Planning Book Error (/SAPAPO/ADVX_MACROS_GET )

I created a planning book and used /sapapo/sdp94  to enter into planning book
when deleted using same transaction /sapapo/sdp8b , and now when i am trying to use trans code /sapapo/sdp94 ..its not letting me go in .
It is giving  an  Internal error: /SAPAPO/ADVX_MACROS_GET
When i use some other id and go to planning book through  /sapapo/sdp94 ..i am able to go there .
Anybody knows about it . It would be highly appreciated and suitably rewarded

Issue resolved . I recreated planning book with same name

Similar Messages

  • Dump opening planning book - error "CNTL_ERROR"

    Hi Experts,
    One of our users is experiencing the Dump while opening the planning book - error "CNTL_ERROR".
    I found a similar thread but that is for version SCM 7.0.
    Can somebody suggest the GUI patch or a consulting note for SCM 4.1.
    Link for scm 7.0 = Re: Short dump in /sapapo/sdp94 Transaction
    Thanks a lot.
    Regards,
    chandan

    HI,
    To solve the issue apply the note 1279860.
    This note will correct the error.
    Regards,
    Sunitha

  • Planning book error during export

    Hello all,
          Once a week we export planning book to compute for the average base demand to be used for safety stock calculations. When we tried debugging the error we found this:
    /sapapo/clp 053  planning book and data view combination doesnt exist.
    we have tried running consistency checks but it didnt help. from what we can see, this error came right after changing the fiscal yr variants (periods for 2010 and 2011). from our checks when we pull 2010 there is no error but when we include 2011 we see the error. we have checked everything possible from planning area to storage buckets to fi yr variants but we couldnt tell what is causing the issue. we do not know what else might be causing this error.
    Colin

    Hi Kirankumar ,
    This is the problem more related to the defining Proportional Factor
    See <a href="https://websmp203.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=432360">OSS note 432360</a>
    Thanks in advance for rewarding points  if this helps ,,,
    Regds ,Digs....

  • Planning Book Error during forcast voew

    When i am change the dataview  time bucket profile (i.e .Period structure settings) planning book for Monthly display of Data View instead of present view which is weekly an error pops up as:
    Period to date 31.01.2008 cannot be determined
    Message no. /SAPAPO/MA 120
    Diagnosis
    The system cannot interpret one or more of your data entries.
    Procedure
    Check the date parameters for this operation, and change accordingly.
    please suggest what to check to resolve the problem...
    thanks in advance

    Hi Kirankumar ,
    This is the problem more related to the defining Proportional Factor
    See <a href="https://websmp203.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=432360">OSS note 432360</a>
    Thanks in advance for rewarding points  if this helps ,,,
    Regds ,Digs....

  • APO Planning Calendar error /SAPAPO/CAL404

    Hello friends, I am working in the transaction /sapapo/calendar trying to change a Planning Calendar and when I try to Calculate the periods in the view "Calculation Rule" i got a error message saying: Factory calendar TU not found (message number  /SAPAPO/CAL404).
    I have looked into SCAL transaction and the factory calendar is OK created and valid.
    Thank you very much in advance.
    Regards.
    Ricardo Pereira

    Hello Senthil,
    Thank you for your help!!
    In the Time Stream I have changed the field Factory Calendar for another one for testing and it worked well, I mean I could caculate the periods using another calendar. Comparing both It's all the same there is no difference beteween them.
    But when I put the one that I really have to use (the correct one) in the time stream it gives the message Calendar not found. Although it exists and appears in the match code and If I get in the SCAL in APO as well as in R/3 I can edit it.
    I have checked the calendar parameters in SCAL and also the time zone including in one of the locations that use this time stream and it's all fine.
    Do you have any other idea?
    :O(
    Thank you very much indeed.
    Regards.
    Ricardo

  • Planning Book error

    Hi
    When my user is trying to edit a KF "A'', he gets an error saying he is not authorised to edit KF "B".
    He works normally everyday. Few times, he gets such error. There is no authorisation errors, as he works normally other days, so i ruled out that option. Where else, I should check for ? Not understanding this error. Surprisingly, it points to different KF B when he is trying to edit KF A.
    How this could happen ?
    Any suggestions ?
    thanks
    venkat

    Hello M,
    There are few default Macros in the dataview but not effecting KF B.
    and this error is reported by only one user. To think, security, why sometimes he is able to work, few times, he gets that error. (so i am ruling out the authorisation issue).
    When i took his SU53, it points to some macro 'Delta (KF C - KF D)' for activity 16.
    He is  basically getting this error, when he is copying bunch of rows (7 rows) and pasting in Pl book. But if he does only for single row copy and paste, he does not get that error.
    My main worry is why the error says no Authn for KF B. Why he is getting that error for all of the rows together not for single rows.
    any clues pls..
    Edited by: venkat babu on Oct 29, 2008 10:07 AM

  • Error while loading the planning book

    Hi There,
    I am getitng the below error while loading the data in planning book
    "Error for COM routine using application program (return code 40,016)
    Error reading data - Planning book cannot be processed further"
    Ran  /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_LCM_REORG but its not working , still getting the same error.
    Could you please advise?
    Thanks,
    Krishna

    Hi Krishna,
    Looks like a key figure might be incorrectly created or there might be a problem in aggregation/disaggregation of key figures due to numerous number of CVCs.
    Regards
    JB

  • SNP - Planning Book/Data View not showing up in /SAPAPO/SNP94

    Hi All:
    I created a planning Book out of a custom SNP planning area. While I could see the Planning Book in the list of Planning Book in the /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books)   I could not see the custom planning book in /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) .  I could ony see the SAP supplied PB there.  Will SDP94 transaction display only the standard SNP Planning book?  How can I make sure that the custom PB is displaed in /SAPAPO/SDP94?
    pl. help
    Thanks
    Ryan

    Hi Narayanan,
    a couple of simple checks..
    can you please check that you have not set a filter critera in the shuffler in planning book/data view?
    you can also check if by mistake only a limited number of users are assigned to this planning book and data view ?
    else you may want to check note : , 327371
    Let me if this helps.
    Rgds, Sandeep

  • TSCOPY:keyfigure copy one planning book to other book

    Hi,
    When i copying the keyfigure values from one planning book to othe Planning book through /SAPAPO/TSCOPY, the keyfigure is copying all the other keyfogure values also in the other planning book., I need to copy only one keyfigure row values to other planning book keyfigure row. Not all key figure values.
    I hope to get solution form APO DP experts.,
    Advance thanks for provide solution of my problem
    Regards,
    R K Sadasivam

    Hi Sadasivam :
    I think  you had placed a check mark in the box of Propose Key Figures While executing the TSCOPY transaction due to which it is triggering copy of all Keyfigures.
    Plz do not place this checkmark and manually chose the Key figure which you want to copy in source and target tabs.

  • APO: Interactive Demmand Planning - LOCK/UNLOCK Planning Book

    Hi forum,
    I need to lock temporaly a Planning Book in /SAPAPO/SDP94 in order to avoid users to be logged as a loading process is running
    do you know any standard transaction to do this or have another idea?
    thanks in advance
    Rasec
    Message was edited by: CESAR BENITO

    Replies:
    CESAR BENITO         
    Posts: 48
    Registered: 3/11/04
    Forum Points: 0
         Re: APO: Interactive Demmand Planning - LOCK/UNLOCK Planning Book 
    Posted: Oct 18, 2006 12:16 PM   in response to: Uma Maheswar ku... in response to: Uma Maheswar ku...           
    Click to edit this message...      Edit      Click to delete this message...      Click to branch this thread starting with this message...      E-mail author      Click to report abuse...      E-mail this message             Click to reply to this thread      Reply
    Thanks for your answer, Uma!
    I was testing Bapis that you mentioned and I think it's a radical solution because I would be blocking users, I just want to lock a planning book (users can keep logged in the system)
    Transaction /n/sapapo/sdpplbk does not guarantee that user can access to planning book (if he/she is smart )
    any suggestion?
    Rasec
    Somnath Manna   Moderator   SAP Mentor         
    Posts: 1,063
    Registered: 12/6/07
    Forum Points: 2,932
         Re: APO: Interactive Demmand Planning - LOCK/UNLOCK Planning Book 
    Posted: Oct 23, 2006 6:59 AM   in response to: CESAR BENITO in response to: CESAR BENITO           
    Click to edit this message...      Edit      Click to delete this message...      Click to branch this thread starting with this message...      E-mail author      Click to report abuse...      E-mail this message             Click to reply to this thread      Reply
    Hi Cesar/Rasec,
    If I understand correctly you want users not to change any data while some background job is being run. One way to handle this would be to lock and unlock the concerned planning area. This will prevent any users from making changes to the data in the planning area which should also mean your background job will not fail due to locks on data selection by users.
    For this you can develop customization to do locking and unlocking of the planning area. The function module ENQUEUE_/SAPAPO/E_PAREA can be used to lock planning area while DEQUEUE_/SAPAPO/E_PAREA to unlock the planning area.
    Hope this gives you some direction.
    Thanks,
    Somnath

  • Multiple attachment of planning books to planning area

    Dear all,
    I am facing an issue:
    When I copied the planning book in a planning area without making any changes I was not able to display the original book,
    In display I found that planning area of original planning book was changed and the copied book had the requried planning area.
    Please advise..
    Regards,
    Amol Chavan

    Hi Amol,
    Not sure if I understand your question correctly. But I guess you have got a planning area assigned in your planning book which you need to change. Goto Define Planning Book (transaction /SAPAPO/SDP8B) enter the planning book for which change is required. Then click on Edit (in the menu bar) >> Assign Planning Area. This will list the planning areas in the system and you can change the planning area suitably. Please note after this you need to go and check for the characteristics and keyfigures in the planning book and data view. These may be changed depending on the new planning area. Macros needs to be checked as well.
    Hope this helps,
    Somnath

  • Error in updating ALV field catalog in selection tool for Planning Book

    Hi ,
    I am Implementing BADI  '/SAPAPO/SDP_SELECTOR' to upload Custom Fields Data in Planning Book Selection Window under APO Location Product. These Custom Fields are maintained in Custom Table.So from Table whatever Custom Fields are availabe all the fields needs to be available in for selection. Once selection is done the same data to be uploaded into Planning Book.
    This BADI is working Fine upto 4 fields but if any extra fields are added in the table 'Error in updating ALV field catalog in selection tool' error Pop Up is coming. Here i am using Folloowing Methods
    1). INIT_OBJECT_LIST
    2). F4
    3). LOC_PROD_VALUE_LIST
    Please help on the same if u have any idea or clue.
    Thanks.

    Hi Srinivas!
    Where did you get your implementation from?
    It would be nice if you could debug your code!
    For the F4 method, have you seen this note?
    Note 544904 - Sample source code f.BAdI /SAPAPO/SDP_SELECTOR ('F4'method)
    Also check this note. It contains selection modifications in the BAdI:
    Note 376902 - SDP selector: Basis corrections for BADI
    I do not know your release and support package in your SCM, but you can find a lot of notes related to this BAdI.
    Thank you!
    Will
    SCM Support Consultant

  • Error -- While Uploading Data into Planning Book

    Hi all...
    working on SCM 4.1...
    In Planning book...while loading the data of one SKU-Location into the PB , i am getting the below error...
    "Overflow during propagation calculation: Number too large"
    Message no. /SAPAPO/OM_TS078
    Diagnosis
    An overflow occurred while propagating a change to a key figure within the LCA routine.
    In this case an internal error in the LCA routine is concerned.
    *ProcedureCreate an OSS message as detailed in SAP Note 167280.*
    can anybody help me to resolve the same as i couldnot ablt to view the data in planning book for one of the Product-location.
    Regards,
    Rajesh Patil

    Hi Senthil,
    For Some of the SKUs it is giving the Error , some abrupt values are stored in Live Cache for these SKUs(CVC), thats why it giving the Error.
    The only solution is ..i have to delete the CVCs and create new one...
    But i will loose the data as we cant take the Backup of Old CVC data  --> Giving COM Error
    The reason of Abrupt  Values in Live Cache  Could Be -->.>
    Macro/Alerts
    How can we fix these types of Error , as regularly i am getting these Error??
    Is there any Note/Patch to overcome this issue?
    Will be GR8 if i will get the solution..
    Regards,
    Rajesh Patil

  • Interactive planning book transaction error

    hello
    It is observed many times that even though user is assigned to any particular planning book
    user sometimes get an error,,,when hit /n/SAPAPO/SDP94..screen directs to change planning book screen
    looks like it is some type of inconsistency did any one come across this type of issue if yes any solution to solve the same?
    response appreciated
    Rgds
    SB

    hi SB
    The authorization object associated with display and change access in the planning book is governed by C_APO_PB. can you please check with this object is correctly defined in the roles assigned to the users. you may want check with your BASIS folks if the correct restrictions has been provided in the roles.
    Let me know if this helps.
    Rgds, Sandeep

  • Error in Planning Book

    Hello Experts,
    User is facing an weird error popup while entering in SDP94. User do not have access to load / change the data in PB. This issue is not replicable from our side.
    Error : "Graphics control could not be created; check method call"
    Please suggest the soultion to fix it.
    Regards
    Rahul Chitte

    Hi Rahul,
    Seems like authorisation issue.  I suggest you can involve
    basis or security team to fix the exact issue
    1) Check the user settings using /SAPAPO/SDPUSET
    2) Check assignment to planning book /SAPAPO/SDPPLBK
    3) Check su53 dump of user and compare it with your dump
    to find out the missing objects
    Regards
    R. Senthil Mareeswaran.

Maybe you are looking for