Planner to Calendar on the PCUI

Hello everyone,
                      This is Jack. I have all the plans, plan elements, campaigns and campaign elements created in the portal. Now when I have to save this hierarchy in a query and run the same query in the Marketing Calendar, I am unable to see the campaigns that are in the hierarchy.
Any help/suggestions?
Thank You
Jack

Russell,
            You can call me any which way you want :). Anyways coming to answering your question we made use of the SAP Notes that were available on the Service Marketplace.
The notes that you have to refer to are:
1. SAP Note 906318 and
2. SAP Note 919964
I found these notes and forwarded them to our CRM Techie and he took care of the rest like implementing this notes etc. I just happened to ping on him and he said that the 2nd one served our purpose.
All the best
Janaki

Similar Messages

  • Marketing Calendar on the PCUI

    Hello all,
                  We have this problem with the Marketing Calendar on the PCUI. When we click on the marketing plan/project in the calendar its not going in to the planner showing all the details about them. I don't understand what is the problem. Any help?
    Janaki

    Russell,
                You can call me any which way you want :). Anyways coming to answering your question we made use of the SAP Notes that were available on the Service Marketplace.
    The notes that you have to refer to are:
    1. SAP Note 906318 and
    2. SAP Note 919964
    I found these notes and forwarded them to our CRM Techie and he took care of the rest like implementing this notes etc. I just happened to ping on him and he said that the 2nd one served our purpose.
    All the best
    Janaki

  • Combining tabs in the PCUI

    Does anyone know how to combine the blocks of fields that are located in two tabs into one tab?  I'm trying to simplify the user interface by reducing the number of tabs that are used in the marketing planner.
    Here's an example:  I would like to take the data that is in the "status" tab and display it in the basic data tab in the PCUI.
    Any help would be appreciated.]
    thanks in advance.

    Hello Nima,
    Check the event in the tab page group for your second tab.
    Add this event to the multigroup of your first tab.
    Remove the event from the tab page group.
    You will get the second tab infos on the first tab.
    It is of course not possible to mix the fields of the first and second tab but you get them on the same page.
    In you case, the event of the status tab must be added to the multigroup MKT_PL_TAB_BASIC_M.
    Regards,
    Frederic

  • I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year.  Some how the birthday did not populate the photo calendar.  Is there a way to add the birthday iCal calendar into the calendar project?

    I created a birthday calendar to use in iphoto for calendar.  When a new calendar project is started each year, I click on it in.  Some how the birthday did not populate the photo calendar this year.  The photo calendar is almost complete.  Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

    Hi,
    If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
    Best wishes
    John M

  • How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
    I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    https://www.google.com/calendar/iphoneselect

  • I'm not able to create a iphoto calendar with the correct birthday entries.

    Hello,
    I use the latest Iphoto version and OS X 10.9.
    I tried to create a calendar in iphoto that includes all birthday information of my family. Unfortunately I'm not able to do this.
    I tried two differnt ways to get the information into the calendar.
    First of all I' tried to use the option of the calendar to get the information of my contacts and it partly worked. Some dates were missing and I was not able to modify or add additional birthdays in the calendar. I checked my contacts and the information was there but not shown in the Iphoto Calendar.
    Therefore I have to get the information into the calendar in a different way. For that I created a new calendar in ICal and created for each Birthday entries.
    I select the option in the Iphoto calendar to show the new calendar in iPhoto. But the result was worse than with the first solution. Only few entries was shown in the calender.
    Do anybody have an idea how can I solve this issue.
    Thank you in advanced,
    Philipp

    First of all I' tried to use the option of the calendar to get the information of my contacts and it partly worked. Some dates were missing and I was not able to modify or add additional birthdays in the calendar. I checked my contacts and the information was there but not shown in the Iphoto Calendar.
    Do the birthdays (from Contacts) show correctly in the Calendar app? Sometimes there is a formatting problem with the date string in the Contacts. If the Birthdays do not show correctly in the Calendar.app, try to delete them from Contacs and enter them again, and check, if they now are showing correctly in Calendar. Quit both Contacts and Calendar.
    Then restart iPhoto, and in the "Settings" for your Photo Calendar disable the Birthdays option, and then turn it on again.
    Any changes you do to the birthdays in Contacts may only appear in iPhoto Calendars after Calendar or Contacts wrote their databases, and iPhoto will read these databases, when you enable the "Birthdays" option. Toggling this option on and off will ensure, that the new Contacs info will be read.
    -- Léonie

  • To whom do I complain about the calendar on the iPad 2 with iOS 7? I can no longer read my appointments. Is there an adjustment I can make? Larger text size doesn't help.

    To whom do I complain about the OS 7 calendar on the iPad 2? I used to be able to read my appointments. The new small font is horrible. Text size doesn't seem to change it. Can I change it?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
     Cheers, Tom

  • I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent wit

    I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent with slightly different versions of the same address (see my previous post). Heating someone else's suggestion I created a workflow file to send an email and calling that file from an alert on my calendar. This is working and sends only one email to the client.
    My calendar is on I cloud and I access it from three different computers so I can keep my appointment calendar current. The files that send the email only exist on one computer. My other computers show error messages when those emails get sent. It seems that each computer wants to send the email. It's a small problem but is there a way that I could not get those alerts.
    But appreciate any thoughts about this. It seems like both problems might be related to the iCloud system.
    Thank you in advance,
    Michael

    Good work, catch so far Michael, does seem to be a "feature" of iCloud syncing, not sure what you could do to disable it.

  • We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help..

    We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help.

    Are you wanting to import iCal to the MacBook Air. Since iCloud doesn't work with 10.6 OSX you probably don't have any data in iCloud yet?

  • How do I display more than one month calendar in the day-view?

    iCal has always had a nice feature that allowed me to display little, what I call, mini-month calendars while in the day-view.  This allowed me to quickly jump to a day two or three (or more) months ahead (or behind) to check appointments on that day or set an appointment, without switching out of the day-view.
    The mini-month was a small clickable calendar that looked something like this:
    1   2   3   4   5   6   7
    8   9  10 11 12 13 14
    15 16 17 18 19 20 21
    22 23 24 25 26 27 28
    There was also a forward and backward arrow box [ < ][ > ] that allowed me to quickly scroll to the mini-month to find the day I wanted to click into.  And, if I wanted to give it more room by adjusting the frame, I could display up to three months at a time within my day view.
    Since upgrading iCal to 5.0 with the Lion upgrade, I can no longer display more than the current mini-month calendar on the day view.
    This is REALLY inconvenient.  Now, there is no way (that I know of) for me to stay in the day view and be able to jump ahead to a specific day two or three months out, or even to a day in the NEXT month without either going to the year view (a big waste of time) or click on the last day of the current month and then clicking the ">" day arrow to get to the next day which then shows that month's mini-calendar.
    How do I display more than the current month's mini-month calendar in the day view on Lion?

    Unfortunately you can't do what you want. Many people have complained to Apple about this. I suggest you provide Apple feedback directly at http://www.apple.com/feedback/macosx.html. They will not provide a direct response but hopefully if enough people provide feedback Apple will fix this.

  • Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, merge the calendars on the Iphone so there is only 1 calendar to sync?

    Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, alternatively, merge the calendars on the Iphone so there is only one calendar to sync?

    If the hard drive that crashed is the one that stored the itunes library, be sure to restore the library from Time Machine (mac) or whatever backup you use on windows.  That will get back your music.  I suspect that the replacement drive has an empty itunes library and thus, perhaps, the itunes match used that to sync to its servers.
    Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
    https://discussions.apple.com/community/itunes/itunes_match

  • Why doesn't ical add all of my google calendars on the same page?

    why doesnt ical add all of my google calendars on the same page.
    like in gmail, i have different calendars that all show up together on the same page.
    i see that they are there in ical when i click window. but the are not all see together on one page.

    If the box next to each calendar in the list is checked, it should show the contents of the calendars on the page. Unchecking the box hides the calendar.

  • How do I create a new calendar for the current year, using last years calendar's birthday's/photos and comments from the lower pages?

    Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe.  I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar.  How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!!  I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
    Thanks in advance. 
    Colin

    Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
    Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
    OT

  • Can I show multiple calendars at the same time, as you can  in Outlook

    I want to use the calendar for a service dept & show several calendars at the same time, vertically, for each person. Is this do-able?

    You can do a batch export by sending them to Adobe Media Encoder with the Queue button in the export settings dialog.
    However, you will have to set up each export one at a time.

  • How does iCal, or Calendar, order the display of multiple events for the same time?

    I can't for the life of me figure out how iCal orders the display of multiple items at the same time.  Does anyone have a clue?  It's not alphabetical.  It's not according the the order of the calendars in the left pane.  Is it just random?  Any help would be greatly appreciated.

    In the focus lost eventhandling start a thread which does
    the actual handling.
    the new thread waits for a little time (0.1 seconds)
    the click event of the button checks for a thread like the one above and tells it not to execute
    This way you execute the for the lost focus event only if
    the ok button isn't clicked in the same process ... not
    realy good, because it kind of relies on the ordering of threads ... but maybe it still works for you?

Maybe you are looking for

  • Whitespace removed in Content Conversion

    Hey! After content converting a flat file and running it through an xslt mapping, the java mapping need to find substrings within some fields. It turns out the fields are suppressed, meaning the whitespace before and after values are missing. Can thi

  • Constrain option in Dashboard prompt hurts performance

    I want to constrain the choices available for one prompt based on the value of the first prompt. Both of these values come from dim tables. If I don't have the constrain option checked, the values populate within seconds. With it checked, though it t

  • How can I delete a Note in iCloud on only 1 device?

    I have 3 devices on iCloud with Notes on - an ipad mini, an ipod touch and a macbook. I need to send my ipod in for a new battery and want to temporarily delete all my notes (some have passwords etc.) on it, but still leave them on the other 2 device

  • {Edited per forum guidelines} Need assistance NOW‏

    Best Buy I am appalled by the lack of empowerment your associates are given. After an hour of being told "no" by your in-store associates about a replacement phone which was approved for junk out replacement, I now have to deal with the product being

  • Run 3d games remotely (even behind a nat) with sound (Onlive DiY)

    D you know Onlive? Here is a DIY howto, this is what i'm using to play games remotely on a poor netbook Required packages: Server: virtualgl,ffmpeg,socat,sshd Client: virtualgl,mplayer,ssh,socat Server: in /etc/ssh/sshd_config: "AcceptEnv ALSA_CARD"