PLANNED V/S ACTUAL REPORT

Through MRP i got detailed list of planned orders in a period and actual production is different,which is simplest way to analyse to see plan vs actual report

Vikas,
You can use Shop floor information system. In this you could get the planned order qty. Along with that you will get the actuals against the planned.
Some of the transactions are MCP3, MCRE, MCP7, MCP1.
For cost comparison between actuals and planned use:
S_ALR_87013127
Hope this is useful.
Regards
Ram

Similar Messages

  • PS - Report on Planned v/s actual cost of the project

    Hi,
    I have a client requirement on the above subject. In Report S_ALR_87013542, Under actual cost the system is taking both the Revenue and Actual cost booked on the project. Is there any other report wherein the system shows only the actual cost booked on the project so that planned V/s Actual can be compared.
    Rgds,
    Prasad

    Hi,
    You can also refer the report S_ALR_87013543 - Actual/Plan/Variance Absolute/Variance %. This will give the reports based on cost elements. Morever plan cost Vs actual cost can be obtained from Project Infosystem report (CN41/ CNS41).
    In fact the report S_ALR_87013533 is a hiecherachical report for plan & actual cost of project.
    If the system is calculating wrongly both revenue & actual cost under actual then you need to check Cost elements asignments & value category details.
    Hope this will help you.
    Regards,
    Rakesh Pradhan

  • Order wise-Planned hours VS Actual Hours report

    Hi,
    Is there any report which shows me the Orderwise Planned Hours VS Actual hours.
    Regards
    SB

    SB,
    Have a look at TCode IW37N (Order/operation overview) and display the Work and Actual Work fields.
    You can probably use IW37 too..
    PeteA

  • Plan v/s actual materail consumption report for production order - urgent

    Dear all Hi,
    Is there any report or T code from which i can get the plan v/s actual material consumption for a production order or wbs element after completion of order, please suggest / help, the requirement is very urgent.
    thanks in advance

    Hi shaiz,
    You can get that in COOIS tcode
    Select components again List
    then give the plant,Order details
    execute
    You can find 2 fields reqmn qty(nothing but planned) & qty Withdrawn(Actual consumption) in the report
    Hope this hepls
    Rgds,
    SVP

  • Planned order Vs Actual Production report

    Hi Experts
    We are running MRP make to stock means we maintain PIR(MD61) in system. On the basis of PIR system create planned order and we declare production against these planned orders. I need a report which show the detail of planned order and actual production declare against that planned order. Please guide.
    Regards
    Parkash Chand

    Dear Parkash,
    second possible soluction could be create a custom report using this standard Bapi BAPI_MATERIAL_STOCK_REQ_LIST in order to read MRP element and to summarize the elements desired   (DELKZ field):
    MRP Ele Ind   Object
    PP     Planned independent requirement
    FE     Production order
    Pa     Planned order
    Third possible soluction setting in customizing the writing of the MRP table MDKP for header data and MDTB for item data and create a Query on these mrp table.
    Let me know if i've been useful for you.
    Daniele

  • Planned time  Vs Actual time report for activities

    How I can get 'Planned time  Vs Actual time report for activities( std values like setup , machine , labour  ) ' ?

    Hi,
       From the tcode co28  choose op/sub op
       Choose the profile as 000001and enter your order number
       Execute.
       Select the op and choose ALL FILEDS ICON.
       From there you can get the planned standard values and the actual standard
       values.
      Regards,
      nandha

  • PS: BAPI For Planned Progress and Actual Progress

    Dear All,
                  Is there any BAPI available for Planned Progress and Actual Progress for PS Project.
    Regards,
    Sohail

    Hi,
    Try using this report s_alr_87013532.
    Also for planned and actual progress the table is rpsqt. Could not find any bapi for the progress
    Regards
    Hiren K.Chitalia

  • Tcode for planned production  and actual production

    Hello,
    I am working with a report I want to check the values with R/3 for Planned Production and Actual production. Does anybody have any idea how to check?
    Thanks in advance

    Hey Suman,
    i have the same problem, did you find a solution?
    thanks

  • Line item actuals report for Profit center group

    I am looking for a Line Item Actuals report for a Profit Center Group  on the lines of KSB 1 report for Cost center /groups.
    I tried report "KE5Z but only profit centers can be selected, not profit center groups.
    Any help on this

    Try out the following report
    S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance
    Call up Actual line items, here we go you would get the profit center group reports in similar lines as KSB1.
    Award points so as to say thanks.
    Regards,
    Suraj

  • Planned Activity and Actual Activity Fields & relevenat table

    Hello,
        Can any one pls let me know the field and Table names for the following two fields (need for preperation of a report):
    PLANNED ACTIVITY: -  Production Order confirmation Planned Activity column
    ACTUAL ACTIVITY: -   Production Order confirmation Actaul Activity column
    thanks & regards
    Chaitanya Rayaprolu

    Hi,
    Procedure :
    go to the feild(Cursor in feild) press"F1" for help ( Pop up will appear )
    click on "technical help"( Icon with cross planting of hammers)
    from the small popup u can get Feild name and table or Struc.
    copy the feild name.
    go to Transaction "se16"(Tables) enter "DD03L" ( data base table ) and press enter.
    enter the feild name ( Copied earlier ) in feild name block and execute(F8) the table.
    You will see all the tables and structures containing the particular feild.
    This is the best solution to be self sufficient.
    please close the thread after testing the solution...and appreciate your reward.
    Prakash

  • IW32  needed Plan Cost and Actual Cost table name

    Hello ,
    In IW32 transaction Plan Cost and Actual cost in cost tab ---Table Name.
    Req: needed  plan cost & actual cost table names  for particular order number.( For New Report )
    Can you please let me know where Plan cost & actual cost get stored in IW32 in Cost tab ( table name / function module name ) or how its get calcualted for particular order number.
    Thanks in advance !
    Regards
    Rahul

    hi ,
    i too had same issue , i wrote following FS for that :
    Actual and planned cost  from PMCO-WRT00 to WRT12(the sum of values should be considered for actual as well as planned ) for  PMCO-OBJNR taken from CAUFV -OBJNR for order number  AFIH-AUFNR  and also currency from CAUFV-WAERS .
    Actual cost will have valuation type PMCO-WRTTP = 4 and planned cost will have valuation type  PMCO-WRTTP = 1 , which will be placed in different column
    hope this helps
    regards
    satish

  • Planned Values Missing from report S_PL0_86000029

    Planned Values Missing from report S_PL0_86000029, how to rectify this?
    Where to plug in the values?

    it's Plan actual comparison in the Profit and Loss Financial Statement.
    This Transaction Code is for Profit Loss Statement whereby the Planned values have to be seen.
    But one thing, I have also deleted the planned values from the General Ledger and Profitability Analysis.
    Need to get these Planned values. But from Where?
    Deleting GL Planned values - GLDE
    Deleting COPA values - KEDB
    This is what I have used.
    Edited by: Bhatia on Oct 9, 2008 8:16 PM

  • How can we give  the Budget figures/Plan figures for FSI3 report?

    Hi,
    My requirement is -
    1.We need the capability to produce P&L's and balance sheets by grouping various gl accounts.
    A.I am planning to do this by creating FSV's
    2.We also need to be able to input a budget into this "report writer" so it will automatically report variances, year to date numbers.
    A.For this i am planning to execute a report in FSI3 which gives plan and actual with variace.For this  i need to input budget/plan values for each GL Accounts.I dont know how to input Budget/plan values to this.
    kindly advice me.
    Thanks
    Supriya

    Hello,
    Please refer to my answer on your thread "  What is the use of transaction -FSE5N "
    I do not think it is possible to input budgets on GL Accounts in FI. Funds Management Experts can throw some light on this.
    You have to create a FORM in FSI4.
    Please refer some of the standard forms available in FSI5 or FSI6.
    Assign these forms to some reports in FSI1
    Refer some of the standard reports on GL available in FSI2 or FSI3.
    FDI1, FDI2, FDI3, FDI4, FDI5 and FDI6 transaction codes are relevant for Customers.
    FKI1, FKI2, FKI3, FKI4, FKI5 and FKI6 transaction codes are relevant for Vendors.
    Regards,
    Ravi

  • How can i check the planned data vs actual data

    How can i check the planned data vs actual data with the infocubes?

    Hi Srinivas,
    You create one cube for plan data and create another cube for actual data.
    Create a multiprovider and give comparision report. this is betterway.
    Or you can also load actual and plan data in one cube but you need to maintain one character like version to seperate atual and plan data.This is not a good work.
    Regards,
    Vijay.

  • How should i get plan poc and actual poc

    hi experts,
    in cne5,the plan poc and actual poc are all null,the  bcws and bcwp already get values(the same to my plan budage),the pocs should i maintain manual and where?
    i look to help http://help.sap.com/saphelp_47x200/helpdata/en/b4/ba853488601e33e10000009b38f83b/frameset.htm,there is a step said "Determine the progress of your project",how?
    best regards
    zlf

    Hi,
    Confirm activities of your project & then execute CNE1 for that period for that project, then those values will appear on CNE5 report.
    reg,
    Sam L

Maybe you are looking for