Planning "Configure Product Option" using configuration utility

Hi All,
I have installed HSS on server1 and Planning, Oracle DB in server 2.
Done the HSS configuration and i can able to log into HSS successfully. When i tried to configure my planning,
1. Open the EMP system configurator from planning server
2. Select Hyperion Foundation ( Configure DB, Common database). Here by default "Previousely configure the DB" was secected and configuration was success.
3. Next select planning "Configure Product Option" was not success.
Register with shared service was failed.
getting following error messages.
(Jul 24, 2011, 00:29:22 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Authentication failed:
com.hyperion.interop.lib.OperationFailedException: Unable to Authenticate.Unable to Authenticate.
     at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
     at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:142)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Jul 24, 2011, 00:29:22 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.Exception: Unable to Authenticate.Unable to Authenticate.
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:154)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Jul 24, 2011, 00:32:12 PM), com.hyperion.audit.client.exception.AuditLoggingHandler, ERROR, XML-RPC failed
org.apache.xmlrpc.XmlRpcException: org.apache.xmlrpc.XmlRpcException: null values not supported by XML-RPC
     at org.apache.xmlrpc.XmlRpcClientResponseProcessor.decodeException(XmlRpcClientResponseProcessor.java:104)
     at org.apache.xmlrpc.XmlRpcClientResponseProcessor.decodeResponse(XmlRpcClientResponseProcessor.java:71)
     at org.apache.xmlrpc.XmlRpcClientWorker.execute(XmlRpcClientWorker.java:73)
     at org.apache.xmlrpc.XmlRpcClient.execute(XmlRpcClient.java:194)
     at org.apache.xmlrpc.XmlRpcClient.execute(XmlRpcClient.java:185)
     at org.apache.xmlrpc.XmlRpcClient.execute(XmlRpcClient.java:178)
     at com.hyperion.audit.client.AuditXmlRpcClient.pingServerForStartUp(Unknown Source)
     at com.hyperion.audit.client.runtime.PingForServerStartUp.run(Unknown Source)
Please help me to solve this issue.
Thanks in Advance,
GTS.

Hi
Assuming this is 11.1.2.1 env.For Planning were you able to
Deploy to app server
Configure database

Similar Messages

Transport/Copy Configurable Products alone with Configuration from one Clie

Hi All,
I need to transport/copy Configurable Products alone with Configuration from one Client to another. Any body who can guide me how to do it.
Thanks,

Hi All,
Problem Solved ... Closing the Post...
Thanks and Regards,
The following steps were carried out inorder to solve the problem:
1) Create the Products in target system with the same name as in Host.
2) Create the RFC Connetion "HTTP Connection to ABAP System".
3) Create a Site of Type "External Interface for XML"
4) Assign RFC Destination to the Site Attributes
5) Create Subsciption and publication for "Product Configuration MESG".
6) Assing site and BDOC Type to the Interface Type in IMG
7) Define Request object
8) Start it request by entereing the Request Name, Source Site and Target Site.

Macbook Pro cannot configure AirPort Extreme using AirPort Utility

Hi all,
I can't get my macbook pro's airport utility to connect to my airport extreme, and hard reset doesn't seem to work either. However, the airport extreme still functions properly... just doesn't allow me to reconfigure it.
Steps to reproduce:
1. Open AirPort Utility.
--> my AirPort Extreme router shows up with a green light (it's working).
--> Information displayed includes "AirPort Utility found an AirPort Extreme with 802.11n (Gigabit Ethernet)", with correct-looking gateway and IP information (version 7.2.1)
2. Click "Continue"
--> Screen shows "Reading base station configuration..." with a little spinning icon.
3. Wait 3 minutes.
--> During this wait, the green light stays lit on the router, my wireless connection does not drop, and the icon next to "Reading base station configuration..." continues to spin.
4. Popup dialog appears: "An error occurred while reading the configuration. Please make sure your AirPort base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)". The AirPort extreme is sitting 2 feet from my MacBook Pro, connected only by wireless internet.
At this point, I wonder whether hooking it up with an ethernet cable would work better. So I did the following:
1. Turn off Macbook Pro Airport wireless card.
2. Connect an ethernet cable from the laptop to the 2nd port of the Airport Extreme
3. Wait 60 seconds for DHCP etc.
4. Close the Airport Utility (from the last test)
5. Open the Airport Utility again
6. My Airport Extreme router is again displayed, the same information is present as before.
7. Click Continue
--> "Reading base station configuration..." message with spinning icon appears again.
8. Wait 3 minutes. During this time, as before, the green light on the router stays lit, and nothing much seems to happen. I ran a "ping google.ca" from a terminal window just to verify that my internet stayed connected during this process, and the pings all responded fine.
9. Again, an error popup: "An error occurred while reading the configuration. Please make sure your AirPort base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)"
At this point, I decided it might be a good idea to do a hard reset. I pressed and held down the tiny button on the back of the Airport Extreme for 6 seconds then released... no visible result. Green light still on. Then I tried for 11 seconds. Still no result, green light still on. I restarted the router, waited for the green light to come back on, and tried again with 6 seconds then 11 seconds again. STILL no result.
I can't think of anything else to try. Any suggestions?

The Windows "Airport Setup" version you need for the Airport Extreme N base station is not really available for download - but you can get it if you are up to following this procedure:
1. download "AirPort Base Station Update 2007-002 for Windows" from Apple's web site
2. use a Winzip utility to extract the contents of the file you downloaded (called Airport521update.exe) to another folder.
3. the contents of that folder should include four files - applesoftwareupdate.msi, apsetup.msi, apsetupadmin.exe, and bonjour.msi
4. go to All Programs -> Accessories. Right click on the "Command Prompt", select to "run as administrator", and click continue when Windows asks for your permission to run this command.
5. in the command prompt window, type and execute the command
msiexec /i pathto_folder_of_files_youdownloaded\apsetup.msi /qb ap50isinstalled=1
This method simply forces the installer into thinking Airport 5.0 is already installed, thus letting the installer complete its job of installing a full working copy of the updated version.
This procedure also installs Bonjour for Windows, which will simplify the task of configuring on the PC any printer connected to the Base Station.

Error in configuring NWDI - by using configuration wizard

Hello,
I have installed CE 7.1 and like to install NWDI. It requires me to execute some configuration wizards from administratio tool of the NW CE server. I am following the configuration guide for NWDI and initiated a "Change Management Service (CMS): Create an Application Skeleton". It asks me to provide a CMS URL when I give it http://localhost:50000 or http://cmsmain.localhost:50000 it give me an error that CMS is not running or the URL is not correct like this.
I got to know that CMS is builtin in NWDI and NWDI is builtin in NW CE 7.1. How to check whether CMS is installed. Or any idea to configure the NWDI.
Regards,
Naeem Khan

Hi Alexander,
You may be right. I am installed trial version for the moment. But I have installed ESR as additional comoponent which I have downloaded from Service Market Place. Let's try!!!!!
But the problem is that I have seen there are several components If I go Support Packages and Patches" -->SAP NetWeaver" -->SAP NETWEAVER" SAP EHP1 FOR SAP NW CE 7.1" -->Entry by Component" NW Development Infrastructure
what for components should I require from this site??? and how to deploy them on my server??? Unlike ESR there are SCA files which I am not sure how to deploy them on my server!!! If you know please let me know.
Regards,
Naeem

How to import (create) a sales order of configured product from third party web store

Background:
EBS is used for order, produce, deliver and invoice configured products. Oracle configurator is in internal use.
Screnario:
Start to use third party web store. Configuration information will be loaded into web store.
How to import or insert orders done in web store so that configuration information is equal to orders entered firectly into OM (with configuration)?
Any experiences or examples are welcome.

.There is some documentation on this on Metalink. See:
Importing Configurations [ID 411880.1]

Cannot Export Provisioning info using CSSImportExport Utility

Hi All,
I am actually trying to export the provisioning info from Production Server using CSSImportExport Utility while i am doing this i am getting an error and my export of provisioning info is failing. If i do the same in Development it is working perfectly allright without causing any issues. I am actually trying to see if anyone has faced with this kind of issue before and if yes could you please let me know how can i resolve this issue.
The application name it is showing in the Trace file is our planning application. This error is happening if i am trying to export provisionning info for any application(Essbase or Planning) and also it displays everytime the same error showing the same Planning application.
Please help me out in trying to resolve this issue so that i can have an backup of all provisonning info (hot back up).
Thanks in advance for looking into this issue and helping me out.
Trace...
     2010-07-19 13:17:18,556 Attempting an export operation
     2010-07-19 13:17:21,056 Attempting a CSV export operation
     2010-07-19 13:17:21,072 Export : Exporting provisioning info...
     2010-07-19 13:17:21,072 Export : Attempting to load provisioning info for application "App_name" in project Hyperion System 9 Planning
     2010-07-19 13:17:21,087 Export : Attempting to retreive app id from HSS for "App_name"
     2010-07-19 13:17:23,462 Export : Failed to retreive app id from for the application : "App_name"
     2010-07-19 13:17:23,462 Export : Root cause : /files/Projects/[Production server][App_name][DB_name].Essbase could not be found
     2010-07-19 13:17:23,462 Export : Silently ignoring the last error
Summary :
     Export failed for 1 application(s) using filter {ProjectName = Hyperion System 9 Planning, Application Name= APP_Name}
     The css.xml file used is file:/D:/Hyperion/deployments/WebSphere6/SharedServices9/config/CSS.xml
     The data file used is D:\Hyperion\common\utilities\CSSImportExportUtility\cssimportexport\importexport\Security_export.csv
     The error log file used is D:\Hyperion\common\utilities\CSSImportExportUtility\cssimportexport\importexport\Log\errors.log
     The trace log file used is D:\Hyperion\common\utilities\CSSImportExportUtility\cssimportexport\importexport\Log\trace.log
Edited by: user9360702 on Jul 19, 2010 10:35 AM

Thanks EW for responding. Please see the property file below and i am trying to export the provisioning info only for one planning application and my export of provisiionning is failing. And my importexport file is at the right location which is in exact place like in Dev environment. Please let me know if i am missing anything.
Thanks
importexport.css=file:/D:/Hyperion/deployments/WebSphere6/SharedServices9/config/CSS.xml
importexport.cmshost=BDOWSPHYPWB1
importexport.cmsport=58080
importexport.username=admin
importexport.password={CSS}MRcYv323uzxGr8rFdvQLcA==
importexport.enable.console.traces=true
importexport.trace.events.file=D:/Hyperion/common/utilities/CSSImportExportUtility/cssimportexport/importexport/Log/trace.log
importexport.errors.log.file=D:/Hyperion/common/utilities/CSSImportExportUtility/cssimportexport/importexport/Log/errors.log
importexport.locale=en
# EXPORT OPERATIONS orig
# export.fileformat=csv
# export.file=D:/Hyperion/common/utilities/CSSImportExportUtility/cssimportexport/importexport/Security_export.csv
# export.provisioning.all=true
# export.user.filter=*
# export.group.filter=*
# export.role.filter=*
# export.producttype=*
# export.projectnames=*
# export.applicationnames=*
# EXPORT OPERATIONS
export.fileformat=csv
export.file=D:/Hyperion/common/utilities/CSSImportExportUtility/cssimportexport/importexport/Security_export.csv
export.provisioning.all=false
# export.user.filter=*
# export.group.filter=*
#export.role.filter=*
# export.producttype=*
# export.projectnames=*
# export.applicationnames=*
# export.provisioning.apps=(Hyperion System 9 BI+=Hyperion System 9 BI+:bdowsphypfrs.bdo.com:6800::1)
# export.provisioning.apps=(Analytic Servers:BDOWSDHYPES:1=ASOsamp)
#export.provisioning.apps=(Analytic Servers:BDOWSDHYPES:1=Analytic Servers:BDOWSDHYPES:1)
# export.provisioning.apps=(APS 9.3.1 Servers=APS_9.3.1_BDOWSDHYPWB1_33162)
export.provisioning.apps=(Hyperion System 9 Planning=BDO_DMND)

Missing "Planning" option in configuration utility after installing BPMA

Hello,
I am unable to find "planning" option in configuration utility after installing BPMA.
But the planning applications are working normally.
Has anyone faced this issue before?
Can anyone please tell me how to bring the back in configuration utility?
Thanks
Hemanth

Hello Azmat,
You are right I did the same.
It was a big mess when I did that. I had to reapply patches and re-set DIM settings.
I saw this posting by John in the forms.
Planning Option Not Visible in Configuration Utility
Wondering if this is the solution.But I found this post after re-installing planning in Dev and QA.
I am yet to install EPMA in prod. I want to see if I can install it without disturbing other environments.
Thanks
Hemanth

Planning in APO with configurable products

Dear Gurus
we would like to use APO DP in order to plan the demand of configurable products managing the demand figures only for a combination of the two main products characteristics (model/version) without having in DP all the complexity of the order configuration.
Moreover we would like to allocate this forecast to the plants and make a rough capacity planning. The levelled forecast (MPS) should then be used to explode the dependent demand of the critical components at SKU level.
In order to manage this process I was thinking to introduce u201Cdummy codesu201D that represent the charatteristics combination and u201Cdummy BOMu201D for the explosionu2026. This in order to be albe to use SNP to perform the capacity planning and BOM explosion.
Other scenario could be to make the capacity planning and BOM explosion only in DP (with planning BOM) but Iu2019m not sure of the feasibilityu2026
Could you advise on which could be a possible approach and if you had such similar issue to face? Thanks in advance
Regards
Ayan Bishnu

Hi,
Here you may think of using planning product concept. Inshort you may plan on the basis of one of your critical subassembly
and this subassembly wud be consumed for most of the order demands.
Please check if it is suitable for you and revert
Thanks,
Mangesh A. Kulkarni

HT4262 This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.

In my Airport Utility a read the following message:
This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support." What do I have to do ?? I can use my airport.

I assume that your MacBook Pro is running OS X Mountain Lion ... correct? If so, version 5.6 can run just fine on this version of OS X; it just can't be installed in the traditional way.
Here are the basic steps to install version 5.6 under Mountain Lion using CharlesSoft's Pacifist:
If you haven't already download the AirPort Utility disk image file directly from Apple Support Download
Place the resultant AirPortUtility56.dmg file onto your Mac's Desktop.
Run Pacifist.
Click on the Open Package option. Find the disk image file that you just placed on your desktop, and then, click on Open.
The utility is located as follows: Contents of AirPortUtility56.dmg > Contents of AirPortUtility56.pkg > Contents of AirPortUtility56Lion.pkg > Applications > Utilities > AirPort Utility 5.6.app
Drag AirPort Utility 5.6.app to your Mac's /Applications/Utilities folder.
You can now run the AirPort Utility from the Utilities folder.

TS2220 the following message applies to my airport Utility: This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Suppor

This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
This is the message I have recieved in installing my AirPort Utility... Can anyone help me?

Old AirPort base stations and Time Capsules aren't compatible with AirPort Utility 6.2, so you have to use AirPort Utility 5.6. As you have already updated, you can't install AirPort Utility 5.6 by the normal way.
To install AirPort Utility 5.6 on your MacBook Pro, follow these steps > http://frank.is/mountain-lion-and-the-old-airport-utility/

Promotions at configuration option for a configurable product

Is it possible to apply promotions to a specific configuration options in a Configurable Material?
For example, Material A is a configurable product. It has several configuration options with charges attached at configuration option (i.e. Characteristic value level) through variant conditions. Now if we want to give a promotional discount for a specific configuration option, Is it possible through standard SAP Promotions and Sales Deal functionality?
Base Price of Material A: $1000.00
Confuguration option X : $200.00
Promotion on configuration option X : 10% off of Config Option X charges (i.e. -$20)
Net Price of Material A with Config option X should then be:
$1000 + ($200 - $20) = $1000 + $180 = $1180
If it is possible to handle this kind of promotions in SAP ECC, please suggest the config steps involved to include variant condition type in the Promotions.
Thanks in advance
SCB
Edited by: Sreenivasa Bahudodda on Jan 19, 2009 1:25 AM

Hi,
Have you checked the downloaded knowledge bases in the CRM tables - COMM_CFGKB or COMM_SCEKB?
If you don't find the entries in one of the above tables (particularly in COMM_CFGKB), then you have an issue regarding the download of SCE.
Please let me know you answer, so that I will try to help you to solve the download issue
<b>
Do not forget to reward if it helps,</b>
Regards,
Paul Kondaveeti

If I use airport utility to erase my time capsule will all my settings be lost? Does "import configuration" work well?

If I use airport utility to erase my time capsule will all my settings be lost? Does "import configuration" work well?

Erasing the Time Capsule's internal HDD, via the AirPort Utility, will NOT affect the TC's configuration settings. However, if your intent is to completely remove these settings as well, you will want to perform a "factory default" reset on the TC to do so.
If you first export the configuration, you can always import it back in after the reset to get you back up and running quickly.

Using Configurator to share two iPads with multiple users

I work in an office where several people want to share two iPads. We require individuals to connect to our secure wireless network with their own username and password. Each user also wants to set up the iPad to connect to their own Exchange account. Each person will also use their own Apple iTunes store ID and download their own apps.
If I understand the differences between the two applications, Apple Configurator would be the appropriate tool to manage this and not the iPhone Configuration Utility. If I understand how Configurator works, I set up the iPad to connect to Jane's email and to connect to the Apple Store and our wireless using Jane's credentials. Then I back up that profile using Configurator. Next I configure the same device to connect to Jim's email and to connect to the Apple Store and our wireless using Jim's credentials. Then Jim backs up the device to his profile using Configurator.
Now whenever Jane uses the iPad, she brings it back and plugs it into our Mac to backup her profile changes (her apps, her home wireless network settings, etc.). Jim sits down and "Checks out" the iPad to himself which loads his previously backed up profile. If Jane still has the laptop checked out, Jim can plug in the second iPad and load his profile.
Is this how it works? It seems like Configurator can do this, but not the Configuration Utility (which means you need a Mac running Lion to use Configurator).
Thank you,
Sean

Thanks gyrhead. Those are some of the better articles I've seen on using Configurator. One of our computer lab managers has been playing with it (I work in the IT department for a university). Basically I can see us using it to manage iOS devices we provide for use in the labs or on a short-term checkout basis, but I don't see Configurator as being a solution for the departments we support who want to share iPads between users. Even if a department has a Mac that can run configurator (many do not), I think it will lead to some bigger support and training issues that we do not have the resources to manage.
For now we are going to tell our faculty and staff departments that iPads and other iOS devices are meant to be personal devices and are not meant to be easily shared. Until Apple comes up with an easy way to login to different profiles on the device (I have also seen some third party products in development... like this one: http://nowsci.com/userprofiles/) we are going to recommend that departments purchase an iPad for any staff who needs it. If they really want to share one iPad among multiple users, they can set up a single Apple/iTunes account for the device tied to a purchasing card, and then just use Safari for checking email (instead of configuring everything for individuals). Of course if they really want to it is not a big deal to delete your email/calendar settings and then add them each time you use the device, but if it wasn't my own device I would just use Safari to check my email and calendar over the Web.
Sean

Configurable product - ERP E-commerce 5.0

Hi Gurus,
E-commerce 5.0, ECC 6.0 .......... No TREX........VMC activated
I have the following error once I add the configurable product to the shopping basket and then go to shopping basket.
JCO Exception: COMMAND_EXCEPTION
Function: CFG_API_GET_CONFIG_INFO
Import Parameters:
| PARAMETERS 'INPUT'
CONFIG_ID
G
0
IC6133306
T
|----
|-|
I did the folowing steps
Knowledge bases and runtime versions are created
1) Event Handler is maintained in Table TBE31
2) IPC is maintained as consumer in table CRMCONSUM
3) Table CRMRFCPAR is not maintained as we are on ECC 6.0 (Do I need to maintain this)
4) The JCO user is maintained with the authorization objects S_RFC and S_MI_ADMCO
5) Initialized the DB using report CFG_AP_INITIALISE_DB
6) Request for the Knowledge base and version -- using report CFG_AP_REQUEST_DB
log shows every thing green ... but dont think the Knowledge base is uploaded.
7) ipc/admin/xcm/init.do ...XCM is configured for application type "erp" and the component "jco"
Is there any thing I am missing ... any suggestion why I am getting this error.
Thank you
Ram

Hi Chris,
I have moved to test environment and started working on a clean slate.
I understand what you are trying to tell regarding maintaining the XCM scenario in variant config (SPRO).
I have complete the following steps.
1) Activated VMC
2) IPC is set active in Shop Management.
3) Table TBE31 is maintained for the Event
4) table CRMCONSUM is maintained for IPC
5) Table CRMRFCPAR is maintained with two entries. Though RFC destination is not maintained.
RFC destinations in AP system are not maintained as we are running SAP E-Commerce 5.0 using ECC 6.0 as backend.
6) ran the report CFG_AP_INITIALISE_DB -- every thing is green and can see the knowledge bases in the log.
7) I have maintained the parameter "ipcjcodata" with the JCO component - and maintained the JCO connection user with authorization objects S_MI_ADMCO and S_RFC (with necessary functional groups).
Now If I login to b2b/init.do -- I can see the configuration icon next to the configurable product.
Once I click on the icon -
I can see the reset, accept, cancel options and status and product variant tabs.
But the charecteristics tabs and charecteristics are not being displayed. -- which shows blank.
the jsp's which are showing blank are
1) /ipc/components/characteristicGroup.jsp
2) /ipc/tiles/characteristicGroup.jsp/ipc/tiles/characteristics.jsp
Is there any thing I am missing - Please suggest.
Thank you
Ram

What is the best way to configure AE for use as a wireless bridge?

I am using an AE to provide airtunes to my living room receiver as well as getting internet connection to my living room PC. The way I have it set up is that I am connecting to my existing wireless network (provided by a dlink dir-655) and then plug in the minijack for airtunes and plug in ethernet cable between AE and PC. I don't have a wireless card in the PC so that's why I connect via ethernet cable/AE.
The problem is that the speed with the AE connected PC when it comes to the web, is quite slow. Many times Youtube just freezes and sometimes never catches back up.
I've checked speeds with speedtest.net and my speeds fluctuate an extreme amount.
Is there a way I should configure the AE better to act as a bridge for my ethernet/AE connected PC?
BTW, I'm only about 25 feet from the dlink wireless router so connection quality should be fine. As both devices support N, I think things should work better!
any suggestions?
Thanks

The newer 802.11n version of the AirPort Express offer an option to configure the base station as a wireless Ethernet bridge. Again, Apple calls this ProxySTA. You configure for a ProxySTA by having the base station join an existing wireless network AND by enabling the "Allow Ethernet Clients" option, located on the Wireless tab within the AirPort Utility.
My point is that, as a ProxySTA, the Express will NOT extend the wireless range of your D-Link router. Instead, it WILL allow wired clients to connect to its Ethernet port for network/Internet access.
In the manual setup settings, I see that there is a wireless setting to extend a wireless network and to participate in a WDS network. Would either of these two be better for what I'm trying to accomplish?
In this scenario, no ... as a WDS would not work because very few non-Apple routers are WDS-compatible. Most likely, your D-Link is not as well ... so your current configuration is the only option for what you are trying to do.
It seems that this current configuration should be rock solid, but perhaps I'm not using the proper setup.
The #1 problem with a ProxySTA is that it does not provide the highest level of bandwidth performance. Typically, for the AXn, the best-to-worst performance would be the following configurations: 1) Wired-to-wireless, 2) Wireless-to-wireless (WDS), and 3) Wireless-to-wired (ProxySTA)
As you can see, the first option would be the best, but it would require that you connect the AXn directly to the D-Link by Ethernet ... which, of course, would tie-up its only Ethernet port so that you could not connect the PC to it as you require.

Planning "Configure Product Option" using configuration utility

Similar Messages

Maybe you are looking for