Planning for plant Maintenance and CS (MCB)

Hi there
We are looking into implementing the Budtet Planneing for Plant Maintenance and Customer Service (MCB). However vi lack som information regarding the complexicity in this solution.
Does anybody knowledget about the time and resources needed for implementing this?
Chris

Hello Chris,
this is like asking how much a car costs. It's not possible to answer it with a lot more information about the business requirements.
Regards
Marc
SAP NetWeaver RIG

Similar Messages

  • Budget Planning for Plant Maintenance

    Explain functions for Budget planning through SAP BW-BPS (SAP Business Information
              Warehouse)

    SAP has the MCB functionlity for this.
    With maintenance cost budgeting (MCB) functionality, SAP offers a product life cycle management cross-application component supplying a solution for planning a maintenance cost budget. A MCB in general is a budget for all costs for maintenance, inspection, and repair of technical assets. In the stricter sense of SAP R/3 software, a MCB is a budget for PM order costs.
    MCB provides the following planning scenarios with pre-configured standard entries:
    - The history-based scenario is history-based and the budget categories are combined in one overall planning scenario. This scenario can create records with budget categories “preventive”, “planned” or “unplanned.”
    - The ad-hoc (hist) scenario
    - The maintenance plan scenario is zero-based and can only create records with budget use “preventive.”
    - The task list scenario is zero-based and can only create records with budget use “planned.”
    - The ad-hoc (plan) scenario is zero-based and can create records with budget categories “planned” or “unplanned.”
    The benefits of an appropriate budgeting tool include:
    - Tool to drive down maintenance costs
    - Better data integrity than spreadsheet-based budgeting
    - Access to your plan data from everywhere with a user-friendly front end (Web interfaces)
    - Ability to reflect changes in near future
    - Flexible and accurate reporting
    - Integration with other enterprise systems
    - Data extracted automatically from back-end system
    - Reduction of the budget preparation time
    - Continuous planning with standardized, automated budget processes
    - Better transparency of the budget planning process
    - Support of planning as a company-wide effort, with a great number of managers and employees contributing
    - Not just a tool but analytical applications
    Regards,
    Paul

  • Catalog Interface (OCI) -  Customizing for Plant Maintenance order  ERP2005

    Hello Experts,
    we want to use the integration between SRM and ERP2005. In the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/5d/0eba5fa0084247acbb0c04cede18e8/frameset.htm">sap documentation</a>sap documentation I found the following:
    'In the Customizing for Plant Maintenance and Customer Service or in the Customizing for Project Systems, you entered the required data about the catalog that you want to connect to the SAP R/3 system. You can find the corresponding IMG activities under Interface for Procurement Using External Catalogs (OCI).'
    However I can`t find this IMG activities in our ERP2005 system.
    What`s wrong?
    Thanks in advance.
    Regards
    U. Wieland

    Hi! Additional we had to generate the img new.
    Unfortunaetly I haven`t a idee how does this work. (Our sap basis did this.)
    Through the assign from catalog to order type, I think it nessary to use the pm-img-activities...
    Plant Maintenance and Customer Service
    ->Maintenance and Service Processing
    ->Maintenacne and Service Oders
    ->Interface for Procurement Using Catalogs (OCI)

  • Plant Maintenance and Work Clearance Management

    Where can i find functionality info on Plant Maintenance and Work Clearance Management. How can these functionalities be activated  - is there a switch?

    Please go thr below SAP Help links for Plant Maintenance and Work Clearance Management.
    http://help.sap.com/saphelp_47x200/helpdata/en/2b/1b713896fab752e10000009b38f889/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/2b/1b713896fab752e10000009b38f889/content.htm

  • Upgrade on SAP Plant Maintenance and Product Data Management

    Hi Gurus,
    I assigned to a upgrade project for Plant Maintenance and Product Data Managemet modules.
    Please guide me what are the steps to follow and provide more information on this ...
    Thanks in advance!!!!!!!!!
    Regds,
    RK

    Hello Kurni,
    In PDM/PLM latest version is PLM 7.0.
    There are many new functionalities available in this version.
    Earlier version can be accessed from SAP GUI, but the latest one can be accessed from Portal/NWBC.
    DMS side many notes have to be applied as you will be instaling EHP4.0 as part of the upgrade.
    ECM side some standard reports are missing in PLM 7.0, which were available in ECC6.0.
    Regards
    Prasad K

  • MRP VIEW For Plant Maintenance

    Hello friends,
    My Client require Minimum Stock of Spare Parts in Maintenance Store and when ever the minimum reserve quantity hit an automatic PR will generate and the purchase deptt. can Procure. so what will be the MRP View for Plant Maintenance in this scenerio and what will be the configration.
    Thanks
    Neeraj Gupta
    Edited by: neerajj0 on Jun 11, 2010 11:33 AM

    Hi,
    Material Master will be maintained by MM people. For Spare parts, material type would be ERSA. Maintain the MRP type for Reorder Point Planning in MRP1 view of Material Master & Reorder Point Qty in MRP1 view.
    While running MRP, spare parts also will be planned.
    Regards,
    Maheswaran.

  • Setting up MRP parameters for plant A and plant B

    hello,
    how could i Modify production plant parameters in order to run MRP for plants A and B (Option "Carry Out Overall Maintenance of plant parameters" in the manufacturing customizing).
    thanks
    JJ

    Use can define this in follwing SPRO path->Production->Production Planning->Material requiement planning->planning-define scope of planning for total planning.
    In this you can maintain both plant for scope of planning.
    Regards,
    Ajay Nikte

  • What are the standard tables for plant maintenance in r/3

    I need the list of standard tables for plant maintenance in r/3. and also
    is there any way we can find the field name  and table which it belongs to in r/3,  based on the description of the field.

    I NEED THE FIELD NAMES FOR FOLLOWING FIELDS AND CORRESPONDING TABLE NAMES
    Equipment status
    registration number
    insurance type
    insurance type description
    registration date
    expiry date
    insurance companies
    expiry date
    policy number
    amount insured
    premium paid
    created by  ..so ..on
    for our report in PM  .. insurance data report
    THANKS

  • Settings for costing data in order types for plant maintenance

    i want to know the purpose of settings for costing data in order types for plant maintenance. do we need to do it for sure i mean are those settings mandatory to analyze the costs on work order

    Yes you need to maintain those settings, as the plant maintenance orders are also considered as cost objects and in order for you to post any cost, you need to have a cost object.  Unless you maintain these settings, the cost you posted cannot be settled to a cost center.
    Assign points as a way to say thanks.
    Madhav Nanduri

  • Origin Object Type for Plant Maintenance Orders in Profit Center Accounting

    Hi,
    I want to make a selection for plant maintenance orders in transaction KE5Z, report for line items in Profit Center Accounting. When checking possible input options for the selection field <b></b>Origing Object Type<b></b> the system shows value 15 for Maintenance Orders. However I discovered in our system the maintenance orders are reported as Origing Object Type 03, which is Overhead Orders according to the selection list. So I cannot distinguish between overhead orders and maintenance orders in this report.
    What is the cause our maintenance orders are assigned to Origin Object Type 03 in stead of 15 and what is the customizing transaction to correct this ?

    Looks like, this is no longer supported. Refer to note 168004 and  102434.
    Cause and prerequisites
    These functions were not programmed to meet the above requirements.
    As of Release 4.0, the object type is transferred directly.
    Solution
    Once you have implemented the advance correction. the origin object type 'Overhead cost order' (03) is assigned irrespective of what is the SCOPE for orders.
    As a result of implementing this note or as of Release 4.6B, the order category distinguishes between overhead cost orders and production orders in the origin object type. In this case, the following origin object types result (as described above in 1.):
    Order category 04 to 10, 40 => 04 (production order)
    All other order categories => 03 (overhead cost order)
    The logic that the origin object type was set depending on the object class (as described above in 2.) is no longer supported. The object class can be evaluated separately in Reporting. -
    The corrections of this note refer in Release 4.0B to the corrections from Note 102434.

  • Define Purch. Req. transaction type for Plant Maintenance Order

    Hello,
    Does anybody know how i can specify the (default) Purch. Req. transaction type for a Plant Maintenance Order (IW31)? By default it picks up 'NB' but i would want to change this.
    Kind regards,
    Tim

    Hi,
    Go to this menupath spro>IMG->Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders>General Data>Define Account Assignment Cat. and Document Type for Purchase Requisitions.Here you can change the doc.type for the PR.
    Regards,
    Venkatesh

  • Using SmartForm for Plant Maintenance service order processing

    Greetings everyone,
    I am working in R/3 4.6C and I have a SmartForm that I would like to configure as a shop paper in plant maintenance and print along with various types of work orders.  However, the config in this area only allows configuration of SAPscript forms with print programs and form routines. 
    Does anyone know if there is a way to configure or convert a SmartForm so that I can print it as a PM shop paper?
    I will definitely reward helpful answers/solutions.
    Thanks,
    Geoff

    Thanks for the quick response, Anji.
    So just to be sure, there is no way I can configure this form to work with the shop paper config, correct?  If I want something to automatically print with different work order types, I guess I have no choice but to use a SAPscript form with a print program?  I am just not clear on what you mean when you talk about the Z t-code, since I never want to execute this form directly, but always automatically in work order printing from IW32 or similar transactions.
    Thanks..
    Geoff

  • CATS for plant maintenance

    Hi Guys,
    I need your advice:-
    We are on ECC 6 environment, the time system is running on 3rd party and payroll is on r/3, now the management decided to Implement CATS for plant maintenance (Activity based cost). So let me know is there is a feasibility to do so. If so, Please advice, your help will be greatly appreciated.
    Thanks,
    Babu

    What type of time evaluation do you do ? PM
    CATS are very much feasible with PS and activity types and you can transfer costs against activities, orders, networking elements and WBS elements. --Understandable
    You said Time is captured by third party, which sub system is this? Legacy
    CATS doesn't have any relation with 3rd party, ---Understandable. My? Can we make two process same time. Legacy and CATS ( My concern is about IT007 and Work schedule)
    CATS users are different from swipe card users: Understandable
    it depends on your design and requirement to comment on the feasibility at your end.
    but on a general scale , CATS is feasible in transferring activity based cost and post it into FI and CO: Understandable
    Requirement: 
    Need to implement CATS, to get work order, Time, and Employee name etc.
    My question is where in SAP I can store the data enter through CATS, If I use IT0007, I may redundant the data at HR side which is using 3rd party data to run payroll, or using 2001, 2002 and 2005.
    So,  How can I use CATS Independently. Please advice. Thanks

  • Standard Web service for Plant maintenance

    Hi Gurus,
    I am new to Web services.Could you plese let me know is there any standard web services for Plant maintenance?
    Thanks & Regards
    Bhuvana

    Hi,
    This is the mail which i got from Client.
    We have a prospect wanting to see a proof of concept (and pay for it) of SAP -GIS integration using web services. No specific requirement. Fetch a bunch of work orders from SAP using web service and display on a map - can be the POC.
    Please review the attached doc. Figure out whether any standard web service is available, if not a BAPI can be converted to web service quickly.
    Attchment contains Utilizing State oriented Communications
    for Web Services based on BAPI With Microsoft Visual Studio
    2005.U can check it in Google with the same name.
    They just asked about is there any Standard web services available for Plant maintenance.
    Regards
    Bhuvana

  • Does anyone have material for plant maintenance

    does anyone have material for plant maintenance, both configuration and theoratical concepts will be helpfull

    The most easily and freely documentation is at http://help.sap.com
    thanks
    Bala

Maybe you are looking for

  • My printer will NOT print most of the time.

    Help me make the printer get the message from my laptop!!! My light on the printer just flashes. If I shut down and restart my laptop most of the time it will then print out my info. My printer is a HP  D1660. My laptop is a Dell Inspiron with window

  • Ok did some troubleshooting still NO GO

    OK iChat will not work video or audio on my new Intel iMac works text though. Eliminated my router/WAN by doing an audio chat w/my G5 iMac. Eliminated AIM by having my Bro log on to one of laptops via AIM and log on to his other laptop using my info

  • Setting Display Size in X

    Connecting a laptop to a new 42" Panasonic monitor (TC-L42E60), I found the display to be blurry. xrandr shows this line: HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 698mm x 392mm Use the same hardware, on my co-worker's

  • Transfer from iTunes back to iPad

    When I plugged in my iPad to my new authorized computer, all of my sogns were removed.  How do I transfer them back from iTunes to my iPad?

  • Oracle SQLPlus problem

    was working on xp until i installed my broadband modem...getting the following error.. ORA-12514: TNS:listener does not currently know of service requested in connect descriptor