PLANNING HIERARCHY OPTIONAL FIELD

Hi Gurus
I have one scenario iam maitaining a Planning Hierarchy against my customised information structure
It has the following characteristics
1) Sales Org
2) Sold to Party
3) Material Group1
4) Distribution Channel
5) Division
6) Material
7) Plant
During Planning Hierarchy creation by MC61 i don't want to enter the MaterialGroup1 and Sold to Party for some Materials,
But the system not allowing me to do that and saying "Enter charateristic values without gap"
Is there any setting possible to keep those charateristic value entry as Optional for our required characteristic fields
Your early response is highly appreciated
thanks
K.Prabakarn

Hi
I don't think we can skip any of the Charactristics levels above , If you think it is absolutely necessary to create the Planning heirachy only for the combination of sales org and below without the Sold to Party and Material Group, PLease change the order of the characteristics like
1)Sales Org
2) Material
3)Distribution Channel
4) Division
5) Sold to Party
6) Material Group
7) Plant
In consistesnt planning it doenot matter How they are sequenced.
Reward if you like the solution

Similar Messages

User defined characteristics for planning hierarchy

Hi Experts,
I am using flexible planning for sales planning when I define a planning hierarchy, I want to include a user defined field also.
The requirement is like this, Planner wanted to see the cumulative sales figures of domestic and exports (Exports will be to more than one country. So I cant use countries for this).
How can I do this?
Request your expert advice.
Regards

Hi Ram,
Thanks for the reply. Since Iam using flexible planning, I will be creating a user defined info structure. But my question is can I include a custom defined characteristic also in the hierarchy which is not available in the field catalogs for characteristics system is showing?
If so where should I define this characteristics first before assigning to the information structure.
Thanks & Regards
Enrico

Planning Hierarchy

During the creation of planning hierarchy, after entering the info structure system is generating an error stating that No planning type is maintatined. I don't have much idea on this.. Can any one explain me how to create a planning hierarchy?
I want to change the fields in existing planning hierarchy? Can i change it?

Hi Naren,
See if this infostructure entry is there in the following config task. If not, you need to add or ask someone to do it.
Implementation Guide for R/3 Customizing (IMG)
-->Production
   -->Sales & Operations Planning (SOP)
      -->Master Data
         -->Set parameters for info structures and key figures
Alternative path to the same task is
Implementation Guide for R/3 Customizing (IMG)
-->Logistics - General
   -->Logistics Information System (LIS)
      -->Planning
         -->Master Data
            -->Set parameters for info structures and key figures
Srinivas

Year/Annual planning/view option in iCal

I would like to find a way to print a Year/Annual planning/view option in iCal, but I could not figure out a way to do it.
Does anybody knows how to do do it?
If it is not possible, can anyone recommend a script/plugin to achieve it? Or another software that can import iCal calendars and then print Year/Annual planning/view?
Thanks,
Anselmo

Me too! Please please someone reply to this request! This is a vital option that needs to be made available as a view AND print option.
Some small improvements to the print dialogo window would also be appreciated:
I think it would be more efficient if the calendars/subscriptions to print were all OFF by default: I would imagine it is more often the times you are printing a selected calendar, rather than all of them together.
The frame containing the calendars also needs to be expandable making them all visible at a glance. Scrolling through lists in a dialog is a no-no (or for Windoze).
Thanks for any help on this.

Header Fields Layout- Hierarchy of Fields is not proper in Order Proposal

I have used the BADI /FRE/IF_EX_UI_RWB_BADI_004~GET_OPTIONAL_HEADER_FIELDS to set the visibility and hierarchy of fields .
Currently the layout I am getting is as follows
1
2
3
4
The desired layout is as follows
1 2
3 4

You can get Top-of-page easily by using the following code.
DATA: it_list_top_of_page TYPE slis_t_listheader,
          it_events TYPE slis_t_event,
          gs_layout TYPE slis_layout_alv,
          lwa_line TYPE slis_listheader.
FORM list_header USING lt_top_of_page TYPE slis_t_listheader.
lwa_line-typ = 'S'.
lwa_line-key = text-105.
CONCATENATE sy-datum+6(2) '.'
              sy-datum+4(2) '.'
              sy-datum(4) INTO lwa_line-info.
APPEND lwa_line TO lt_top_of_page.
CLEAR lwa_line.
lwa_line-typ = 'S'.
lwa_line-key = text-107.
lwa_line-info = sy-uname.
APPEND lwa_line TO lt_top_of_page.
CLEAR lwa_line.
IF gt_merge_01 IS INITIAL.
    ld_linesc = 0.
ENDIF.
lwa_line-typ = 'S'.
lwa_line-key = text-108.
lwa_line-info = ld_linesc.
APPEND lwa_line TO lt_top_of_page.
ENDFORM.                    "list_header
*&      Form top_of_page
      text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = it_list_top_of_page
ENDFORM.                    "top_of_page
PLZ REWARD POINTS IF HELPFUL.....

How can i (de)activate a single option in an option field programmatically?

To deactivate a control in the front panel i can use the deactivate property node.
Can i also deactivate single options in an option field or in a menu this way?

mathan wrote:
Hai,
It seems you can only deactivate the whole menu ring(Create 'visible' property node and wire a true constant to it and also in FP right click and select 'disabled' from 'advanced' ) and not a single item in it.
Really?
Message Edited by smercurio_fc on 04-22-2008 09:16 AM
Attachments:
disabled.PNG ‏26 KB

Tax Jurisdiction in SAP CRM 7.0 B2C Webshop as an optional field.

Hi Everyone,
We are trying to register a user in B2C Webshop .In the process of registering, On entering the postal Code and corresponding city , the application shows an error message which says " Tax Jurisdiction could not be detremined" .
Going ahaed, we could like some clarity on the same .It would also be relevant if we could make this postal code/City as an optional filed in the System.We need clarity on making this as an optional field.
KIndly give your inputs if any one has worked on the same functionality.
Thanks in advance.
Regards
Sanjib paul

See if the configuration settings at (Tcode SPRO)
CRM--> Master Data --> Business Partner --> Specify handling of error messages helps.
Also see my replies in other threads on suppressing or showing CRM messages in the web (ISA) layer.
Re: Product not viewable in catalog nor in search function but still orderable
Re: Minimum order quan - CRMC_MSGC
Re: Minimum order quan - CRMC_MSGC

Tax Jurisdiction In B2C Webshop (SAP CRM 7.0) as an optional field.

Hi Everyone,
We are trying to register a user in B2C Webshop .In the process of registering, On entering the postal Code and corresponding city , the application shows an error message which says " Tax Jurisdiction could not be detremined" .
Going ahaed, we could like some clarity on the same .It would also be relevant if we could make this postal code/City as an optional filed in the System.We need clarity on making this as an optional field.
KIndly give your inputs if any one has worked on the same functionality.
Thanks in advance.
Regards
Sanjib paul

See if the configuration settings at (Tcode SPRO)
CRM--> Master Data --> Business Partner --> Specify handling of error messages helps.
Also see my replies in other threads on suppressing or showing CRM messages in the web (ISA) layer.
Re: Product not viewable in catalog nor in search function but still orderable
Re: Minimum order quan - CRMC_MSGC
Re: Minimum order quan - CRMC_MSGC

Invalid value in OPTION field of value table for IN itab operator. operato

Hi,
I am working on SELECT-OPTIONS to accept single and multiple values for company code. I am using CREATE_RANGE_TABLE and ADD_SELECTION_FIELD and all is good but I was prompted with error "Invalid value in OPTION field of value table for IN itab operator. operator" when I enter 2 single value.
SIGN OPTION LOW HIGH
    |      |CN01|    |
    |      |SG02|    |
However, below combinations working good for me and I don't get the above error.
SIGN OPTION LOW HIGH
I   |BT   |CN01|CN02|
     |     |SG02|    |
SIGN OPTION LOW HIGH
     |     |SG02|    |
I am using below coding.
DATA:
    ls_cmp_restrictions TYPE if_wd_select_options=>t_complex_restrictions,
    ls_rsoptions        TYPE rsoptions.
CLEAR ls_rsoptions.
ls_rsoptions-bt = abap_true.
ls_rsoptions-cp = abap_false.
ls_rsoptions-eq = abap_true.   " for enable only single value*
ls_rsoptions-ge = abap_false.
ls_rsoptions-gt = abap_false.
ls_rsoptions-le = abap_false.
ls_rsoptions-lt = abap_false.
ls_rsoptions-nb = abap_false.
ls_rsoptions-ne = abap_false.
ls_rsoptions-np = abap_false.
ls_cmp_restrictions-m_exclude = ls_rsoptions.
CLEAR ls_rsoptions .
ls_rsoptions-bt = abap_true.
ls_rsoptions-cp = abap_false.
ls_rsoptions-eq = abap_true.   " for enable only single value*
ls_rsoptions-ge = abap_false.
ls_rsoptions-gt = abap_false.
ls_rsoptions-le = abap_false.
ls_rsoptions-lt = abap_false.
ls_rsoptions-nb = abap_false.
ls_rsoptions-ne = abap_false.
ls_rsoptions-np = abap_false.
ls_cmp_restrictions-m_include = ls_rsoptions.
* Create a reference to range table
lr_field = wd_this->m_helper->create_range_table( `BUKRS` ).
* Add the select-option to the group
wd_this->m_helper->add_selection_field(
    i_id                         = `BUKRS`
    i_value_help_structure       = 'P0001'
    i_value_help_structure_field = 'BUKRS'
    it_result                    = lr_field
    i_no_intervals               = abap_true
    i_no_extension               = abap_false
    i_complex_restrictions       = ls_cmp_restrictions
    i_use_complex_restriction    = abap_true ).
FREE lr_field.
Edited by: Girish Nabar on Jul 22, 2011 12:35 PM

Hi Girish,
People are answering not for points, just to share the knowledge.
And I think the way of structure is wrong. i think we cannot pass two single values in your way. am not sure about .
low means it will accept single value. for one record in sign structure.
wait for other replys.
Regards
Srinivas

How to hide the select-options fields on radiobutton select in webdynpro

hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement below

Hi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k

How to use Abap Editor(SE38) Test Plan Management Option

Hi,
I am trying to use the Test Plan Management option in Abap Editor.
I could not find any articles/forum postings about it.
Please guide me on the same.

hi,,
go through the below link for help.
http://help.sap.com/saphelp_erp2005vp/helpdata/EN/06/27185efc5211d1bcfd080009b4534c/frameset.htm
regards,
bhavana

Planning Hierarchy Maintenance with Gaps

Dear Experts,
Iam using flexible planning for sales plan. I am using flexible planning. I wanted to create planning hierarchy with Gaps. I mean at some levels I will not be having any data to enter. For eg. My first level is country and second level is region. I will not have region for some countries. So when I maintain the planning hierarchy I will not have any value at the region level for a country.
How can I achieve this. When I dont enter any value, system throws the error message, enter the values without gap.
Thanks in Advance
Prathib

HI There,
SAP does not allow maintaining Plng Hier with gaps coz that breaks the planning chain. We had a similar situation & we made up "distinct" dummy values at that level & plugged them in.
The values need to be distinct for each level/segment/CVC (unique), else it'll mess up the planning. The aggregation/dis-aggregation would go for a toss, if the system finds a common value at one given level.
Bottom line, the Planning Hierarchy structure cannot converge at any intermediate level with a common value, it has to be a pyramid structure.
Good Luck

Default Current year in select option field on selection Screen

Dear Experts,
I want to set current year as default value in fiscal year select-options field on selection screen.
for this, i hv written following code
DATA:VAR_DATE TYPE SY-DATUM.
DATA VAR(4) TYPE C.
VAR_DATE = SY-DATUM.
VAR = VAR_DATE+0(4).
this retrieves current year .
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT VAR TO VAR..                            "Fiscal Year
SELECTION-SCREEN END OF BLOCK B1.
Now when i am executing program pop-up is raised describing "Specify the range Limits". Please help.
Regards,
Apoorv Sharma

>
Ganga Bhavani R wrote:
> Use below lines.
>
> SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
> SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT SY-DATUM+0(4). "Fiscal Year
> SELECTION-SCREEN END OF BLOCK B1.
Hi, Ganga,
I think it will not working properly that way, Please test the bellow Sample Code.
TABLES: anlc.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS i11 FOR anlc-gjahr .
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
IF i11[] IS INITIAL.
    i11-low = sy-datum+0(4).
    APPEND i11.
ENDIF.
Thanks and Regards,
Faisal

Disable the Select-options field in the viewcontainer

Hi,
I have two select option fields(Date,Number) in a viewcontainer .
Now i need to disable one of the select-option field(Date) in the view container based on the condition.If I give Enability for the view container then both the select options will get diasbled.Is there any way to disable only Date select-option field in the view container.
Thanks in Advance.
Regards,
bala.

Hi,
I just tested this solution and it is working for me....Following on Thomas's suggestion...I did the following....
I just had one select-option on my scr...but it can be done with two too...
step1:
created three attributes at component level under the attribute tab ( as suggested by Thomas )
ENABLE_PRI_SELECTOPTION type WDY_BOOLEAN
M_HANDLER type ref to     IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type ref to     IWCI_WDR_SELECT_OPTIONS
Note: all are with public check box checked....so that all your views can see these attributes
I created a method at componenet controller leverl: create_select_option....in this method i have following code:
DATA:
lt_range_table TYPE REF TO data,
* rt_range_table TYPE REF TO data,
read_only TYPE abap_bool,
typename TYPE string.
DATA:
lr_componentcontroller TYPE REF TO ig_componentcontroller,
l_ref_cmp_usage TYPE REF TO if_wd_component_usage.
* create the used component
l_ref_cmp_usage = wd_this->wd_cpuse_select_options( ).
IF l_ref_cmp_usage->has_active_component( ) IS INITIAL.
    l_ref_cmp_usage->create_component( ).
ENDIF.
* get a pointer to the interface controller of the select options
*component
wd_this->m_wd_select_options = wd_this->wd_cpifc_select_options( ).
* init the select screen
wd_this->m_handler = wd_this->m_wd_select_options->init_selection_screen( ).
* create a range table that consists of this new data element
lt_range_table = wd_this->m_handler->create_range_table(
i_typename = 'PERSNO' ).
* add a new field to the selection
wd_this->m_handler->add_selection_field(
i_id = 'PERSNO'
I_VALUE_HELP_TYPE = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
I_VALUE_HELP_ID = 'ZHELP_WDA_PERNR'
I_NO_INTERVALS = abap_true
it_result = lt_range_table
i_read_only = wd_this->ENABLE_PRI_SELECTOPTION ).   <-----pls see here how i am controlling the read only property
I assume you know this much...already....but i am just putting everything down....
step2:
in my view where i want to display the select-options....i added this code under my wddoinit method
DATA lo_componentcontroller TYPE REF TO ig_componentcontroller .
lo_componentcontroller =   wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->ENABLE_PRI_SELECTOPTION = abap_false.    <--pls see initially we want this field to be open
lo_componentcontroller->create_select_option(
step3:
i did not have much logic to control the select option field so i added a button which if user presses the field become disable...
under that button action method i added the following code:
DATA lo_componentcontroller TYPE REF TO ig_componentcontroller .
lo_componentcontroller =   wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->ENABLE_PRI_SELECTOPTION = abap_true.
   "<---pls see here how i am changing the global *attribute which Thomas has suggested for controlling the "read only" attibute for the select-option field....you can put this under *your "if" statement....
"this step is very important if you do not remove the field you will get the dump...since it will try to add the same field again
"which produces dump from system....
lo_componentcontroller->m_handler->REMOVE_SELECTION_SCREEN_ITEM(
i_id = 'PERSNO' ).
"now call the same method which we created at component level to create the select_options...
lo_componentcontroller->create_select_option(
that is all....it works great for me.....let us know if still have any questions....
Thanks...
AS...

F4 help FOR A SELECT OPTION FIELD

Hi,
Can anyone tell how to provide F4help for a select-option field?
Regards,
Hema

Hello,
If you created a search help in the DDIC...Then check the check box EXPORt parameter for one of the fields
If you used the function module Make sure you pass the correct values..Also the field name in CAPITAL letters..
Check this code..
TABLES: T005T.
DATA: BEGIN OF t_t005 OCCURS 0,
        land1 TYPE t005-land1,
      END OF t_t005.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(6) v_text FOR FIELD P_LAND1.
PARAMETERS: p_land1 TYPE t005-land1.
SELECTION-SCREEN COMMENT 13(35) v_text1.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
v_text = 'Country'.
v_text1 = ' '.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_land1.
REFRESH: t_t005.
SELECT land1
         INTO TABLE t_t005
         FROM t005.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
*            DDIC_STRUCTURE   = 'T005'
            PVALKEY          = ' '
            retfield         = 'LAND1'
            dynpprog         = sy-repid
            DYNPNR           = sy-dynnr
            dynprofield      = 'P_LAND1'
            callback_program = sy-repid
            value_org        = 'S'
       TABLES
            value_tab        = t_t005
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS           = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Deepu.K

PLANNING HIERARCHY OPTIONAL FIELD

Similar Messages

Maybe you are looking for