Planning at Sub-Assy Phantom Level - Work order&Sales order FG Level

Hi everyone,
I'm searching for a way of setup my SAP to have my MPS loaded at the sub-assy(phantom) level and my work orders/sales orders loaded at the FG assy level.
Loading the MPS at the sub-assy and exploding requirements to the components are working fine, the issue is that I need to create a work order/sales order on the FG assy level to be able to backflush the components, create FG stock and sell the product. When I create a work order on the FG assy level SAP is adding additional dependent requirements on the raw material level, duplicating the demand some times,I would like to avoid that. Iwanted to keep just dep requirements generated by the FCST loaded under the Phantom Sub-assy level........Do you have any ideas on how to solve this? Thanks

Hi Dharma,
I've tested this Strategy but it didn't work for my case........let me try to explain my issue in a different way.
The way my BOM's are setup today, I have several Halbs(Which are setup as phantoms) that are options to the product I sell, and the customer is sending me forecast under these options only, not on the Ferts. I'm loading my LSF under this halb phantom level and this is demand is exploding to the ZROHS, which is what I want. When the customer wants to buy a product from me, they send me a PO under the FERT level (Each Fert has a different combination of Halbs). In order to backflush my ZROHs I have to create a work order under the FERT level(As the HALB is phantom) and this is generating additional dependent requirements on the ZROH level..........
One example, if I receive a Forecast for 1000 pcs of the HALB A, I load the LSF on Product A and my raw material will have 1000 pcs as depreq. When I receive an order from the customer, let's say they want to buy 200 pcs(which should be already included on the demand I loaded under the Halb), I create the work order on the Fert level for 200 pcs. If I run the MRP at this moment the system will request me to buy the 1000 pcs already forecasted plus these 200 pcs that I got one order for....
Hope I could explain better.
Thanks for the help,
Douglas

Similar Messages

MRP Strategies - Planning at Sub-assy(Halb) Phantom level

Hi everyone,
I'm trying to find a MRP strategy for my FERTs and HALBs where my MPS (Ind req) is loaded at a PHANTOM HALB level creating dependend requirements on the Raw material ROH and the most important, the Sales Orders that are created on the FERT level must consume the Ind. req loaded on the HALB PHANTOM level.
Do you have some ideas on how to do this?
Thanks in advance,
Douglas

Hi,
How about:
1. MRP strategies: 40;
2. having an Order BOM with component of Phantom HALB.

Planning IOndicator in control tab page-Work order

How does the system assign the indicator "Unplanned, planned and Immediate" to a work order. What are the fields it considers when assigning the Planning indicator in Control tab page of the work order

It is based on the configuration settings that you have maintained in SPRO:Go to the transaction OIOS or following the path:
SPRO> Plant Maintenance and Customer Service>maintenance and Service processing>Maintenance and Service Orders->Define Default Values for Planning Indicator for Each Order Type
These Indicators could be used for Reporting Purposes in IW 38, you could view how many planned orders, unplanned orders and Immediate Orders were there.
Regards..

Assign Valuation Area to work order type

I have created new order types but i am getting a stop error saying the valuation area is not defined when i put in the planning plant on the initial create work order screen.
Can anyone advise of a solution?
Thanks,

hi
you need to assign the order type to planning plant in T code OIOD. kindly post the exact error with message number
regards
thyagarajan

Work order via Sub-Inventory level planning

Hello Team,
We want to create work order via Sub-Inventory level planning as standard program 'min-max planning report' is nor creating WIP Jobs at sub-inventory level.
Kindly guide me if this requirement is possible and if so do share your knowledge on it.
Thanks/Suresh

You can only create a Move Order or requisition from Min/Max at the Sub Inventory level. To create a job order it is organization level

SSRS 2008 Work order report , in sub total donot want to add the 0 level in ( how to add the expression )

working in Work order report, this report has different level , for example
0 level transaction
1 level transaction
in subtotal don't want to add 0 level transaction,
when I did the sub total it added all the level , so in sub total amount double up because of that
how to add the expression so I can the level 0 take out from sub total , so it does not include in sub total
can some one please help me with this
thanks in advance

Hi Simon_ Hou
I tried the expr the way you suggested , it did not work getting error message, the exp I added is below
this the expression I added on sub total where is highlighted in Yellow, under Cost amount column,
I really appreciate the help
=Sum(IIF(Fields!COLLECTREFLEVEL.Value=
"0",0,Fields!CostAMOUNT.Value),"DataSet1")
please see below my QUERY, can you please help and let me know what I did wrong in my exp
SELECT        PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
                         PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
                         PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
                         PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
                         PRODCALCTRANS.LINENUM
FROM            PRODTABLE INNER JOIN
                         PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID
WHERE        (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
                         (PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate)

Use of Planning Table (MF50) in Capacity Levelling with Production Order

Hello Experts
I wish to know that is it possible to perform Capacity Levelling in planning table (tcode MF50) with respect to a Production Order ? It is known that MF50 is used in Repetitive manufacuring to do the capacity levelling with respect to Planned orders. But in our discrete manufacturing scenario we want to use planning table to the capacity levelling with respect toa Production order.
Any clue or help pertaining to this will be highly appreciated.
Thanks in advance
Regards
Jayanta

Dear ,
MF50 is does the cacapcity leveling based on mateail -run schedule order (planned order ) where as in discrete manufacturing , when you run the MRP , MRP system assume Infinite Capacity and schedule the order as per your selection in MD02(2,1,3,3,2) and then you convert those planned order to Production order .Here you checkied the Capacity in Production Order level .
In stanadrd SAP , it is not possible to use MF50 for discrete production order.
In discrete order or process order , do the caapcity leveling , there are seperate planning table available based on Over all Capacity Profile and Schedule type .This can be done in following way :
1.CM31-Production Order Wise -Tabular
2.CM23-PO wise -Graphical
3.MC88: Ruf Cut Planning
Work Centre Wise : CM21 -Graphical , CM22-Tabular Planning Table .
Make sure the below set up before you carry on the Capacity leveling :
.Define time profile in OPD2.
Define the strategy profile in OPDB
Define the Overall profiles in OPD0.
In OPJK maintained check capacity with SAPSFCG013 profile for your production order type
In OPU3 , scheduleing parametre s: Generate Capacity , Scheduling Type , Automatic Log ,Start date in Past as per your req.
In OPJU , chekc the contol tab of the scheduleing as per OPU3
In OPKP- Production scheduling paranmeters assing the overall capacity profile -SAPSFCG013 with finte scheduling tick.
Master Data :
1.Materials Master define the Production scheduler and production scheduling profile
2.Work Center - Define the capcity planner group,activate checkbox Relevant for Finite sceduling,on the capacity header define the shift timings,break timings and unit of measure,no of individual capaity, enter formula for scheduling in capacity view.
3.Routing - enter the values for the standard values. Use control key with scheduling.
Hope this will help you .
Regards
JH

How to stop the Job work orders to sub contractor failed to deliver goods?

Dear friend,
If a job work vendor didn't deliver the goods in the stipulated time say 50 days this vendor to be stopped for further job work orders. Each and every order follow's the abover rule. How to configure the sap? Manual blocking not required. Automatic blocking is required.
Regards,
TS.
Edited by: tadavarty srinivas on Feb 21, 2008 6:15 AM

u nee to take help of source list but the thing is then system will not allow you to issue any type of po to this vendor
to achive this
stpe1 : activate source list at plant level(as u mentioned it has to be for all the vendors)
step 2: create a source list for all the material (externaly procured material or sub contracter)
step 3: mark the BLK check box in front of that vendor
or
JUST BLOCK THAT PARTICULAR VENDOR USING TCODE XK05

Work Order - Maintenance Planning plant change

Hi Gurus,
Is there any way to change the maintenance planning plant in a created work order? We are having an issue on work orders and we need to tranfer our open work orders to another plants to solved the issue. Please me let me know if this is possible to do in SAP. And let me know how to do it in SAP.
Thanks in advance,

Hi,
The start of the plan is not option as this will surely have an impact. Anyway, work around for this issue was provided and this is OK now. We will continue with the old orders untill such time they will finally be closed. No postings will be created against this old orders and if there's a need to do GR new orders will be created in new plants for the postings.
Thanks for you help,

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

Work order dates calculated by priority when created by maintenance plan

Can anyone tell me how to get the dates on a work order created via a maintenance plan to be calculated from the priority? I know how to get the notification dates to calculate from the priority when created via a maintenance plan but I can't seem to get the order dates to do the same.
Any info would be most appreciated.

Check these links
Influence Order basic start/end dates from maintenance plan
Scheduled Maintenance basic start and finish date

Capacities planning in Work Order

Dear all,
I have the following problem. I have one Work Center that contains 5 capacities that are supposed to work 8 hours/day. Now, I created one Work order in which, in the operations tab, I have planned several activities that are supposed to take some 11 hours of work and the job have to be done by one capacity. The system calculates the duration of work and defined it for 2 days. My question is why the system does not take in consideration the fact that the WC have more than one capacity and that none of the capacities have other activities in the same period of time. I specify that the settings are the following:
and there is no formula entered in Capacity and Scheduling tabs. Can you help me and tell me which is the formula tat can help me to calculate the capacieis requred and work scheduled?
Thank you very much.
Best regards,
Sorin

Dear Peter:
Thank you very much.
Best regards,
Sorin

How to regenerate COSS table for work order operation planning hours

Hello,
I am looking for a SAP report or a custom solution to update the table COSS table from work order operation hours. Several work orders incorrectly updated in the table COSS with result the cost is incorrect.
For example: In the work order opertions, I have planned 2.5 hrs and in the table COSS it is 1.5.
Much appreciate for your help
Bill

It is quite simple actually.
As soon as your array exceeds SDU (defaults to 2048), sqlnet will fragment the packet. (see: sqlnet more data to client messages in your trace file)
As soon as the packet is bigger than your NICs MTU, the NIC will fragment the packet.
So, depending on the number of bytes for 1 record, high array size make sense or don't make sense.
And ideally SDU should be a multiple of MTU.
So do high arraysizes make sense? Usually not.
Hth
Sybrand Bakker
Senior Oracle DBA

How to change the main work center and work center of each operation when generating work order by maintenance plan

Dear experts,
I face a problem that system get main work center from equipment master data as a default main work center in maintenance plan when creating maintenance plan. however, if main work center in equipment is changed later, the change will not synchronize to related maintenance plan. if work order is generated from maintenance plan, main work order in order is defaulted from maintenance plan instead of updated work center in equipment.
another problem is that, for those orders generated by maintenance plan, the work centers in operations is defaulted from task list in maintenance plan. in most case, work center in task list is dummy. Actually the work is done by work center in equipment master data.
My expectation is how to auto replace the main work center and work center of operations in work order with the one in equipment master data if order is generated by maintenance plan? is there any standard configuration or enhancement/BADi that can help with this requirement?
thanks！
Wesley

Wesley,
Sorry - development is the only way.
Another option is to create a batch program that runs before your IP30 run(s) and updates any maintenance items and task lists with the correct work centres.
PeteA

Work Order Smartforms.. How to get the Service level Items...

Hi Experts,
I am working on Work Order Smartform... I got everything but i am stucking at Service level Items... There is one Table called ESLL.. I am trying to fetch the data from that table but its not printing.. So, please help me regarding this issue.. any logic to implement it..
Thanks in Advance
Regards,
Murlaikrishna

Hi Karthik,
For every PO we have item level data... in that we have Service level data tab. But there is no link between PO and Service level items to fetch, I have used the tables EKPO and ESLL for fetching the data from service level by usin PACKNO field.
When I am writing the select statement for ESLL, service Item level data is not printing from ME23N...
Thanks in Advance,
Regards,
Muralikrishna

Planning at Sub-Assy Phantom Level - Work order&Sales order FG Level

Similar Messages

Maybe you are looking for