Planning changes to Authorizations for migration to V7

Hello Experts,
I researched the new authorization concept but I have 2 basic questions:
1) Do Bex reports need to have authorization variables defined on Authorization Relevant Infoobjects to force a selection within the set of authorized rows. From the PPTs I downloaded from SDN, it seems that this is no longer necessary and that the security engine will prevent the display of non authorized rows?
2) We intend to ugrade to v7 but continue to deploy V3.5 Infocubes under V7. Assuming we do not change the default and work with the new authorization concept, will the old, non upgraded  infocubes be subject to the old concept authorization objects or will the new authorization concept apply to these cubes?

David,
   The answer to your first question is : If you need to restrict the value for the relevant Infoobject then you need to create a Authorization variable in the BEX Queries . If you have defined your Info object as Authorization relevant and if that object is a part of the query ( Not used to restirct by any values), then in your analysis authorization object you have to have that Infoobject with "*" otherwise it will give authorization error. 
When you upgrade to 3.5 to BI 7 and still used the old transfer rules, update rules and old authorization functionality will still work. But it is recommended that you migrate it BI 7.
Hope it helps,
Cheers,
Balaji

Similar Messages

  • Unlimited plan changed without authorization

    >> Subject edited for brevity and duplicate post removed to comply with the Verizon Wireless Terms of Service   See My Unlimited Plan changed without my authorization! <<
    Message was edited by: Verizon Moderator

    Did you first activate the new phone on her line or your line?? You would have to activate the phone on her line first and then make the switch otherwise yes, you will lose your unlimited data.

  • Changing itunes authorizations for iphone

    My daughter has iTunes on her PC. I also have it on my Mac. For years now, she's been accumulating songs but they were bought on my account and her iTunes uses one of my account's computer authorizations. But now that she's no longer a child, she's getting an iPhone. I assume she's going to need her own account to be able to sync the phone. But how will she be able to set it up to use her itunes if her itunes library of songs shares my account? I already have my own iphone that syncs to my Mac. So giving her the account isn't an option. Is there any way to convert her songs purchased before the higher rate unprotected versions were available so they will continue to play for her?
    Thanks

    Sorry, I think my question may be better suited for the iphone forum.

  • Report for all changes in Authorizations

    Hello,
    I need to create a report that will show me all the changes in authorization for each user.
    For example:
    Letu2019s assume the following:
    01-01 the authorizations for BP were Full authorization
    01-02 the authorizations for BP were changed to No authorization
    01-03 the authorizations for BP were changed to Read only
    On the history log I can show the differences by choosing two lines and clicking on Show difference. But I need a report that will show me ALL the changes in authorizations on various dates range.
    Thanks
    Revital

    On the history log I can show the differences by choosing two lines and clicking on Show difference,
    Export  to Excel to get a report of changes in authorization,Since authorization is hard coded in table,U can't view it as a report.

  • How do you change ID authorization if wrong ID was installed?

    Got a new tablet with all my programs pre-installed.  Adobe ID used for setup is not my ID so now I cannot access my books.  How can I change the authorization ID so that I can access my books?

    CTL-shift-D does nothing.
    In ADE under Help it says “Authorize Computer CtrlShiftU”, however this line item is in light grey, indicating that you cannot click on this line and the command CtrlShiftU does not work either.  The next line under Help is” Authorization Information CtrlShiftI” which shows me the ID authorization that is set up for ADE, but this ID is not my correct ID.  It was set up by the “seller” of the tablet as a working dummy account ([email protected]) for them to set up all the programs I wanted on the tablet.  So now I am locked out from changing the authorization for this computer – it keeps telling me this computer is already authorized to that incorrect ID.
    How the heck can I get rid of it!!  I’m desparate for help.  I’m losing approx. 1000+ books because of this!!
    Please, Please help me.
    Denise Crncich
    [email protected]

  • Plant level authorization for Notification Change

    Hi All
    We have 7 plants and person belong to one plant is able to open and change the notification of other plants.
    In the role we have given restriction for the plant for the Tcode IW 22 and for the object SWERK .In the Notification only Workcenter and Plant fields are mandatory.
    How can we restrict for a user belong to a particular plant can only change his plant notifications using IW22 only ---not IW28
    Thanks in advance
    gangs

    Dear gangs,
    Check in all the roles of that user in orgnozation levels maintenance plant and planning plant.
    It may happen in one role you have ristricted for that user, but in other roles it may be having the t.code authorization for IW22 and with other plant also.
    Check that also.
    Regards,
    Praveen.

  • Authorizations for planning

    Hi,
    We are facing the following issue concerning authorizations for integrated planning.
    An employee 'X' should be authorized to change its own planning and display the planning of other employees. Furthermore the employee should see WBS elements 1 & 2 while planning and all WBS elements while displaying.
    I created two authorizations:
    1) EMPLOYEE = 'X', ACTIVITY = '02', WBS = 1, 2
    2) EMPLOYEE = '', ACTIVITY = '03', WBS = ''
    and an authorization variable, which is in the characteristic restrictions of the query.
    By doing this, while running the query the employee always gets to see ALL the WBS elements (for all employee numbers). While changing his own planning, he gets the message 'insufficient authorizations'.
    How can this issue be solved in analysis authorizations?
    Thanks in advance.
    Dave

    Hi,
    Check this:----
    HR Authorization: In a nutshell...
    Regards,
    Suman

  • System Status Authorizations for Marketing Plans and Campaigns

    Hi Experts,
    We are using the Standard System Statuses on the Marketing Planner like the Created , Released, Approved, Finished, Locked and Rejected. My requirement is to limit the access to the Users for these Statuses. For Example :
    User 1 will have access to Created.
    User 2 will have access to Aproved.
    User 3 will have access to Aproved,Released, Create
    How do I set the Authorizations for the System status based on the User? I tried creating Authorization Keys under Status Profiles, but I am not clear on where to assign them.
    Please guide me.
    Thanks in Advance.

    Hi ,
    Thanks for your input. I am planning to go with your second option to go with assigning the Authorization objects at the Marketing Plan and also at the Campaign level . My only concern here is will we be able to assign status specific authorizations here ?
    The Authorization objects given are for change, create etc. There are no status specific authorization  objects mentioned.   My requirement is the person who creates the MP should have access to release it and only the approver should be able to see the approved status and change the status o approved.
    Do you suggest using Authorization keys and assigning them ?If so where do we define the restictions on the Authorization keys like
    Authorization Group 1 has authorization to Create , modify  a MP and can only   View / Change the  statuses to Create and Release.
    Authorization Group 2 has access to Modify and has access to change the  statuses to Aproved.
    Is there any way this can be achieved ? Please let me know if I am going in the right direction.
    Regards,
    Pooja

  • Problem with Authorization for Planning folder

    Hi an having a problem with providing authorization for a planning folder
    i am getting the following error when i test it with test user
    Error while calling up RFC
    Message no. UPC202
    Diagnosis
    You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
    "You do not have authorization for InfoCube ZT_MR_T "
    Procedure
    Inform the system administrator.
    we are not pulling the data from any other server, all the data is on the sif any one has faced the same issue let me know.
    Regards,
    Abraham

    Calling Thru Trans code: BPS0 in ECC 6
    getting this error:
    Error while calling up RFC
    Message No. UPC202
    Diagnosis
    You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
    "An error occurred during the receipt of a complex parameter."
    after i check in bw trans code:st22
    Following this error message:
    Category                   Internal Kernel Error
    Runtime Errors         PARAMETER_CONVERSION_ERROR
    Application Component  BC-MID-RFC
    Short text
        An error occurred during the receipt of a complex parameter.
    What happened?
        During a remote function call, an error occurred while converting
        a complex parameter.
    What can you do?
        Note which actions and input led to the error.
        For further help in handling the problem, contact your SAP administrator
        You can use the ABAP dump analysis transaction ST22 to view and manage
        termination messages, in particular for long term reference.
    Error analysis
        An error occurred during the conversion of a complex parameter.

  • Problem with Authorization for BW BPS planning Folder

    Hi an having a problem with providing authorization for a planning folder
    i am getting the following error when i test it with test user
    Error while calling up RFC
    Message no. UPC202
    Diagnosis
    You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
    "You do not have authorization for InfoCube ZT_MR_T "
    Procedure
    Inform the system administrator.
    if any one has faced the same issue let me know.
    Regards,
    Abraham

    HI ,
    I Checked it out we dont have that cube in our system.
    Regards,
    Abraham

  • Separate TCode for Mass Change of documents (For authorization purpose)

    Hi
    We have internal audit function where internal audit chief will remove the payment block of multiple vendor invoices through FBL1N --> Environment --> Mass Change.
    Now problem is that authorization for FBL1N is given to 6 more employees (related to AP Accounting). Hence all these employees can do the mass change. I want to restrict this mass change authorization only to one person i.e. internal audit chief.
    Please tell me how to bring this restriction.

    Hi:
          You should contact your basis guy to do so...In tab authorization first you will have to find this object he system will display it , there you can assign 03 in place of *. 
    Personally i will recommend you should go for creating transaction variant using SHD0 which is an easy way to do so. Please check it will solve your issue. I just did both in test sever both of them are working perfect for me. Mass button is disabled when you set 03 for F_BKPF_KOA. SHD0 meets the subject topic of your post.
    Regards

  • HT1349 how can I change an email for authorization, the email address we used years back, is no longer a valid email address

    how can I change an email for authorization, the email address we used years back, is no longer a valid email address

    SfromW wrote: ... how can I change an email for authorization, the email address we used years back, is no longer a valid email address
    How to change account here: http://support.apple.com/kb/PH1641
    If you need more help, start here: http://www.apple.com/support/itunes/
    SfromW wrote: ... we can't remember the password from the old email address (for authorization)...
    Help Retrieving and changing passwords here: http://support.apple.com/kb/HT1911
    If you need more help, from iTunes for Windows, click  iTunes > iTunes Store > Support
    SfromW wrote: ... apple should make it easier to transfer authorization authority....I would think anyways.
    You might want to rethink your thoughts about making transferring authority easier.  Making it too easy would certainly degrade your account's security.  If you still believe it should be easier, you can send feedback directly to Apple via http://www.apple.com/feedback/itunesapp.html
    You will not get a response, but you can be certain that the responsible Apple people will see your input for consideration in FaceTime product development.
    As a new user, please understand that you are NOT directly addressing Apple here.  For more info about Apple discussions, start here: http://discussions.apple.com/static/apple/tutorial/etiquette.html 
    Message was edited by: EZ Jim
    Mac OSX 10.7.4

  • No authorization for object ALVL in integrated planning

    while transfering aggregation level in IP,raises the following error,
    'No authorization for object ALVL <name of the aggregation level'.
    i see a OSS Notes for the same - Note 913852 - IP: Content-transferring aggregation levels release on 10/01/2006.while importing notes 913852 go the following error:
    Error Message - Bad ObjectID
    What happened?
    Invalid Format of ID
    What can you do?
    ObjectIDs must be at least 24-digits and numeric
    Error code: WEBSMP207-20061006191004-0009
    Error details: 21A1D7E-702/1A00C/3162-71D8CFB9-3CB9265-29AB5B
    Service Name: SAPIDB
    Service Server: PWDF1724
    Process-ID: 1640
    Thread-ID: 1428
    1) Is there any otherway to handle this error giving more authorization of JCO user or delevoper user?
    2) I see no delevered aggregation level or planning functions in 2004s sp09.is there any way we can import delevered content?
    3) is there any best practices for implementing Manufacturing Cost Planning ( MCP) using BI-IP?
    Thanks .

    Hi,
    I am having the same problem, did you come to a conclusion?
    Rds, Thomas

  • Badi or Enhancement for Purchase order invoice plan change for ME22N

    Hi ,
      I have a req to have a custom tab at the header level with the push button in ME22N , By clicking the push button i need to update the invoice plan detail to all item level by using the 1st line item invoice paln entered while creating PO . I have done with adding the custom tab using MM06E005 enhancement. The problem i am facing is need to change the PO invoice plan detail for all line item. Please let me know the BADI or Enhancement to change the PO detail in the Tcode ME22N . Any Badi before save or after save with invoice plan details.
    <offer removed by moderator>. Many thanks for you help!
    Regards,
      Vinoth.v
    Edited by: Thomas Zloch on Oct 14, 2011 11:59 AM

    Hi Eduardo
    ME_PROCESS_PO_CUST is don'tt have the Invoice plan and ME_GUI_PO_CUST is for screen but i need the badi to get the invoice plan details and change the remaining item with the invoice plan .
    Regards

  • How do I change the authorization e-mail for a device?

    We're trying to download library books to my wife's new Color Nook.  We've downloaded the books to our computer via Adobe Digital Editions (ADE).  But, whenever we connect the Nook to our computer with a USB cable, ADE shows a prompt asking us to authorize the device using an old e-mail address, not the one my wife is using for her Nook.  Also, when I try to use the Library > Authorize Computer command, ADE says that we've authorized a device using the old e-mail address, not the one my wife is using.  How can I change the authorization e-mail address so that it recognizes her device???

    1.  I'm sure you must have tried signing in to Adobe and changing email address in your profile.  Don't know if they retrofit.
    2.   I can't account for what just happened.  Last night I took screen shots of all the various manifestations of my problem, including messages that the book both could and could NOT be copied.  For the umpteenth time I reopened the original booksale into ADE and tried to drag to Nook--got the usual red X's.   This morning the icon miraculously allowed itself to be dragged into the nook. Green all the way--nothing had been changed.  Elves in the night?  Then I opened Nook--no book! But there it was in Documents.  No, it wasn't there all this time.  I knew to look there because of other threads.  I also remember someone else had a problem that sorted itself out after leaving the Nook attached to computer for a long time. 
    So thanks for all the suggestions.  What I take away from all this is that the Nook works well with B&N but using ADE for EPUB books is clumsy and tedious. Or possibly it is just slow.   If I had wanted only books in English I could have gotten the Kindle, but with Nook I expected to gain access to Dutch books.  It had worked before, but this time, perhaps with this seller, I spent hours spread over 3 days to sort it out and I still don't know how to avoid this the next time. 

Maybe you are looking for