Planning a migration from Exchange 2010 to Exchange 2013

Hello,
I am planning a migration from Exchange 2010 to Exchange 2013 and I was wondering if there was a good guide on the UM migration. I haven't found one that isn't confusing as heck.

Hello,
Is there any update?
If
you have any feedback on our support, please click here
Cara Chen
TechNet Community Support

Similar Messages

After Migrating from Sharpoint 2010 to Sharepoint 2013 list filter options changed

Hi All,
After migrating from SP 2010 to SP2013 i found list View filter option is changed and filter is not working Pls help its really urgent.... you can check field 1 and field 2 in following screen shot.
Prasad kambar

Hi ,
According to your description, my understanding is that your list filter cannot work after Migrating from SharePoint 2010 to SharePoint 2013.
For your issue, please check your log files for any issues. Also you can refer to the blogs for troubleshooting SharePoint 2013 migration:
Firstly try running Test-SPContentDatabase on your source database for any issues -
Test-SPContentDatabase - http://technet.microsoft.com/en-us/library/ff607941.aspx
Troubleshoot site collection upgrade issues in SharePoint 2013 http://technet.microsoft.com/en-us/library/jj219648.aspx
Verify database upgrades in SharePoint 2013 -http://technet.microsoft.com/en-us/library/cc424972.aspx
And please have a look at your custom solution on your site.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Migrating from SP 2010 to SP 2013

I m new to sharepoint and our new project requirement is to migrate the contents from SP 2010 to SP 2013. we r not going to use any tools , so if we go manually what would be the approach to migrate the custom data to the next version. there is lot of custom
data like features, event recievers, webparts that we have to take care of . do we have to code them again or what .
in depth reply or even some forums link will do . thanks

Check out
http://www.falconitservices.com/support/KB/Lists/Posts/Post.aspx?ID=124
All customizations will have to be tested again though, you can't expect them to work correctly. I would start by creating a list of customizations that have to be upgraded and still need to be supported
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Change GUIDs when migrating from SP 2010 to SP 2013?

When migrating custom list schema from SP 2010 to SP 2013, do I need to change the GUIDs for all the fields or can I use them as is?
Thank you!

Hi,
After migrating SharePoint 2010 to SharePoint 2013, all the GUIDs of the sites and lists would change.
If you just wanted to use the list in the site, it would have no impact on the lists, all the custom lists would work well.
However, if you have some functions or solutions based on the GUIDs of the lists, you should change all the GUIDs for all the solutions.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

QuickEdit disabled after migration from SP 2010 to SP 2013

Hi,
I have a custom list. In SP 2010, I was able to use the Datasheet view to enter multiple data. I migrated the site to SP 2013, and the custom list, the Quick Edit is disabled.
I recreated a Datasheet view, but still it is not showing.
How to enable the Quick edit mode?
Thanks

Hi Venkatzeus,
You may try below steps.
Use or create a view that uses the Default view style for the list. To edit the selected view, follow these steps:
On the affected list, click the LIBRARY tab on the ribbon, and then click Modify View.
In the Style section of the Edit View page, click
Default, and then click OK.
OR
Go to the list settings> Advanced settings page
Scroll down and Under quick edit options just choose "Yes" and then click OK.
Let me know if it works for you.
Regards,
Amol

Trouble with publishing topology. Migration from Lync 2010 standard to 2013 standard.

Hi,
I have a problem with "Microsoft.Rtc.Applications.Testbot". When I publish the topology I receive an error, I've found many solutions to my problem. One of the best descriptions
I've found here: http://lyncme.co.uk/microsoft-lync-server-2013/unable-to-publish-topology-a-trusted-server-with-the-type-mcxinternal-and-fully-qualified-domain-name-fqdn/
I'm going to do the same method, but I do not understand whether I should remove both entries or only one. If I delete the record 2010, will the 2010 lync continue to work?

Hi Alan,
Lync is not that dependent on what is stored in Active Directory, and the topology builder should recreate any missing entries when it is rerun. I don’t think this operation is a high risk
for the deployment as a whole, but do be careful when using ADSI edit, it’s all at your own risk.
Here’s a similar case for your reference.
https://social.technet.microsoft.com/Forums/lync/en-US/01404c0c-ba63-4471-a5b2-8e110be451e3/lync-server-2013-topology-builder-errors-global-activation-?forum=lyncdeploy
Hope it can be helpful.
Best regards,
Eric

User migration from Lync 2010 to Lync 2013

We have Lync 2013 pool co-existence with Lync 2010 pool. Need to move users based on their AD Group membership. In a particular AD group, only few of the users are enabled for LYNC 2010, not all users. How to get the list of only Lync enabled users in AD
group and move them on to Lync 2013 by PowerShell script?
Thanks in advance for your help
Tek-Nerd

When I ran the below command
Get-ADGroupMember Mygroup | where {$_.msRTCSIP-UserEnabled -eq "true"}
on my Lync 2013 server, got the below error message...
At line:1 char:46
+ Get-ADGroupMember MyGroup | where {$_.msRTCSIP-UserEnabled -eq "true"}
+
~~~~~~~~~~~~
Unexpected token '-UserEnabled' in expression or statement.
At line:1 char:59
+ Get-ADGroupMember MyGroup | where {$_.msRTCSIP-UserEnabled -eq "true"}
+
~~~
Unexpected token '-eq' in expression or statement.
    + CategoryInfo          : ParserError: (:) [], ParentContainsErrorRecordExcep
    + FullyQualifiedErrorId : UnexpectedToken
Tek-Nerd

Exchange 2010 to Exchange 2013 Migration and Architect a resilient and high availability exchange setup

Hi,
I currently have a single Exchange 2010 Server that has all the roles supporting about 500 users. I plan to upgrade to 2013 and move to a four server HA Exchange setup (a CAS array with 2 Server as CAS servers and one DAG with 2 mailbox Servers). My
goal is to plan out the transition in steps with no downtime. Email is most critical with my company.
Exchange 2010 is running SP3 on a Windows Server 2010 and a Separate Server as archive. In the new setup, rather than having a separate server for archiving, I am just going to put that on a separate partition.
Here is what I have planned so far.
1. Build out four Servers. 2 CAS and 2 Mailbox Servers. Mailbox Servers have 4 partitions each. One for OS. Second for DB. Third for Logs and Fourth for Archives.
2. Prepare AD for exchange 2013.
3. Install Exchange roles. CAS on two servers and mailbox on 2 servers. Add a DAG. Someone had suggested to me to use an odd number so 3 or 5. Is that a requirement?
4. I am using a third party load balancer for CAS array instead of NLB so I will be setting up that.
5. Do post install to ready up the new CAS. While doing this, can i use the same parameters as assigned on exchange 2010 like can i use the webmail URL for outlook anywhere, OAB etc.
6. Once this is done. I plan to move a few mailboxes as test to the new mailbox servers or DAG.
7. Testing outlook setups on new servers. inbound and outbound email tests.
once this is done, I can migrate over and point all my MX records to the new servers.
Please let me know your thoughts and what am I missing. I like to solidify a flowchart of all steps that I need to do before I start the migration.
thank you for your help in advance

Hi,
okay, you can use 4 virtual servers. But there is no need to deploy dedicated server roles (CAS + MBX). It is better to deploy multi-role Exchange servers, also virtual! You could install 2 multi-role servers and if the company growths, install another multi-role,
and so on. It's much more simpler, better and less expensive.
CAS-Array is only an Active Directory object, nothing more. The load balancer controls the sessions on which CAS the user will terminate. You can read more at
http://blogs.technet.com/b/exchange/archive/2014/03/05/load-balancing-in-exchange-2013.aspx Also there is no session affinity required.
First, build the complete Exchange 2013 architecture. High availability for your data is a DAG and for your CAS you use a load balancer.
On channel 9 there is many stuff from MEC:
http://channel9.msdn.com/search?term=exchange+2013
Migration:
http://geekswithblogs.net/marcde/archive/2013/08/02/migrating-from-microsoft-exchange-2010-to-exchange-2013.aspx
Additional informations:
http://exchangeserverpro.com/upgrading-to-exchange-server-2013/
Hope this helps :-)

Exchange 2013 - can no longer move mailboxes from Exchange 2010 to Ex 2013.

Migrating to Exchange 2013 from Exchange 2010. Created Ex 2013, moved some mailboxes OK. Then could no longer move mailboxes. No errors. The Migration email says complete. Synced: none, Total Mailboxes: none.
Tried several mailboxes. Same result.
Ex 2010 is SP3 RU6, (at least it says RU6 is installed in Programs/Features. The build is for SP3 w/o RU6???)
Ex 2013 is SP1 aka CU4.
How to proceed???
john11

After many attempts to fix the issue (move remaining 4 mailboxes from Exchange 2010 to Exchange 2013) I contacted Microsoft and we resolved the issue. Here's how.
btw - Thanks for the suggestions from Ed. However, they did not seem to move us forward.
What did work:
1. On the Exchange 2010 box, create a new database. (Someone else suggested this also). Then move the remaining Exchange 2010 mailboxes to this new db. Then after that, move the 4 mailboxes to Exchange 2013 using the GUI on Ex 2013. This only worked for one
of the four mailboxes. The other 3 failed.
2. Apparently, we need to restart the Microsoft Exchange Mailbox Replication service on the Exchange 2013 after several failed move attempts to clear cache related to the moves.
3. Then on the Exchange 2013 box, use this Exchange shell command:
New-MoveRequest -identity "[email protected]" -TargetDatabase "Exchange 2013 DB name" -BadItemLimit '500' -verbose
This moved the remaining 3 mailboxes including the Discovery mailbox. It took some time. But we could check the progress using
Get-MoveRequest
The MS Tech was terrific. Really knew his stuff. And all mailboxes are on Exchange 2013. Well, the last one is still moving, but I am optimistic.
Thanks for the suggestions. I had to get this done and the MS Tech made that happen.
john11

Copy UM settings and prompts from Exchange 2010 to Exchange Online

When I migrated UM from Exchange 2007 to Exchange 2010, there is a script called "MigrateUMCustomPrompts.ps1"
that would copy over all the customized greeting files.
We are now migrating from Exchange 2010 to Exchange Online and will be using Exchange Online UM. Is there a similar script to copy over the files just like
the on-prem?

Sorry, I don't share code examples in most cases because they're generally one-off customer-specific scripts and I'm not in a position to answer lots of follow-up questions about them.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Migrate from Server 2003 (no Exchange, single server) to SBS 2011

Are there any Technets or other Microsoft documentation on migrating from Server 2003 (no Exchange, single server) to SBS 2011? I understand it is possible, but I would like confirmation and some documentation before purchasing the appropriate hardware
and licenses.
Thanks,
Doug
Doug Orr

Hi Doug,
In general, the migration is the similar with migrating process from SBS 2003. In addition, also have main
difference.
“The main difference is that you don’t have to remove the source and that you have to follow the migration
instructions as the SBS migration wizard will not launch.”
You can get above description from following similar thread. Please refer to.
Migrate from Windows Server Standard 2003 (not SBS) to SBS 2011
http://social.technet.microsoft.com/Forums/en-US/68790e41-b833-4e81-8200-63852ab9e196/migrate-from-windows-server-standard-2003-not-sbs-to-sbs-2011?forum=smallbusinessserver
Meanwhile, please refer to the following article. It may be helpful.
Step By Step Guide To Migrating To SBS 2011
http://www.techieshelp.com/step-by-step-guide-to-migrating-to-sbs-2011/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
However, as Robert suggests, would you please confirm specific version of SBS? It may help us to understand
clearly and provide correct information.
Hope this helps.
Best regards,
Justin Gu

Moving from Exchange 2010 to Exchange Online: AD issue

Dear All,
Our company will moving from Exchange 2010 to Exchange Online and we have a on-premise WinSer 2008R2 for AD.
Currently, user have to login to our domain and use the same ID and PW to access their outlook.
1.If we move to Exchange online, do we have to do anything with our on-premise AD server?
2.If user prefer using only one ID and PW for PC to access domain and Exchange online, what should we do?
3.Is there any point or do we still need current on-premise AD server after we moved to Exchange Online?
Thank you so much for your attention and help!
Best regards,
Shiloh

Hi,
There are a lot of corrupted items. You can try raising the baditemlimit to 999 to workaround this issue
Get-PublicFolderMigrationRequest | Set-PublicFolderMigrationRequest -baditemlimit 100
To resumed the PublicFolderMigrationRequest
Get-PublicFolderMigrationRequest | Resume-PublicFolderMigrationRequest
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Simon Wu
TechNet Community Support

OST corrupt when moving Mailbox from Exchange 2010 to Exchange 2010

Anyone come across this?
Moving a mailbox on Exchange 2010 to Exchange 2013 - the outlook client wont connect, if you remove the OST and allow outlook to recreate it comes good again.
outlook client knows the mailbox has moved as it connects to the new server
Not happening to every mailbox
thak=nks

Hi,
After you move mailbox from Exchange 2010 to Exchange 2013, Outlook should still work.
Is there any error message when these affected users try to connect? If there is, please post here for further analysis.
I saw someone failed to connect to the new Exchange server after they moved mailbox, then they restarted the Microsoft Exchange Information Store service and restarted Outlook, it worked.
If you haven't tried this, you can restart the Microsoft Exchange Information Store service to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Migration from Lotus Domino to Exchange 2013

Hi,
I need to migrate from Lotus Domino 8.5.3 to Exchange 2013, there's a tool to do it?
Kid Regards

Smart way to perform migration from Lotus Domino to Exchange 2013 is only Mail Migration Wizard software. That is affordable in cost and times saving at all just grabs it for excellent server migration.
Visit for for more info: http://www.exportnotes.com/domino-to-exchange-server.html

Comparing-the-differences-between-anti-spam-agents-from-exchange-2010-to-exchange-2013

http://social.technet.microsoft.com/wiki/contents/articles/23582.comparing-the-differences-between-antispam-agents-from-exchange-2010-to-exchange-2013.aspx
Sathish

Hello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Planning a migration from Exchange 2010 to Exchange 2013

Similar Messages

Maybe you are looking for