Planning calender for BTO
Hi,
While using Planning calender, it works for TAN related orders,.i.e Delivery dates are determined correctly in PR/PO.
But when we use TAB related orders planning calender does not work, delivery dates are not determined correctly.
Is there any config/ master data change so as to include BTO also?
Regards,
Vengat
HI
You can check History of PIR through MD62 itself.Select particular row, Goto Menu, Select Item History(Shift +F6).
Or
You may pls execute transaction MD73.
Plz select option "3 :History Planned ind reqmnts " in the display options and execute the report.
Regards
Anupam Sharma
Similar Messages
-
Planning calender: Delivery 2 times per per week
Hello,
we got an arrangement with one of our vendors. When we order on Monday, Tuesday they will deliver on Friday the same week. Wenn we order on Wednesday, Thursday and Friday the will deliver on the next Tuesday.
I tried to solve this by using a planning calender for Tuesday and Friday. The calender works fine. But please see the following table and the problem. You can see that i can not reach the expected delivery days exactly.
Order Monday Tuesday Wednesday Thursday Friday
expected delivery day Friday Friday Tuesday Tuesday Tuesday
Delivery with 1 day delivery time Friday Friday Tuesday Tuesday next Friday
Delivery with 0 days delivery time Friday Friday Friday Tuesday Tuesday
Anybody an idea to reach the expected delivery days?
One solution could be to change automatically via batch the planned delivery time, two times a week.
Thanks for your response.
Johannes SchulteHello Antony,
i do not now how this should solve my problem. Can you please add more information?
I add some periods from my planning calender. There are two types of periods:
1: start at Tuesday and end at Thursday
2: start at friday and end at Monday
09.02.2010 11.02.2010 12 2010 0
12.02.2010 15.02.2010 13 2010 0
16.02.2010 18.02.2010 14 2010 0
19.02.2010 22.02.2010 15 2010 0
23.02.2010 25.02.2010 16 2010 0
26.02.2010 01.03.2010 17 2010 0
02.03.2010 04.03.2010 18 2010 0
05.03.2010 08.03.2010 19 2010 0
09.03.2010 11.03.2010 20 2010 0
12.03.2010 15.03.2010 21 2010 0
16.03.2010 18.03.2010 22 2010 0
19.03.2010 22.03.2010 23 2010 0
Regards
Johannes -
The delivery date for the PR needs to consider planning Calender Periods
Hi Friends,
Please help me in solving in my scenario given below:
The Planning calender periods are from Monday through Thursday(No Friday and weekends). When there is a Purchase Requisition (PR) planned date on Monday and the GR processing time is one day. The delivery date should be on the before Thursday (Becasue there is no period on Friday).
But, the delivery date is being created with the before Friday, which shouldn't happen.(Requirement is that Delivery date shouldn't consider that friday, hence, the delivery date needs to be on Thursday).
NOTE: The lot size settings are Lot sizing Procedure : P(Period lot sizing procedure), Lot-size indicator: K (Period lot size as in Planning Calender), Scheduling : 1 (Period Start = Delivery date).
Thanks for helping me in advance,
Surendra ChakkaHi Santosh,
Thanks for your Questions. Below are the explainations:
1. Can you expalin how your system is behaving at the moment?
A. Presently the GR Processing time is 1 day for a material in Plant. So, if the user wants to produce on Wednesday (Planned date in PR, provided by the MRP run), then the delivery should be on Tuesday (Because GR processing time is 1 day). In the same way, he dont wants the delivery to be on Friday. I mean, if he wants to produce on Monday, he wants the delivery to be on Thursday.
Only Friday, he don't wants to make the Delivery.(The delivery date should not show Friday in PR's).
2. Pls explain your original MRP view and planning calendor setting...
A. For solving of the above issue, we changed the Lot size to copy of "PK" - Period lot size acc to planniong calendar. Then we maintained the Planning calendar, in which the periods are for every Monday, tuesday, wednesday and thursday. Expecting, the delivery should be excluded for friday, the friday in the planning calendar is not given as a period.
The scheduling paramter in the Lotsize is tried with both the options (period start = Deliery date and period end = Delivery date).
Later removed "PD" in MRP type and tried with "R1" Time phase req. But, the precondition for this is to maintain "Forecast req". This is also done. But, then, the system for this material is not responding to the MRP run. It is asking to run the forecast model. We ar not using SOP.
3. The results thst you get with current setting?
A. For the planned date in PR of Monday, the delivery date in PR is on the day before monday. i.e., Friday (Saturday and sundays are holidays).
4. Expected results...?
A. For the planned date in PR of Monday, the delivery date in PR should be Thursday (the day before monday production).
Hope, i am clear in my explaination. Please revert back, if you need any more information.
Thanks and Regards
Surendra Chakka -
Hi Gurus,
Can someone pls tell me table for Planning Calender.
RegardsHI
Check Table T439G PPplanning periods: header table.
Regards
Anupam Sharma -
Planning Values for past calender month
Dear all
My planned values for past month will be moved out of Planning version.Where can i view my planned values for the Product group and materials for the past months/year.
S AnilHI
You can check History of PIR through MD62 itself.Select particular row, Goto Menu, Select Item History(Shift +F6).
Or
You may pls execute transaction MD73.
Plz select option "3 :History Planned ind reqmnts " in the display options and execute the report.
Regards
Anupam Sharma -
Issue in assigning new Planning Calendar for MRP.
Hello Experts
I have trouble in setting up new Planning calendar for S&OP and MRP process. Let me explain in details
Requirement is, currently I am using standard country specific Factory calendar format (monthly period) per plant. But new requirement has came up and Company wants to change beginning and end of period (monthly) -- as shown below
Current Calendar
1 July to 31 July = period 1 - 2014
1 Aug to 31 Aug = Period 2 - 2014
and so on..
New requirement is ( Last week of Friday is end of Period)
Sat 28 June to Fri 25 July = Period 1 - 2014
Sat 26 July to Fri 29 Aug = Period 2 - 2014
Sat 30 Aug to Fri 3 Oct = Period 3 - 2014
and so on..
(basic concept is to keep
4wk, 5wk, 5wk for Quarter 1
4wk, 4wk, 5wk for Quarter 2. and so on.. )
I have setup new planning calendar in MD25..
ie. min period, start of period not a working day, Calculation rule & Period etc...
then assigned new planning calendar in MM02 - MRP2 and also in MRP1 used Lot size PK... etc..
But when i Put demand in MC88.. which gives us std month format and transfer to DM, then Ran MRP but some how MRP is not creating correct Qty in planned demand as per new calender..
i.e.. 1 July to 31 July = period 1 - 2014 if total demand Qty for Material XYZ is : 50
I am expecting planned demand result in MRP as... Sat 28 June to Fri 25 July = Period 1 - 2014 - should be 50 in total.. but It's not..
Any reason? Or I am missing some settings?
Thank you in advance..
PC...Thanks KK/Umesh
Business wants planning calendar in this format. And Fiscal Year Variant has also been set according to new calendar.
KK, Regarding MC88 there is no option to incorporate planning calendar into S&OP process. And Organisation's S&OP process is set from day one (Planning by ProdGrp/Material) so MD61 would not be a good option to use.
Umesh, regarding "start of period not a working day", I have selected "do not displace". And 27/09 and 27/12 dates are set holiday. The major issue here is: Not every 4th Sat of month is Period start day, MRP is picking new planning calendar (defined in above table) from the system But some how when transferring forecast data from planning table to demand management (MC88), system don't recognize new planning calendar and it distributes demand over weekly bucket per regular month Calendar instead of new planning calendar..
Some how I need to incorporate new planning calendar into S&OP setup somewhere, Any thoughts?
Thanks.
PC -
Hi
What is the function of Planning Calender in Lot Sizing procedure in SNP.Hi
You can define the planning calendar to define the periodicity of lot size.
For example in our case we want to SNP to create requirement only in alternate month based on lot size.
So we create planning calendar which consist only alternate month and attach to lot size.
Now when we execute the SNP planning, it will create supply element only in alternate month.
I hope this will give insight of it. Please let us know , if it helps you.
Thanks
Amol -
Use of Planning Calender in MRP Area
Hi ,
Can any body tell me the possible way to use Planning Calender in MRP Area for Vendor direct Orders
Thanks & Regards,
NirmalyaHi
i have tried above link ..........But still not able to get the desired results.
Need your help on this.
Thanks,
Nirmalya -
Linking of planning calender to vendor master record
Hi All,
Could you please let me know how I can determine a particular date of a week as the delivery date (Monday to Friday) by the vendor and plant combination.
That means
A purchase order created on 30 September for material X plant YYYY and vendor V1 has a receipt date of Friday 10 October.
As the fixed receipt date is Thursday, the actual delivery should occur on Thursday 16 October.
This receipt date based on fixed weekday must be the one computed by MRP calculation and appears on MD04 stock requirement list as actual receipt date.
(I have got how to make it for the plant, that is by giving the Planning cycle in the MRP2 view and for that we have to select time phased planning that is R1 in MRP type field in the MRP1 view.) I have also seen in the vendor master alternative data for a particular plant I can give the Delivery cycle and planning cycle but they don't determine according to vendor plant combination when I do MRP run in MD03 and see the PR s created.
Please let me if you need further explanation
Brownie points are waiting for helpful answers!!!!!!!!!Hi Kishore,
Thanks for the suggestion, but I have one question in my mind. If we have to determine the delivery date according to a particular vendor then we are maintaining the planning calender and delivery calender in the vendor sub range,and we are also maintaing the vendor in the source list for that plant and material and making the vendor as MRP relevant, then
Is there any need to give planning cycle in the MM record,as now we are not utilizing the material master record planning calender, instead of that we are using vendor subrange planning cycle and delivery cycle.( I tried to run MD03,after removing the planning calender in the MM record and I got the error "Error determining planning periods for calender")
More over what is the difference between the planning cycle field and delivery cycle field in the VM record?
Please let me know as this is a requirement from the client which we need to map ?
I am using MRP type PD and lot sizing as PK(period lot size for planning calender)
Regards,
Sushanta -
Hi gurus,
I want to understand the use of Planning Calender. I want to know what will happen if i use the Counter as 2 and give the day as Monday. Please give me an example so that i can understand the use of Planning Calender. And also on the Procurement Proposals getting created based on Planning calender.
Regards
brijeshHi,.
Planning calendar (MARC-MRPPP) in combination with lot size PK works in MRP calculation date, but not in ATP.
Example: today is 1/15/09 (Thur), my calendar is configured to have deliveries on Tues, Planned delivery time is 6, GR time is 1. MRP will calculate the following date:
1/15 + 6 = 1/21 (Wed). It would then increase the date to the next Tues (1/27)
1/27 + 1 = 1/28 - this is the result for the requisition date.
If I enter a sales order (ATP check to use RLT) and there is not available inventory, I get confirmed date 1/22! The system takes today 1/15 + 6 + 1 = 1/22. But this is 6 days before MRP can confirm it!
Menu path: Production -> MRP -> Master Data -> Planning Calendar (MD25)
You will then need to use this planning calendar (the one you created) in the material master when planning your raw materials (MRP2 View in 4.6C - Field name : Planning Calendar).
1. When you maintain the planning calendar you will need to enter a valid from date and valid to date.
2. Your periods will also need to be set up and they will be weekly, for example:
From Date : 11/23/2009 To Date : 11/29/2009 (11/23 is a Monday, this is your from date).
Do this for as may weeks as you wish (say weekly for 2 years).
3. When you have set up the planning calendar, you will then need to make some changes to the weekly lot size configuration
(WB), or you may need to create a new lot size key if you do not want to change 'WB'. Essentially, you will need to use the
following in the lot size configuration (OMI4) :
No. of Periods : 1
LotSizeProced.: P
LotSize ind : K
Scheduling : 1 -
Hello all
I want to receipt a material every tuesday,so i use MD25 to setup a planning calender,also use lot-size PK and select the calender
i just setup.
But when i use md03 and md04 to display the result of MRP run,it cannot follow my planning.
Why?can anyboby gave me some advice?
Thanks a lotHi Vikas,
You are creating planning calendar which works only to create MRP lot size during MRP. It is nothing to do with factory calendar.
If you want to have diffrent calendar for production then create the second one from SCAL for 5 days and assign this to work centers in capacity tabs. Then this calendar will be taken for capacity planning only..not during the MRP. MRP will take the 6 days celandar during planning which is asigned to plant by MM.
If any clarifications then revert.
BR,
TAJUDDIN -
Sybase - dba planning calender backup scheduling hangs....basis 740
Dear All,
We are using ERP6 EHP7 on sybase and we are facing an issue for scheduling a daily backup.
When I am trying to schedule a backup via "schedule an action" from dba_cockpit its getting hanged. And it has taken now more than 1 hr.
Even I have implemented the dba_cockpit correction note for 740...but nothing works.. 001882376
is there any one who can help me on this..??
Regards,
Letz..Hi Deepak,
Thanks 4 the quick reply when i am clicking on DBA Planning Calender and after selecting the job when i clicked on Action Details it is showing only this as per screen below
Is there any further option apart from this...
Please Excuse me for the silly question as i am new in SAP Basis...
Thanks & Regards,
Prasad Deshpande -
SOP flexible planning calender
Hi Experts,
Plz light on the issue, we are going with SOP flexible planning -
client want planning result for only 6 days/week but we maintained calendar for work center for 7 days,
How assign 6 days calendar for only for SOP planning purpose,
Thanks in advance
Mohan MDear,
You can define the Factory Calender for Info structure in Tcode: MC7F asign 6 days work calender here.
Regards,
R.Brahmankar -
Hi Gurus,
I have a requirement in Planning calender.
My clients wants to change the Planning Calender Validity Period From 2011 to 2050.
When I try to change (T Code MD26 ) the period from 2011 to 2050 it is allowing me to do it but when I try to save or click on check calender it is giving error message " Data is incomplete".
In general setting Tab I have maintained the Minimum Period as 999
I have checked the setting in SCAL .
Help will be rewarded
Regards
DhananjayHi
Planning calender does not look for SCAL .
you might not have completed the settings in MD26.
Go to Help file & try to correct the settings.
Regards
YMREDDY -
Planning Calender Assignment to Plant
hello experts
wee have maintained 7 planning calender to plant 0020, the same client wants to maintain to the plant 0010,
pleazse let me know the procedure and implications and impact of this assinment .
please suggest me earliest.7 planning calenders maintained earlier, its not by me, now, customer is asking me to maintain same 7 calenders to plant 0010,
screen shot attached for ref, dta from table T439g
0020 ES1 1 - 999 04.01.2006 29.12.2020 19.10.2006
0020 ES2 1 - 999 02.01.2006 30.12.2020 19.10.2006
0020 ES3 1 - 999 28.03.2007 23.12.2020 26.03.2007
0020 ES4 1 - 999 04.01.2010 20.08.2020 10.09.2010
0020 ES5 6 V 999 18.09.2006 30.12.2020 19.10.2006
0020 QP1 1 + 900 04.01.2010 17.05.2020 03.11.2010
0020 QP2 1 + 900 04.01.2010 21.05.2020 03.11.2010
Maybe you are looking for
-
Is it possible to use Time Machine with an external hard drive for two separate computers?
I'm looking to purchase an external hard drive to use as with time machine as a backup for two separate computers. I'm not sure if I should buy 2 EHDs and dedicate one to each computer, or if Time Machine has the capacity to back up both computers s
-
Problem using iframe in portal
Hi, I've used iframe in oracle portal. In a jsp, i gave the link as <iframe src ="<%=actionURL%>" width="50%"></iframe> There the actionURL will take the action to another jsp.Its like a jsp having another jsp. But there I need to fetch some values f
-
Forum doesn't display correctly at 800x600
I have my browser window at 800x600 because I like to do other stuff while I have it open. However, the Arch forum is too wide for this and doesn't scale down like other phpbb forums. I suspect this is either because of the Google ads or the AUR/Bu
-
Best way to create mutiple hyperlink on the same field
Hi all, A customer wants to create a P&L report in WebI. Assume that the report just contain a table with lots of entry : Sales, Cost ... If the user clicks Sales row, it will jump to report A for more details. If the user clicks Cost row, it wil
-
HT201209 how do i obtain a refund on an electronic itunes card sent via email?
Hello, I sent someone an electronic iTunes gift card via email back in December 2012. It was never redeemed. How can I obtain a refund or have the funds on the card transferred to my iTunes account? Antionette Hill