Planning area data not matching with backup cube / PSA

Hi friends,
while loading data from planning area to backup cube , for the key figure ( result of a macro),the data in planning area is not matching with PSA as well as with cube.
At the same time Data is matching at total level but not at disagregated level. And many times it disagregate in equal Proportion in cube/psa.
Pls its urgent.
Pts for sure.
Vishal.
9326179903

make sure you have replicated the extraction of the data source. This is needed to ensure your backup cube gets the current data as in the planning area
if you got to /SAPAPO/SDP_EXTR then you can see this button
you can set this up as a program scheduled to run before the updation of your cube
As for the disaggregation, test at what level you are choosing your characteristic? ( i suppose you can choose the level)
Are you extracting at a detailed level or at the aggregated level
Is your macro saving the data into a Keyfigure or is it an auxilliary KF or something?

Similar Messages

0FC_OP_01 extractor issues- DFFKKOPBW data not matching with

Hi All
We have an issue with the extractor 0FC_OP_01. Our business is comparing the values in
R/3 report u2013 G/L Account Balance Display (t-code S_ALR_87012277) with the
Open Items by GL Account report in BW .(actually these values in the BW report are coming from DFKKOPBW table in R/3) .
But since august, the R/3 G/L account balance report is not matching with the DFKKOPBW table balances. So bottom line the extractor 0FC_OP_01 is doing something wrong when populating the DFKKOPBW table which is causing these two reports to be out of balance
Did anybody face this kind of issue before? Please Advise.
FYI : We are following the same procedure to populate the DFKKOPBW table as in the below article.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a9996115-0b01-0010-b2b2-d9de0170a425;jsessionid=%28J2EE3417800%29ID0001499250DB01896329908162586522End
Thanks
KPK

In my case the Cube/PSA data itself is not matching with the R/3 report data.
Basically we run a job in R/3 in t-code FPBW with a Date id and Indentification. This job will pull the entries from base table DFKKOP into DFKKOPBW table .Then FRom this DFKKOPBW table data is loaded into PSA/Cube.
Here in my case the data in table DFKKOPBW itself is not matching with the R/3 report - G/L Account Balance Display (t-code S_ALR_87012277)) .
I am following the same procedure to run the JOb in T-code FPBW to populate the DFKKOPBW table as listed in the document at the above link. Moreover this difference in balances is occuring only starting from August ..Till July the balances in DFKKOPBW tally with the R/3report.
Please advise ..
Thanks
KPK

Inventory data not matching with R/3

Hi,
In R/3 production we have the data from 1999-Till date.From 1999-2004 Data was archieved in R/3 system.So we have two years live data in the R/3 production.
We have filled the setup tables and extracted the Inventory data then loaded into 0IC_C03 Cube.
But the values in BW report from 0IC_C03 is not matching with the values in R/3 report.
1.What could be the reason?
2.If we need to extract the archieved data from R/3 what are the steps we need to do?.
Pls help us with your suggestions.

We have followed as per the How to handle inventory managment document.
The quanity value is matching between R/3 and BW.But the Valuated Stock Value is not matching for some of the materials.For the current period it showing the right value(for ex.if we check for 12th Month).
But If we check the material for old months like October,Aug the value of valuated stock value is not matching with R/3 for some of the materials.
In RSDV validity table date maintained from 1999-Dec'200.
We are using the standard business content cubes and update rules.Is there any change needs to be done in update rules for 0IC_C03 cube to get the right values for all the materials?..
Pls help with your inputs.
Thanks
Soujanya

Planning area data not updated in infocube in APO system

Hi all,
User is uploading a flat file using addon program to an infocube 1, from this infocube data for sales forecast KF is getting transferred to a planning area KF using standard program RTS_INPUT_CUBE. I can see the updated data in Planning book (which refer the same planning area) data views. In planning book the sales forecast data is also getting copyied to second KF 'Arrangement FC' and its correct.
Now there is a infocube 2 (second) which is getting data directly from this planning area (infocube also contains both KFs). But When i checked this infocube 2 , the updated data is availabe in Sales forecast KF , but arrangement forecast KF is having old data only and user is running query on second KF , so he is getting wrong report.
Since there is no data flow for this infocube 2, and it is getting data from planning area, I feel its remote infocube.
I have also found the datasource for this planning area but don't know how to move further to find why data is not updating properly? Please help on this.
I have information that 2 weeks before data was properly updated, but this time data is not updated,
system version is SAP SCM 4.0

Hi Vivek
it is advisable to run the background jobs when the planning books are not being accesses by the users to prevent such inconsistencis. Hence i would advise you to run the jobs durng non-working hours. and if you have a global system, then you may restrict to run the jobs based on regional levels.
in addition, it is also a good practice to run consistency jobs before and after your have completed the background jobs. i hope you are using process chains to execute the sequeuce of jobs. if yes, then you can add consistency check jobs in the process chains.
some of the consistency check reports are :
/SAPAPO/OM17 - liveCache Consistency Check
/SAPAPO/TSCONS - Consistency Check for Time Series Network
/SAPAPO/CONSCHK - Model Consistency Check
and so and so forth..
you can find these conssistency jobs under APO Adiminstration --> Consistency checks in APO.
let me know if this helps.
Rgds, Sandeep

R3 data not matching with BW

Hi Experts,
we have an issue here. We are using 2LIS_11_VAITM and 2LIS_11_VASCL to load SD data. We use the fields RFSTK and RFGSK in BW to filter out orders that are processed. Now we find that these fileds dont match with the ones in R3. At R3 side i looked at VBUK table and it indicates properly the status of the order.
But in the BW side when we pull these the status fileds are not correct and they dont match R3 at all...How do i fix this.. Where can find or how can find from which table BW is actually pulling the information for these two fields.
Please reply.
DV

Hi Anil,
How these fields were added to the ES of those DS ?
How do i check this?
Have you done any Customer Exit (append method) to get the values for these fields?
Iam not sure, It was done formerly by someone.
If so, remember that we ca not get deltas that occured with the change to only appended fields of ES.
Does that mean the appended fileds dont work with Deltas.. they dont pick up the chnages??
DV
null

Data not matching in RSA3 and PSA.

Hi,
I have loaded data into BW from a Generic datasource and the values in R/3 and BW are not matching. Upon analysis, I found that the values for a characteristic are not matching even in RSA3 and PSA. All the values for other characteristics match excepting this single characteristic.
We have used user exit to populate the fields in the datasource in R/3. According to my knowledge, data in RSA3 and PSA should match. Can someone please tell me how the mismatch between RSA3 and PSA is occurring? Are there are any specific settings that I should be looking for?
Thanks in advance.

Hello karthik,
We have the same problem of difference in RSA3 and PSA data for 1 keyfigure...
it was a generic data source with function module....
The reason for this difference is When a record is splitted in to 2 or 3 data packages then you may get some inconsistencies in the data.....
Try to increase teh data package size and load then you will get the correct data(it worked for us)
Thanks,
Pavan.

The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
Mruduala

You are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo

Getting error when view - Requested data type does not match with existing

I have the siebel web service
In the BI publisher as mentioned in the 'Siebel_BI_Publisher_Integration_Concepts.pdf', I have imported the siebel web service
BI can recognize the 'Web service' and methods.
I have created the paramters. The data type is 'String'
When I try to view the report using the BI publisher, I am getting teh following error in th UI
"Requested data type does not match with existing data type"
This is the first time I am using BI publisher to call the Siebel web service. I don't know what this error means
I don't know whether any log file generated wit the details of this erro message
Any help is much appriciated
Thanks,
Kavitha

Hi all,
have you find a fix for this issue? Im facing the same situation, using Complex type, and String data type both in the service and Bi publisher. We are consuming CC&B services, and we have noticed this error appears when BIPublisher is running on WebLogic (10.3) but it does not appear when BIPublisher is running on OC4J , of course running the same report on both application servers.
Any idea?
Thanks a lot, regards
Nestor

Grand total values are not matching with Detail report

Report has grand totals and when I drill to the detail report, grand total values are NOT matching with parent report totals, I did some analysis but I'm clueless on this issue.
Please provide your thoughts and insight on this issue..
Thanks

is your summary and detail reports hitting different facts, like summary hitting aggregate and detail report hitting it's corresponding detail level fact..?
if then,
From Front-end:
Fix the filter values in detail report that are passing from master report then try delete each columns then check the grand total. If you found your values is matching by deleting particular column then you need to investigate what is the issue around with that dimension table..
From Database side:
1. check first aggregate table has proper aggregate data of it's detail..
2. Take the detail report obiee generated query and try to comment each dimension table and it's corresponding joins to the facts, (before, this delete all the dimensional columns and other measures from select statement and put only that measure where you are getting wrong value, so that you need not to comment all the select and group by columns which saves your time.. ). Need to check by commenting each dimensional wid and it's table from clause, if you found that values is matching then there is some problem with wid columns data population in your ETL.
Is that BI-Apps project?
btw, whtz ur name?

GL balances are not matching with Fixed assets ledger

Hi,
Please suggest me regarding this...
The issues is:when the legacy balances are uploaded in to sap there was the mistake.3 assets were entered twice(once in asset class 1250 & once in asset class 1300).It causes the GL balances are not matching with Fixed Asset balances(GL is less than FA).so now the client is asking to make manual entry by removing the recconcilation account settings and post manual entry then keep the reconcilation account as usual.They wanted to reverse the accumulated depreciation for the above 3 duplicated asssets for year 2007 & 2008.
How can i achieve the below:
1.GL balance was not equal (i.e lower) to FA ledger even at the time of go live(FI is lesser than FA)
2.For this i need to post one manual entry in FI-GL with the GO-LIVE date.is it possible? suggest me how to post?
3.After that i need to reverse the accumulated depreciation for the above 3 duplicated assets.how can i do this?
4.After that i need to remove the above 3 duplicated assets,how can i?
Please help me by giving your thoughts regarding this
Thanks
Sap Guru

Hi,
It is possible to post the adjustment entry from go live date provided you open the posting periods for the pervious year. (However this approach is not recommended for the following reasons - you have closed the books and must have published the results to local authorities. Adjustment now in the past year can cause some trouble from auditors etc. Secondly you are adjusting the GL balance for the last year, so you will have to complete the period end and year end closing for GL balances. So avoid kindly it)
For your problem - Go to transaction code OASV and post adjustment entry for the current period. Also check if your field status of assets contain field for shutdown of assets. If not change your field status accordingly. Once adjustment is done you shutdown the asset so that it does not post depreciation in future depreciation runs. (this will cater to your need of eliminating the assets. If you retire the asset then you will have to deal with gain or loss on retirement of an asset. If you can accommodate this entry, then you can use this figure in the final adjustment entry.)
Or Go to transaction code OAMK and set the recon account to post the adjustment entry.
Reversal of depreciation is not possible in SAP. So the only way to reverse the accumulated depreciation is by changing the recon account or using OASV, and passing adjustment entry.
regards
Thomas

Asset Balances Are Not Matching with General Ledger

HI,
After Doing asset year ending,balance carry forward,,,the Asset balances are not matching with the General ledger.what is the reason?
Kindly help me in this regard...it is very urgent.
Thanks
Sap Guru

Please run ABST2 for the relevant company code to reconcile FI and AA.
then check this out through ABST.
Regards
Velumani

Fund center reports Assigned values are not matching with ledger balances.

Thanks for your Support. We have activated funds management in May-2009. And deactivated one or two times. Now the status is active.
Now we are taking reports the assigned values are not matching with gl ledger balances.
1. We need to update records for April- May.
2. Records in between deactivated and activate time.
Please suggest updating fund centers and commitments.
Regards

hi ELI
i have checked the follwoing secnarios
1. funds management deactivated.
2. one document posted with amount10000
3. funds management activated.
4. we have executed FMN0
here no document is selected after execution.
Please suggest what are the activities we need to do if i am wrong...
Regards

Some employees designations are not matching with their actual designation

Hi All,
While downloading to excel sheet some employees designations are not matching with their actual designations maintained in infotye 0001.
Designations should match with infotype 0001.
How to rectifty this issue.
Let me know...
Regards,
Sita

Hi
Looks like you are dowloading the value from a field which does not contain the value you see in the infotype screen
In infotypr 0001 place your cursor in the designation field.
Press F1
See the name of the field & the table.
Have a look at the table using se16 and confirm what you see in the field is what you see in the infotype screen.
If it is same see in your code if you are using correct field.
If it is not the same trace in which table and field the value is stored and code your program to download from there.
Check in Tables HRP1000 and PA0001 and you should get your values
regards
Pravin

Error : Profit Center does not match with Business Area. Message no. ZGLTFI

Hi Everyone,
Error occurs when doing inbound PGR. Processed done so far are the following:
Normal PO created & released.
Inbound created
Transfer order created and confirmed.
When doing PGR via VL32N > click Post Goods Receipt error occurs
Profit Center does not match with Business Area
Message no. ZGLTFI0001031
Checked already in KE53 the Profit Center used was assigned to the Co. Code used in the PO.
The same Profit Center was maintained in material master.
The Plant used was assigned to proper division and business area.
Any other ways to check?
Btw not only in Inbound PGR the error occurs .. also happened in MIGO and MB1C.
Tried to do other transaction involing the material, plant and profit center all give the same error.
Any info shared is much appreciated.
Thank you.

this error is not a SAP standard error, it is an own message class (ZGLTFI0001), so it must be issued from a validation or user exit. Please find the user exit, or talk to FI Team and ask what they check

Clean-up all data that did not match with the selection.

Hi Everyone,
In my requirement I need to Clean-up all data that did not match with the selection from my internal table lt_cdpos.....in this case wat can i use like.'Refresh' or ' Clear' or 'DELETE ADJACENT DUPLICATES FROM lt_cdpos'.
Pls suggest me...

Hi Meenakshi
Try delete lt_cdpos where kunnr NE KUNNR (from selection screen) .
Before Checking <condition> make sure both comparing field type match with each other.
You can use FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' for append leading zeros in compare condition before comparing kunnr from selection screen
Regards
Parveen

Planning area data not matching with backup cube / PSA

Similar Messages

Maybe you are looking for