Planning 200  materials through SOP??

Hi Gurus,
I have 200 different products which needs to be planned through SOP and then the production plan should be transferred to demand management. I know an option is to plan through Flexible planning.
But i am not sure about Flexible planning and want an option without Flexible planning.
Please guide me in this issue. even i am ready for new development.( please guide me how to proceed)
Thanks in advance.
Naveen.a

Hi vivek,
Thanks for your reply.
My products cannot be mapped as product groups. as every product planning is sindependent irrespective of proportional factor.
Please suggest any new ways of uploading  sales values to SOP all at a time.
Thank you.
Naveen.

Similar Messages

  • How to send PR & PO data for materials through IDOC in XML

    Hi Experts,
    I am looking for a solution to send open PR & open PO related data for diffrent materials through as IDCO in XML file.
    Scenario is i have to show a report in a 3rd party system for open PR & open PR that too will come after selection some materials. That means select a materials & it will show all the open PO & related data in a report.
    The rough idea for the solution i got is I can save the data in XML file in the system. For this i have to send IDOC. but the problem is there is no message type for PR. IF i am not wrong i can extend the MATMAS05 for a segment that will have PR related info.
    Now what to do with that how to send the IDOC do i need to create another report to send IDOC or i can send the extended one through BD10. I tried it but it shows error message "0 communication idoc sent" so I dont no y such error is coming i think i am not filling the extended idoc. But again my QUestion is how to do that. If anyone have any other solution Please help me out of this.
    Regards,
    Nik

    Hi Alpesh,
    Thanks for your reply.
    My requirement is bit different. i have to send Open PR data for diffrent materials. In a 3rd party application user will search for few materials which will generate a report that will show the PR related data for those material.
    Same thing i have to do for PO & Sales order also.
    Can u please help me to provide the solution how can i proceed for it. U have given the Message type & a bapi how it will help in my issue?
    I got a suggesion from someone that extend message type matmas for PR, PO, SD related data & send the idoc. but i am confused how to pass that much data ina single IDOC.
    Regards,
    Nik

  • Quota arrangement in R/3 for APO generated planned order materials?

    Quota arrangement for the planned order materials generated from APO and when
    it is at the inbound side of R/3 while in CIF i.e.
    u2022 Once the Planned order is created in APO and when it is at the inbound side of R/3 while in CIF u2013 the system will first check in the table(EQUK) against the material and plant whether there is any valid u201CQuota arrangement numberu201D(EQUK-QUNUM) .
    u2022 Then from the table (EQUIP) against the u201CQuota arrangement numberu201D the system needs to calculate the percentage quota(from QUOTE field) of the material concerned against each production version.
    u2022 Finally the Planned order of the material needs to be converted into more than one Planned orders as per the production versions and in the ratio as mentioned in the quota arrangement.
    Actually Functionality exists today in R/3 whereby MRP will generate more than 1 planned order if production version quota arrangements exist. For example if via MEQ1 a quota arrangement exists to split requirements 60-40 between production version 1 and production version 2 then MRP will generate 2 planned orders using the 60-40 split.
    Does this still occur if APO generates the order materials and CIFs it to R/3?
    *I mean I had a requirement where APO generated planned orders to be split automatically and the correct PVs(Production version EQUP-VERID) to be assigned if quotas(EQUP-QUOTE) exist in R/3 side??*
    please help me asap this will b really appreciated and high points will be given....

    Quota arrangement for the planned order materials generated from APO and when
    it is at the inbound side of R/3 while in CIF i.e.
    u2022 Once the Planned order is created in APO and when it is at the inbound side of R/3 while in CIF u2013 the system will first check in the table(EQUK) against the material and plant whether there is any valid u201CQuota arrangement numberu201D(EQUK-QUNUM) .
    u2022 Then from the table (EQUIP) against the u201CQuota arrangement numberu201D the system needs to calculate the percentage quota(from QUOTE field) of the material concerned against each production version.
    u2022 Finally the Planned order of the material needs to be converted into more than one Planned orders as per the production versions and in the ratio as mentioned in the quota arrangement.
    Actually Functionality exists today in R/3 whereby MRP will generate more than 1 planned order if production version quota arrangements exist. For example if via MEQ1 a quota arrangement exists to split requirements 60-40 between production version 1 and production version 2 then MRP will generate 2 planned orders using the 60-40 split.
    Does this still occur if APO generates the order materials and CIFs it to R/3?
    *I mean I had a requirement where APO generated planned orders to be split automatically and the correct PVs(Production version EQUP-VERID) to be assigned if quotas(EQUP-QUOTE) exist in R/3 side??*
    please help me asap this will b really appreciated and high points will be given....

  • Can we redistribute SAP document materials through the web?

    Hi all,
    Is it legal to redistribute SAP document materials through the web?
    Thanks!

    Hi Christian,
    Thanks for replying. Just curious on this thing though, I have few SAP documents in .pdf format stating the following: (Can someone clarfy and help me about this? Thanks!)
    <b>Terms for Included Open Source Software</b>
    This SAP software contains also the third party open source software products listed below. Please note that for these third party products the following special terms and conditions shall apply.
    SAP License Agreement for STLport
    SAP License Agreement for STLport
    between
    SAP Aktiengesellschaft
    Systems, Applications, Products in Data Processing
    Neurottstrasse 16
    69190 Walldorf
    Germany
    ( hereinafter: SAP )
    and
    you
    ( hereinafter: Customer )
    1. Subject Matter of the Agreement
    a. SAP grants Customer a non-exclusive, non-transferable, royalty-free license to use the STLport.org C++ library (STLport) and its documentation without fee.
    b. By downloading, using, or copying STLport or any portion thereof Customer agrees to abide by the intellectual property laws, and to all of the terms and conditions of this Agreement.
    <b>c. The Customer may distribute binaries compiled with STLport (whether original or modified) without any royalties or restrictions.</b>
    d. Customer shall maintain the following copyright and permission notices on STLport sources and its documentation unchanged: Copyright 2001 SAP AG
    e. The Customer may distribute original or modified STLport sources, provided that:
    • The conditions indicated in the above permission notice are met;
    • The following copyright notices are retained when present, and conditions provided in accompanying permission notices are met:
    Copyright 1994 Hewlett-Packard Company
    Copyright 1996,97 Silicon Graphics Computer Systems, Inc.
    Copyright 1997 Moscow Center for SPARC Technology.
    Copyright 1999,2000 Boris Fomitchev
    Copyright 2001 SAP AG
    Permission to use, copy, modify, distribute and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. Hewlett-Packard Company makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty.
    Permission to use, copy, modify, distribute and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. Silicon Graphics makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty.
    Permission to use, copy, modify, distribute and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. Moscow Center for SPARC

  • Unable to delete Planning application created through EPMA

    Hi friends,
    Iam unable to delete the planning application created through EPMA.Tried logging in as admin still its not allowing.
    I tried in application view-> right click and delete.it will ask for all related info and when I say 'delete', the status is aborted.
    Can anyone tell whether we can delete an application created through EPMA. or is there a way to delete in backend.
    Regards.

    Hi,
    You could try and find more information from the logs, first change the level of logging for EPMA, it is set as standard to INFO and it is probably best changed to DEBUG.
    To do this
    Stop EPMA
    Go to the deployed Web application directory.
    For Tomcat, this is C:\Hyperion\deployments\Tomcat5\EPMAWebTier\webapps\awb\WEB-INF\conf.
    Open AWBLog4j.properties.
    Modify this line:
    log4j.logger.com.hyperion.awb=ERROR,logfile, stdout to log4j.logger.com.hyperion.awb=DEBUG ,logfile, stdout
    RESTART EPMA
    Then try and delete again and check to see if the logs have further information.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Mass reassign of inpsection plans to materials

    Dear Guru
    Kindly let me know how can be reassign inspection plans to materials in a collective basis.kindly give the tcode along with your comments.
    Thanks in advance
    Nithi

    To actually reassign the plans to new materials you'll need a tool like LSMW, an ABAP, or a third party tool like WinRunner.
    Craig

  • Create Inspection plan at once for many materials through QP01. Possible?

    Dear Friends,
    Is it possible to create Inspection Plant for more than one material at onece through QP01 when operation activity and Characteristics are same. I will change the Characteristics specifications afterwards.

    As suggested in earlier reply you can assign multiple materials to one inspection plan.
    But you may still need more than one plan because of
    1. UOM is maintained in Inspection plan header. So you have to create different inspection plan if you receive materials in different Unit of measures.
    2. Usage is also at header level, so depending on configuration, usage for 01 inspection type may be different from usage for 0101 inspection type.
    If you like the user exit approach.
    1. Create a dummy material and assign default inspection plan to this material.
    2. In the user exit change the inspection plan assignment.  Assign inspection plan from this dummy material.
    Form us this was a very useful approach during testing or for new material where inspection plan was not created in time.
    Once this default inspection plan is assigned, inspection lot is released even without inspection plan. If we need,  we can always change the default inspection plan in QA02 transaction before RR
    AK Marwadi.

  • Hyperion Planning Not Opening Through Workspace

    Hi ,
    We are facing problem in opening the EPMA planning application through workspace. After login into the workspace when we open planning application it is just getting hang and after so long time we get below message
    ===================================
    Loading the Module 'HyperionPlanning.planning' failed.
    The Operation was times out.
    ===================================
    Restarting the Hyperion services does not resolved the issue.
    We can login to the shared service , workspace and other Hyperion modules , however Hyperion Planning is not working.
    Could you please advice where would be the problem and How I should go ahead to resolve this issue
    Thanks ,

    Hi John ,
    Please find below log from HyS9Planning-sysout.log file
    =============================================================================================
    <06-Feb-2013 10:08:22 o'clock GMT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <06-Feb-2013 10:08:22 o'clock GMT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <06-Feb-2013 10:08:22 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
    <06-Feb-2013 10:08:30 o'clock GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
    <06-Feb-2013 10:08:35 o'clock GMT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
    <06-Feb-2013 10:08:35 o'clock GMT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
    <06-Feb-2013 10:08:35 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <06-Feb-2013 10:08:35 o'clock GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <06-Feb-2013 10:08:37 o'clock GMT> <Notice> <LoggingService> <BEA-320400> <The log file D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <06-Feb-2013 10:08:37 o'clock GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log00113. Log messages will continue to be logged in D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log.>
    <06-Feb-2013 10:08:37 o'clock GMT> <Notice> <Log Management> <BEA-170019> <The server log file D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log is opened. All server side log events will be written to this file.>
    <06-Feb-2013 10:09:03 o'clock GMT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <06-Feb-2013 10:09:13 o'clock GMT> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of Planning0 has been migrated to backup server and the backup server is accessing the TLOG of Planning0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
    <06-Feb-2013 10:09:14 o'clock GMT> <Notice> <LoggingService> <BEA-320400> <The log file D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <06-Feb-2013 10:09:14 o'clock GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\access.log00147. Log messages will continue to be logged in D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\access.log.>
    <06-Feb-2013 10:10:09 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <06-Feb-2013 10:10:09 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
    Calling getDomainConfiguration()
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
    Calling getRuntimeService()
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
    return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    return com.bea:Name=EPMSystem,Type=Domain
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
    Domain location is 'D:\Oracle\Middleware\user_projects\domains\EPMSystem'
    Calling getRuntimeService()
    return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@70bf97
    Checking D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\registry_update.xml file
    EPM_ORACLE_HOME: D:\Oracle\Middleware\EPMSystem11R1
    Template for PLANNING#11.1.2.0: D:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar
    Dependencies for D:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar: []
    BPMUI shared webapp not referenced from PLANNING#11.1.2.0
    Application name: PLANNING#11.1.2.0
    Application source: HyperionPlanning.ear
    Server name: Planning0
    Server port: 8300
    Server SSL port: 8343
    Application context: HyperionPlanning
    Registry product type: PLANNING_PRODUCT
    Registry physical web application type: PLANNING_WEBAPP
    weblogic.Name property is 'Planning0', seems to be WebLogic mode
    registry.isRegistryDatabaseCreated()true
    Registry was initialized sucessfully
    Executing pre custom update for PLANNING#11.1.2.0
    EPM_ORACLE_INSTANCE: D:\Oracle\Middleware\user_projects\epmsystem1
    Physical Web App found
    Web app already linked to some application server: false
    The registry was not modifyed because it already containse all sturctures
    Web app is already linked to the logical web app
    No needs to run custom updater for PLANNING#11.1.2.0
    loggingUpdatePLANNING.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
    Planning locale: en_GB
    <06-Feb-2013 10:11:25 o'clock GMT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
    <06-Feb-2013 10:11:25 o'clock GMT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Planning.>
    <06-Feb-2013 10:11:30 o'clock GMT> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    <06-Feb-2013 10:11:55 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <06-Feb-2013 10:11:55 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
    Version: V3
    Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
    Key: Sun RSA public key, 512 bits
    modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
    public exponent: 65537
    Validity: [From: Thu Mar 21 20:12:27 GMT 2002,
                   To: Tue Mar 22 20:12:27 GMT 2022]
    Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
    Key_CertSign
    Algorithm: [MD5withRSA]
    Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 127.0.0.1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.94.154.47:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 0:0:0:0:0:0:0:1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.96.172.50:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.94.154.47:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 10.96.172.50:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "Planning0" for domain "EPMSystem" running in Production Mode>
    <06-Feb-2013 10:12:01 o'clock GMT> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
    <06-Feb-2013 10:12:01 o'clock GMT> <Warning> <Server> <BEA-002611> <Hostname "BRWBBPBPU.integration.net", maps to multiple IP addresses: 10.94.154.47, 10.96.172.50, 0:0:0:0:0:0:0:1>
    <06-Feb-2013 10:12:07 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <06-Feb-2013 10:12:07 o'clock GMT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    using java.library.path: D:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64;D:\Oracle\Middleware\EPMSystem11R1/bin;D:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC-64/11.1.2.0/bin;D:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;D:\Oracle\MIDDLE~1\JROCKI~1\jre\bin;D:\Oracle\MIDDLE~1\JROCKI~1\bin;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8
    EPM_ORACLE_HOME (D:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "EPM_ORACLE_HOME".
    using Java property for Hyperion Home D:\Oracle\Middleware\EPMSystem11R1
    ========================================================================================================
    Edited by: 946582 on 6 Feb, 2013 10:47 PM

  • Planning data changes through CJR2  transcation

    Dear all,
    Kinldy let me know how to track changes made in my financial planning through CJR2 . because f these changes , my project planned datas are changed and gross margin reduced.
    I wish to know, is it possible to track the changes made using CJR2 transcation ?  like , when , what and which WBS changed .
    i tried CJI4 but no result .
    Appericiated your help as usual,

    Thanks for your reply  , But my concern is not to get the old value there , I have a hardcopy to serve that purpose, but I really want to know who did it ?  Like user name , time , which WBS got changed . I have tried CJI4 to capture this changes , but I am not getting any values under CJI4.  Is there any other transaction available  to track this changes ?
    Eg. For sales order , any time will get a change report on line by line , I am looking something similar to that .

  • Demand Management Through SOP

    Hello Everyone,
    I have a scenario where I receive an 8 week rolling forecast from marketing. This is transferred to production. 2 weeks before actual production the plan is firmed.
    I was hoping to implement this using SOP transfer to demand management. I was also planning to use an MRP type with a planning time fence. But am not exactly sure of the best practice to transfer Rough cut plann data to demand management. Do I directly transfer the Rough cut plan to a "requirements plan" version?
    If not what would be the best possible solution to run SOP?
    Also Please suggest as to any specific configuration settings to be maintained for SOP.
    Any help in this regard would be greatly appreciated.
    Sincerely,
    Aji Kurian Mani

    Hi
    It depends on at which aggregation level you are receiving the Forecast.
    if you are receiving at Plant -Material level. I would advice you to directly upload in to MD61.
    SOP is required, if you need to do any forecasting in SAP.
    or if you need to publish , analsyse the Historical and Forecasting Values at diffrent Org Levels(Plant, cutomer, Material,Sales org....etc)
    using the planning tables you can maintain the Figures at one Level, which gets aggregated automatically.
    Regards
    Ratan

  • ERROR WHEN RUNNING B.D.C FOR ASSIGN OF INSPECTION PLAN TO MATERIALS

    HI GURUS,
    WHEN I RUN B.D.C TO ASSIGN INSPECTION PLAN TO MATERIAL
    I AM GETTING THE FOLLOWING ERROR.
    Error occurred when checking type  group .
    Message no. CP852
    Diagnosis
    Errors occurred when checking the routing.
    Procedure
    u2022     If the check occurred online, display the checking log and remove the causes for the errors.
    u2022     If you saved the routing, call it up again and check it online.  Display the checking log and remove the causes for the errors.
    +NOTE: THIS INSPECTION PLAN WE HAVE ASSIGN MULTIPLE+ M.I.Cs WHICH ARE SIMILAR E.g.
    CHARA180:SMS,
    CHARA:190:SMS;
    CHARA:200:HRM:
    CHARA:210;HRM
    WHEN WE RUN COPY MODULE B.D.C.WE ARE GETTING ABOVE ERROR.
    REGARDS
    AMIT

    Hi Atul,
    WHEN WE DELETE THE REPEATED M.I.Cs AND ONLY RUN THE B.D.C WITH 16 CHARACTERISTICS WHICH ARE NOT REPEATED. THE PROGRAM/RECORDING RUN SUCCESSFULLY.
    AS SOON ADDED THE M.I.CS WHICH REPEATED IN CHARA:170,CHARA:180;CHARA;190;CHARA;200;CHARA;210;CHARA220.
    WE ARE NOT ABLE TO SAVE THE RECORDING AND WE GET ABOVE ERROR.
    MY ABAPER IS SAYING ITS A FUNCTIONAL ERROR.
    REGARDS
    AMIT

  • Planning and Drill Through Reports

    Hi all.
    I have a planning application and want to build drill through reports (Planning v11.1.1.3)
    I wanted to know is it possible to use an already existing cube in essbase to create drill through reports.
    Please let me know in case you have any suggestions or best practice on this.
    Thanks!

    Would you believe John Goodwin has a blog post about this? :)
    http://john-goodwin.blogspot.com/2008/07/planning-v11-drill-back.html
    Regards,
    Cameron Lackpour

  • They eliminated our friends and family plan half-way through the contract without even telling me!!!

    Whatever you do get it in writing, and even then, don't believe it! We switched to a 700 minute plan over a year ago and were told it included 10 friends and family numbers. My Verizon two months ago showed us over our minutes so I went in and updated our friends and family numbers to fix the problem. Last month everything was fine. This month it showed us over our minutes again but when I went in it said we weren't on the friends and family plan! I went to the store to figure out what was going on and they said we were never supposed to be on the friends and family plan. We have been on it for over a year now which can easily be seen in our records and it was sold to us that way. That's what we agreed to pay for. Their solution? Take care of overage fees for this month and give us 5 friends and family numbers for the remainder of the contract and that's after arguing for an hour. I'm disgusted with the dishonesty and Verizon will be losing our business when our contracts are up. To add insult to injury when I started discussing the problem with the clerk, she stopped me half way holding up her finger and went to sell something to a customer that had come in three minutes after me. She actually rang him up before finishing dealing with me to get her commission!!!!! RIDICULOUS!!!!! I'm done with this crappy company. We pay out the nose and regardless of how good the network may be, it's just not worth it. They tried to make it sound like they were doing us some grand favor by offering to upgrading us to a 1400 min per month plan at full price so we could get friends and family back! No thank you!!! We already had it!!!! Absolutely unethical. Now to add icing to the cake, I read that they are doing away with the unlimited wireless broadband plan that I was grandfathered in on. Yep, we are SO gone. What a dishonest way to run a company!!!!!!!! Buyer beware!!!!

    And just to note, they have slowed down our internet speeds to the point of making them nearly impossible to use so just one more reason to be gone. Oh and did I mention that unless you have a data plan on your phone, to upgrade your phone is actually a downgrade this year??? The phones they are offering for talk and text customers are ridiculous! I went through the joy of trying to upgrade my phone and used my verizon a few months back. While in the process I clicked "only show options that are compatible with my current plan" to save time. I spent hours going through the phones and picked out a great one. When I went to check out it said that phone was not compatible with my current plan. Seriously???? I called and they said no smart phones were compatible. Great! But your website needs fixed and you just wasted hours of my life!!! Went back to look at the other phones that were offered that weren't smart phones and they were AWFUL! I really do hope a LARGE number of customers leave Verizon to show them that consumers won't put up with this kind of treatment!!

  • Exporting Slideshows as quicktime movie, i plan 200 or more pics..

    I tested it exporting a slideshow that only had 5 pics..i put 10 secnods for each slide. And it took a while to export.
    I can't imagine how long it would take with 200 or 300 pics or more.. Can it do it eventually ( if i wait long) or will it crash my system?
    I'm doing a slideshow of a story.

    jonsondonson:
    Welcome to the Apple Discussions. As Terence mentioned give us some information about your setup, system version, RAM, HD free space, iPhoto version, QT version, etc., and the ultimate use of the slideshow.
    Do you plan to put the slideshow into iDVD for burning and playing thru a TV set? Do you have music and use the KB effect? There are several ways to go about it and more information can help us answer your question more effectively.
    Hi all:) Thanks for your answers. yes i forgot about my system:
    I have a G5 tower 1.8Gzh single processor.
    2GB ram. Diskspace is less than 1GB... but i have one 20GB External HD which sadly it's also full.. But i guess i can make space in the mac HD by throwing stuff i don't need.
    Quicktime 7.1.3
    I'll use Toast or IDVD to make the dvd.
    But i hope it wouldn't take a lot just for a simple picture Slideshow.
    My slideshow will be kind of like a story .. With Narration, music, sound efects.
    How i plan to do it is: Render the images from my graphics program( Poser and Vue). , Take images to iPhoto and create a slideshow.. Set the transitions type and the seconds for the slides to stay on screen. Apply al lneeded settings in iphoto. Export as movie. Take movie to GarageBand OR if i had Logic Express( which i kind of plan to get), then logic express. Add sound tracks and narration and sound effects to movie. Export to quicktime.
    That's it .

  • If I'm paying for the Photography Plan, can I upgrade to the full plan half way through?

    So I'd like to have the entire Adobe package at some point this year once I have more video work coming in. But for now, i only have photography work booked for the next few months, and obviously I need Ps & Lr minimum. I'm thinking of paying monthly for the photography plan. then half way through, changing it to the full Creative Suite. Is this possible?
    Thanks

    Upgrade single to all Cloud http://forums.adobe.com/thread/1235382 may help

Maybe you are looking for