Planning against new master data

HI all,
How do i plan against new master data that has no actual data.
For planning forecast data we maintain an admin cockpit. Now Is there a way that i run some exceptional reports to retrieve the new master data and then feed it for planning.
Appreciate your help in advance.
Regards,
Harika.

Hi Harika,
I assume you have a plan cube on which you are doing planning,.
For your requirement, may be you can create a lower level DSO which will pull records from the Master data. You can then create  a transformation from the the lower level DSO (which will have updated records) to your infocube. Once you run this, the infocube will have the updated master data..
Although not fully sure whether this process will help you or not.. Nevertheless you can try it...
Regards, Rishi

Similar Messages

  • BPS Web New master data (info object value) added to planning area

    Dear all,
    I am working with BPS in Web.
    Here you can add lines.
    Request:
    The user wants to add a new value of the lead column, ´
    which is not yet active in the master data of the info object envolved here.
    He simply wants to enter the new value in the opened new line and the
    system should store(add) that value to the master table,
    so that he could directly plan KF values to that new line.
    I know that we can use FM 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
    to post directly new values to the bespoken info object.
    Where and how could I add this function to the process.
    Note:
    It seems that the BSP dispatcher doesn't pass that line
    because the "invalid" line is rejected  in a step before ??
    Many thanks for your help in advance ! 
    regards
    Paul

    Vlad,
    Transaction RSD1 gets you into infoobject maintenance and it more or less equivalent to RSA1 and infoobject althought they have some better listing facilities for infobject in infocubes than RSA1.
    Paul,
    Are you really sure you want to give your users the ability to create new master data without any validation and potentially compromising your data quality and data integrity? 
    Sometimes in BPS you have to ask whether or not you should even though you could...

  • Update of Intrastat details against Item Master Data

    Hi I'm looking to import Intrastat details against item master data.  I understnad from the portal that this needs to be imported to UDO but need some guidance in terms of template set up. 
    Grateful for any help
    Regards
    David

    Hi,
    If you have made already the transactions you cannot update the G/L method.
    Secondly if you have set G/L by Item level then you need to define the inventory accounts for all the items in your template then only you will be able to proceed further
    Regards
    Md.nazeer Shaikh

  • Outbound IDOC not getting triggered while new master data is created

    Hi Experts,
    I am trying to trigger an outbound idoc for Cost Center master data when ever cost center is being created or cost center is being changed. (Usinf COSMAS)
    I have successfully made use of change pointers and now able to trigger the idoc when ever Cost Center is getting changed. But while creating new Cost center, IDOC is not getting triggered.
    I used the function module MASTERIDOC_CREATE_SMD_COSMAS for triggering the idoc.
    Could one of you please let me what would have gone wrong? Since IDOC is getting triggered while changing the master data but not getting triggered while creating new master data.
    Thanks in Advance,
    Vinoth

    Hello,
    when you activate BD21 for a message type, it creates a entry in the SAP tables. that these Cost Centers have been sent already and any susequent changes to this will trigger a IDoc.
    As for BD16, scheduling it wont help as, you need to specify the selection criteria, and i do not see how you will be able to dynamically get the selection criteria.
    Try BD95, and BD59 to create a change pointer for a field, so when ever this fields is modified (new/updated) an idoc will be triggered.
    regards,
    Abhishek

  • Unable to create a new master data type

    I am trying to set up a simple demo model on an On Premise S&OP on HANA system (Release 3).
    I have created and saved some master data attributes.
    But when I try and set up a new master data type, the system does not show any available master data attributes to select (even though 'All attributes' is selected in the dropdown), so I cannot save the new master data type.
    Any suggestions regarding this problem are welcome...

    Hello David,
    We are having S&OP 3.0 SP1 patch 1 on premise with HANA version 1.00.69.385057. We have old golden demo files imported.
    Could you please let us know...
    1) is it right combination..?
    2) Is it necessary to upgrade to patch 2.
    3) in case, we upgrade to patch 2, do we need to import golden demo file again for patch 2
    4) Do we have any release note for patch 2.
    Your quick response is highly appreciated. Thanks!!
    Regards,
    Dinesh Goyal

  • Loading new master data

    Hi experts!!!
    I am going to load new master data in our BI.Our BI consists of some cubes and DSOs which have data from past 3 years and which are based on old master data.Now the Master Data is completely changed to new values and will be loaded into our BI.I have following doubt regarding this:
    From past three years the transaction data that is loaded into our cubes and DSOs is based on Old Master data.Now if I suddenly load NEW master data values,what will happen to this old transaction data loaded until today?I can imagine that once I load new values,from now onwards,transaction data will be based on new values only.The question is what will happen to the old transaction data ?
    Please assume both cases of Time Independent Master data and Time Dependent Master data while reading my question.
    Thanks for your time.

    Hi,
    Case1 (normal case, happens frequently) - Only attributes of master data has changed.
    Your transaction data would reflect the old master data when you have master data lookups or reads on master data table (P, Q tables for time indep/time dep MD) for populating master data in the transaction data flow.
    In case just the attributes on the master data objects like Customer/Material have changed and these are used at the query level, the queries would show the new attribute values. In case the time validity/dependency has changed, the new time validity takes effect. For e.g Person X is respnsible for cost center A from 01/01/2010 till 31/12/2012. Now MD gets changed and Person Y is responsible for Cost Center A from 01.01.2011 till 31/12/2015. If the report is run now, the person Y would be shown in the report.
    Case 2 - The master data has big changes in the source system. for e.g. Cust 10000 is now 11111 or material 12345 is now 112233.
    In these cases your historical transaction data would be showing old master data.
    For e.g Person X is respnsible for cost center A from 01/01/2010 till 31/12/2012. Now Cost center A is changed to B and person Y is responsible for the same period. Old transactions with Cost center A shows X as responsible and new transactions with Cost center B shows Y as responsible.
    Even if your master data has changed completely, there would not be any affect on the existing transaction data....as new master data entries would be written to the tables and the existing master data remains.

  • Insert new Master Data Record for an InfoObject using a Function Module

    Hi @ all,
    is there any Function Module for creating a new master data record for an InfoObject? Implementing a FM for inserting a master data record into a master data table is done quickly. I think there will be problems with inconsistency implementing a FM using a simple "Insert" Statement. Isn´t it?
    I know it is possible to maintain an InfoObject in RSA1 (Master data IO> right click>Maintain Master data>execute(F8)> ...) but I have another requirement for using a FM.
    Thanks!
    Regards,
    Johannes

    use this
    RSNDI_MD_ATTRIBUTES_UPDATE

  • Editable Analysis Grid: Handling of New Master Data

    Hi folks,
    I've an analysis grid that is editable using a BEx WebTemplate in SAP BW Integrated Planning environment. The table contains a characteristic, that has to be qualified before a user can save the data entry. The problem is, that the values, the user can choose for this characteristic, have already to be maintained as master data. My question is, if there is a way to avoid this behavior. A user should entry any value for this characteristic and after he has saved the whole entry, the master data table should be extended with the new values.
    Anyone here with helpful hints for me?

    Hi,
      In BW IP, using characteristic relationship you can restrict the user from entering invalid characteristic values.
    But your specific requirement can achieved by any one of the following solutions,
    1. You can create a characteristic relationship of type "Exit" and you can write the necessary ABAP code to include your new user added characteristic value in to the master data table of that particular characteristic. Kindly refer the below link for more details,
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/1c3d0f31b70701e10000000a422035/frameset.htm
    You can use the class, 'CL_RSPLS_CR_EXIT_BASE' and  then you have to implement the methods u2018CHECKu2019, u2018DERIVEu2019 and u2018CREATEu2019. Among these methods, in the 'DERIVE' method you can write the code to add the characteristic values in to master data table.
    2. You can convince the user to add the new characteristic values in to the master data table by developing a ABAP report.  You can ask the user to enter the values and then execute your report.
    Hope this solves your issue.
    Regards,
    Balajee

  • How to report new master data in place of old master data in a report

    Hi Everyone,
    I have 0vendor master data which contains both old and new vendor numbers. I have transaction data that refers to both new and old vendor numbers. In my report I want to see the new vendor numbers with transaction data and new vendor number in place of old vendor number with transaction data. How do I achieve that? Can anyone shed some light on that. I have tried various scenarios but none of them working.
    Thanks,
    Wen.

    HI Wen,
    do you mean to say that you need some kind of mapping of old to new vendor numbers? In that case you could create a navigational attribute of the vendor and put in the new vendor number for both new and old numbers and then use this attribute to navigate and display.
    Regards, Klaus

  • Over write the existing master data with new master data.

    hi friends,
    we have 2 sources for master data text like source A and source B to load the master data text and as per requirement we have to stop load from source A. But if you check the master data target still the old records are existed (from Source A), if i try to delete those records as you know it is not allowing...and more over if we want to delet the mastr data we have delete the transaction data.
    In Mycase i don't want to delet the Transaction data and i need to over write the existing master data i.e Request A with Rquest B.
    Is there any solution for this issue.
    Thanks in advance,
    Sruthi.

    For overwriting the text from source B you have to have transformations from source B to your text datasource of your characteristic. Then you map the text coming from source B to the text for the characteristic.
    If it comes form source B the key for that characteristic with text, it will overwrite the text existed for that characteristic to the same key.
    For example you have 0employee and have a text datasource in source A which has employee_id and employee_name. In the Bw you have mapped in your transfer rules the employee_id to the employee_id and the employee_name to the employee_name. So for example you have extracted from source A the record:
    employee_id   employee_name
    0001               xpto
    If you have a same datasource of text coming from source B, if you do the same mapping in transfer rules in BW coming from source B, and you bring for example the record:
    employee_id   employee_name
    0001               zzzz
    You'll overwrite the old value of xpto to the new value zzzz
    Diogo.

  • How to find posted documents for Master Data in BW?

    Hello,
    We are planning to use Knowledge Warehouse to store some documents against some Master Data like 0PROJECT. The idea is to use those documents when reporting on real cost versus budget.
    We created a custom interface that we use to create new master data in BW directly, and we have an input field which precises the name of the files to be loaded. That works fine.
    However, we need now to include in that custom interface a table which will display the existing documents for the project currently displayed. We want to avoid to load a same document twice.
    I do not succeed in linking the master data values and the documents. I found the table RSODPHIOMA. It contains the key of the documents that I look for. How can I make the link between that key and my master data values?
    Regards
    Laurent

    Hi
    go to RSA1 -> Infosources ->
    Here go to top screen ...or find the control icon thru cntl +F
    here enter your infosource/infoobject name......
    Double click on the result and it will show the infosource...under that infopackage
    Assign points if useful
    Regards
    N Ganesh

  • BI-IP WEB characteristic without master data

    Hello!
    In Bex ready for input query i can use characteristic without master data and then i can insert new values in characteristic key (maintain this characteristic from ready for input query). But when i try use this feature in WEB application i get error messsage about incorrect master data validation. Do you have any idea  how use this feature in WEB?
    Thanks

    Hi,
    please be aware that this is called "Master data planning". Master data plannig is not supported in BI-IP although it may work in some cases. As far as I remember somebody posted how this could be done in the Web recently. I remember he used a class to achieve it. I have not tested the approach, but you should find the thread in the forum. Nevertheless you should try to find a "better" approach for generating new master data.
    See [Data entry of Character values;
    Regards
    Matthias Nutt
    SAP Consulting Switzerland

  • Open Transactions in ECC for Master Data changes in MDM

    Hi All,
    I have a basic Design question on how to handle the impact of Data changes in MDM for any open transactions with that Master object. For eg if we have a Material set up in MDM and in ECC and there are open Purchase Orders for that Material, now if the Base Unit of Measure is changed in MDM and gets harmonized to ECC(After Workflow approval of the Change) how will it impact the PO attached to the material . Can we do any configuration in ECC that will restrict any Open PO s not to take the new changed value and any new POs taking up the new Base Unit of Measure , or can we set up an alert/notification that will trigger for a PO whenever any Master Data is changed and the PO takes the new changed value on the fly . What will be the best approach from a solution point of view .
    Thanks ,
    Prabuddha

    Hi Prabuddha,
    In ECC if a change happens to a master data not all the changes are reflected automatically in the open documents like open PO or open Sales order. Some fields values have to be redetermined for eg: "pricing procedure", some of them needs to be changed manually for eg: "Description". Moreover specific to your eg of Base unit of measure, this is a sensitive field and has lot of impact on the process so there for changing such fields it is necessary to close all the open documents against the Master data record in consideration. This fact is regardless whether the change happens through an IDoc or directly by MM02/XK02/XD02
    Prabudha, Please revert if you have further questions.
    Best Regards
    P T Manoj
    Edited by: PT MANOJ on Sep 2, 2011 10:25 PM

  • Error while trying to add Master Data in S&OP

    Hi,
    I am getting the below error while trying to add new Master Data entries in S&OP. Can anyone help here please? I have added new items in the past, but did not get any error before.
    code: MASTER_DATA_OPERATION_EXCEPTION
    severity: INFO
    description: Error during Stage 02 of Data Integration
    log id: 08f6b26e-5981-4e21-ad65-17df697fdc62
    I have also attached the screenshot and the new data i am trying to add.
    Thanks,
    Thahir Masdook

    Hi Vivek,
    I have added Master Data in the past as well. Recently this system (Z45) was upgraded and the planning area was re-activated by my Project Lead. After the re-activation i am unable to add any Master Data and Save.
    Thanks,
    Thahir Masdook

  • Parent/Child Master Data Type

    I recently created a new master data type in my model, which included one attribute with the 'parent' check box checked - to signify that it was to be used as the parent.
    Upon activating the master data type - the system auto generated several other attributes within the master data type.  My question is, what is the purpose of these additional attributes and how are they to be used?
    Before Activation:
    Attribute
    Description
    Notes
    ID
    ID
    << marked as key and as required
    DESCR
    Description
    << no special check boxes checked
    PID
    Parent ID
    << marked with parent check box
    After activation:
    Attribute
    Description
    Notes
    ID
    ID
    << marked as key and as required
    DESCR
    Description
    << no special check boxes checked
    PID
    Parent ID
    << marked with parent check box
    IDA
    Ancestor: ID
    << auto added after activation
    IDL
    Level: ID
    << auto added after activation
    IDLA
    Ancestor: Level: ID
    << auto added after activation
    IDPTH
    Path: ID
    << auto added after activation
    IDPTHA
    Ancestor: Path: ID
    << auto added after activation
    DEACRA
    Ancestor: Description
    << auto added after activation
    PIDA
    Ancestor: Parent ID
    << auto added after activation

    https://share.sap.com/a:r2l29c/MyAttachments/38b00c31-a7f4-404c-8247-1a99ef4b0509/
    Hey JJ,
    The purpose of these attributes is for parent-child hierachy relationship.
    In addition to above mentioned attributes, you should also notice (via HANA studio), that another Planning object gets generated automatically.  The new planning object should be the name of your parent-child object plus "_ANC" prefix at the end.
    If you take a look at this planning object, you will notice that the object contains all the generated attributes (your attriubute plus "A" prefix at the end) in the definition.
    Once you load data into your parent-child hiearchy object the "_ANC" object will automatically get populated with parent-child node relationship.
    "A-prefix" attriubutes essentially represents the attributes of ancestor in this case.
    In addition, in order to do Ancestor rolllup in your calculation you will also need to create an ancestor planning level which contains all the attriubutes of your base planning level as well as these "A-Prefix" attributes.
    Please take a look at the document we created for "How to configure Parent-Child Hiearchy" from the share link
    It has more detailed information.
    Thanks.
    Daniel.

Maybe you are looking for