Planning Book Error during forcast voew

When i am change the dataview  time bucket profile (i.e .Period structure settings) planning book for Monthly display of Data View instead of present view which is weekly an error pops up as:
Period to date 31.01.2008 cannot be determined
Message no. /SAPAPO/MA 120
Diagnosis
The system cannot interpret one or more of your data entries.
Procedure
Check the date parameters for this operation, and change accordingly.
please suggest what to check to resolve the problem...
thanks in advance

Hi Kirankumar ,
This is the problem more related to the defining Proportional Factor
See <a href="https://websmp203.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=432360">OSS note 432360</a>
Thanks in advance for rewarding points  if this helps ,,,
Regds ,Digs....

Similar Messages

  • Planning book error during export

    Hello all,
          Once a week we export planning book to compute for the average base demand to be used for safety stock calculations. When we tried debugging the error we found this:
    /sapapo/clp 053  planning book and data view combination doesnt exist.
    we have tried running consistency checks but it didnt help. from what we can see, this error came right after changing the fiscal yr variants (periods for 2010 and 2011). from our checks when we pull 2010 there is no error but when we include 2011 we see the error. we have checked everything possible from planning area to storage buckets to fi yr variants but we couldnt tell what is causing the issue. we do not know what else might be causing this error.
    Colin

    Hi Kirankumar ,
    This is the problem more related to the defining Proportional Factor
    See <a href="https://websmp203.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=432360">OSS note 432360</a>
    Thanks in advance for rewarding points  if this helps ,,,
    Regds ,Digs....

  • Dump opening planning book - error "CNTL_ERROR"

    Hi Experts,
    One of our users is experiencing the Dump while opening the planning book - error "CNTL_ERROR".
    I found a similar thread but that is for version SCM 7.0.
    Can somebody suggest the GUI patch or a consulting note for SCM 4.1.
    Link for scm 7.0 = Re: Short dump in /sapapo/sdp94 Transaction
    Thanks a lot.
    Regards,
    chandan

    HI,
    To solve the issue apply the note 1279860.
    This note will correct the error.
    Regards,
    Sunitha

  • Planning - Recieving errors during configuration process

    Hello,
    We are currently installing System 11.1.1.1 using Weblogic 9.2 MP1. We have successfully installed and configured Shared Services, Workspace and Essbase. We have installed Planning but I keep recieving errors during the configuration process. The following errors are logged in the configtool_err.log file:
    Feb 10, 2009, 07:18:10 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, The specified database is already configured.
    (Feb 10, 2009, 07:19:59 AM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Error happen while trying to get Planning system DB info from registry.
    (Feb 10, 2009, 07:30:10 AM), com.hyperion.cis.config.servers.WlsAppServer, ERROR, WebLogic Admin server has not started after about 10 minutes.
    (Feb 10, 2009, 07:30:12 AM), com.hyperion.planning.HspDBConfigurator, ERROR, HP-9.5.0 product is not registered.
    (Feb 10, 2009, 07:30:13 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Deployment failed. Admin server doesn't started.
    (Feb 10, 2009, 07:41:35 AM), com.hyperion.cis.config.servers.WlsAppServer, ERROR, WebLogic Admin server has not started after about 10 minutes.
    (Feb 10, 2009, 07:41:35 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Deployment failed. Admin server doesn't started.
    (Feb 10, 2009, 07:50:05 AM), com.hyperion.planning.HspDBConfigurator, ERROR, HP-9.5.0 product is not registered.
    Any thoughts or information would be much appreciated.
    Thanks
    Tony

    Hi,
    What O/S are you installing on?
    Is it possible you can try and break down the configuration of planning.
    So only have Shared Services / Open Ldap Services running, make sure you can log into shared services console
    Run the configurator, choose planning > Configure Database (are you using a seperate database for each product, I am finding it helps with installations)
    If you are select the "Perform 1st Time configuration of Database" - Chose Drop and re-create tables"
    If successful move on to the configure - Deploy to application Server.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Planning Book Error (/SAPAPO/ADVX_MACROS_GET )

    I created a planning book and used /sapapo/sdp94  to enter into planning book
    when deleted using same transaction /sapapo/sdp8b , and now when i am trying to use trans code /sapapo/sdp94 ..its not letting me go in .
    It is giving  an  Internal error: /SAPAPO/ADVX_MACROS_GET
    When i use some other id and go to planning book through  /sapapo/sdp94 ..i am able to go there .
    Anybody knows about it . It would be highly appreciated and suitably rewarded

    Issue resolved . I recreated planning book with same name

  • Planning Book error

    Hi
    When my user is trying to edit a KF "A'', he gets an error saying he is not authorised to edit KF "B".
    He works normally everyday. Few times, he gets such error. There is no authorisation errors, as he works normally other days, so i ruled out that option. Where else, I should check for ? Not understanding this error. Surprisingly, it points to different KF B when he is trying to edit KF A.
    How this could happen ?
    Any suggestions ?
    thanks
    venkat

    Hello M,
    There are few default Macros in the dataview but not effecting KF B.
    and this error is reported by only one user. To think, security, why sometimes he is able to work, few times, he gets that error. (so i am ruling out the authorisation issue).
    When i took his SU53, it points to some macro 'Delta (KF C - KF D)' for activity 16.
    He is  basically getting this error, when he is copying bunch of rows (7 rows) and pasting in Pl book. But if he does only for single row copy and paste, he does not get that error.
    My main worry is why the error says no Authn for KF B. Why he is getting that error for all of the rows together not for single rows.
    any clues pls..
    Edited by: venkat babu on Oct 29, 2008 10:07 AM

  • Classic Planning application Error during Setup

    What is the SQL Command to FIX THIS ERROR
    no privileges on tablespace 'USERS'
    Unable to create Schema for application. Exiting Application Creation.
    Please advise

    Log into SQLPLUS
    GRANT UNLIMITED TABLESPACE TO <username>;
    e.g.
    GRANT UNLIMITED TABLESPACE TO planapp;
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error while loading the planning book

    Hi There,
    I am getitng the below error while loading the data in planning book
    "Error for COM routine using application program (return code 40,016)
    Error reading data - Planning book cannot be processed further"
    Ran  /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_LCM_REORG but its not working , still getting the same error.
    Could you please advise?
    Thanks,
    Krishna

    Hi Krishna,
    Looks like a key figure might be incorrectly created or there might be a problem in aggregation/disaggregation of key figures due to numerous number of CVCs.
    Regards
    JB

  • Error -- While Uploading Data into Planning Book

    Hi all...
    working on SCM 4.1...
    In Planning book...while loading the data of one SKU-Location into the PB , i am getting the below error...
    "Overflow during propagation calculation: Number too large"
    Message no. /SAPAPO/OM_TS078
    Diagnosis
    An overflow occurred while propagating a change to a key figure within the LCA routine.
    In this case an internal error in the LCA routine is concerned.
    *ProcedureCreate an OSS message as detailed in SAP Note 167280.*
    can anybody help me to resolve the same as i couldnot ablt to view the data in planning book for one of the Product-location.
    Regards,
    Rajesh Patil

    Hi Senthil,
    For Some of the SKUs it is giving the Error , some abrupt values are stored in Live Cache for these SKUs(CVC), thats why it giving the Error.
    The only solution is ..i have to delete the CVCs and create new one...
    But i will loose the data as we cant take the Backup of Old CVC data  --> Giving COM Error
    The reason of Abrupt  Values in Live Cache  Could Be -->.>
    Macro/Alerts
    How can we fix these types of Error , as regularly i am getting these Error??
    Is there any Note/Patch to overcome this issue?
    Will be GR8 if i will get the solution..
    Regards,
    Rajesh Patil

  • Activation of Planning Book and Macro's during Upgrade

    Hello All,
            We have copied all the planning books and macros from scm 4 to 7.
    When I try to login in my planning book with any selection it says 'An error occured during the generation of the macro program'.
    If I check the macro's for the planning in the macro workbench it says 'Macro(s) Was/Were Not Generated, Macro Book Was Not Saved'. Please let me know is there any to activate all the planning books and macros.
    Thanks,
    Siva.

    Hi Siva,
    I guess this is related to your other query. As mentioned there take a look at Note 1331066 which is part of SCM 7.0 SP 4.
    One easy way to determine the relevant notes by each application area is to check the Support Pack link as below
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/spat/index.htm?sp1=SAPKY70004
    You can then open each application area check for relevant notes for your issue. Use 70003, 70002 and 70001 to see the notes bundled in SP3, 2 and 1 respectively for SCM 7.0. The latest SP available for SCM 7.0 is SP5.
    Hope this helps.
    Somnath
    Edited by: Somnath Manna on Aug 25, 2009 2:41 PM

  • Error in updating ALV field catalog in selection tool for Planning Book

    Hi ,
    I am Implementing BADI  '/SAPAPO/SDP_SELECTOR' to upload Custom Fields Data in Planning Book Selection Window under APO Location Product. These Custom Fields are maintained in Custom Table.So from Table whatever Custom Fields are availabe all the fields needs to be available in for selection. Once selection is done the same data to be uploaded into Planning Book.
    This BADI is working Fine upto 4 fields but if any extra fields are added in the table 'Error in updating ALV field catalog in selection tool' error Pop Up is coming. Here i am using Folloowing Methods
    1). INIT_OBJECT_LIST
    2). F4
    3). LOC_PROD_VALUE_LIST
    Please help on the same if u have any idea or clue.
    Thanks.

    Hi Srinivas!
    Where did you get your implementation from?
    It would be nice if you could debug your code!
    For the F4 method, have you seen this note?
    Note 544904 - Sample source code f.BAdI /SAPAPO/SDP_SELECTOR ('F4'method)
    Also check this note. It contains selection modifications in the BAdI:
    Note 376902 - SDP selector: Basis corrections for BADI
    I do not know your release and support package in your SCM, but you can find a lot of notes related to this BAdI.
    Thank you!
    Will
    SCM Support Consultant

  • Error during the save process with Planning data form

    Hi,
    When in Planning web-client, I am trying to make changes to data on a data form. The cells are level-0 members (Yellow and writeable in a bottom-up Working version). When I save, it takes a while to process the request, then gives me the following error message: "There was an error during the save process."
    The data form is fairly large, could this be causing the problem? I am a able to save data on other forms that correspond to the exact same set of members and dimensions with no problem. What are possible causes of this error? I have tried stopping and starting planning and the entire EPM system. Thank you.

    Hi,
    I believe you are using V11, I would stop planning, clear out log \Hyperion\logs\services\HyS9Planning-sysout.log, start planning, replicate the error and then going in look if the log has any more detailed information.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Please can you help me? I have a Mac Book Pro with OS X 10.7.4 and my FaceTime doesn't open anymore. It appears this sentence:"the server detected an error during the elaboration of the registration. Please try later". What happens??

    Please can you help me? I have a Mac Book Pro with OS X 10.7.4 and my FaceTime doesn't open anymore. It appears this sentence:"the server detected an error during the elaboration of the registration. Please try later". What happens??

    Start the computer from the installation disk and perform Repair Disk and Repair Permissions using Disk Utility

  • Error in reading data from planning book

    Hi Guys,
    I am facing error in reading data from SNP planning book .
    When i try to read single product data for simulation version , it gets loaded correctly.
    However, when i try loading data for more than one product, then i get error "Product does not exist".
    I checked all products are assigned to model-version.
    I tried running consistency check as well and after it finished got message as "All inconsistencies can not be corrected".
    Please let me know if any one had faced this error.
    Thanks.

    Hi,
    Consistency check should solve the problem in this case. Try running it specifically on the version you are using. It should work.
    Regards,
    Guru Charan.

  • "Initial column cannot be generated" error when creating a planning book

    Hi,
    I have an error when creating a planning book with the planning book wizard. In the tab "data view", I enter values for the "Visible" and "Input" fields and validate. The following error is generated: "Initial column cannot be generated" and then "Maintain the time for the 'column visible from' field". I tried with different dates, and get the same error.
    I am running SCM 5.0.
    Any help would be greatly apreciated.
    Regards,
    Mikael.

    Hi,
    Generally these error come when we manually enter the value in the Visible and Input column. Instead we should try select value from the Drill down options which gets generated based on the Time Bucket Profile you have selected as input for Planning Horizon.

Maybe you are looking for