Planning BoM in PP

What is Planning BoM and how it is created?

Hi,,
You can use an independent BOM for long-term planning. This means you can create a separate BOM for long-term planning different to the one used in operative planning.
By using an independent BOM in long-term planning, you have the advantage that you can simulate planned changes to BOMs in advance. Therefore, using long-term planning, you can determine in advance how the use of a different assembly or raw material would affect available capacity and the purchasing budget.
pls refer the link
http://help.sap.com/saphelp_470/helpdata/en/a2/a6f986e4ec11d1a6ae0000e83235d4/content.htm
Regards,
Sheik

Similar Messages

  • Planning BOM & Forecast Consumption

    Hi,
    Is there any functionality to replace planning bom for a process enabled org...Aslo what are the setup to consume forecast at sub assemeblies.For eg: consumption should happen for a intermediate or sub assemblies when a sales order is placed for the FG..Forecast will also be placed for intermediate or sub assemblies....
    Thanks

    Use planning BOM which contains your sub assemblies or intermediates. Explode the planning BOM to arrive at forecast for individual sub assemblies / components.
    Try using Forecast type : consume and derive in item setup

  • Planning BOM creation

    Hi,
    What status should have the customer BOM for us to create planing BOM?
    I have the message : "the customer BOM don't have a valid status"
    Tks for help! : )

    HI
    In OS28 the BOM status is 1 then check in CS02 for your BOM > header> quants/longtxt> BOM status it shoul be again 1
    make it 1 in CS02 if it is not 1
    or try with create new BOM in CS01 with usage 5 or in CS61
    Check and revert
    Regards
    Anupam Sharma

  • Planning in APO with configurable products

    Dear Gurus
    we would like to use APO DP in order to plan the demand of configurable products managing the demand figures only for a combination of the two main products characteristics (model/version) without having in DP all the complexity of the order configuration.
    Moreover we would like to allocate this forecast to the plants and make a rough capacity planning. The levelled forecast (MPS) should then be used to explode the dependent demand of the critical components at SKU level.
    In order to manage this process I was thinking to introduce u201Cdummy codesu201D that represent the charatteristics combination and u201Cdummy BOMu201D for the explosionu2026. This in order to be albe to use SNP to perform the capacity planning and BOM explosion.
    Other scenario could be to make the capacity planning and BOM explosion only in DP (with planning BOM) but Iu2019m not sure of the feasibilityu2026
    Could you advise on which could be a possible approach and if you had such similar issue to face?  Thanks in advance
    Regards
    Ayan Bishnu

    Hi,
    Here you may think of using planning product concept. Inshort you may plan on the basis of one of your critical subassembly
    and this subassembly wud be consumed for most of the order demands.
    Please check if it is suitable for you and revert
    Thanks,
    Mangesh A. Kulkarni

  • BOM exlosion date and basic scheduling date

    HI gurus,
    I am new for SAP, and I currently learning basic date scheduling and BOM explosion.
    My doubt is if during requirement planning bom is exploded to determine requirements then, why again on basic start date bom is exploded?
    if this is only in case of alternative bom then also selection of bom and its explosion takes place on the day of mrp run to determine requirements,still in this case on basic start date why bom is exploded?
    please help me. correct answer will be rewarded in points!!
    Akshay Naware

    Hi Akshay
    Your question is not clear. On the MRP process the BOM is exploded only once for each planned order. Under which circumstances the BOM is being exploded again?
    Please observe that there is a customizing to determine which BOM explosion date will be considered by MRP. You can find on transaction OPPQ, under section BOM Explosion.
    The following note also provides a very detailed explanation of the BOM explosion and master data selection:
    412736 - MRP: PP master data selection (explosion date)
    BR
    Caetano

  • Backflashing will Pick which BOM usage by default ?? help

    Hello friends,
                  We have made a single BOM with BOM usage 1(Production)
    and BOM usage 5(costing),we are having different components in different usages.
    Now the question comes that when we perform backflashing of BOM code in T-MFBF:
    1)system will Backflash BOM with which usage indicator either 1 0r 5?
    2) what are the settings by which system should always consider BOM with usage 1 (production)?
    Looking forward for response
    Points will be awarded
    Thanks
    Jase

    Hi,
    SPRO > Production > Basic Data > BOM > Define BOM Usages
    Here you define whether a BOM is production relevant or not
    SPRO > Production > MRP > Planning > BOM Explosion/Routing Determination > Define BOM and ROuting Selection
    Here you define priority of BOM usages.
    Please check SAP help:
    http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d2a9c44af11d182b40000e829fbfe/frameset.htm
    Regards,
    Csaba

  • Planning item forecast consumption

    We have a business need to use forecast demand to react and order long purchasing lead time items early and stock sub-assemblies to reduce manufacturing lead time. However our sales orders are for unique items (configured by outside system) , which cannot be forecasted as these items never repeat.  It’s also not possible to create Product Family or planning BOM with Base model as assembly and saleable items as components because, saleable items keep changing (as they are unique). Due to this reason, standard forecast explosion will not serve the purpose of consuming the forecast. Hence, we are exloring the forecasting at Planning item level, which is a logical group of similar type of saleable items. Planning Bills will be created to include sub assmeblies and critical components. However now we have a problem with consumption, Planning item forecast needs to be consumed as sales orders for Unique items get created. Is there a way in standard oracle to address this business scenario? We are on 11.5.x and using MRP. Early response will be appreciated
    Thanks,
    Nitin

    Use planning BOM which contains your sub assemblies or intermediates. Explode the planning BOM to arrive at forecast for individual sub assemblies / components.
    Try using Forecast type : consume and derive in item setup

  • Sales BOM & Plannig BOM

    Hi can anyone explain me the difference between sales BOM and Planning BOM?

    Hi All,
    Production Bill of Material
    Describes a finished product made up of different quantities of different components. During a production process, the components are turned into the finished product. The production process could be a manufacturing, assembly, packaging, or other sort of process. Components can be physical items (such as a screw or a wooden board) or virtual objects (such as one hour's work).
    Sales Bill of Material
    Describes a finished product that is assembled and is about to be sold. The difference between an assembly bill of material and a sales bill of material is that only the finished product appears as a single item in the sales order for an assembly bill of material, whereas both the finished product and the components appear as separate items in the sales order for a sales bill of material.
    When displaying a Sales BOM in documents, the user can choose whether to display price and total for parent item only or to display prices of child items as well.
    Reward if useful.
    Regards,
    pherasath

  • Order BOM Usage 5

    Hello,
    Is it possible to Create an Order Bill of Material (CS61) with a BOM Usage of 5 to explode the Order BoM structure on the sales order line item? I'm not convinced but would love to know if it is possible.
    Thanks, Mart

    Hi Mart,
    In an Order BOM the Sales Order is already created and then the order BOM is created. However, using the earlier solution, I dont think that the BOM will explode, since the SO is already created.
    However, you may check settings in IMG in the following path:
    Production > Material Requirements Planning > Planning > BOM Explosion > Define BOM Explosion Control
    However, before going ahead with that, I would go ahead and consult a PP person to make sure, it doesnt have other implications.
    Regards,
    Amit

  • SAP PP- Planning with Planning Material(60)u201D

    Hello SAP-Guruu2019s
    Pls explain the Strategy u201C Planning with Planning Material(60)u201D and pls give any examples if possible.
    Thanks in advance

    Dear,
    This planning strategy is particularly useful for planning BOMs that contain variant as well as non-variable parts.
    This trategy allows you to plan the variants of one product. The term variant indicates "similar" parts; which implies a much higher number of variants. With this strategy, for example, you can easily exchange a component in all similar BOMs.
    For Strategy 60 , Availablity check is carried out "Check against planned independent requirements" , inthat case Only planned independent requirements are taken into accout and Confirming. There is no ATP check logic.
    Please refer thislink,
    [Planning with Planning Material(60)u201D|https://forums.sdn.sap.com/click.jspa?searchID=17043588&messageID=5369851]
    Regards,
    R.brahmankar

  • Reg : Sample BOM

    Hi PP Guru's
    Please tell me step by step method of creating Sample BOM with usage " 8 "
    My scenario is like this I receive customer requirement  for developing new product in Research & development
    Part number ( FG material ) is created in PLM & MDM system and I will create Production order manually in CO07
    Regards,
    Jaya
    Edited by: jaya vimal on May 17, 2010 8:22 AM

    Hi Jaya Vimal,
    Following are the detailed steps for creating BOM with usage "8"
    Creating a Material BOM with usage "8"
    *Procedure*
    How to create a BOM with usage "8":
    Choose Logistics ® Production ® Master data ® Bills of material ® Bill of material ® Material BOM ® Create.
    You see the Create material BOM: Initial screen.
    Enter the following data:
    u2013 Material (Finish product for which BOM is to be created)
    u2013 Plant (in which you want the BOM to be valid)
    u2013 Usage (8)
    u2013 Alternative (if required)
    u2013 Data to define the validity period
    Confirm your entries.
    The item overview appears.
    Enter all the items you require.
    Confirm your entries.
    The BOM usage you selected may support some item status indicators as optional fields. If you want to process the indicator for several items, select these items and click .
    The item detail screen appears.
    Choose the Status/Long text tab page.
    See also:
    Status/Long Text
    u2013 Process the indicators for the item status and new item data, as required.
    u2013 Confirm your entries.
    Save your BOM.
    You get the message:
    BOM for material  created
    The system assigns a new internal BOM number.
    With usage "8", this is only a planning BOM.
    Regards,
    Shiva

  • Difference between FI & CO-PA???

    Hi Experts,
    We confirmed an production order (related to sales order production). We confirmed zero activity and afterwards zero quantity has been delivered (goods receipt created with zero amount) to stock.
    By one activity I see following ...
    Plan quantity: 0,250 hours
    Actual quantity: 0 hours
    Target quantity: 0,250 hours
    Using the standard formula" Variance=Target costs - Actual costs  " system calculated also overheads and the variance of overheads has been settled into CO-PA.
    Does such a variance appear in FI ??? We have no relevant accounting document to the PSG document.
    How the variances affect the FI and CO-PA results ... do we have an difference???
    Thanks

    Hi
    In your case at the time of production conformation no process cost and no material cost aswell. so zero price. in that case no fi document will be updated.
    Here you need to understand three prices
    One is Plan price which calculated with Planned BOM and routings multiplies pland quantity
    Second one is Target price which is multiplication of plan pice and actual production.
    Last one is Actual price calculated on production conformation based on production version which Actual BOM and routings.
    variance will be caulculated actual price and target price.
    in your case every thing is zerooo so no fi document.
    padma

  • Inspection Lot  in ECM

    Dear All
    My client is running the business in SAP with ECM.ECM is active for material master,BOM,routing and inspection plan and for external procurement we are processing with scheduling agreement,So when ER&D is releasing the part number with revision level 1 we are uploading in material master,BOM,Routing and inspection plan with revision level one, same thing is updating in scheduling agreement and we are creating the schedule lines manually or through MRP with reference to the schedule agreement whenever we are taking the GR with reference to the schedule lines inspection lot is creating with release status with revision level one.After some time ER&D is releasing revision level 2 for the same material due to some tech.problem after that we r uploading in inspection plan,BOM with revision level 2.So,now we are taking the GR means inspection lot is creating with created status for revision level 2 because in sch.agreement we not changing the revision level.So,system is creating the inspection lot with reference to sch.Agreement revision level.Please suggest me any manual triggering or automatic option is available to affect revision level in SCH.agreement
    Regards
    Srinivasan.P
    Edited by: srinivasan ponnurangam on May 4, 2008 12:24 PM

    Dear,
    Inspection lot will be created in Base unit of measure measurement only.
    In material master you will get the Base Unit of Measure Unit of issue in quality view.
    Then use BADI QEVA_ALT_QTY_INPUT Method PROCESS_QUANTITY
    method IF_EX_QEVA_ALT_QTY_INPUT~PROCESS_QUANTITY .
          CALL FUNCTION 'QEVA_ENTER_QUANT_IN_ALT_UNIT'
            EXPORTING
              I_QALS = i_qals
              I_RQEVA = i_rqeva
              I_QTY_NO = i_qty_no
            IMPORTING
              E_VMENGE = e_vmenge
        endmethod.
          Implement method MODIFY_SCREEN with the following source code:
        method IF_EX_QEVA_ALT_QTY_INPUT~MODIFY_SCREEN .
          CALL FUNCTION 'QEVA_ALT_QTY_MODIFY_SCREEN'
            EXPORTING
              I_MATNR = i_qals-matnr
            IMPORTING
              E_UNITS_EXIST = e_value_help
        endmethod.
          Activate the methods and the interface.
          Activate the implementation.
    I hope it will work for you.
    Regards,
    R.Brahmankar

  • Change in POIT configuration

    Hi Experts,
    I am integrating SAP ECC with MES.I am using POIT trannsaction to transfer the production order from ECC to MES through Middleware.When I transfer the order every time the planned routing and planned BOM is also coming to MES.Since I always use the different Routing in MES other than the routing comes with order , I don't want Planned routing to be transffered along with the order when I do POIT.
    Is there a way to avaoid this planned routing coming in the LOIPRO Idoc when I do POIT.I came to know in POIT there are Global selection parameters can help in this.
    Can any body tell me what is the change in global selection parameters in POIT?
    Regards,
    Guru.

    Hi Gopal
    1. It is not possible to remove the complete Menu Bar but you can remove few individual menu items using the following configurations.
    MobileEngine.AWT.MenuEntry.DisplayTrace = false
    MobileEngine.AWT.Menu.DisplaySettings = false
    Refer to documentation for more details.
    2.To roll out the changes to 100s of users, just create a Client Installer addon containing your changes and then assign the patch to all users.
    3.No. the application sync button cannot have the same functionality as that of framework sync.  If you dont want to use the local password for sync, then have a text box within the application which prompts users to enter their sync password.  Now read the value and then use the API SyncManager.getInstance().setSyncPasswordOfCurrentUser(String password) to set the password.  This should solve your problem
    Best Regards
    Sivakumar

  • Need clarification for MRP Run

    Dear SAP Guru,
    Need the clarification for MRP Run:
    1.At the time of MRP Run what is the status function for - shipping notification?
    2.First i have run the mrp planning mode is normal after that i have some changes in material master , so planning mode is - RE Explode planning & Bom ? AT THE TIME OF MRP RUN  it is correct
    3.In background MRP Run at MDBT - what is the PLANNING MODE ?
    4. How will work on automatic PO Create through MRP Run PR\S.?
    Kindly give me the feedback , i am waiting for your reply.
    Thanks,
    Uma

    Hello Uma
    1 - A shipping notification is a confirmation from the vendor that the material has been shipped.
    2 - When you change your BOM or material master MRP settings, system automatically set a flag on the planning file to re-explode the BOM. Therefore, MRP automatically re-explode the BOM, even with planning mode 1. Planning mode 2 is only necessary when you need to force a new BOM explosion and I don't recommend you to use it frequently, as it may lead to performance issues. See my document MRP: Why shouldn’t I use planning mode 3 on a productive system? for more details.
    3 - See notes 206666 MRP: Control parameters during planning and 135788 - Planning mode in material requirements planning.
    4 - MRP does not create or change purchase orders or production orders. MRP can only create planned orders, purchase requisitions or schedule lines.
    At last, I wrote the following document with links to the MRP FAQ notes, which may be helpful to you:
    MRP: Frequently Asked Questions
    BR
    Caetano

Maybe you are looking for