PLANNING BOOK (SDP94) KEY FIGURES EDITABLE MODE SETTINGS

Hi,
I am unable to get editable mode of one of the key figure(Distribution receipt confirmed) of SNP planning book using t code SDP94. Kindly help me out in getting the same.
The following are the details which i tried:
Opened SDP94 in change mode and clicked on design mode. Then right clicked on the Key figure, activated input/ouput mode and then saved.. Still i am unable to enter into the change mode of SDP94 of that key figure.
Regards
KPNMurthy

Hi Aparna,
Sorry for the delayed reply. After thorough investigation with our business people, we have come cross with different solution, instead of creating a new Zfigure which occupies more database. Thanks a lot for your prompt reply. Rewarding you for the same.
Regards
KPN Murthy

Similar Messages

Flexible Planning:User defined Key Figures

We had created custom fields and included in custom table to be used in field catalogue.Canwe view this table as source table ?If so what has tobe done to view this as source table?

Dear colleague,
it depends on which application do you use. Each Module has its own table to introduce the customer fields. PLease follow the below stps which are an exmaple for PM module. IF you work with other application , you have to find the Append in which introduce your fields.
For example:
MM uses MCBEST or MCMSEG,--> MCMSEGUSR
PP uses MCAFKO or MCAFPO..>MCAFKOUSR
SD uses MCBVAP-> MCVBAPUSR , MCLIPS, MCVAK,
Find the useful include of your application,
Once you have the valid table to introduce the fields, you can use the following steps for you application instead of PM:
If you want to update key figures as self-defined value or quantity key figures in the Information System, you must define them as fields in the communication structure MCIPMCO based on the data elements you have already defined. Because you should not change the communication structure MCIPMCO as a SAP standard object, you must define an append structure for the structure MCIPMCOUSR, which contains all self-defined key figures. You can make this definition in the data dictionary.
Procedure
Choose the menu bar sequence Tools ® ABAP Workbench ® Development ® Dictionary on the SAP initial screen.
This brings you to the initial screen for the Dictionary.
Select Structure and enter MCIPMCOUSR.
Choose the menu bar sequence Dictionary object ® Change.
Choose the menu bar sequence Goto ® Append Structures on the Structure screen.
A dialog box appears.
Enter the name of the append. Make sure that the name of the data object begins with Z as defined in the naming convention for customer objects.
Choose Continue.
On the screen Table/Structure: Change Fields, you can enter the description of the append and define the fields. You should ensure that the names of the fields begin with ZZ and contain no more than 10 characters. Use the active data element you have created to define field meaning and attributes.
As these are either quantity or value fields, you must maintain the reference to a unit. Position the cursor on a field name and double click. Then enter the following data:
Reference table: MCIPM
Reference field: WAERS
If the field has the data type CURR.
Reference table: MCIPM
Reference field: SUNIT
If the field has the data type QUAN.
Choose Copy.
Choose the menu bar sequence Table ® Activate if you have edited all fields.
I hope it helps.

APO DP - use of key figure change mode 'Redisaggregate'

I am using the macrobuilder in APO DP V5.
Here one can use a 'redisaggregate' change mode for a key figure.
But what is a practical example where this could be relevant and useful?
Thanks,
Bob Austin, Atos Origin

Srinivas,
Thanks for this.
I now understand the concept.
But what does the 'redisaggregate macro' look like?
Suppose I have key figure X with disaggregate key figure APODPDANT.
I have a fcst run at high level, and I recalculate APODPDANT.
What is the structure of the macro to now apply the new APODPDANT values?
Is it something like key figure Y (change mode = redisagg) = key figure X?
Thanks,
Bob.

Key figure Attributes not working

Hi ALL,
We have an isuue with one of our Planning book. Key figures which are supposed to be open for editing are showing as output only and key figures which are for output only are showing as open for editing.
I went to design mode to tried to change in manually , if I chane one row attribute all rows are getting changed.
I found a macro which assigns Key figure attributes which I tried to activate but still not working. We are using SAP SCM 4.1 Version.
Can any advice on this?
Sivarama

Thanks Problem is now solved. Looks like some has made changes in the design and there are macros which are working and as you said they might be conflicting. I changed the design which was working weired yesterday when I tried to cande one row attribute and all rows are getting applied, this worked fine today. And I deactivated the macro which is working on some row attributes and activated again.
I am not very clear what went right but working.
Sivarama

How to upload flat file in planning book

Hi,
Can anyone tell me how to upload flat file(e.g xls, csv) in planning book against key figures(e.g forecast) in some characteristics level(e.g brand, sku etc)?
Is it possible to have screen shots or path to follow?

Hi
Yes you can upload the excel files or flat files in APO planning area. APO planning area is made of characteristics and key figures. All the characteristic information is mainly available in Infoobject. You can upload these excel files in infobojects which will than reflect in planning book. Please find the detail information regarding APO BW building blocks.
http://help.sap.com/bp_scmv250/BBLibrary/documentation/DPL_BB_ConfigGuide_EN_DE.doc
Please go through the section 2. Setting up APO BW which will tell you all the details steps.
Please remember to activate the infoobject once you load the data.
I hope this will help you.
Thanks
Amol

Issue in capturing in transit in SNP interactive planning book

Hi,
We are facing issue in capturing in trasit in SNP interactive planning book.
We are using standard planning area ( 9ASNP02) on which we have build up planning book which is copy of standard planning book. Earlier standard planning area was containing key figure 9AITRAN(in transit)attached to category group (IT1) which contained categories AH, EI.
As intransit was coming under category CS we added category in category group IT1. After adding it the intransit is not visble in planning book in key figure in transit but when we checking details of cell the value is present with start and end date as 01.01.1970 where as in RRP3 view intransit is present under current date.
Before additing category CS in IT1 group the intransit was not coming but now after adding category also the in transit is not visible in cell but present in detail view with wrong dates.
Regards,
Vrushali.

HI,
Stock in transit keyfigure will display only EI orders (incase of VMI
scenario) and AH orders (if you create inbound delivery).
If you integrate stock,CS orders only will be available in /sapapo/RRP3.
The root of the problem is in the setting from Intransit key figure:
from a planning area management point of view it reflects
the setting used in the standard SNP planning area but the customizing
of the category group used there is different from the one used in
standard systems.
Actually you added category CS there. But category CS has a atp category
type 0, which means stocks actually. In the SNP planning books by design
stocks are read separately from other orders because have to be
considered in the ATD computation.
Therefore if you need to read orders with category CS you should
consider it in the category group assigned to the ATD receipts key
figure and to the stock key figure.
This customizing could be applied at the planning area level, as
described above or at the master location level, SNP tab.
In this case you can specify there the category groups which have to be
used in order to consider stocks, ATD receipts and ATD issues about all
products assigned to the used master location. Please refer to the
related F1 helps in order to get more information about.
You can get more information at note 591310.
Regards,
Sunitha

Adding new key figures to DP planning area

I am using APO DP.
When adding new key figures to a planning area, is there any way of avoiding having to deinitialise and then re initialise the planning area?
Thanks for any advice on this...

First of, let us know which version of DP are you using.
If you are using 7.0, all you need to do is right click on your planning area and select Change Keyfigure setting and you should be able to update the key figures there.
The below is from SAP help for SAP APO 7.0, you should be able to add the key figure without deinitializing the planning area.
Key Figure Settings
Here you can change the properties of the key figures of a planning area, if the planning area has already been initialized. You can also add or delete key figures. However, you can only delete key figures that are no longer used in planning books, data views, macros, or demand forecasts. You can find out in which objects a specific key figure is used with the where-used list.

How To Add New Key Figure in Manual Planning

Dear All
Please Help
I Already implement BPS for 2 year.
Now user want to add new key figure in Cube.
I already add new key figure to cube and activated it.
But in Manual Planning, The new key figure not show in selection
what I must do?
Please Help.
Thanks

Hi,
not all key figure types are supported in BPS.
1. All key figure types must have aggregation SUM, SUM.
2. Supported key figure types:
- amout
- quantity
- number (integer, float, dec)
- time, only type DEC
- datum, only type DEC
All other key figures are filtered out and are not available in BPS.
Regards,
Gregor

Urg:Dos windows settings (Quick Edit Mode)

Hi All
I want to disable the DOS Windows Quick Edit Mode settings while launching my Java application.Is there anyway so that I can disable the DOS windows Quick Edit Mode settings from command while running my Java Program.This is reqd as my java application hangs and keeps waiting if someone presses mouse click for copying in the dos window.
Any help apprecaiated
thx
Raj

Hi
With javaw the dos console still comes up for the first time and if i close it the javaw.exe keeps running in the background.
So I would expect that dos console not come up for the first time also.Also when I use javaw -help it gives me an error pop up message.
By the way I modified the sortcut batch file for my java appln and then in the dos window the qick edit mode is disabled.
If u have any other idea its apprecaited
Thx
Raj

Key Figure in a Input Ready Query

I have 9 key figures in my input ready query. 5 of them are not input ready and being loaded through a job and 4 are input ready. There is a problem with one key figure, I am able to see data for the key figure when i have START QUERY IN THE CHANGE MODE turned off. But once I turn it on it is not showing any data for the key figure. This is happening only wiht that key figure, all the other key figures are working fine. Could someone help fixing this
Thanks
Rashmi.

Hi,
I do face this type problem during my BI IP implemenation project. Pls chk thoroughly the following points.
1.The planning mode of your real-time infocube should be on always on( you need change from load to planning mode, while inputting data).
2.The START QUERY IN THE CHANGE MODE , should be on.
3.In the planning tab of key figures, ensure you enable the button : Data can be changed using planning functions.
4.In the advanced tab of key figures, pls make sure to enable the right button( Master data).
5.Pls make sure , the real time infocube, aggregation levels, filters etc, should be refreshed & active,if make any changes in planning model in between, in Aggregation levels,filters etc.
6. Pls chk the locks( SM12) always, and delete all of them, if any.
7. Log-off the Server (BEX/DWWB) and restart the BEX ,then open your Input query, it should work .
Regards
CSM Reddy

Disaggregation of Key figure not in proportion at monthly bucket

Dear Expert,
Please find the below case.
Here Key figure 2 is disaggregated based on Key figure 1 (Calculation Type P) also we maintained Time based disaggregation K.
The issue is - if you check total, it is 13 for both key figures as shown in below screen shot.
But region wise (Detail level) if you checked, it is not in 1:1 proportion and it is causing problem for us.
For example Region 2 having value in KF1 as 2 for Week 11.2015 but after disaggregation it got nothing on KF2.
(The reason is Key figure 2 is having value in week 12 and week 13 and nothing in Week 11)
We tried 2 different approach to get 1:1 proportion in Monthly bucket, but it could solve our problem.
Approach 1-After Key figure2 calculated in Weekly bucket, Reset Key figure 2 at total level in Monthly data View and enter the Total of Key figure 2 at Total level in Monthly bucket.Check the result at detailed level.
But in this case it is calculated for week 10, 11, 12 and 13 as 0, 9, 3, 1. (We want Key figure2 as per original calculation i.e it should be 12 and 1 in week 12 and 13 respectively)
Approach2 -
Approach 2 - Add another New Key figure as Key figure 1 Total- which sum the Key figure1 at detailed unit at Month level and then disaggregation of Key figure2 based on this new KF.
Its working for this scenario but different scenario is not working.
For example- here region 3 and 4 affected.
If disaggregation at Month level is corrected, our issue will be resolve.
Waiting for your feed back.
Thank you
Sachin

Hi,
In Planning Area u2013 Key Figure settings, did you try to use u2018N - No disaggregation in timeu2019 for KF2 key figure ?
This will mean that copying will occur in technical periods of the storage bucket profile and not the way it happens now.
Other option:
Now, you storage bucket profile and also the planning bucket proifile are in Days/Weeks/ .Months
Is it necessary for your user to view data in daily buckets ? Can the user view the data in weekly buckets only (and not in daily buckets) ?
Your planning bucket profile can be in Weeks/..Months .
This way your displayed data will be in weekly buckets.
Regards
Datta

APO Cube data is not showing in Planning Book

Hi All,
Please help me with the following issue.. We use to load the data to APO cube manually from Flat file by executing BW (Backlog, Historical) reports every week. (not a good practice). That time Planning book was working fine.. And now we automated this process by creating the data marts from BW ODS to APO Cube and the loads are successful with process chain.. But I dont see cube data in Planning book.. In this process the existing info objects properties (Alpha has been removed) has been changed on APO side for mapping and loading purpose.. So when I load the data , the load is successful but I dont see the data in the Planning book(Note : the cube was refreshed and I guess I need to generate CVCs and do some thing in TSCUBE).. Please explain me the details steps. I am BW consultant and dont know much on APO.Present status i see the data in APO cube and not in Planning Book
Thank you
Arya
Edited by: karan s on Apr 3, 2008 8:58 PM
Edited by: karan s on Apr 3, 2008 8:59 PM

Hi karan
have you loaded the data from APO cube into the Planning book with TSCUBE ? you can add this step in your process chain also.
If you have made changes in the strcture of BW data mapping then you dont need to change CVCs.

SNP Planning book - Period Information Setting Issue

Dear All,
In SNP Planning book we have issue related to "Period Information" for
the buckets. The period labelling is not working properly.
Actually when we go to the SNP planning book and change the Period
Information Settings(refer attachment). Once Period Setting is changed,
it gets changed to all the users(globally). So it is behaving as if it is not
user specific settings.
Scenario is - Suppose I changed the Period information in SNP Planning
book to appear in particular format, and when other users goto SNP
Planning book their Period Information Setting gets automatically
set to the same format which was I changed to, and vice-versa.
FYI - We do not have - Use-Exit implemented for Period Setting.
Appreciate any input in this regard.
Thank you
Satish Waghmare

Hi Pawan
Thanks for the reply.
Here is what SAP has to say, this is as per reply to my OSS message.
Question- The period information settings cannot be
made user-specific; there is no customization possible. right?
SAP Says-------> Regarding the period information settings, there is really no
customization to achieve the result, unfortunately.
Question- When you goto Design of the Planning Book, inside the Dataview Tab,
Period Labelling field shows value as "A", However F4 drop-down list do
not contain u201CAu201D value for the selection. Only possible values in F4 drop-
down list are Blank, U, Z, B and E. Could you please clarify this?
SAP Says -
> Regarding the period labeling values, the 'A' value is blank in the
selection because you can also leave it blank for the system to use the
'standard labeling' option.
Sharing it for for everyone's benefit.
Thank you
Satish.

Key Figures and Aggregation options

Hi All,
There are three aggregation options:Minimum,Maximum,Sum on the Aggregation Tab when creating a Key Figure on the Admin Work Bench. I understand that these aggregation rules are set for the Key figure BEx default settings. Does this affect at all how the data is loaded into the cube?
Another question. If I have a Key Figure that I have set to Maximum, and would like to change to Sum.. Do I need to unload the data in the cube and load it again?
Thanks.

> There are three aggregation
> options:Minimum,Maximum,Sum on the Aggregation Tab
> when creating a Key Figure on the Admin Work Bench.
> I understand that these aggregation rules are set for
> the Key figure BEx default settings. Does this affect
> at all how the data is loaded into the cube?
Indeed: these are report relevant settings only.
> Another question. If I have a Key Figure that I have
> set to Maximum, and would like to change to Sum.. Do
> I need to unload the data in the cube and load it
> again?
I'm not sure about this one: Since it's a report-relevant setting only, i wonder there would be a reason why all the cubes where the KF is used should be empty...
(you can always change the setting directly in table RSDKYF, field AGGRGEN)

Key figure display in planning book with respect to Time bucket profile

Hi,
I am loading a key figure to planning area from the info cube for the current month. When I review the key figure in planning book with monthly time bucket profile it shows 85 for the current month. In the same planning book with weekly bucket profile, it shows 55 from the current week and future weeks and the remaining 30 goes into the past weeks of the current month.
How to make the total quantity 85 to show in the current and future weeks only.
thanks and regards
Murugesan

Hi Murugesan,
Within the Planning Area, the data is stored at the lowest level granularity that you maintain in storage bucket profile. Then during display, system will decide what data to show depending on what kind of time bucket profile you use in the planning view, and the time based disaggregation that you maintain for Key Figure.
In this below case, what time characteristic do you have in cube? Is it date, week or month?
If it's date, check how much KF data is maintained on the dates which belong to week which has days both in this month/last month e.g. if I talk about Dec 2011, how much data is stored 1,2,3 & 4 th of Dec, 2011.
This data would appear in Dec in monthly view, but in week, it would appear in the week starting 28th November.
If data is maintained in cube in weeks, then you need to calculate how time based disaggregation would show it to you in months.
If it's months, then you would need to find out how much data would go to the days in the past week of the month.
The time based disaggregation may be causing you some issues, but in that case, I would not expect 30 out of 85 to go in the past week, unless you have data in cube in days.
Data shown in weekly view for week starting 28th Nov should ideally be a small proportion of 85, unless you are using a time stream/fiscal year variant, due to which most of December is in holidays. The only other exception I can think of is that you have data in teh days mentioned above.
It would be best to help the business understand this disaggregation logic, rather than thinking of manipulating the data to shift to a later week.
If this logic doesn't explain your situation, then please provide the date/week/month at which you have data in cube, and what quantity.
Thanks - Pawan

PLANNING BOOK (SDP94) KEY FIGURES EDITABLE MODE SETTINGS

Similar Messages

Maybe you are looking for