Planning Cycle / planning calender
Hi,
I am trying to maintain a new planning Cycle / planning calender in Article Master : Logistic Store view under replenishment.
Can you tell me how to create a new planning cycle. I want to replenishment to happen twice a week on Monday and wednesday.
Thanks
Hi Barry,
Would help if you could share how you mange to do it with the rest of us.
many thanks
Similar Messages
-
What is the difference between Planning cycle and Delivery cycle?
Hi gurus ,
After created the planning calendar for store , I have the same option value for planning cycle and delivery cycle (planning calendar) in the MRP area data for site specific material master , so what's the difference between these two field ?
Thanks in advance ,
RyanHi,
If you have to deal with more complex situations, you can define a delivery cycle in the material master record in addition to the planning cycle. In so doing, you determine the days on whichthe vendor delivers his goods. The delivery cycle is entered in the material master record as a planning calendar in the Planning calendar field.
You enter a delivery cycle if the delivery date (or the goods receipt date) depends on the day on which you order the goods. For example, you carry out the planning run and place your orders on Mondays and Tuesdays. If you place the order on Monday, the delivery is made on Wednesday, if you wait until Tuesday to place the order, the delivery is not made until Friday
Where as Planning calander is Three character number (numeric or using letters) that specifically identifies a PPS-planning calendar. The difference between Planning calender and delivery cycle is If you have selected the MRP type "MRP" and have set a period lot-sizing procedure according to planning calendar, you enter here which planning calendar is to be used.
If you selected the "time-phased planning" MRP type, the planning calendar that you specify here defines the delivery cycle. This specifies the days on which the vendor delivers the material. You can enter the planning cycle in addition to the delivery cycle -
Single cycle plan with counter in plant maintenance
Dear Experts,
I am creating single cycle plant with performance based with couter reading.
1 I have crated a measuring point with counter in running hrs
2 Created a single cycle plan and given the couter no. there
3 Since i hv given 4000 hrs in plan, as soon as i update the document there should be a notification but it is not happening
Can any one clarify the issue
Thanks&Regards
N.ChandrasekharDear thyagarajan,
1 I hv created meas point with counter with specified equip
2 made document for that of 10 hrs
3 Created a single cycle plan giving reference same equip Cycly given 250 hrs, Entered the counter no there, call horizon 100, schedule 365 days.... while saving given no to save.....while scheduling IP10,
taken the counter ducument which i 1st saved 10 hrs... thn called 1st call and released and saved.
4. here with out entering that 250 hrs in ducument i am getting the notification............?
5. I have to get the notification after entering 250 only..
Why is happening like that
Hope you have under the issue
Regards
N.Chandraasekhar -
How to run the life cycle planning in interactive planning
Hi every body,
Can any one explain me how to run the lifecylce planning in interactive plannings ?
i am getting an error messages when i run the lifecycle planning ..'no records from infocube "
I added 9amatnr keyfigure in my pos recently for life cycle planning purpose ..our histarical data was coming from Infocube BW ...9amantnr keyfigure was not in infocube ..but i added into my pos ...
Please suggest me ..
Thanks!
Kriss.thank you Senthil ,
So ,i need to maintain 9amantnr key figure in BW As well ??Just i added this keyfigure in my pos and initialized the planning area .
Is it necessary to update infocube with 9amantr ??
Please suggest me .
Thanks!
Kriss -
Planning time fence and planning cycle
Dear Experts,
Please provide me the clarity on planning time fence and planning cycle in MRP 1 view with example as i am not able to understand the SAP definition
Regards,
Phalgun PatelPhalgun,
Planning time fence is a standard planning concept. Here is SAP's version
http://help.sap.com/saphelp_erp60_sp/helpdata/en/92/bf029544bd11d182b40000e829fbfe/frameset.htm
Also, from SAP help
Outside of the planning time fence, procurement proposals are created as usual in the planning run. When these procurement proposals move into the planning time fence, they are firmed automatically depending on the setting of the firming type.
I don't think I explain it any more clearly.
'Planning Cycle' can refer to several different concepts. Can you quote the difinition you are finding difficult to understand?
Best Regards,
DB49 -
Mass functions in Life cycle Planning
Hi Experts,
Does anybody know if there is method using which we can create mass like profiles, or atleast carrying out a mass assignment of Phase out profiles, or Like profiles, Phase in Profiles in the Assingments table in Life cycle Planning?
We ahve the following requirements:
1. Assign 1 Phase out profile to some 5000 products, how can we achieve this other than manually assinging in the assignments table.
2. Is there a way to create 100's of Like profiles at one time?
I am looking for first SAP stadard functionality t handle this or other wise develop some custom programs to do it. But I am not sure how much feassible this is.
I really want to know how companies handle these requirements of mass discontinuation using Phase out profiles in DP.
If nothing works out, I think copying products from an excel and pasting it in the assingments table and then assigning one Phase Out profile to these products and repeating this step for 5000 products will be my only option.
Please help.
RoopaThat select block functionality is the stupidest thing I have seen. I initially thought it was similar to 'select all' but it is not. Let's say you have 10 records & you want to select all. Then you select the 1st row and 10th row and if you use 'select block' then all records inbetween will be selected. You can then delete or copy them depending on your need.
The closest thing that I see here in assigning Like & PI/PO profiles is the 'Copy line' functionality. May prove helpful if you want to assign same like or PI/PO profile to many products. Ofcourse, you need to enter the products/characteristics but atleast the task of picking/choosing profiles can be minimized. Try & see how best you can use it in your mass assignment.
Hope this helps.
Cheers,
Srinidhi -
Dear Expert,
My clilent requirement for fleet equipments maintenance through both strategy(Timebased & Performance based) like that which earlier is first.we successfully started the multiple cycle plan for fleet equipment.but user want to know that how can we identify whose order came by which condition( timebase or performance order).while IP10 authorization can not give to client.
So,Please suggest how can we overcome this problem.
Regards,
AkhileshHi
User can check the measuringdocument aganist the equipemnt. It will give information that how much hour it has run.
If this is not reached as specified the it will be from the time based.
reagrds
krish -
Hi experts,
Plz tell me What is meant by single cycle plan ?how it works?
Thanks in advance.Hi
If you want to create plan for a single criteria single cycle plan should be used
For ex:
If you want to the maintenance for every 6 months
then create plan in IP41
Select maintenance order or Notification
enter
Maintenance plan cycle tab Enter 6 in Cycle/ unit & Mon in adjacent
Maintain offset as 0
fill the order needed and save
go to IP10 schedule it
If you want to creare plan for every 6000 hours
Then create a separate measuring point and document
Enter the measuring point no in counter
M.Alagesan -
Hi All,
Please let me know the process of configuring the planning cycles. Im copying the actual cycles to plan cycles. Should var. portion type to be plan statistical key figures.
Thanks,
Ama
Moderator: Please, search before postingHi Arith
For that to happen, you must turn on the "Real time FI/CO reconciliation"
Set up a real time FI/CO reco variant in which you will choose the "Cross PC"postings. Also, assigna GL account in the account determination. Finally, assign the variant to your Company Code..
With this, you can achieve the desired result
Br. Ajay M -
How to compute Maintenance Plan's Plan Date
Dear Gurus,
I would like to request help from you. I have a problem wherein I would like to know how is the Maintenance Plan's Plan Date is computed.
Below is the parameters of the Maintenance Plan:
cycle = 1500
offset = 1478
annual estimate = 5070
first meas reading = 22.5
Start of cycle is = Jun 16, 2011
The plan date computed is = Sept 7, 2011
Please let me know if there are other information needed.
I hope you can share your knowledge on my problem. Thank you.Hi,
Please note that for Plant date calculate in Counter Based Plans system takes the below into preference for calculation :-
1. Start of Counter reading value
2. Date of Last counter reading udpate ..
If you maintain offset then system first plans the offset then starts the cycle
If ur annual estimate is 5070 , if scheduling is done by time then daily activity is 5070/365 = 13.89 round to 14
Now if your start of counter reading value is 0KM
And if your date of last counter reading is :- 2/3/2012
Then your first planned date would be based on the offset :- 1478 -22.5 = 1455.5 /daily activity =1455.5/14 =104days
So counting 104days from 2/3/2012 you would getting your First Plan date ..
If u put call horizon as 100% then it will be in HOLD status
regards
giri -
Shifts, Work Plan, Rotation Plan - Projects integration in otl
Hi,
My client implementing OTL with projects, I need few informations.
1. Work shcedule can be generated for projects integration or it is only applicable for payroll integration. If possible with projects please let me know the steps to configure it.
2.What i understand from shift, work plan, rotan plan , holiday calender has to be attached to earning policy then assign to assignment. Earning policy can be created only when elements are there Am i right?
3.The scheduling Can we do it in payroll and projects based integration?
Client is expecting to autogenerate the timecards after it has been scheduled. I hope autogeneration with projects can be done only we have project resource management licene.(My client doest have one)
Appreciate your help.
Stalin GDefine Earning Policy
OTL Application Developer> Policies>Earning
Assign it to the employee using the following path
OTL Application Developer>Assignment Time Information
Thanks,
Srujan -
New plan version - Copy from plan to plan
Hello,
I copied a new plan version X from plan version 0 with KP97. Now I realized that only planning primary costs were copied. Is it possible to copy also the secondary costs (resulting from assessments) to the new plan version. If not, is it possible to copy the plan assessment cycles from version 0 to version X. Or can the existing plan cycles (KSUB) can be used for both versions (hoever I could not find a selection field where I can choose the required plan version)?
Thank you in advance for your feedback.
AliHi,
a plan assessment cycle contains CO-version information in its header date.
You can use KSU7 to copy a plan assessment cycle from version A to version B, just enter CO-version B in the header data of the copied cycle and ensure that in "sender values" the version is initial (thus the header data CO-version takes place).
BR Christian -
Hi All,
i am new to PS Module. i want to detailed infoamtion what is plan revenue,plan cost,actual revenue,actual cost,backlog bill/invoice, cte revenue, sales in excess of invoices,billing in excess 0f sales,gross margin, sga,net margain, net retention.
Thanks & Regards,
chandras.Planned Cost:
Cost that is expected incur in the project over the project life cycle. It is planned before start of the project. There could be revision to orginal plan during the life cycle.
Actual cost:
Cost the that is actual is incurrred in the project. for example Material Cost from PO and services cost from service entry.
Planned revenues:
Revenues that is expected to billed to Customer over the project life cycle.
Actual Revenues:
What is actually billied to the Customer.
Venkat
Edited by: VenkatSrinvas Konda on Oct 23, 2008 10:46 AM -
Std report to view planned price1, planned price date1 in view costing 2
Hello Guru
Is it possible to view planned price1, planned price date1 in view costing 2 in material master using standard SAP report when I select specific material and plant in selection screen ?
I really want standard SAP report but don't want to create my own query specific for this case
Any reply would be appreciated
ThanksHI,
In Table SE16N - MBEW you can get the planned price data.
Regards,
BK -
Change End date of billing plan/invoice plan in sales order item(fpla-erdat
Hi Experts,
Could you please help to me regarding this issue.
I need to change End date of billing plan/invoice plan in sales order item of "billing plan" Tab.( FPLA-ERDAT) for all line items. It is not a one sales order,more than 1000 sales orders.
How can i change those end date of billing plan for all line litems and all sales orders ( i have input file with sales orders, items, dates.)
Thanks
jayaHi ramki,
I tried with using MASS T.code ( bus2032 Object type).
There are no field related to Billing plan end date?.if case i done wrong ,tell me what are steps while using MASS T.code.
now what i can do. or explain
Thanks
jaya
Maybe you are looking for
-
How to get IDoc Status from WCF Service Adapter?
I have successfully transfered a strong typed Idoc to SAP using a BizTalk WCF Service Adapter. I did so based on this example: [http://msdn.microsoft.com/en-US/library/cc185231(v=BTS.10).aspx]. We are using the IDoc to create a purchase order. Th
-
TS1717 I cannot open Itunes.
Error message (translated): "The iTunes Library.itl can not be read, because it is created in a newer version of iTunes". I can not re-install iTunes as get error message that a newer version is already intstalled on my Mac. Pls help!
-
Today when i turned on my phone it was working fine. When i held down the "A" key to put it to sleep, i noticed that the 4 buttons on either side of the trackpad did'nt dim. (Back, Blackberry menu, answer call, & end call buttons). So i tried it agai
-
ITunes/iPhone help? not very computer literate
The answer to the error code I am getting is: Some iTunes for Windows users with the McAfee Personal Firewall Plus installed may display a -3221 error message when you try to access the iTunes Store using iTunes for Windows. If this happens, change t
-
I pod touch is frozen on hook to itunes screen
My i pod touch is frozen on the hook to i tunes screen after updating it and i tunes is not recognizing my i pod