Planning area data not updated in infocube in APO system

Hi all,
User is uploading a flat file using addon program to an infocube 1, from this infocube data for sales forecast KF is getting transferred to a planning area KF using standard program RTS_INPUT_CUBE. I can see the updated data in Planning book (which refer the same planning area) data views. In planning book the sales forecast data is also getting copyied to second KF 'Arrangement FC' and its correct.
Now there is a infocube 2 (second) which is getting data directly from this planning area (infocube also contains both KFs). But When i checked this infocube 2 , the updated data is availabe in Sales forecast KF , but arrangement forecast KF is having old data only and user is running query on second KF , so he is getting wrong report.
Since there is no data flow for this infocube 2, and it is getting data from planning area, I feel its remote infocube.
I have also found the datasource for this planning area but don't know how to move further to find why data is not updating properly? Please help on this.
I have information that 2 weeks before data was properly updated, but this time data is not updated,
system version is SAP SCM 4.0

Hi Vivek
it is advisable to run the background jobs when the planning books are not being accesses by the users to prevent such inconsistencis. Hence i would advise you to run the jobs durng non-working hours. and if you have a global system, then you may restrict to run the jobs based on regional levels.
in addition, it is also a good practice to run consistency jobs before and after your have completed the background jobs. i hope you are using process chains to execute the sequeuce of jobs. if yes, then you can add consistency check jobs in the process chains.
some of the consistency check reports are :
/SAPAPO/OM17 - liveCache Consistency Check
/SAPAPO/TSCONS - Consistency Check for Time Series Network
/SAPAPO/CONSCHK - Model Consistency Check
and so and so forth..
you can find these conssistency jobs under APO Adiminstration --> Consistency checks in APO.
let me know if this helps.
Rgds, Sandeep

Similar Messages

Planning area data not matching with backup cube / PSA

Hi friends,
while loading data from planning area to backup cube , for the key figure ( result of a macro),the data in planning area is not matching with PSA as well as with cube.
At the same time Data is matching at total level but not at disagregated level. And many times it disagregate in equal Proportion in cube/psa.
Pls its urgent.
Pts for sure.
Vishal.
9326179903

make sure you have replicated the extraction of the data source. This is needed to ensure your backup cube gets the current data as in the planning area
if you got to /SAPAPO/SDP_EXTR then you can see this button
you can set this up as a program scheduled to run before the updation of your cube
As for the disaggregation, test at what level you are choosing your characteristic? ( i suppose you can choose the level)
Are you extracting at a detailed level or at the aggregated level
Is your macro saving the data into a Keyfigure or is it an auxilliary KF or something?

Planned delivery time not updating real time in apo

Hi,
I have a location product which is part of the active integration model.
The location and product are both available in ECC and APO.
When i change the value of Planned delivery time in ECC, the changes do not get transfered to APO even after RIMODINI.
For e.g. the planned delivery time currently is 1 day and it is changed to 3 days, even after doing RIMODINI the changes are not reflected in APO.
Kindly suggest if somebody has come across this issue earlier.
Thanks & Regards.
Santosh Joshi

Hi Santosh,
Please check by tcode CFM5 weather material is there in IM or not .
Also check CFG1 log on R/3 and SLG1 or /SAPAPO/C3 or /SAPAPO/CQ in APO.
Please confirm.
Manish

Data not received in InfoCube / PSA

Hi Everybody,
Today all the loads are failed with the Error "Data not received in InfoCube / PSA object / InfoObject", Could you please help how to solve the problem.
Regards
BW

Hi
First check that your ODS is active
Then ensure it has data activated and for the selection you want to extract
What kind of load are you performing? A full or a delta?
In any case when you fire your InfoPackage from the ODS to the cube a job named BI_REQ* will be kicked. Check this job in SM37. If you can open an InfoPackage with your ODS as DataSource then the DataSource is fine and the transfer program is activated.
Monitor this job and see what happens.
If the job is cancelled for any reason, look if there is a dump (ST22), a system message in the log (SM21 on all appserv) and if there is a TRFC transaction with error in BW (SM58).
Please let me know
regards,
Olivier.

Data not received in InfoCube / PSA object / InfoObject

Hi Experts,
i written code against keyfigure to convert values in to same currency values and assigned constant USD for the reference characterstic.
Now i tried reload the data but it throws error as 'Data not received in InfoCube / PSA object / InfoObject'
i hope you all understand my problem. if so please advise.
Thanks,
RK
Edited by: RK on May 21, 2009 6:48 PM

Did you try looking into short dump about the problem ?
try these links :
Short Dump "Data not received in InfoCube / PSA object / InfoObject"
Short Dump "Data not received in InfoCube / PSA object / InfoObject"

Business area is not updating when allocating stock to sales order

Dear Experts,
When ever we allocating/dislocating stock in MB1B with 412E and 411E movement type,business area is not updating in the
accounting documents.but we assigned business area to plant in the customization.its happening to our Depot,for remaing plants its working.
Regards,
Varun

please suggest me right forum to post the issue.
Regards,
Varun

Adobe Flash will not update to a W-2000 system and will not work? Is there a fix? Mozilla has disabled Flash. Do I have to go back to Explore?

Adobe Flash will not update to a W-2000 system and will not work in Firefox? Is there a fix? Mozilla has disabled Flash. Do I have to go back to Explore?

have you tried to install flash
restart imac
go to web site which require flash

To load data from a cube in SCM(APO) system to a cube in BI system.

Experts,
Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
Thanks,
Meera

Hi,
Think in this way,
To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO, then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
Thanks
Reddy

Data is not updated to Infocube (BI 7.0) when i load from flat file

Hi Experts,
               when I try to load data from flat file to Infocube (BI 7.0) with full or Delta, I am gettin following errors.
1) Error while updating to data target, message No: RSBK241
2) Processed with Errors, Message No: RSBK 257.
Till transformations everthing is successful but updating data to cube is not successful...
what is the message no. indicates? can i find solution anywhere with respective to Message NO.?
Anybody please help me..
Regards
Anil

Hi Bhaskar,
                   There is no problem with cube activation.But i try to activate the cube by using
the function module " RSDG_CUBE_ACTIVATE". It goes to short dump.Anyhow i want to know
that in what scenario we use this function module to activate the cube.
         There is no special characters in the file. I delete the requests in psa, cube and Re run the
Infopackage & DTP.But I am getting same error.
The following errors are found in updating menu
of details tab (display messages option)
1) Error while updating to data target, message No: RSBK241
2) Processed with Errors, Message No: RSBK 257.
                 Thank you
Regards
Anil
Edited by: anilkumar.k on Aug 20, 2010 8:35 PM

Cost Centre Plan data not updating FAGLFLEXT

Dear Experts,
In our production environment, our cost centre plan is not updating FAGLFLEXT table. Profit centre plan using GP12N is fine.
We are using the New GL and have FIN-CCA and FIN-PCA scenario activated.
Integrated planning is ticked in the planning versions for both Controlling and New GL Plan versions.
Controlling plan version and New GL plan version have the same name.
In table Controlling table COSP, I can see the plan data on business transaction type RKP1.
I expect to see it in FAGLFLEXT with RKP1 but I see no plan values at all.
In fact, in the previous 3 environments, we have not had this problem and cost centre plan and actual has updated FAGLFLEXT. Only in Production...
Any suggestions? Help if you can! Thanks alot,
Deb

Dear Ravi,
I don't think this is the problem.
It seems that:
- the CC plan was created -> it updated CO tables e.g. COSP -> no update to FAGLFLEXT
- the CC plan was deleted -> it updated CO tables with negative value -> updated FALFLEXT with negative value
-the CC plan was update again -> it updated CO table -> updated FAGLFLEXT and balance with negative value is zero
- the CC plan was deleted again -> it updated CO tabe with negative value -> FAGLFLEXT is in minus value!
It seems like somewhere between first and second steps, the scenario FIN-CCA was not behaving like it was active!
Have you come across this before?
Thanks!
Debora

Bug in newest version of iTunes: last played data not updating after songs are played

I just downloaded the newest version of iTunes on my Mac. The "last played" data is not updating automatically after a song has finished playing (even after waiting for a while). Sometimes in the older versions it would take 5-10 second for the data to update automatically, but even after several minutes, "last played" still shows as if the song had not just been played.

RestonMacGuy wrote:
I did something similar, but not the same: I "played" a few tracks from the iPod (fast-forwarding until about 30 seconds from the end) while the Shuffle was connected to my computer and in iTunes, which then caused the "Last Played" field to be updated.
The next time I connected my Shuffle, the Last Played values were updated.
I bet the Last Played was updated after you stopped playing the tracks...IN FACT. if you were watching your shuffle icon, you might have noticed the rotating thingy to the left of the eject symbol, meaning an update was ongoing.
This will happen AS LONG AS the track has "remember playback position" set.

Data not Updated in Custom Screen fields-Vendor Master

Hello,
I have created a custom screen in vendor master transaction and also implemented the two BADI's below.
Business Add-In: Processing Master Data Enhancements
(CUSTOMER_ADD_DATA/VENDOR_ADD_DATA)
Passed the Custom Program and Screen No in the method GET_TAXI_SCREEN
Business Add-In: Customer Subscreens
(CUSTOMER_ADD_DATA_CS/VENDOR_ADD_DATA_CS)
activate it with the BADI Processing Master Data Enhancements with method CHECK_ADD_ON_ACTIVE.
I also created a new screen and used few fields from LFA1 (Append structure fields) such that the fields on the screen are : LFA1-ZZFIELD1 etc...
Now the issue is the screen is displayed, but the data entered on the screen is not updated on the table LFA1 or data from the table is not displayed on the custom screen.
Am i missing something?
Regards,
Shiva

Solved this problem.
I built the query against InfoCube and not the characteristic itself. That's why I can't see the update.
Thanks.

Bdoc received but data not updated

Hello,
I am using CRM4.0
I changed the customizing in table CRMC_ACT_DECOM to change values of field KV_DEKO.
Then, I transported the modification usign R3AS4 to CDB.
I can see that the table CDBC_ACT_JOURN is updated correctly with the new values.
My problem is that I don't see the modification on MSA. When I try a select on this table, i just see the old values.
It tried to do an extract on replication object CRM_DNL_ADOCCH for my site, the bdoc is well sent and I can see the new data in it, but even after synchronisation, the data in MSA is not updated...
What am I missing ?
(the strange thing is that I didn't have this issue in dev environnement)
Thanks in advance,
EDIT : ok when I launch this query in query analyser :
SELECT *
FROM dbo.CDBC_ACT_JOURN
WHERE FIELDNAME = 'KV_DEKO'
I get all the data.
But when I am using the query in SQL Server entrerprise management, I don't see them !!
Edited by: Louis-Arnaud Bouquin on Nov 10, 2009 10:26 AM

>
sujith golla wrote:
> Status of the IDOC is "53", so successfully posted
> records that have the status can NOT be reprocessed using BD87
There are some tricks: you can either create a copy of the IDoc in WE19 and then process it or use report RC1_IDOC_SET_STATUS (be careful though) to update the IDoc status.
However, you might want to do some more research and use suggestions above before resorting to these measures.

Data not available in infocube

hi all,
I havae an Infocube for which data is coming from the ods.
yesterday i found the data is not available for an info object in ods for which data is there in source system.
then I manually enter the data in the ods and today morning when i check the data in the cube it is still displaying blank but data is there in ods.
thanks in advance
sridath
Edited by: sridath on Nov 19, 2008 7:31 AM

Hi,
There could be many reason for that data not coming to the cube.
are you able to see the the data in the DSO for this object??
Are there any routine written in the cube and the records getting deleted or changed in that?
If the value of this object is getting populated through some routine??
Are you checking the values in the report or in the cube??
The value for this object may be in the after image record in the cube....so check all the records in the cube for the same value of the key fields of the DSO which has values missing.
Delete the data from the cube through a selective deletion for this record which you want to get changed and then do a full repair from the DSO for same selections.
Indexes and compression will not affect this process in any way but once request is compressed it ccannot be deleted and you will have to delete the value from the cube through seletive deletion.
Thanks
Ajeet

Data not updated to the datatarget

Hi
i am loading data to infocube through psa.
data is loaded till psa successfully, but not till cube.
Error : "Updating to InfoCube ZHR_ABS
DTP, i get the following message, "Error while updating to target ZHR_ABS (type INFOCUBE)"
plese let me know how to load from psa to infocube
thanks

Hi,
Do u have any error stack for the DTP, if yes gothru the errored records and chk the long text for tht.... it'll give the detailed error...
pls provide the same...chk with the above note also...
rgds,

Planning area data not updated in infocube in APO system

Similar Messages

Maybe you are looking for