Planning a process chain from 2 to 15 every month

Dear Gurus,
I have created a process chain but I must plan it daily from day 2 to day 15 every month. If I check the period values to plan it I can just select: daily, weekly, monthly... but I need it to be daily but just those days.
Can anybody help me with it?
Many thanks!
Regards,
Jordi

Hi,
You can do it by using simple programs/events.
See some usefull Blogs/Articles/Wiki in the following URL..
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Triggering  the Process Chains at Particular Date using Events
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/triggering%20%20the%20process%20chains%20at%20particular%20date%20using%20events.pdf
BI-ABAP (Trigger Process Chains on evry month 3rd and 4th day).
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=81428842 
How to trigger the Process Chains in BW from ECC
/people/surendrakumarreddy.koduru/blog/2009/03/18/how-to-trigger-the-process-chains-in-bw-from-ecc
Thanks
Reddy

Similar Messages

  • Removing process chain from schedule

    Hi Gurus
    I have a very basic question, under what circumstances do we take a process chain out of schedule? Till now i was being asked to make occasional changes in Process chains and then revert them back later,i did this activity of changing(adding or removing processes) after removing process chain from schedule( i was asked to do that)...
    Now i need to edit recipient list(add one recipient's name ) in alll the process chains where success and error messages are present.
    I want to know whether i need to remove the chain from schedule before starting with this activity.
    If one chain contains multipe individual chains and every individual chain contains messages,do i need to remove every chain from schedule and edit the recipient list....or this is not required and i can simply open individual chain containing messsages in edit mode and edit the recipient list and save the changes and follow the same for all chains?
    kindly help.

    Hi,
    We would normally be asked to remove the process chains from schedule during any upgrade activities. or it can also be related to any particular flow - this is in case particular process chains are asked to be removed from schedule. This may be due to adding an intermediate step in between the flow or any such scenario.
    And you can change the recipient list when the process chain is running also, because here you will not actually be editing the process chain but will be editing the "message" object. just click "edit message", save the message and come out, do not click save when you are in the process chain maintenance screen.
    Hope this helps.
    Regards,
    Joe

  • Is there any way to execute process chain from the portal?

    Hello,
    Is there any way to execute process chain from the portal? I dont want to link process chain with any of report. I want to have a button in some of portal folders. User presses the button and it executes the process chain.
    I was thinking about to create a fake planning cube, aggregation level and planning function. I call FM within the Fox planning function that runs the process chain. But it should be done within the report.
    Any ideas?
    Thanks a lot in advance!

    Hi.
    I want to have a button in some of portal folders
    You mean that you want to use some link in EP ?
    Regards.

  • Is it possible to run process chain from the certain process/point?

    Hello
    Is it possible to run process chain from the certain process?
    How?
    Thanks

    Hello,
    yes it possible! use the following steps.
    1. Goto the process which you want the chain to start from.Goto display messages>> Chain tab. In the generated instance note the variant and instance.
    2. Goto table RSPROCESSLOG and give variant and instance and get logid details.
    3. t codese37>> run FM RSPROCESSFINISH.
    4. give the deatils u have got in RSPROCESSLOG table here and say execute.
    This will solve ur problem.
    Hope this helps!
    Reg
    Deepmala

  • How to move the process chain from Unassigned node to a new node in 3.5?

    Hi all,
    I have created a new process chain in the development and it is falling under the Unassigned nodes. I want to move that process chain to an another node. but i am unable to do that
    Can anyone let me know how to move the process chain from unassigned node. I have drag and dropped but still the same in BW 3.5 ?
    Thanks
    Poooja

    Hello,
    Try this....
    Double click on your process chain. Via the menu select:
    Process chain > Attributes > Display components
    Select F4 (possible entries)
    At the bottom of the window you will find a create icon
    to make your own component.
    After you created it, assign it to your process chain.
    Don't forget to save the process chain.
    Regards,
    Sivaram

  • Restarting Process chain from the middle

    Hi all, I have a question about process chain in BW7.0.
    When the error has occured in the process chain, is there any way to restart the process chain from where the error has occured?
    One of the way I came up with was to set the process type into Repairable from Repeatable,but when I try to change the status,the warning message shows up and I can't change it.
    Is this the right idea,or is there any other way to do it?
    Can any one tell me?
    Thanks in Advance,
    Hiroshi Iwanaga

    First of all, find out the rootcause of the failure of the process step that failed and finish it manually. Then, go to the process chain...
    Open the messages of a failed step by right clicking on it and selecting 'display messages'.
    In the opened popup click on the tab 'Chain'.
    In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
    1. copy the variant from the popup to the variante of table rspcprocesslog
    2. copy the instance from the popup to the instance of table rspcprocesslog
    3. copy the start date from the popup to the batchdate of table rspcprocesslog
    Press F8 to display the entries of table rspcprocesslog.
    Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
    Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
    1. rspcprocesslog-log_id -> i_logid
    2. rspcprocesslog-type -> i_type
    3. rspcprocesslog-variante -> i_variant
    4. rspcprocesslog-instance -> i_instance
    5. enter 'G' for parameter i_state (sets the status to green).
    Now press F8 to run the fm.
    Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
    Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
    Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
    Assigning points is the way of saying thanks in SDN.

  • Trigger process chains from UNIX

    Hi,
    I just wanted to know how can we trigger Process chains from UNIX Server.
    Any pointers will be appreciated.
    Thanks

    I suggest to use the sapevt.exe.
    With it you can trigger an event in the SAP system with the execution of a simple command file (.bat for ex.)
    So the event will start the chain as you require.
    You can find more info for sapevt in:
    http://help.sap.com/saphelp_nw04/helpdata/en/fa/096e6b543b11d1898e0000e8322d00/frameset.htm
    Regards,
    Sregio
    Did you try that?
    Message was edited by: Sergio Locatelli

  • Process Chain from BPS

    Hi Experts!
    How can I run a process chain from a BPS layout for a basic cube?
    Thank you in advance

    check this link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/594e3c6bf4233fe10000000a114084/frameset.htm

  • I want to kill a particular process chain from a meta chain..

    Hi All,
    I want to kill a particular process chain from a meta chain as, its having some technical issues.So what is the procedure.to handle this process..
    Thanks..

    follow these steps
    1.Go to the chain which you want to kill .
    2.Go in the log view->top menu bar execution tab.>Remove from schedule.
    you are done
    Another way (bit complex but will work )
    1.Go to the process chain running (which you want to kill) in the log view copy the logid (lef hand side of screen you can get that)
    2.Open a new session ,Go to se37 enter function module RSPC_PROCESS_FINISH -->execute it
    3.Now again go Log view of the process chain right click on the start variant>display messages>Chain tab
    copy the variant ,instance ,date time etc
    4.IN execution screen of RSPC_PROCESS_FINISH enter the variant,instance,data time,logid and Type=TRIGGER
    status = R.
    Actually you will see something like this in input screen
    I_LOGID -
    >from log view in RSPC
    I_CHAIN
    I_TYPE   -
    >TRIGGER for start variant
    I_VARIANT----
    >from log view in RSPC
    I_INSTANCE------>from log view in RSPC
    I_STATE     -
    >R
    I_EVENTNO                       00
    I_HOLD
    I_JOB_COUNT
    I_BATCHDATE   -
    >from log view in RSPC
    I_BATCHTIME                     00:00:00
    I_DUMP_AT_ERROR
    Thats all and your are done.
    But I would suggest Remove from Schedule will surely work....If you have any doubts let me know.
    Regards,
    Rocks

  • Process chains from the flat file by using filezilla client version in  BI

    Hi experts,
    please let me know how to create the process chains from  flat file by using filezilla client version.
    so far, I didn't work with file zilla FTP. can anybody give detailed step by step procedure to find the flat files and download them and creating process chains from that flat file.
    Thanks & Regards,
    Babu..

    Hi,
    Check these:----
    Process chain configuration for Flat file loading
    http://wiki.sdn.sap.com/wiki/display/BI/Howtowriteroutinetofetchcurrentday%27sfilename
    Regards,
    Suman

  • Hey guys getting upset about how i tunes is debiting $1 from my account every month is it happening yo anybody else..i didnt buy anything from the stores...whats wrong.. they just cant debit frm my acc???

    hey guys getting upset about how i tunes is debiting $1 from my account every month is it happening yo anybody else..i didnt buy anything from the stores...whats wrong.. they just cant debit frm my acc???

    Have the same problem here... don't know what to do...

  • 7 Okt, 2013   Faktura  138,00 SEK   was my licens ended but still you take money from my account every month ... how come? I have delited all Adobe programs from my computer according to this matter.Please inform what I' am paying for. LS Konsult Åke Löf

    7 Okt, 2013   Faktura  138,00 SEK   was my licens ended but still you take money from my account every month ... how come? I have delited all Adobe programs from my computer according to this matter.Please inform what I' am paying for. LS Konsult Åke Löfvenius

    Hi, If you purchased from a reseller I would speak to them. If directly from Adobe then please reach out our support chat who should be able to assist.
    https://helpx.adobe.com/contact.html

  • How to execute a process chain from the Manage option of a Cube

    Hi,
    I have created a planning Cube  in BI 7.0 to which I am pushing the data through a workbook. However, the request does not turn into green by itself. For this I am using a FM .I have included this program in a Process Chain. I want this process chain to get trigger itself, the moment the data comes into the cube. This can be done either from the Cube or from the Workbook. Can anyone help me out with this.
    Best Regards,
    Debashree.

    Its not a problem thats how real time cube works,
    For a real time cube rquest wont be turned green untill the record volume is >10,000.
    If the request is not closed(not GREEN status) and you still need to see the data use the specific 0REQUID technical characteristic.
    OR
    You can close these request using the functional module RSAPO_CLOSE_TRANS_REQUEST
    Tips- 3 Variables do exist for these charecteristic as listed below
    0S_RQMRC:
    You should use this variable if you want a query to also return data that was yet not rolled up into the aggregates. However, only requests up to the first request with an incorrect status are displayed, transactional InfoCubes are therefore read in full.
    0S_RQTRA:
    Unlike the 0S_RQMRC variable, this only affects transactional InfoCubes. As during normal reading, only the data that is also in the aggregates is read from the other InfoCubes. You can use the variable in queries on a MulitProvider that consists of a transactional InfoCube for planned data and a second InfoCube for the actual data. In this case, the planned dates entered are immediately visible, but the actual data only becomes visible after the usual release procedure.
    0S_RQALL:
    This variable affects all InfoCubes. If a query contains this variable, all of the data in this InfoCube is read, regardless of whether or not it belongs to a request with an incorrect status.

  • Error in installing process chain from Business Content.

    Dear Experts,
    I have successfully installed the Technical Content from Business Content and now trying to install Content Master Data process chain for info package for the same but its showing error.
    <b>Technical Name for Process Chain : 0TCT_MD_C_FULL_P01</b>
    Error after instaling from BI Content : <b>Process AND has no predecessor.</b>
    Finally, while checking in RSPC it comes the name of Process Chain but its not showing anything.
    Also, one more thing is I am trying to install in development system and if that occurs successfully than transport to production as production directly don't wanted to do.
    Thanks in advance.
    Regards,
    NJ

    ithink u have not activated the process chainafter creating the process chain u might have saved it with out activating the process cahin so that is the reason why it is showing name name but northing in the chain first activate the cahin then it iwill show
    try this
    Aravindan pagadala
    satyam

  • Calling BW Process chain from Visual Composer

    Hi Gurus,
    i have a question. Does anyone testet to call an ABAP program or a process chain in BW (via ABAP) through a button in visual composer?
    Regards,
    Adem

    Hi Adem,
    this is possible, you must write an RFC function module,
    which calls a function module of the function group
    RSSM_PROCESS.
    For example you want to start a attribute change run you have to call the function module RSSM_PROCESS_ATTRIBCHANGE
    from your RFC function module.
    Best Regards,
    Marcel

Maybe you are looking for