Planning book not saved

Hi
A profile assigned to a selection ID does not u2018sticku2019 ... the selection ID loses the fcst profile once it is called back up again
Basically when I assign a forecast profile in interactive planning - it is not being saved...
When I enter again in SDP94 I am getting blank screen. basically it should save the last screen we visit.
is there any process to stick back last visited screen. when we reopen the SDP 94.
Could any one guide me please..
Thanks
Anitha

Hi,
1)Load the planning book/data view
2)You load the selection in selection in planning book
3)Load the selection
4)Go to the change mode
5)Click the interactive selection
6)In the profile tab change the profile which you want to run
7)Run the forecasting cycle by clicking the button in top row
8)In the Profile tab save the profile by pressing save button
9)Save the data again by clicking the save button in the top row
10)Come out of interactive & reopen interactive
11)You can see the earlier master profile what you changes
Regards
Yogeesha

Similar Messages

Excel upload data to planning book not working

Hello Gurus,
i have checked the online resources first before posting this thread here as this is most old topic relating to upload of excel data to planning book key figures.
Here is what i have done so far
1) from the planning book, i chose a view and downloaded the file to desktop and saved it as CSV. i populated the key figure values and saved the csv file as-is back to desktop
2) i had to remove the hdeader from the file as APO threw back an error that it could not interpret the period (header) as the number
3) when i took out the header i simply pasted the values and the file was ok
4) i went to planning book, loaded the file, checked the file and it said that the data was read and i clicked on upload the file
5) everything was green, then but i do not see the values in the grid of the planning book
what else i'm missing.
can someone please help me
thanks
Ravi

Hello DB and Ada. Thank you for your valuable suggestions. I know i might be missing something silly here. If i keep the header that i downloaded from the planning book into csv file, i get an error while uploading the file back to planning book that unable to interpret 11/2014 as a number.
P11/2014 is the header, Period 11/2014 is the fiscal period. we plan in fiscal periods.
if i take out the header from the csv file and just populate the key figure values, then i do not get any error when i load the file back to planning book, but then the values do not show up in the planning book grid.
i'm keeping the planning book in the change mode while uploading the file as i got that error saying that i need to keep the planning book in change mode for the file to load data properly to planning book.
Thanks
Ravi

SNP Planning Book not showing Bucket Capacity

Hi,
I have a process in which for some materials subcontracting is required and this subcontractors are managed under SNP. We define the capacity of subcontractor in numbers. Bucket Capacity is defined in the Master Data of Resource of this subcontractors and it is not getting viewed in the planning book.
Can some one help me why it is not in Planning Book.

Hi,
Please run the planning area consistancy check and try the same with SNP planning book.Also check the live cahe version of the resource.Ignore if you already have done all these steps.
Also check the UOM of the bucket resource and the planning area UoM.
Hope this can help.
regards,
kaushik

Phone book not saving entries

i recently got my blackberry pearl and im having some problems with it
i go to my address book and its saying 'no addresses' so i put on in it and saved but when i go back to the address book it still says 'no addresses' so then i found out how to switch to sim card phone book and copy them to phonebook from there and it says it was doing it but then when i went back to phone book it still says 'no addresses'
how can i move my contacts from my sim to my adresses book without having to go in and find them in my sim card?
Solved!
Go to Solution.

You can do them all at one time, by accessing your SIM card at Address Book > Menu > SIM Phone Book > Copy all .
Then after, back in the address book, make sure at Address Book > Menu > Filters, that NO filters are checked.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Adress book not saving new card

Since Lion my adress book cannot save a new card any more.
This is what i do, i add or make a new card manually or from importing a .vcf file
it appears fine in the adress book.
It does not update to MobileMe nor to the iPhone when syncing and when i close the adress book app and reopen the card is no longer there.
i tried to delete the user/Library/preferences/com.apple.AdressBook.plist and
user/Library/preferences/com.apple.AdressBook.abd.plist
but no change
Any thoughts on what to try next?

Yes, i can add a contact on MobileMe and it syncs to my adress book EVEN if i close and reopen...
(THEN i can edit the card in Adress Book and it stays in Adress Book!)

Contact Photos in Address Book Not Saving

Hello,
I am suddenly unable to save a photo to a contact in Address Book.
I have run into a similar problem before, when Address Book stopped accepting changes to contacts altogether. I followed advice I saw on the web and deleted the .plist files for Address Book in the Preferences file in my Library. That worked like a charm. Now, that doesn't work.
I have deleted the files, restarted my computer, verified and fixed permissions using Disk Utility, and let my computer rest overnight by leaving it off. Nothing works and I've tried several combinations of order.
I am running Mac OSX 10.6.8 on a first generation Intel MacBook Pro. All software is up to date.
Thanks in advance for your help.
- Jeff

I found this article online:
http://reviews.cnet.com/8301-13727_7-20004209-263.html
Export an Address Book Archive of all your contacts, then import it right back in. Worked like a charm.

APO Cube data is not showing in Planning Book

Hi All,
Please help me with the following issue.. We use to load the data to APO cube manually from Flat file by executing BW (Backlog, Historical) reports every week. (not a good practice). That time Planning book was working fine.. And now we automated this process by creating the data marts from BW ODS to APO Cube and the loads are successful with process chain.. But I dont see cube data in Planning book.. In this process the existing info objects properties (Alpha has been removed) has been changed on APO side for mapping and loading purpose.. So when I load the data , the load is successful but I dont see the data in the Planning book(Note : the cube was refreshed and I guess I need to generate CVCs and do some thing in TSCUBE).. Please explain me the details steps. I am BW consultant and dont know much on APO.Present status i see the data in APO cube and not in Planning Book
Thank you
Arya
Edited by: karan s on Apr 3, 2008 8:58 PM
Edited by: karan s on Apr 3, 2008 8:59 PM

Hi karan
have you loaded the data from APO cube into the Planning book with TSCUBE ? you can add this step in your process chain also.
If you have made changes in the strcture of BW data mapping then you dont need to change CVCs.

Diffrence in data between the datasource and planning book

Hi All,
I have loaded the historical data from an infocube into my planning area then i generated the forecast. In our planning book we have provided some keyfigs like market intelligence etc.,. i have written a macro to add the baseline forecast and market intelligence and saved into a seperate keyfigure, i have defined the macro as a default macro and the macro execution is at "details only". everything is working fine in my planning book.
After extracting the data from my planning area into a datasource, the data is not matching between planning book and the datasource <b>only for the keyfigures which i have written macros.</b>
Please let me know where i have gone wrong and what are other settings to be made to replicate the same data into my datasource.

Hi,
Please note that system never execute the macro while extracting data from planning area to infocube.If you want that data to be saved it is
necessary to copy the values to a "non-calculated" liveCache keyfigure.
Each time, you will reenter in the planning book, the new value
calculated will be displayed, it won't be the real current value
from the livecache, it is not inside until you saved.
If you don't save this result, this is only visible on the grid but not
in the planning area and livecache.
Everytime planning book is opened the values for keyfigures which is calculated from macro are re-calculated. If you save these values and
immediately afterwards extract the data, those numbers will be the
same. However, maintaining new values in the planning book without
saving would result in "differences" ...
A DEFAULT macro is also launched while starting the Planning book.
Please read carefully the note #674238.
Regards,
Sunitha.

When printing a book to PDF, bookmark definitions are not saved

I recall seeing another post about this issue and I can't find it now, but none of the workarounds mentioned there worked for me, so here goes:
I am working on a book migrated from FM 9 to FM 11, and when I print to PDF, I specify the bookmarks I want to display in the Bookmarks tab of the PDF Setup for Selected Files dialog. The PDF prints fine, but when I want to print the book again, FM doesn't remember my settings, forcing me to set the bookmarks from scratch every time. This has proven pretty tedious seeing that I'm working with an old book in which the styles aren't intiutive, so trying to remember all of them every time isn't the best of fun. When I print a single file in the book, the settings are saved properly.
In the previous post, I remember reading that this was a bug in FM and trying the following suggested workarounds (none of which worked): Switching to structured mode; saving the desired setting in one file in the book, printing that document, and then printing the book (was supposed to result in FM remembering the settings for the entire book); saving the book right after it prints; selecting all files in the book and saving as PDF, as opposed to selecting the book and then File > Save as PDF.
I'd be glad to know if anyone has any ideas, or if Adobe are planning to post a fix for this issue.

It is my understanding that FrameMaker uses the setting stored in the first document of the book when creating a PDF from a book. So, open the first file in the book and make a PDF, setting your bookmarks as you want for the whole book. Then create the PDF of the book. Check the settings before you click Print to make sure they are what you want. You may have to make a few changes, but it should remember them the next time.
I work with FM 9, so this may not be relevant to FM11. I find it necessary to open the PDF settings dialog each time I make a PDF of a book, and click Save/OK/whatever, to make sure the bookmarks are created correctly. The settings are always correct, no changes needed; but I find it necessary to open the dialog and close it to get the bookmarks correctly indented in resulting PDF. It may have been fixed in FM11.
Van

Unusual behavior in planning book at the time of saving data

Hi Experts,
I am having a problem that in the planning book when I try to save the data accordingly:-
a) Enter the data and then press save button and then click the save button:- In this case the data is getting saved.
b) Enter the data and then without pressing the enter button directly press the save button:- In this case the data is not getting saved.
Kindly guide what could be the reason.
Thanks.

The issue is resolved ow.

Purchase requisition date in SNP planning book and product view not in sync

Hello Experts,
We have an issue with display of purchase requisition date in SNP planning book.
We are manually entering the PR's for a perticular week from Monday - Sunday(01.09.2014- 07.09.2014), when the last PR is entered on 07.09.2014, it does not appear on the same day in planning book(cell becomes empty) and moves to 06.09.2014, thus quantity on 06.09.2014 is the summation of the quantities present on 06th and 07th.
The PR dates are appearing correct when we click on display details in planning book and they are correct in product view, MD04 as well.
Additionally, this is the same date on which daylight saving time comes into effect.
Kindly advise if anyone has faced similar situation earlier.
Many thanks,
Aditi

Hi Aditi,
Check the time zone that you have in your location in ECC and APO.
Also note it is recommended that you maintain the same system time zone in APO and in ECC. (check tcode STZAC in both systems).
Different time zones should generate this kind of inconsistencies.
Kind Regards,
Mariano

Statistical Forecast not saved when generated with background planning job

Hello All,
The system I am working on is SCM 5.0 Support pack 15.
When I execute the planning job in the background to generate a statistical forecast, the job completes sucessfully, I have a spool that shows the forecast profile was executed (Auto Mod 2) with the appropriate model messages and the last two messages are 'Data saved successfully' and 'No data has been changed; data must not be saved', but when I go into interactive planning to view the forecast, there is no forecast in my key figure.
My planning area has the forecast settings maintained for Statistical Forecast, Corrected History, and Ex-Post Forecast key figures. My forecast profile is looking at the History key figure and Statistical Forecast key figure. My time series has been initialized for 36 months of History and 18 months of forecast. My planning book is set to have the Statistical Forecast Key figure as output only. My activity and planning job are set to execute in the appropriate planning book (in order to see the forecast alerts I have selected) with the specific selection profiles (no navigational attributes), and the aggregation level set (no navigational attributes).
The only way for me to see a forecast is to change the Statistical key figure setting in the planning book to output/input, execute the forecast job in the background, and then go into interactive planning. Am I missing something? Any help you could provide would be greatly appreciated.
Regards,
Roxane H.

Hello Senthilrajan,
I have executed the forecast in the foreground using the same planning book as the background job and same forecast profile (Auto Model 2)with a selection from the batch run (pulled a selection from the spool list) and it generated a forecast with the same messages as my background job except for the last two lines (Data saved successfully and No data has been changed, data must not be saved) that I was able to copy back into interactive planning. I then used this selection in the background job to execute the forecast in the background and did not see a forecast in interactive planning and received the same messages as before -
Data saved successfully
No data has been changed, data must not be saved
The reason we run the forecast in this book is to allow our Demand Planners to view the forecast alerts by book and/or selection directly in interactive planning instead of having to get their from the Alert Monitor. It has worked in the past and is currently working in the same environment just with a different planning book, selections, forecast profiles, and data. It generates a forecast with no 'No data has been changed, data must not be saved' message and the forecast is written in the key figure and is viewable in interactive planning with out manipulating the key figure to be input/output (it is set to output only).
Any further assistance you can provide would be greatly appreciated.

SNP - Planning Book/Data View not showing up in /SAPAPO/SNP94

Hi All:
I created a planning Book out of a custom SNP planning area. While I could see the Planning Book in the list of Planning Book in the /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) I could not see the custom planning book in /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) . I could ony see the SAP supplied PB there. Will SDP94 transaction display only the standard SNP Planning book? How can I make sure that the custom PB is displaed in /SAPAPO/SDP94?
pl. help
Thanks
Ryan

Hi Narayanan,
a couple of simple checks..
can you please check that you have not set a filter critera in the shuffler in planning book/data view?
you can also check if by mistake only a limited number of users are assigned to this planning book and data view ?
else you may want to check note : , 327371
Let me if this helps.
Rgds, Sandeep

Items available in CVC not in planning book

Hi Team,
we are facing some error... we need to activate some new products in the forecasting process so the items are already transferred to SCM .Items are available in SCM data base and even in CVC but it not reflecting in the planning book.
Pls help me to solve it.
Regards,
Vijesh

Hi
After looking into your response, I tried to reproduce the scenario in my system. However, the master data maintained using RSDMD (with or without nav attributes) being reflected immediately in /sapapo/mc62.
Have you checked your infoobject and master data activation status? May not be a valid question as you already mentioned that other InfoCube can show the added value.
Probably, executing report RSDDS_AGGREGATES_MAINTAIN might fix the issue. Pl check.
Thanks
Ankit

For requirement strategy 30 forecast not seen in planning book

Hi Experts,
I am using planning strategy 50 in ECC and same has been transfered to APO as 30. Just to test scenario I have entered manually forecast in product view and created sales order in ECC which is CIFed to APO. Now as per SAP guide, scenario works fine in product view, where sales orders consumes forecast and shows remaining forcast after consumption.
But the remaining forecast and sales order is not seen in SNP planning book. Any suggestions?
Best regards,
Vaibhav

Dear Vaibhav,
I have a basic question ? Strategy group 50 in ECC comes to APO as Requirement Strategy 30 ..
But it is a Make to Order strategy .
Do you think that it is logical to plan /Forecast a make to order product?
You can enter a forecast in product view , system will not stop you.
If you click on the item it will show as make to order planning segment.
So, I dont think that you can forecast .
whatever you see the product view cannot be seen in the planning book.
Regards,
Srinivas.S

Planning book not saved

Similar Messages

Maybe you are looking for