Planning Filters problem

HI,
We are facing once problem while Planning Security doing pushdown.
Suppose if User left company then his Userid gets deleted from MSAD. But when we do pusdown in planning it gives us an error that User and Filter for users exists there. Currently we are deleting these Filters manually.
Is there any utility provided by Hyperion to sync Planning Filters security with MSAD.
Thanks,
Vishal

I see you have replied to this post :- Removing 'msad' strings for invalid users in Planning
Have you not tried the different options discussed in the post.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • Planning Refresh problem?

    Hi All,We have a planning refresh problem. Environment:Oracle repositories on UnixPlanning Server on Win2003Essbase on Win2000When we kicked a planning refresh, it shows that the database is refreshed and when pressed OK, it shows the following error" Object is not allowed when object is closed 3704".Thanks

    hi
    i found a solution for the Problem in another Forum
    http://businessintelligence.ittoolbox.com/groups/technical-functional/hyperion-admin-l/dynamic-calc-formulas-not-refreshed-1719379?cv=expanded
    The suggestion is
    1. change the Member from Dynamic Calc to Store
    2. Refresh (After these Step the Formulas where still out of sync)
    3. change the Member from Store to Dynamic Calc
    4. Refresh
    After these Steps the Formulas are in sync again.
    Kevin Kraft
    Edited by: Kevin Kraft on Mar 25, 2009 12:33 PM

  • Use of Planning Filters in Queries in NW2004s

    I was wondering if any Integrated Planning experts could help me with a problem I have.
    In the 'old world' BPS a planning layout was attached to a planning level and by using filters (planning packages) many different 'views' or slices of information could be made available to the user. For example I could create a planning layout for my balance sheet and create a number of filters for the different parts of my business.
    In NW2004s planning is now done in the query and the planning filter can be placed in the filter of the query. However this enforces a one to one relationship between the filter and the query which would mean I would need multiple queries for each of the parts of my business instead of the one layout under BPS3.x. Being able to create a variable on the filter would be one way around this but this is not possible.
    Can anyone advise on how this now works in NW2004s as at present this looks like a significant retrograde step in functionality.
    Cheers,
    R

    I have somehow managed to workaround the issue.
    I use one aggregation level without Stage field to allow users to modify the data and then I use another aggregation level with Stage field to process the Stages using planning functions and filters. This works.
    I am still curious on the user exit proposed by Andrey.
    Andrey can you please provide step by step on how we achieve this?
    Thanks,
    DV

  • Hyperion planning installation(Problem with application server deployment)

    Hi There:
    I am new to hyperion planning.I am trying to install planning.I got problem with Hyperion Configuration utility while configuring application server deployment.Its show message failed.Please guide me how to fix this.If it is possible can you please send me any personal documentation on installation.I am trying this for past 4 day's.Below is the error its showing in configtool
         ... 10 more
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, INFO, Validating dependencies...
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel$5, DEBUG, Product: Planning; Dependencies: []
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, DEBUG, task to execute: HspDBPropertyLocation
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, DEBUG, task to execute: applicationServerDeployment
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.PanelEventDispatcher, DEBUG, constructor
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryEnter
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebLogic 8.1; deployment type = both
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebSphere 5.1; deployment type = both
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: Tomcat 5.0.28; deployment type = both
    (Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryExit
    (Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, DEBUG, AppServer selected: WebLogic 8.1
    (Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.ProductCustomInputPanel, ERROR, Error:
    java.lang.NullPointerException
         at com.hyperion.cis.config.wizard.ProductCustomInputPanel.queryEnter(ProductCustomInputPanel.java:88)
         at com.installshield.wizard.awt.AWTWizardUI.currentBeanChanged(Unknown Source)
         at com.installshield.wizard.swing.SwingWizardUI.currentBeanChanged(Unknown Source)
         at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
         at com.installshield.wizard.Wizard$RunThread.run(Unknown Source)
    (Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, Starting WebLogic 8.1 deployment...
    (Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, pre-Deploy: Planning
    (Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, Deploy: Planning
    (Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    java.lang.NullPointerException
         at com.hyperion.cis.config.AppServerDeployer.initContexts(AppServerDeployer.java:628)
         at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:548)
         at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:526)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDeployerTask(RunAllTasksWizardAction.java:251)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:156)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Mar 09, 2008, 08:26:13 PM), com.hyperion.cis.config.wizard.CustomSummaryPanel, DEBUG, CustomSummaryPanel in queryExit
    Please help me.Email id:[email protected]
    Thanks
    Harsha.
    Message was edited by:
    user603943

    I think the installation of planning on Vista is difficult. As some of the files doesn't support even i am tired of doing that.
    But tell me one thing have you installed all other products , I mean Essbase, (server, client) , AAS and Shared services.
    Are they working good .
    I have formatted my system to XP and installed everything , but the problem is when i install planning it prompts me that IIS 5 should be greater other wise EPM will not install...
    there are lot of things with planning 1) i can't datasource as it is not highlighting when we configure with Shared services
    2) It does not create product instance .
    If any one can fix this thing by giving me a suggestions.
    Advance Thanks

  • HP Deskjet 3050A ALL-IN-ONE J611 series ---- mac filtering problem

    i have a HP Deskjet 3050A ALL-IN-ONE J611 and i cannot get my printer to connect wireless. Everytime I try to connect it it always tells me an error. The error says:
    Issue: MAC address filtering may be enabled on your wireless router.
    Solution: If MAC address filtering is enabled on your router you should disable it.
    The thing is i checked my router to make sure the MAC filtering was not enabled and it wasn't. So why does my printer keep telling me this? if i can get passed this problem i think it would connect. The MAC address is already stored in the router.
    [edited image by Moderator]

    Hi skhjr,
    Welcome to the HP Forums.
    I see that you are having an issue getting the printer to connect over the wireless network.
    So I can better assist you, please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Please write me back when you have time and I will be happy to help.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • E1200 - Ports not working and mac filtering problem

    If there was a way to give negative stars to this router, I would. As it is, the minimum rating I can give this product is one star, and that's one star too many.
    I was upgrading from the WRT54G, which is an ugly thing to look at, but a reliable workhorse nonetheless. I turned that in to a downstream switch in my comms hub.
    On the E1200, I flashed the latest firmware, used different Cat5 cables, and different laptops before committing to hating this product.
    The first time I reached out to Amazon, the Amazon rep gave me a Cisco number to call. Turns out, that's some shady mortgage refinance hotline. Try it for yourself! 1-800-666-1771.
    Now, the rant -
    1. Two out of four wired LAN ports don't work: What can be the fix for this?! The activity lights on ports 3 and 4 blink and suggest data transfer is taking place, but the wired laptop simply can't acquire an IP address and access the internet. Same result when I connect my Panasonic Blu-Ray player to ports 3 and 4. None of the Viera Cast features load.
    2. MAC filtering unreliable: The wireless routing works somewhat reliably, if and only if, one settles for the most basic security. If I only choose a password and WPA2 protocol, things work fine. If I add another layer of security (in my case, enabling MAC filtering and only PERMITTING gateway to listed MAC IDs), things break down. As soon as I disable MAC filtering, wireless access to authenticated clients is restored.
    3. Cisco customer service: The censored world we live in, compels me to criticize politely. TERRIBLE. Cisco website is unintuitive, and frustrating. There's no easy way to register your purchased product. The Cisco "registration" is intentionally misleading and deceptive. For all intents and purposes, it's just an information gathering tool for Cisco. Don't bother registering there, unless you love the idea of storing your personal information on their servers. Their phone-based customer service is apathetic and uninterested. My rep was so distrusting of my intelligence and motor control, that he simply wouldn't believe that I had selected "PERMIT" and not "PREVENT" as the option under MAC filtering. After he asked me the same question for the fourth time, I raised my voice, and he gave up the idea of checking for the fifth time.
    However, this review is a tale of two companies. I reached out to Amazon again. This time, I got a rockstar in the shape of Leanne C! She was incredibly helpful, and understanding. What's more, she set up my return without any hassle and this Cisco dud is on its way back. I'm a big fan of Leanne's and my confidence in Amazon is restored.
    I'm sure that i received a lemon. I've never had problems with Linksys products. Maybe others' experience is different from mine.

    In your case as port numbers 1 and 2 does not work, what you could have done a loop back test. To perform a loop back test you need to take an ethernet cable, connect one end of that cable to internet port and the other end to the non-working port on the router. If you get the led to glow on both internet and the respective ethernet port that indicates that the port is working fine.
    It could also be a sychronization issue between the above mentioned lan ports and the lan card of your computer. As a part of trouble shooting you can try to reduce the card speed of your lan card. Following are the steps to reduce the speed of your lan card.
    START--> right-click My Network Places and click Properties
    right-click on the device manager and click properties
    Click on the CONFIGURE button
    Select the ADVANCED tab and in the box under the header property select "speed and duplex" and change the value on the right to 10 mbps half duplex. A restart would be recommended after performing these steps.
    In the second half you said that after enabling the mac filter option the internet breaks down. Here, do you mean to say that the computer
    gets disconnected from the wireless network or it stays connected with a valid IP address but without an internet connection.
    Well, it is an unusual issue however you could have reset and reconfigure the router as you got the latest firmware upgraded on it.
    Steps to reset the router:
    Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.

  • Numbers filtering problem

    Hi guys,
    I have a problem with numbers' filtering function here.
    1. I have a table of about 150 rows and 6 columns.
    2. The data consists about 42 categories and I wish to sort out each item.
    3. when I chose the column and try to filter the table, I found there list only about 22 items on the pop-up list.
    where are those missing items ?
    Could someone help me with this?
    Mike

    2. The data consists about 42 categories and I wish to sort out each item.
    3. when I chose the column and try to filter the table, I found there list only about 22 items on the pop-up list.
    Though the pop-up (or drop-down or whatever it's called) list maxes out at only 22 or so items, you can work with larger numbers in the Sort & Filter panel at the right.
    SG

  • Planning filters in version 11.1.2

    Hi,
    I have a planning application created using epma in version 11.1.2. I would like to add some security filters. I gave done this and deployed. However, I cannot see where to assign access to dimensions within epma or planning. I assume this is possible. In classic it is.
    Thanks,
    Nathan

    Have you tried :- http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/acc_mema.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • The Contact List bug/ph number filtering problem f...

    Hi im facing a problem with my nokia N95 8gb. the problem is Contact list related.
    such as
    I have stored a number is like 01920803355 in my contact list.and the number has saved as "Enderson". But if i dialed a number like 01930803355 then its show Enderson during calling/Incoming.though the number 01930803355 has not saved in my phone/sim at all. I thing its a number/name filtering bug for N95 8gb. beacuse here in this two numbers 10 digit same and only one digit is different. but the phone does not recoginize.
    Plz Nokia Check it out......

    it is actually a feature more than a problem ... and this is not limited to N95 8GB ... I think almost all nokia phones will have the same problem .. Nokia phones compare the last 7 digits of a number and ignore the first digits ... so if there is two different numbers that have the same last 7 digits, your phone will assume it is the same number... I think the idea behind this feature is to ignore the international code so if you dial a number with or without the international code it will be the same name ...
    but in your case, you suffered from the over-smart of this feature
    Message Edited by fhd4 on 21-May-2008 02:49 PM

  • ALV filters problem

    Hi All,
    i have problem in ALV GRID. On my ALV output i have VBAK-VBELN. when i click on filters, and if i provide vbeln as '106789' instead of '0000106789' the output is not displayed. please let me know how to solve this problem.
    if i provide 106789, the output must be displayed.
    Thank you all in advance.

    Hello,
    set ST_FIELDCAT-OUTPUTLEN to the actual lenght of the field.
    regards,
    Naimesh

  • Final cut pro 4 audio filters problem

    Hi,
    I know there are a lot of discussions about this on these forums, but I can't find the solution.
    Here's my problem:
    I have installed FCP 4 and a USB mixer connected to my Powermac G5 (early 2005). When I start up FCP with the external mixer connected it crashes when loading audio filters, but when I disconnect the mixer it starts up just fine. Here's some info about my powermac:
    Model: PowerMac7,3, BootROM 5.2.4f1, 2 processors, PowerPC G5  (3.0), 2.3 GHz, 2.5 GB
    Graphics: ATI Radeon 9600, ATY,RV351, AGP, 128 MB
    Memory Module: DIMM0/J11, 256 MB, DDR SDRAM, PC3200U-30330
    Memory Module: DIMM1/J12, 256 MB, DDR SDRAM, PC3200U-30330
    Memory Module: DIMM2/J13, 1 GB, DDR SDRAM, PC3200U-30330
    Memory Module: DIMM3/J14, 1 GB, DDR SDRAM, PC3200U-30330
    Network Service: Ethernet (integriert), Ethernet, en0
    Serial ATA Device: Maxtor 6B250S0, 233.76 GB
    Parallel ATA Device: PIONEER DVD-RW  DVR-109
    USB Device: USB Keyboard, Logitech, Up to 1.5 Mb/sec, 500 mA
    USB Device: USB Optical Mouse, Logitech, Up to 1.5 Mb/sec, 500 mA
    USB Device: USB Audio CODEC, Burr-Brown from TI, Up to 12 Mb/sec, 500 mA
    The last USB Device is the external mixer. Its a Numark M6 usb mixer
    Thanks in advance
    Fabian

    Oh, too bad. But thanks anyways.
    Fabian

  • WBS Element filtering problem

    Hi All,
    We have one Z report, in this report project no and WBS elements are displaying properly. But when i am going to filter option it is showing object no. please give me any suggestion in filter option it has properly instead of object no.
    Eg.
    Project no. in Report output -
    > 5986-FGSDT-2009
    Project No. in Filter option -
    > 00069845   when filtering is showing like this.
    here in filter option also i want show as per output.
    Thanks in advance.

    Hi All,
    Got the solution from the below thread and problem solved also.
    http://scn.sap.com/thread/1917750
    Many thanks to Uma Naik.
    Thanks,
    Amit

  • More filtering problems

    Greetings,
    Yesterday, I posted a problem with finding an invisible filter. Many thanks to those who helped.
    Today, I have another filter problem. While searching, I noticed the same problem I had with an invisible filter, but this time when I implement the fix (i.e., open a filter HUD for a smart album, then click on the Photos item in the library) there is not an invisible filter, but rather the filter HUD contains the following line: "Source: Library Library."
    The searching appears to be normal when one of the "Library" fields is selected, but it may or may not be normal when the other "Library" is selected. The odd thing is that, when I search my hard drive, there is only one Aperture Library.
    One of the strengths of Aperture is the library functions, but I'm rapidly losing my trust in search results.
    Anyone know how to control the Library field?
    Many thanks,
    Rick

    The "Source: Library Library" line is the same as you show, but I also get the double library when filtering rules are being used.
    I tried opening the HUD of different smart albums to see if that made a difference. If the smart album filter HUD that I open is one of the "Library Albums," that Filter HUD displays "Source: Library," and when I click on the Photos item, that Filter HUD displays "Source: Library Library." If the smart album filter HUD that I open is for one of my projects, that Filter HUD displays "Source: Library {Project name}," and when I click on the Photos item, that Filter HUD displays "Source: Library Library."
    I'm having trouble re-creating the problem that initiated this query, but I'm still not getting expected results with searching. If I open a filter HUD for a smart album, then click on the Photos item in the library, there are no invisible filters being applied. The only filter checked is Rating, and when the rating is greater than or equal to "unrated," all of the photos are present. So far, so good.
    However, if I go through the process of checking for an invisible filter (i.e., open a filter HUD for a smart album, then click on the Photos item in the library), and then add a text filter criteria to the open HUD, say the street name, "Celetná," Aperture correctly finds 32 items. If I go through the process of checking for an invisible filter, close the open HUD, and then enter Celetná in the search box in the upper right corner of the brower, Aperture only finds 9 items. Similarly, if I go through the process of checking for an invisible filter, close the open HUD, and then re-open the HUD by clicking on the icon in the upper right corner of the brower and entering Celetná into the text filter, Aperture finds 9 items.
    I hope this is clear. Any ideas?

  • In Hyperion planning navigation problem

    In Hyperion when you click Navigate – Applications the planning box does not show up the first time and/or it freezes

    That's correct. It happens for the first time when you just recycle the services. In some cases, when you just log-in. But only for a short while.
    It might be because of two reasons
    1. If you recycled, web servers communication is just being established when you click on Navigate the applications or administer.
    2. If you just logged in, clicking on that might require loading some data through ajax
    Is your problem any more critical than this?
    Cheers,
    Alp

  • Digital filtering problem

    I am doing a continously data acquisition (buffered) and digital filtering.
    I need a bandpass from 300-3000hz.
    I am sampling around 15000 hz.
    My data acquisiton is working fine.. but I have no clue why this filter is not working!
    I have seen allthe examples and I dont think I have dont anythign different ...
    Can anyone point out what is my error?.
    I did some debuging and i think something is wrong with the case structure in processing.vi..No data maniputaltion wihtin th case structure is working ...
    Have attached the files
    thanks
    Clueless :-(
    Attachments:
    datacquisition.vi ‏95 KB
    processing.vi ‏92 KB

    hi david
    thanks for your reply.
    I used the single stepping technique and I now see that the status of the error is FALSE but the code number is 10803. Just as u had said!
    This warning is generated in the first vi that is AI Configure.vi.
    I tried looking up this warning but it was very vague.
    it says
    NI_DAQ LV: The ongoing transfer has been stopped.This is to prevent regeneration for output operations, or to reallocate resources for input operations
    The source is AI Group configure.
    I tried what you suggested and removed the code condition and it works!
    But I would like to know if it is okay If I remove the
    code from the OR condition.I saw the example of MY DATA PROCESSINg.vi and in that they have wired the code to the condiiton.
    Can there be
    any warnings for which it would not be advisable to continue executing?
    Also I would be very very grateful if you could tell me why am I getting this warning to avoid future problems..
    thanks again..

Maybe you are looking for