Planning Book  View

Hi Experts
I need your valuable advice on the following requirement:
We are using APO DP , as my users are interested to have  Web based screen for the planning book by using ABAP Dynpro instead of Interactive Demand Planning.
I have following queries with regard to the above requirment:
1) Can Users can generate Statistical forecast in the web Screen and play around with the Strategies , forecast Accuracy Measurements?
2) Can users can drill down product with all levels of detail?
If any other restrictions please let me know.
Your advice is highly appreciated.

Hi Kanth,
This is possible to implement Web based screens  for the planning book by using ABAP Dynpro instead of Interactive Demand Planning.
using MVC
It  is possible to your specification
Regards,
Pullaiah

Similar Messages

  • Synchronisation of two tables in an APO planning book view

    If one has 2 separate tables/grids in an APO planning book data view, is there a way of making them move synchronously, so that if the user moves say x buckets in a direction then this applies to both tables?
    Thanks for any advice...

    Unfortunately no but would be very interested to know if someone has come up with any enhancement (has to be GUI related).
    Somnath

  • APO DP planning books - use of 2 grids in view

    I am using APO DP V5.
    I know that it's possible to have 2 grids in a planning book view.
    Can anyone give good examples of where 2 grids have been found to be useful?
    Would it be possible to have 1 grid for 'forecast' and 1 grid for 'history'?
    Thanks,
    Bob Austin

    The definition of two grids in a data view (not sure if you mean that by planning book view) is only possible when creating a data view for the first time. Once a data view is created you cannot add the second grid as the Table 2 option is grayed out under Title section of Data View tab.
    Good example of using 2 grids is while using DP BOM functionality and also in those cases where the top grid keyfigures are to be drilled down but the bottom grid keyfigures remain at aggregate level. So if you want to compare the forecast numbers in detail with the total budget then use the total budget keyfigure in Grid 2. Remember while drilling down, keyfigures in Grid 2 are not drilled down.
    In you case of having forecast in one grid and histroy in another can be effective since the data in the keyfigures are in two different time horizons. But remember if you have history in Grid 2 then the data will be aggregate (assuming you have loaded multiple CVCs) and will not be drilled down which the Forecast keyfigure in Grid 1 is drilled down to lower levels.
    Hope this helps.
    Thanks,
    somnath

  • Rename & deletion of planning book & Data view

    Hi Experts,
    Is it possible to rename & deletion of planning book & Data view, if yes what is the procedure.
    Also suggest if hiding of same is possible

    Hello  jrd333
    You can delete planning book/data view via transaction /SAPAPO/SDP8B
    There you can choose PB/DV that needs corrections.
    Also you maybe need to deactivate your planning area to wich this PB is assigned.
    You can do this in transaction /SAPAPO/MSDP_ADMIN
    This things is related to custom Planning Books/Views.

  • SNP - Planning Book/Data View not showing up in /SAPAPO/SNP94

    Hi All:
    I created a planning Book out of a custom SNP planning area. While I could see the Planning Book in the list of Planning Book in the /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books)   I could not see the custom planning book in /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) .  I could ony see the SAP supplied PB there.  Will SDP94 transaction display only the standard SNP Planning book?  How can I make sure that the custom PB is displaed in /SAPAPO/SDP94?
    pl. help
    Thanks
    Ryan

    Hi Narayanan,
    a couple of simple checks..
    can you please check that you have not set a filter critera in the shuffler in planning book/data view?
    you can also check if by mistake only a limited number of users are assigned to this planning book and data view ?
    else you may want to check note : , 327371
    Let me if this helps.
    Rgds, Sandeep

  • Planning Book Macro which can read different key figures from data views

    Hi Experts,
    I am looking for help to create a Planning book level macro which is having capabilities to read different Key Figure across the different Data Views. For example DataView 1 has Sales Orders and Data view 2 has Forecast and I want put in Data view 3 the netted numbers from SO and Forecast.
    Please provide me some quick pointers.
    Regards,
    Rahul Mohnot

    Hi,
    Not only is it the easiest way, it is the only way to do it as Laurence has put it. As you can see, macro workbooks are created for a Planning Book/Dataview combination.
    Thanks
    Mani

  • View db alerts generated in planning book A from within planning book B?

    Hi,
    I have a db alert macro implemented as a default macro in one of our SNP planning books/data view. This is correctly generating db alerts per the criteria coded into the macro. In Alert Monitor, the database alerts show the planning book (book A) and data view (view 1) from which the alerts were generated.
    The planners monitoring this specific alert do not have/should not have access to planning book A and data view 1,  but will have access to a different planning book (B)/data view (2) within the same planning area.
    Is it possible to generate a db alert from a default macro residing in planning book A, data view 1 but have the db alert as viewed in Alert Monitor display a different planning book (B), data view (2) so that when the user launches Supply Network Planning by right clicking on the db alert, the user is taken to planning book B, data view 2 with the alert selection loaded?
    In short, I need to generate db alerts via a default macro in one planning book/data view but must enable planners who monitor these alerts to do so in a different planning book, data view -- all within the same planning area.
    I saw an earlier thread (id 4517019) that seemed to indicate this was possible to assign db alerts generated in one planning book to another planning book,  but it was not clear how to implement this. We are on APO version 4.0. In the macro's Alert/status element properties I do see a section called 'Different Source' which allows me to specify a different planning book and macro. However, I do not understand how this is meant to be used and whether this will be useful to me.
    I would appreciate any help you can offer.
    Thanks!
    - Heidi

    Saradha,
    Thank you for your reply! I checked the various versions of SAP help and found that only as of Release SCM 4.1 can you assign the alerts that are generated in a planning book/ data view to another planning book/data view via the mechanism you explained.  That tells me that perhaps in SCM 4.0 there is no straightforward way of doing this.
    In 4.0, when I double click the macro alert element I see different attributes - one of them is in a section titled 'Different Source' and contains to fields - one that allows you to specify a planning book and the other to specify a macro in that planning book. I'm experimenting with that now to better understand what it's purpose is. If you have any idea, please let me know. Otherwise, thanks very much for your response!
    Thanks,
    - Heidi

  • In Planning Book fo DP how do I change desing view of Selcted objects part?

    Hi All,
    Can anyone advice how I change view of Slected objects which is on left side top of planning book.
    When we open planning book and use selction to select display divisiona and select all Divisions , in selected object box all divisions are displayed as 1,2,3 in 3 columns. Now we want this to change and change one column as description and provide description of division.
    Can anyone show me process of how do I do this.
    Thanks
    KV

    Hi KV,
    Above the selection area you can find Choose selection fields button if you select that the following fields appear in the popup.
    Field for any characteristic value (external display)-CHAVLEXT
    Field for any Characteristic Value-CHAVL
    Short Description-TXTSH
    Medium Description-TXTMD
    Long description-TXTLG
    You can have a CVC formate whre division description also ceate. or
    You need to create a info object create infoprovider and assign this infoobject. create info source and extract these fileds from ECC.
    Regards,
    Kishore Reddy.

  • Graphic view when entering SDP94 planning book

    Hi,
    do some of you know if there is a possibility for setting the DP planning book up, so it always will start with the graphic view ??
    Instead of starting with the table view
    This only for single users ???
    Thanks in advance
    Jan Juhl

    Hi Jan,
    You can achieve the same by going into the design mode of the data view from the interactive planning book. Then Click on the top left cell with the right mouse button to pull down a menu. Then Check the graphic option. Save and come to live. It will dispay the graphic option as a default everytime you open the planning book.
    In case you do not want table view at all in the data view, you can go to design view and click the layout button on the top. Then unflag the Table view. Save and come to live mode. The data view can show graphic dispaly only.
    Let me know if it helps.
    Regards
    Gaurav

  • Planning book: Data views

    Hello:
    I am defining a planning book and I want to have the same data views (total demands and total receipts) of standard pl.book 9ASNP94, data view SNP94(1), can anyone help me design this.
    My planning area is a copy of 9ASNP02.
    Thanks in advance.
    Mono

    hi Harish:
    I have create a planning area which is identical to 9ASNP02 for my pl.book except the unit of measure (EA for ST), and when I try as you said I get a message stating that <b>The planning area of planning books 9ASNP94 and Z_mono (my pl.book) is not identical</b>.
    Any other way?
    Thank you
    Mono

  • APO SNP Planning Book Show Product View alternative UoM

    Hi,
    I have a base UoM of BTL and an alternative UoM of CAS.
    I can change/save in my users settings the in transactions /SAPAPO/RRP3 (Product View) and /SAPAPO/SDP94 (Planning Book) to show the alternative UoM CAS as default.
    The problem I have is when I enter the Planning Book, load a product, right click on the product (in Selected Objects), select Show Product View and then look at the stock tab, this always shows as the base UoM BTL.  Can this be saved to show the alternative UoM CAS?

    Hi Linda,
    Try changing you user settings for a product in RRP3 Screen.
    Page Menu --> Settings -->General Tab -->General Panel -->enter AUOM value (CAS in your case).
    Note - The conversion only takes place for the products, for which the alternative unit of measure entered is also entered as the alternative unit of measure in the product master, or for the products, for which the base unit of measure has the same dimension as the alternative unit of measure.
    Caution: Test it , how its affecting for other products which doesnt have CAS as AUOM.
    All products which have BUOM as BTL will be changed to CAS when AUOM is maintained for them in product master.
    Thanks
    Vinoth

  • Purchase requisition date in SNP planning book and product view not in sync

    Hello Experts,
    We have an issue with display of purchase requisition date in SNP planning book.
    We are manually entering the PR's for a perticular week from Monday - Sunday(01.09.2014- 07.09.2014), when the last PR is entered on 07.09.2014, it does not appear on the same day in planning book(cell becomes empty) and moves to 06.09.2014, thus quantity on 06.09.2014 is the summation of the quantities present on 06th and 07th.
    The PR dates are appearing correct when we click on display details in planning book and they are correct in product view, MD04 as well.
    Additionally, this is the same date on which daylight saving time comes  into effect.
    Kindly advise if anyone has faced similar situation earlier.
    Many thanks,
    Aditi

    Hi Aditi,
    Check the time zone that you have in your location in ECC and APO.
    Also note it is recommended that you maintain the same system time zone in APO and in ECC. (check tcode STZAC in both systems).
    Different time zones should generate this kind of inconsistencies.
    Kind Regards,
    Mariano

  • The "Details All" view in the SNP planning book is not sorted

    The "Details All" view in the SNP planning book should be sorted by Product Description in ascending order. 
    When all products in the selection ID are loaded into the SNP planning book, and then "Details All" is selected from the Header area, the product description list is not sorted in ascending order.
    However when I load small number of products the issue does not occur they get sorted correctly by product description.
    Is this hapenning due to standard functionality/Standard macro in Planning book?
    Please let me know if anybody has faced this kind of issue earlier.
    Edited by: Rohit Arun Bhosale on Jul 5, 2010 1:05 PM

    Hi Rohit,
    If you are using Detail All drill down then you wonu2019t get any option for sort as it will load all codes from the selection  in the planning book and sorting will be based on product IDs.
    but if you drill down from header on detail all -filter, even if you sort the display list there using ascending/descending button for Description, the list that you will get in the planning book after load will be based on the Product IDs agian.
    I hope this is controlled from the selection we do in planning book where we select Location/Product, but if your planning is better driven by the description then you can remove the Product ID selection from header setting and have only description in drill down.
    Regards,
    Digambar

  • User is unable to view the selection window in the planning book

    Hi Friends,
    I am able to view the selection window in the planning book.
    User is unable to view the selection window in the planning book.
    Is it authorization issue or any settings issue?
    Please explain me in detail.
    With regards,
    Balu

    HI Balu
    Can you check if ''Selection profile" is checked in the ''view selection" option in the top left of the planning book for the user?
    you can choose the hide/show the Selection profile tab, planning book/data view and macros tab using that function.
    Check if this helps.
    Rgds, Sandeep

  • Data available in RRP3 view but not coming in SNP planning book

    Hi All,
    I am facing an issue in SNP book. I can see forecasts in RRP3 view. But when I load the same data in SNP planning book, the forecasts are not coming there (forecast KF)
    I ran LC Cons check, PA cons check, OM17, but still the same result.
    Any pointer would be highly valuable.
    Regards,
    Manotosh Bhattacharya

    Hi
    If you look at the standard Forecast KF 9ADFCST in your planning area, it is usually assigned the Category Group of DF1. This category group only contains the category FA for forecast. If you create Forecast in /SAPAPO/RRP3, this will create Additional Forecast or category group FC. Therefore any forecast generated this way will not appear against the standard planning book KF.
    So you have two choices, if your forecast is only FC category then use the KF 9AAFCST Forecast (Addittional) in your data view or create a new Category Group with both FA and FC assigned to it and then assign this Categotry Group to 9ADFCST in your planning area.
    Regards
    Ian

Maybe you are looking for