Planning file entry question MD21

I understand that if i change a material mrp views or planning related master data then automatically i see netch indicator will be set in MD21.
in what cases does i see indicator set for reset proposals and bom explosion? in other words if i want to see reset prop and bom explosion indicators set in md21, what should i do?
I tried to read SAP help and it says
u2013 If you set the Reset indicator then planning dates which may be available (order proposals) are not reactivated even if the dates and quantities suit the planning situation. The system always creates new order proposals.
u2013 If you set the BOM explosion indicator, then available planned orders are taken over but the BOM is re-exploded.
But I am still confused.

Reset Prop
u2022 Changes to the lot size-independent in-house production time (MRP 2)
u2022 Change to the planned delivery time
u2022 Change to the scheduling margin key
u2022 Change to the MRP controller
Explode Bom
u2022 Changes to material BOMs, sales order BOMs and phantom assemblies
u2022 Changes to the dependency that is assigned in the BOM
u2022 Classification of a material
u2022 Changes to the production version in the material master or in the planned
order
u2022 Changes to or new key assignments of BOM explosion number
Do you feel clear enough?

Similar Messages

Updation of the indicators of NETCH & NETPL in Planning File entry(MD21)

Hi,
Can anyone explain me when the indicators-NETCH & NETPL will be updated in Planning File entry table(tcode-MD21) for a material in a specific plant .
Actually, we observed that these indicators are updated only when we do Goods Issue through backflush during Production order confirmation. If i do goods delivery using tcode-VL01N(mtype 601), these indicators are not updated in planning file entries.Can anyone suggest me what could be the reason for this.
Thanks in advance

Hi,
Please read below information.
"The planning file record for a material also has a u201C_net change planning in the current horizonu201D field which will be set if the change in the materials receipt or issue_ element is valid in the planning horizon. This indicator will help you choose only those materials which have undergone a change in the planning horizon; through the use of a planning key, in an MRP run, called u201CNet change planning in the planning horizonu201D.
Go to below link to understand more. It may solve your problem.
http://www.sapsword.com/home/learn-sap-pp/sap-mrp/sap-mrp-functionality/step-3---planning-file-entry-and-material-selection-for-sap-mrp-run
Regards / US

Question on Planning File entry

Hi all,
Whenever a material master is changed with relevant MRP data, there will be a planning file entry for NETCH, NETPL. And after the MRP run, it will be reset. So I would like to know whether the materials which are reset (there is not entry for NETCH, NETPL) will be considered for the next MRP run. When i see the list in MD21, i can see the materials without NETCH, NETPL.
So I would like to know when you run the total MRP (MD01), the materials which are reset will be planned or not? Or should we manually create the planning file entry?
Regards
Brijesh

Dear,
While running MRP, system will consider material which have planning file entry.
So I would like to know when you run the total MRP (MD01), the materials which are reset will be planned or not? Or should we manually create the planning file entry?
system won't consider the material in MRP run.
NO need to create planning file entry manually ( because that material does n't have any changes related to MRP, so if u create manually also, system won't plan)

Planning file entries missing for some materials in MD21.

Hi gurus,
when i check the MD21, i found that some materails are not having planning file entries i.e netch and netpl indicator .and because of this we found that these materials are not being in planning.
From my understanding these planning file entries were updated when the material was created.
I am not sure how these entries are missing. Please can any one help me find out the root cause for the same.
Thanks in advance.
Naveen.A

Dear,
Please note MRP has to be activated for plant level before creating materials in OMDU. Then only created materials will have planning file entries.
You can run planning file entries consistency check in background before the MRP run to create/delete the planning file entreies automatically from MDRE/MDAB transactions...This will be useful to avoid the re-planning of the materials ( if planning file entry is not deleted after MRP run) and also to plan material (if planning file entry is not created).
Regards,
R.Brahmankar

Planning file Entries

Hi Friends
When is a Planning File Entry is Created?? During the creation of Material master?? We have uploaded the material Master and found that there are few materials for which Planning File Entries are not createdu2026.. How can we overcome this?? Do we have to create the planning file entries using MD20??
Is there any views which are required for Planning file entry Creation?? Like MRP 1 u2013 4 Views should be there for Planning File entry Creations??
Please get back to me on the above.
Jade

Dear,
All materials assigned with MRP are automatically entered in planning file entry.
Depends on changes in material planning or in proposal , system will create planning file entry.
When MRP run system will consider only which materials having entry in above contents of planning file entry.
If the materials is created before activating planning file for plant, you must generate planning file entry for all material by tcode MDAB.
T-Code :
MD20 Create planning file entry
MD21 Display planning file entry
MDAB Set up planning file entry in background
MDRE Check planning file entry
For the first time (just before Go-live), it is advisable to create the Planning file entries mnually and execute the MRP.. This is to reduce the inconsistencies..
But, system will automatically Creates the Planning File entry, if the Material is relevnt for planning.
First time MRP Run with NEUPL will not consider the planning file entries..
So, after that every thing will be stream lined.
In rare cases systm may miss the entering the Material details in the Planning file
Regards,
R.Brahmankar

Planning File entry is missing

Hi Friends,
I have issues of planning file missing for material from Sales Order. We are using Reorder point planning(ZM) and new Item Category YP19 and No Production involved. I have followign questions.
1. Is Strategy make to order is to be defined in material Master when production is not there ?
2. MDAB / MD20 is mandatory to run every day to get planning file entry ?
3. I nconfiguration in sales distribution, Basic Function, Avaliability check and Transfer requirement, Transfer Requirement, Determination of Requirement types using Transaction, I am not finding the new MRP type, New Item category combination with Requirement type. is this reason for not creating Planing file entry. If so how to configure new Item categorya nd New MRP type in this configuration.
Please confirm to fix the issues.
Rgds
Madhavan

Dear ,
Please find the answer of your query :
1. Is Strategy make to order is to be defined in material Master when production is not there ?
Not really .You can use Planning Startgey 40 in this case .Basically , MTO means for all FG and SFG you will use 20 and dependent you will either keep 10 or blank .
2. MDAB / MD20 is mandatory to run every day to get planning file entry ? : If you have new materials created which have not under gone any MRP run so far , in that case you need to run MDAB/MD20 and carry out consistency check of the planning file MDRE.When ever you have new item created , it should have planning file entry .But when you run MRP , automatically , this planning file entry happens with Processing Key NEUPL.Please note that the PLanning file entry will be reset once the MRP is run. So you will not have an entry. When any change relavant to MRP is done the planning file netry is created automatically. You should then check the planning file before running the MRP.So it is always better to have Planning File Consuistency check before MRP run .
MD20 -- for singal material
MDAB -- Planing file entry in Background
MDRE -- check u r planing file entry here
3. I nconfiguration in sales distribution, Basic Function, Avaliability check and Transfer requirement, Transfer Requirement, Determination of Requirement types using Transaction, I am not finding the new MRP type, New Item category combination with Requirement type. is this reason for not creating Planing file entry. If so how to configure new Item categorya nd New MRP type in this configuration :
I do not think there is a relation between MRP type configuration with Requirement Type from SD.Basically requirement type linked with Planning Startgey Group to link wether we need to consider Customer Requirement or Customer Indepedent requirement with subsequenet set up copied from SD ( Accouting , Requirement Trasfer etc ) .
More oever , you are going to deal with ROP where , procureme nt proposal will triggered once availabity comes down reorder level ( either manul or forecast base automatica ROP) based on fixed recipet -PO,STO,Current stock and Demand -PIR,Sales Order.Now in your case , if you want to consider , Sales Order requirement , then it depnds on your re-order level and available stock .If the Re-order qty more than Sales Order qty , then it will trigger only ROP qty as PR .I think you need to test this scinario with stadars ROP MRP type in sand box and let us knwo your exat requirement in Question 3 .
Hope this is clear
Regards
JH

MRP AREA NETCH indicator missing in planning file entry

Hi,
MRP has been activated at MRP area level storage location level and there were no planning file entries for some materials because we were using the LSMW program RMDATIND for uploading the materials and there was no update flag for Planning File entries. Later we have updated the Direct input session with update Flag.
I already ran the MDAB and MDRE so by the missing planning file entries.
We are running the background job RMMRP000 for the MRP. There are some materials which are not being planned in the background job. When i run the MRP for the same materials in MD02/MD03, the procurement proposals are being created using MD02/MD03.
I checked in MD21, we can see the Planning file entries then there no indicator for NETCH.
What could be the reason?
Regards,
Kumar

hi
take t code-md20
flag required field
regards
gyana

OPPP change is not triggering planning file entry flag?

We use alternate BOMs for a particular subassembly and depending on requirements
shuffle between BOMs using a different alternate for a certain time period.
However when we change the alternate in OPPP it is not triggering the change in the planning file.
Is there something we are missing here.
Thanks in advance.

Dear ,
Frist of all , there is no such cutomisation to have planning file entry of any material.Planning files entries is the first step which checks by the MRP during the MRP run. if no entries are found for the selected parts then MRP will not plans these parts. You can create/check the planning files entries from T Codes-MD20/MD21 even before you creat FG BOM .
Planning file entries will be created automatically when you enter the relevent MRP type (example PD) in the material master MRP1 view. OR when there was a change relevent to MRP like stock change due to moveement type/GR/GI or change in material master data.
MRP does planning file rentry based on the MRP relevent changes like you have FG and valid BOM .Now based on the FG MRP4 BOM Slection Explosion method , MRP will explode the BOM from lowest level and there will be planning file entry while executing MRP on FG based on the FG requirement and dependent relation in BOM .
In you case , please check the following ;
1.Whether you have kept other alternative BOM status as Inactive-2 Iin CS02-BOM Header -Status long text and also re-assing this in Routing CA02 with correct valaidty .Check the validity of the BOM alternative which u have included for sub-assbly
2.You have all the material master parameters [MRP1-MRP4 view ] all in place specially MRP type PD, Procurement Type E or F
3.Specially , check BOM explosion /selection methods in SFG/FG level in MRP4-Sleection methoids should Blank or 1 BASED ON QTY OR maintain producxtion version with selection indicator 2 or 3.
4.BOM should have usage -1-Production , Status-1 -Active.
5.Run MRP-MD02-NETCH, 2,1,3,3,2
Check and come back
Regards
JH

Can MRP run without Planning File Entry?

Hi,
    I came across an issue where MRP is running accurately without any Planning File Entry for a material in E.C.C.6.
    My Understanding is MRP can NOT run w/o PFE u2013 which is a mandatory prerequisiteu2026..BUTu2026???
TRY itu2026   1.in OMDU find a plant where MRP is NOT active,    2. Create a Material with all required data (I used ROH, Proc.Typreu2013 F, Strategy u2013 70, Mixed MRP-1, Ind/Coll u2013 2)   3. Activate MRP for the Plant in OMDU.   4. Create Demand according to strategy (I used VSFB in MD61).   5. Run MRP & complete procurement as many times u want.   6. In this process anytime u can check in MD21 u2013 there is NO PFE.
     Can someone tell me what the reason / logic are behind? Is there any OSS note for it?

Dear ACCPP12,
1) in which t-code your running MRP, i suspect your running in MD02
2) MD02 & MD03 does not require Planning file entry
3) MRP gives results with out planning file entry by the above mentioned t-codes
4) where as if your going with MD01, then Planning file entry is required for materials
Regards
Madhu Kumar

Change Planning file entry

Hi,
How can I change Planning file entry or selection? For a material, earlier I have selected the following in MD20
1. NETCH
2. NETPL
4. Reset order proposal
5. BOM explosion.
Now I want to deselect BOM explosion , how can I do that?
Sincerely,
Ketan

Hi,
Run MRP in MD02 with Planning mode as 3 - Delete.
This will delete the planning file entry of the material
then create the planning file entry manually by
MD20 - Create planning file entry
MD21 - Display planning file entry
MDAB - Set up planning file entry in background
MDRE -Check planning file entry
Regards,
R.Brahmankar

No Planning file entry when materials received against production order

Hi,
Planning file entry is not getting created when I receive material from a Purchase order where account assignment category is 'F' - Order. In other words, the material is received against a Production Order.
We run MRP automatically through MD01 and it will not run for the material as there are no planning file entries.
MRP List MD06 shows the purchase requisition and the production order even though the production order requirement has been met.
Please help me out with this issue. I really appreciate the help the community members have given me earlier regarding my questions related with the planning file.
Sincerely,
Ketan

Hi Dhaval,
1st Scenario
When I receive material through a Purchase order and receive it into stock, then MRP is able to run because planning file entries are created when I receive the material and clear out the MRP list as the requirements have been met.
2nd Scenario
When I receive material through a Purchase order and directly against a Production order (Direct Procurement) , then MRP is not able to run as planning file entries have not been created even if the requirements have been met.
How can I prevent the 2nd scenario in future where production order and purchase requisition exist in the MRP List but since the material has been received against a production order therefore MRP will not run and clear out the MRP List?
Sincerely,
Ketan

MRP Run - Planning file entry Issue

Dear All,
We are facing one problem in MRP Run. We run MRP in the background for a plant (MDBT) System is not creating planned order for few component. I have checked all relevant setting. I found that planning file entry is missing. I would like to know that how system can miss the material? How system creates & delete planning file entry ? I have some data related to this.
Last MRP run date is 22-04-09
PIR changed date on 30-04-09
MDRE Run on the 30-.4-09 at night.
MRP Run on 02-05-09 at night.
Problem reported that no planned order for the material on 07-05-09.
We have huge number of material so its difficult to check all material individually whether MRP run happend or not ?
Please let me know the possible reason for this.
Thanks & Regards
Kundan Kumar

Dear,
If you carte materaial or uplod materail before activation plant for MRP this may be the cause for this.
Planning File creates all the materials relevant for the planning run.
The planning run and the scope of the planning run (which materials are planned in which planning run) are controlled by the planning file.
For planning file entry use the following transactions,
MD20 : Create planning file entry
MD21 : Display planning file entry
MDAB : Set up planning file entry in background
MDRE : Check planning file entry Please run this in it will solve your problem
All materials assigned with MRP are automatically entered in planning file entry.
Depends on changes in material planning or in proposal , system will create planning file entry.
When MRP run system will consider only which materials having entry in above contents of planning file entry. After MRP run system delete the planning file entry. And again material gone the changes like GI GR on any other demand then system generate planning file enty again.
Hope it will help you to understand basic concept.
Regards,
R.Brahmankar

Planning File Entry has Reset Procurement Proposal field marked

Dear Sir,
We are facing a problem that in the Planning File Entry , the Material has "Reset Procurement Proposal " field marked as "X" automatically . We desire that this fileld should be blank as a default .
Kindly help us on this issue pl .
Rgds
sonia agarwala

Dear ,
Basically ,when this indicator is set then the planned orders and purchase requisitions created by the systeem in the pre MRP run are deleted and recreated.
You can also control this from the MRP run transaction MD01, MD02, MD50. The same could be set in the planning files also. So even if you do not set it during running the transaction the planned orders and PRs will be deleted and recreated based on the following fields are changed.
1. In house production time.
2.MRP Controller
3. Schedule Margin Key.
4.Planned delivery time.
After making changes to the above mentioned fileds you can see the planning mode 3 Reset Order Proposals indicator in MD21.
So if you do not want this , then select Planning Mode Indicator -1 OR 2 in any MRP run like MD01/MD02/MDBT /MD03.
Planning Mode -1-Adop Normal Planning
Planning Mode -2-Reexplode BOM and Routing
Hope this is clear
regards
JH

PLANNING fILE ENTRY TABLE

Hi ,
If i want to find out the planning file entry for the materil , how can i find out ? please give me the table name .
Transaction code i knoe MD21 , MDre & MDAB , i want to see it on table lavel . In which table i will get this information . Please suggest ASAP .
Regards
Piyush

Hi ,
Some additional db table related to planning file entries:
DBVL                           Planning File Entry, MRP Area, Long-Term Planing
KBVM                           Individual Customer Planning File Entry, MRP Area
KDVL                           Individual Customer Planning File Entry, Long-Term Planning
KDVM                           Individual Customer Planning File Entry
I hope this helps you.
Please confirm.
Regards
Datta

Planning File Entry - Mass view

Hi,
Like MD21, which is used to view planning file entry for a given material, is there a transaction or report to view the planning file entries for multiple materials at a time..?
Thanks in Advance,
Sabitha

Dear Sabitha,
in MD21, do not give material just give plant & execute
it will display all materials
if you want check particular materials, then click, Control F & give material name
Regards
Madhu

Planning file entry question MD21

Similar Messages

Maybe you are looking for