATIVE INVERSE ON.
WRITE: /38 TEXT-008, E_REC.
FORMAT COLOR COL_NEGATIVE INVERSE OFF.
FORMAT COLOR COL_TOTAL INVERSE ON.
WRITE: /38 TEXT-009, S_REC.
FORMAT COLOR COL_TOTAL INVERSE OFF.
*& Form SLALE_UPLOAD_DATA
text
--> p1 text
<-- p2 text
FORM SLALE_UPLOAD_DATA .
*******<<<<<<<<<<Communication Fields: Sales and Distribution Document Header>>>>>>
GT_ORDER_HEADER_IN-DOC_TYPE = 'TA'.
GT_ORDER_HEADER_IN-SALES_ORG = GT_FT_SALES-SALES_ORG . "'0001'
GT_ORDER_HEADER_IN-DISTR_CHAN = GT_FT_SALES-DISTR_CHAN. "'01'
GT_ORDER_HEADER_IN-DIVISION = GT_FT_SALES-DIVISION. " '01'
GT_ORDER_HEADER_IN-SALES_DIST = GT_FT_SALES-SALES_DIST ."'000001'
GT_ORDER_HEADER_IN-INCOTERMS1 = GT_FT_SALES-INCOTERMS1. "'CFR'
GT_ORDER_HEADER_IN-INCOTERMS2 = GT_FT_SALES-INCOTERMS2 . "'HAMBURG'
GT_ORDER_HEADER_IN-PMNTTRMS = GT_FT_SALES-PMNTTRMS . "'0001'
GT_ORDER_HEADER_IN-PRICE_DATE = GT_FT_SALES-PRICE_DATE ."'20060818'
GT_ORDER_HEADER_IN-PURCH_NO_C = '32'.
GT_ORDER_HEADER_IN-PURCH_NO_S = '32'.
GT_ORDER_HEADER_IN-EXCHG_RATE = GT_FT_SALES-EXCHG_RATE ."'1.00000'
GT_ORDER_HEADER_IN-CURRENCY = GT_FT_SALES-CURRENCY . " 'EUR'
********<<<Checkbox Fields for Sales and Distribution Document Header>>>>>>>>>
GT_ORDER_HEADER_INX-DOC_TYPE = 'X'.
GT_ORDER_HEADER_INX-SALES_ORG = 'X'.
GT_ORDER_HEADER_INX-DISTR_CHAN = 'X'.
GT_ORDER_HEADER_INX-DIVISION = 'X'.
GT_ORDER_HEADER_INX-SALES_DIST = 'X'.
GT_ORDER_HEADER_INX-INCOTERMS1 = 'X'.
GT_ORDER_HEADER_INX-INCOTERMS2 = 'X'.
GT_ORDER_HEADER_INX-PMNTTRMS = 'X'.
GT_ORDER_HEADER_INX-PRICE_DATE = 'X'.
GT_ORDER_HEADER_INX-PURCH_NO_C = 'X'.
GT_ORDER_HEADER_INX-PURCH_NO_S = 'X'.
GT_ORDER_HEADER_INX-EXCHG_RATE = 'X'.
GT_ORDER_HEADER_INX-CURRENCY = 'X'.
*****<<<<<<Communication Fields: Sales and Distribution Document Item>>>
GT_ORDER_ITEMS_IN-ITM_NUMBER = '000010'.
GT_ORDER_ITEMS_IN-MATERIAL = GT_FT_SALES-MATERIAL .
GT_ORDER_ITEMS_IN-PO_ITM_NO = '32'.
GT_ORDER_ITEMS_IN-CUST_MAT22 = 'AGNI-IV'.
GT_ORDER_ITEMS_IN-BILL_DATE = '20060808'.
GT_ORDER_ITEMS_IN-PLANT = '0001'.
*GT_ORDER_ITEMS_IN-STORE_LOC = '0001'.
GT_ORDER_ITEMS_IN-TARGET_QTY = GT_FT_SALES-TARGET_QTY . "'1000'
GT_ORDER_ITEMS_IN-ITEM_CATEG = GT_FT_SALES-ITEM_CATEG . "'TAN'
GT_ORDER_ITEMS_IN-MATL_GROUP = GT_FT_SALES-MATL_GROUP . "'01'
GT_ORDER_ITEMS_IN-PURCH_NO_C = GT_FT_SALES-PURCH_NO_C . "'32'
GT_ORDER_ITEMS_IN-SALES_DIST = GT_FT_SALES-SALES_DIST . "'000001'
GT_ORDER_ITEMS_IN-INCOTERMS1 = GT_FT_SALES-INCOTERMS1 . "'CFR'
GT_ORDER_ITEMS_IN-INCOTERMS2 = GT_FT_SALES-INCOTERMS2 . "'HAMBURG'
GT_ORDER_ITEMS_IN-PMNTTRMS = GT_FT_SALES-PMNTTRMS . "'0001'.
GT_ORDER_ITEMS_IN-EXCHG_RATE = GT_FT_SALES-EXCHG_RATE . "'1.00000'
GT_ORDER_ITEMS_IN-PRICE_DATE = GT_FT_SALES-PRICE_DATE . "'20060808'
*GT_ORDER_ITEMS_IN-SALES_UNIT = 'DZ'.
GT_ORDER_ITEMS_IN-TRG_QTY_NO = GT_FT_SALES-TRG_QTY_NO . "'23'
GT_ORDER_ITEMS_IN-DIVISION = GT_FT_SALES-DIVISION . "'01'
GT_ORDER_ITEMS_IN-SALQTYNUM = GT_FT_SALES-SALQTYNUM . "'32'
GT_ORDER_ITEMS_IN-GROSS_WGHT = GT_FT_SALES-GROSS_WGHT. " ' 25272000'
GT_ORDER_ITEMS_IN-NET_WEIGHT = GT_FT_SALES-NET_WEIGHT. "'24464000'
GT_ORDER_ITEMS_IN-UNTOF_WGHT = GT_FT_SALES-UNTOF_WGHT . " 'KG'
*GT_ORDER_ITEMS_IN-CURRENCY = 'EUR'.
APPEND GT_ORDER_ITEMS_IN.
****<<<<<<Communication Fields: Sales and Distribution Document Item>>>
GT_ORDER_ITEMS_INX-ITM_NUMBER = '000010'.
GT_ORDER_ITEMS_INX-MATERIAL = 'X'.
*GT_ORDER_ITEMS_INX-PO_ITM_NO = 'X'.
GT_ORDER_ITEMS_INX-CUST_MAT22 = 'X'.
GT_ORDER_ITEMS_INX-BILL_DATE = 'X'.
GT_ORDER_ITEMS_INX-PLANT = 'X'.
*GT_ORDER_ITEMS_INX-STORE_LOC = 'X'.
GT_ORDER_ITEMS_INX-TARGET_QTY = 'X'.
GT_ORDER_ITEMS_INX-ITEM_CATEG = 'X'.
GT_ORDER_ITEMS_INX-MATL_GROUP = 'X'.
GT_ORDER_ITEMS_INX-PURCH_NO_C = 'X'.
GT_ORDER_ITEMS_INX-SALES_DIST = 'X'.
GT_ORDER_ITEMS_INX-INCOTERMS1 = 'X'.
GT_ORDER_ITEMS_INX-INCOTERMS2 = 'X'.
GT_ORDER_ITEMS_INX-PMNTTRMS = 'X'.
GT_ORDER_ITEMS_INX-EXCHG_RATE = 'X'.
GT_ORDER_ITEMS_INX-PRICE_DATE = 'X'.
*GT_ORDER_ITEMS_INX-SALES_UNIT = 'X'.
GT_ORDER_ITEMS_INX-TRG_QTY_NO = 'X'.
GT_ORDER_ITEMS_INX-DIVISION = 'X'.
GT_ORDER_ITEMS_INX-SALQTYNUM = 'X'.
GT_ORDER_ITEMS_INX-GROSS_WGHT = 'X'.
GT_ORDER_ITEMS_INX-NET_WEIGHT = 'X'.
GT_ORDER_ITEMS_INX-UNTOF_WGHT = 'X'.
*GT_ORDER_ITEMS_IN-CURRENCY = 'x'.
APPEND GT_ORDER_ITEMS_INX.
*****<<<<<<Communications Fields: SD Document Partner: WWW
GT_ORDER_PARTNERS-PARTN_ROLE = 'WE'.
GT_ORDER_PARTNERS-PARTN_NUMB = '0000000057'.
***GT_ORDER_PARTNERS-ITM_NUMBER = GT_FT_SALES-ITM_NUMBER . " '000010'.
APPEND GT_ORDER_PARTNERS.
*********<<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
GT_ORDER_SCHEDULES_IN-ITM_NUMBER = GT_FT_SALES-ITM_NUMBER." '000010'
GT_ORDER_SCHEDULES_IN-REQ_QTY = GT_FT_SALES-REQ_QTY . "'234'
GT_ORDER_SCHEDULES_IN-DLV_DATE = GT_FT_SALES-DLV_DATE ." '20060824'.
GT_ORDER_SCHEDULES_IN-MS_DATE = GT_FT_SALES-MS_DATE . "'20060808'
GT_ORDER_SCHEDULES_IN-LOAD_DATE = GT_FT_SALES-LOAD_DATE. " '20060822'
GT_ORDER_SCHEDULES_IN-GI_DATE = GT_FT_SALES-GI_DATE . " '20060823'
GT_ORDER_SCHEDULES_IN-TP_DATE = GT_FT_SALES-TP_DATE . "'20060821'
APPEND gt_ORDER_SCHEDULES_IN.
*********<<<<Communications Fields: SD Document Partner: WWW FLAG>>>>>>>>>>>>>>>>>>
GT_ORDER_SCHEDULES_INX-ITM_NUMBER = '000010'.
GT_ORDER_SCHEDULES_INX-REQ_QTY = 'X'.
GT_ORDER_SCHEDULES_INX-DLV_DATE = 'X'.
GT_ORDER_SCHEDULES_INX-MS_DATE = 'X'.
GT_ORDER_SCHEDULES_INX-LOAD_DATE = 'X'.
GT_ORDER_SCHEDULES_INX-GI_DATE = 'X'.
GT_ORDER_SCHEDULES_INX-DLV_DATE = 'X'.
APPEND gt_ORDER_SCHEDULES_INX.
********Communication Fields for Maintaining Conditions in the Order
GT_ORDER_CONDITIONS_IN-ITM_NUMBER = GT_FT_SALES-ITM_NUMBER ." '000010'
APPEND GT_ORDER_CONDITIONS_IN.
***Communication Fields for Maintaining Conditions in the Order
GT_ORDER_CONDITIONS_INX-ITM_NUMBER = '000010'.
APPEND GT_ORDER_CONDITIONS_INX.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
SALESDOCUMENTIN =
ORDER_HEADER_IN = GT_ORDER_HEADER_IN
ORDER_HEADER_INX = GT_ORDER_HEADER_INX
SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '
IMPORTING
SALESDOCUMENT = GT_SALESDOCUMENT
TABLES
RETURN = GT_RETURN
ORDER_ITEMS_IN = GT_ORDER_ITEMS_IN
ORDER_ITEMS_INX = GT_ORDER_ITEMS_INX
ORDER_PARTNERS = GT_ORDER_PARTNERS
ORDER_SCHEDULES_IN = GT_ORDER_SCHEDULES_IN
ORDER_SCHEDULES_INX = GT_ORDER_SCHEDULES_INX
ORDER_CONDITIONS_IN = GT_ORDER_CONDITIONS_IN
ORDER_CONDITIONS_INX = GT_ORDER_CONDITIONS_INX
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =
IF GT_RETURN-TYPE EQ 'E' .
E_REC = E_REC + 1.
READ TABLE GT_RETURN WITH KEY ID = 'V1'.
FORMAT COLOR COL_NEGATIVE INVERSE ON.
REC_NO = E_REC + S_REC.
CONCATENATE TEXT-006 REC_NO ':'
GT_RETURN-MESSAGE INTO MSG SEPARATED BY SPACE .
CONDENSE MSG.
WRITE: / MSG.
FORMAT COLOR COL_NEGATIVE INVERSE OFF.
ELSEIF GT_RETURN-TYPE EQ 'S'.
S_REC = S_REC + 1.
FORMAT COLOR COL_POSITIVE INVERSE ON.
MSG = GT_RETURN-MESSAGE.
CONDENSE MSG.
WRITE: / MSG .
FORMAT COLOR COL_POSITIVE INVERSE OFF.
PERFORM COMMIT_MM.
ENDIF.
CLEAR: GT_RETURN[], MSG.
ENDFORM. " SLALE_UPLOAD_DATA
*& Form COMMIT_MM
text
--> p1 text
<-- p2 text
FORM COMMIT_MM .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = GT_RETURN.
clear: GT_ORDER_ITEMS_IN[],GT_ORDER_CONDITIONS_IN[].
ENDFORM. " COMMIT_MM -
Sales Order creation in R3 system using APO TLB functionality
Dear All,
Is there a way to create / trigger sales order creation in the R3 system using TLB shipments or using TLB functionality ?
Kindly describe the steps
Thanks
Sridhar RHi,
During the AC for the sales Order, the delivery date for the sales orders depends upon whether you are checking with Replinishment lead time or not.( Defined for the combination of checking group and Checking rule in Checking Scope)
The RLT is the time necessary to provide a material either by in-house production or by external procurement.
For external procurement, the replenishment lead time consists of the purchasing department processing time, planned delivery time, and goods receipt processing time and the ATP check only includes the planned delivery time.
1.If the replenishment lead time is taken into consideration,the availability is checked only for requirements within the replenishment lead time. Requirements outside the replenishment lead time are considered to be available as the system assumes that these materials can be provided by planning within the replenishment lead time.
2. If a requirement cannot be covered by receipts, the end of the replenishment lead time is the earliest date that the material can be confirmed.
3.If the replenishment lead time is not taken into consideration, the availability is checked for each requirement time without taking the replenishment lead time into consideration.
Thanks,
nandha
Maybe you are looking for
-
Replication Of Z Partner Functions from CRM to ECC
HI All, We are creating the " Z Partner Functions " in SAP CRM & ECC.in our scenario partner functions flows from CRM to ECC and we want to replicate these partner functions from CRM to ECC. So can some onle please tell me how to do this?. Thanks in
-
Download of saved views of an interactive report
Hi all When I am on a saved view of an interactive report and choose 'Download', I always get the data of the actual worksheet but not that form the saved report. Has anyone a solution of this problem? best regards Gerhild
-
2008 R2 RDS Device Cals Period
Hello! I have a question : Can i modify the grace period for the RDS Device Cals from 120 days to 1 or 2 days ? Thanks!
-
Has any one ever used Copysafe Pro by Artistscope with Flash ? I'm actually having issues with uploading my photo's to Flash after they have been copy protected by Copysafe Pro. I'm not sure if maybe I'm not saving them correctly or it maybe that Fla
-
HCM Process and Forms - Clarification required reg BADI QISR1.
Hi all, I want to have some extra validations done on some of the fields of my HCM Process Adobe form. For this, I created a new implementation for the BADI QISR1 with filter value as my Custom Scenario and implemented the method INT_SERVI