Planning Layout: Environment-Specific Attributes

Hello,
In the following link, I find information about attributes in a planning layout:
http://help.sap.com/saphelp_sem60/helpdata/en/38/021c0d3a5c473392a7147b941541b6/frameset.htm
Does somebody know where I could change these attributes?
Thanks for your help.

Hi Anne,
In your case, pl do the following.
In the layout builder go to the last screen, on the right side top, you will see 4 icons. Click the one after "I" icon. Thats for reading documents. Check that box.
But before that, atleast one of the characteristics used in the layout should be made as "document attribute". So go to any of the objects for which you wish to maintain documents. RSA1 - info objects tree, select your info object , sap profit center and go to change mode. In the General tab, you will see a check box " characteristic is document attribute" check that box and activate the info object.
Get out of BPS0 and come back to BPS and go to the layout, you can check that box.
Once done, start enetring values.
WHile entering values in the layout, the tool bar above the data entry area, you will see a few icons, one after "append linns" is to create document.
Let me know if this works for you. I can send you some documents on this, if you wish.
Thanks
Ravi Thothadri
[email protected]

Similar Messages

Changing attribute order in a planning layout

Hi all,
I have a planning layout with one characteristic in lead column and 4 others attributes to be displayed with. The attributes appear with the following order:
-standard infoobject (sort by technical name).
-all other custom infoobjects /(sort by technical name too).
Is it possible to change this order?
Thanks for help
Vincent

No
I dont think that is possible.
Chirag S

Planning Layout: 7KEA (PCA): What is attribute?

Hi,
Could anyone advise what is the attrribute during the creation of PCA planning layout?
Attribute can be either: Unit, Text Exits, Distribution Key, Action
When I click to insert an element (Shift+F4), I can have options to choose as follows:
Key figures with characteristic
Formula
Attribute
Kindly briefly advise on their features, especially the attribute.
Thanks.

Hi Rajiv,
Thanks for your reply. I can't understand you explanation.
I cannot understand from this website although it has some explanation in length.
http://allian.uclv.net/saphelp/helpdata/EN/e9/f02c7dd435d1118b3f0060b03ca329/frameset.htm
The question is, I tested:
One layout with coloumn distribution key and one without distribution key; but the result of the report is same ...
What are the distribution key or other attrubute values actually for? Any solid examples?
Under teh DK columns, there are some selectable values, like the following:
0     Manual distribution
1     Equal distribution
2     Distribution as before
3     Distribution by percentage
4     Distribute values to following no-value periods
5     Copy values to following no-value periods
7     Distribute according to number of days in period

Add a field currency in a specific planning layout

Hello all,
I create a new planning layout for activity with transaction KP75 actually I use 2 fields , activity and plan fixed price and I would like to add a filed to display the currency of the company code.
Is it possible and how to do that?
Thanks in advance.
Regards
Jean-Marc

Hi,
If you want to add more field in the layout,then go in change mode.Then select the layout & go to edit menu & select the new lead colum here it will add new colum now put the description & save.
Regards,
Raj

Planning layout is not working in CRM

Hi Guru's,
I have created one planning profile under one planning layout in BW. Then I had configured this pallning profile in CRM-TPM. When I m going to creat Trade Pramotion. The planning layout is not work.
After puting a Planning Profile Grp. "Volume/Trade Spend" new tab will be appeared Its shows following error
Error in planning Services
Error Message count : 0001
Attribute 0BPARTNER has not value
It means 0BPARTNER infoobject have novalues. then I had entered Customer Master data in CRM with the help of CRM consultant, Then I have pulled the same data in BW. But still I am facing this Error.
If you know about this error. Please guide me. I]ll reared to maximum points.
Regards
Manoj Kulkarni

Hi Ravi,
Hope you would have handled this issue.
My problem is what ever the planning profile I had created in SEM BPS (BW System component version BW 7.,4) using BPS0 t-code, I am unable to retrieve the same in CRM system while trying to assign the same to the planning group.
At CRM end, In the below navigation i.e SPRO->CRM->Define Transaction types-> created & then while assigning the Planning profile in SEM Planning tab, I am unable to retrieve the ones I had created in BW-BPC (BW 7.4).
Could you pls let me know what I would be missing here.
We are in very beginning stage i.e testing the connections & communications, yet to start the configuration of TPM in CRM.
Thanks.

Display multiple combination of values all at a time in the planning layout

Hi,
we are on BW 3.0B and SEM 3.1B. We've 2 characteristics "COUNTRY" and "CONTINENT" in planning level and package.
in the planning layout, we had placed "CONTINENT" in the lead columns and "COUNTRY" in the header are and COUNTRY is hidden.
Now, when we execute the layout for CONTINENT values "EUROPE and AFRICA" and COUNTRY values "GERMANY and SAFRICA".
output of the layout is as follows for country GERMANY
CONTINENT Value
EUROPE 123
EUROPE 234
EUROPE 456
as COUNTRY is in header, we need to scroll down (use down and upper arrows) to get values for next country SAFRICA combination of CONTINENT "AFRICA" in the layout as follows
CONTINENT value
AFRICA 342
AFRICA 267
AFRICA 768
How do we get the layout to display both AFRICA and EUROPE in the same page without a need to use arrows as follows
CONTINENT Value
EUROPE 123
EUROPE 234
EUROPE 456
AFRICA 342
AFRICA 267
AFRICA 768
the only solution, i can think of is move COUNTRY from header to lead columns. But, we have a need to keep COUNTRY in the header area. I doubt if we can achieve this, but i have some hope as COUNTRY is a hidden field in the header area which we can take advantage of.
any help is greatly appreciated.
thanks

Hi Marc,
yes. there u go. my name is hari.
thanks for your reply. sorry to confuse you. earlier, I just took a random example. Now, I am giving my problem in a more realistic way.
we have cube data as follows
Code Area Group Price
ABCD EUR 111 20USD
ABCD USA 222 30USD
Code, Area, Group are not attributes of each other.
we have a planning folder with variables for "Code" and "Area" with an input layout that has "Code and Group" in the header and "Area" in the lead columns.
after we execute folder, if we enter values "ABCD" for variable "Code" and variable range "EUR to USA" for "Area", current layout is as follows
======
Header
======
Code : ABCD
Group: 111 (not visible as Group is hidden in the header area of layout)
======
Layout
======
Area Price
EUR 20USD
for next combination, if we use down arrow to scroll down to Group 222, layout is as follows
======
Header
======
Code : ABCD
Group: 222 (not visible as Group is hidden in the header area of layout)
======
Layout
======
Area Price
USA 30USD
we are interested to see all "areas" for Code ABCD irrespective of "Group" as follows.
if we enter "ABCD" for Code and "EUR to USA" for "Area" variables, we need to have layout
======
Header
======
Code : ABCD
======
Layout
======
Area Price
EUR 20USD
USA 30USD
this might also work out for us.
======
Header
======
Code : ABCD
======
Layout
======
Area Price Group
EUR 20USD 111
USA 30USD 222
How do i achive this? we have a need to keep Group in the header area of the layout to get data from other source.
hope it is clear.
Message was edited by: hari143

Planning layout can no longer be displayed after transport

Hello everybody,
I have transported a planning area with all levels and so on.
I have several Manual Planning Layouts with key figures in data columns and rows defined individually.
I am using defined values of G/L Account characteristics in Lead column, each row is defined by a G/L Account number of a specific Chart of accounts predefined in the Header.
I load my G/L Account numbers with the same flat file in Development system and in Production system but after transport the layout cannot be displayed.
If I maintained G/L account characteristic in RSA1 on production system, I find all the account numbers for my Chart of accounts but if I try to define a value of G/L Account in my planning package, I do not find any values on my Chart of Account???
Could you help me??
Regards,
RaMa

Switch cube Load <> Planning solves the problem...
Thanks !
RaMa

Error message when I calling planning layout in the STS

Dear
I'm trying to use Status and Tracking System with BPS ( SEM 4.0 SP10, BW 3.5 SP14 ).
But I got some error messages when I calling planning layout in the STS screen..
I designed 2 lower unit(A,B) and 1 upper unit(C) for the test. and using Bottom-up work-flow.
I did
1. Create Planning Area in the BPS0 ( also Level, Package, Layout ..)
2. Created Web Interface in the Web Interface Builder using the upper BPS Layout .
3. Customizing STS
    - Create Sub Plan & Session
    - Asssign Hierarchy to Sub Plan
    - Determine attribute for created planning session ( Bottom-up, Auto mail )
    - Define Header characteristics for planning session to contains the planning package completely.
    - Determine Date, Person Responsible and Layout.
4. Send Start mail
5. Open STS Web Start Screen ( using B Unit responsible user .)
When he click "Open Planning" icon in the screen the following error messages were happened...
I've no idea for that because I didn't use any variables or offset settings.
I guess that comes from header settings for the planning session because when I deleted the header settings for the planning sessions, I could see the planning layout.
but I could not use lock processing in the STS.
Could you tell me what's happening to me?
[ Following error message ]
Correct the data on variables and offset in character string "?
Message Number UPC_FW092
Long Text Diagnosis
Character string "", which contains data on the variables and offset, has an invalid format, and cannot be converted.
Procedure
Correct the character string, so that it has the correct format. A correct entry on variable and offset has the following form:
<VARIABLE_NAME> [{ + | - } OFFSET]
Examples:
VAR0
VAR1+1
VAR2 - 2.
Also check whether the variable, that you want to use is available in the planning area.

Hello,
this seems to be a bug. The error message should include a variable name between ''. Since there is none, the function that raises the error was not called correctly.
It's not likely that this is related to STS since STS does not use variables at all. It's probably a problem with the layout. If you can't resolve it, please open a message to SAP Support.
Regards
Marc
SAP NetWeaver RIG

Specific attributes for IDM implementation

I am trying to integrate webcenter with Oracle IDM environment, to do the same i required to know the specific attributes for oracle webcenter users
the input is required for the IDM team to create the schemas,
Can anybody enlighten me about the same,

Read this link and around: http://docs.oracle.com/cd/E21764_01/webcenter.1111/e12405/wcadm_security_id_store.htm#CFHJEJID
Note, that you will not integrate "WebCenter", but rather "its LDAP".

New Empty Rows in Planning Layout

Hi All
I am having a bit of a rough time with 2004S and planning layouts. In order to test that I am not doing something stupid (which is fairly likely) I have created a simplified model (IC, Aggr Level etc etc) with which to prototype.
I have an InfoCube with the following structure:
Char: Company     ZCH_KCO
      Job         ZCH_JOB
      Plan Item   0SEM_POSIT
      Value Type 0VTYPE
      Version     0VERSION
KeyF: Amount      0AMOUNT
Time: Fisc Per    0FISCPER
      Fisc Var    0FISCVARNT
Unit: Curr Key    0CURRENCY
I have defined my Aggregation Level in the Planning Modeler to include all the InfoObjects in the InfoCube. I have not defined a Filter on this Aggregation Level.
I then created a Query to include all the characteristics in the Rows and the Key Figure in the Column.
Last, but not leats, I popped it into a Web Template where I assigned the Query to an Analysis Web Item and I set the "Number of New Lines" attribute to 10.
When I execute it, I get the following [rather comprehensively documented] error message appearing at the top of the report:
"No new row or column added because not all characteristics have a key cell"
Anyone got any ideas?
Cheers - D

Hi Daneel,
I have not experienced the error you mention but have managed to get input-ready planning queries to work, so I will offer a couple of suggestions:
1. Make sure that your key figure is marked as being input ready ("can be changed" on the Planning property tab)
2. Values need to be uniquely defined to be input ready. Try putting restrictions on your characteristics to refine the data. Eg. put value type, version etc.. in the filter area and restrict them - put only the Plan item in the rows.
3. Make sure you do not have zero suppression enabled on rows and column structures.
Also, refer to this help section which may be useful:
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/43/f234619e3c4c5de10000000a155369/frameset.htm">Manual Planning in NW2004s</a>
Good luck!

Planning Layout - BCS

Dear All,
I wish to create a new planning layout in BCS. the layout is as below, for a series of Commitment Item i also want subtotal. The summary table used is FMBDT. Could you please share some information/knowledge/document which will help me to meet the requirement.
Funds Center I Commitment Item I Commitment Item Description I Amount I Distribution Key
Best regards
Abishay Solomon

Hi,
What you mean series commitment item for subtotal? for planning or reporting.
To create new planning layout, just copy the standard planning layout and add the new column, select the attribute for distribution key.
Regards,
Dewi

Planning layout - not executeable anymore

Hello,
I have changed a planning layout. In detail: I changed the heading of two columns. Not more. Then I transported the layouts. When I execute WebInterface I receive following error message:
"The environment has changed. Layout is not executeable any more."
I have no clue why. More than the headings are not changed.
As second question: in my productive System in the layout in Data Columns -> Comparison Column are activated. When I import my transport - how can I make sure that the comparion columns are also activated (which are fixed by funtion module).
Any input is welcome.

Hi,
Stand corrected.
Have you looked at the below thread
Re: Trade promotional planning CRM and BPS

Can I grant permission to write in specific attributes using security groups

Hi
I Created GPO that write the computer name in the one of the user attribute "comment attribute " when he logged on
then i went to OU and grant self delegate permissions to allow the users of that OU to write on "comment attribute
but this did not work for the users how have been disabled form inheritance
so instead of grant delegate permissions to the OU
Can I grant permission to write in specific attribute "comment attribute " using security groups "Domain User "??

Hi,
Open Active Directory Users and Computers.
On the View menu, select Advanced Features.
Right-click the object for which you want to assign, change, or remove permissions, and then click Properties.
On the Security tab, click Advanced to view all of the permission entries that exist for the object.
To assign new permissions on an object or attribute, click Add.
Type the name of the group, computer, or user that you want to add, and then clickOK.
In the Permission Entry for ObjectName dialog
box, on the Object and Properties tabs,
select or clear the Allow or Deny check
boxes, as appropriate.
http://technet.microsoft.com/en-us/library/cc757520(v=ws.10).aspx
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Transport of planning layouts and planning profiles (CO - Cost Center Acc.)

Dear Experts,
I am new to SAP CO and would like to transport new planning layouts and planning profiles. Therefore I clicked on transport and the following customizing task is added to my transport request:
IMG Activity Create Planning Layouts for Cost Element Planning
-> ke34
->
CEFORMC
CEFORMF
CEFORMS
CEFORMT
CEFORMV
CEFORMW
CEPRINT
CESETS
TKEBS
TKEP1
TKEP2
TKES1
TKES2
TKES4
TKES5
TKESK
The transport worked without error.
Unfortunately none of the layouts arrives in test environment.
Do you have any idea of what I could have forgotten?
Thanks a lot!!
Thomas

After you have released the transport request, the objects of the request are available in the target system and the target clients. If you want to carry out a client copy within the same system, proceed as follows:
       1.      Log onto the system in the desired target client.
       2.      Start the client copy (Tools > Administration > Administration > Client Administration > Special Functions > Copy Transport Request; transaction SCC1) and enter the source client and the number of the transport request.
       3.      Then start importing the objects.

How to implemented Planning Layout for other plan

Hi,
I have one planning layout for X plant now I want to use same layout for anothr plant. Can I copy the same layout for another plant...? If yes pleast let me know the step with tr.code.
In this senario what I have to copy Planning area, Level or layout...?
Your help will be highly appreciated. I will assign full mark.
Regards
Manoj

Hello,
Why don't use restrict your layout by a variable based on the plant? This variable could for instance be put on the planning level.
Then just add this variable in your planning application via UPSPM.
The variable can be an authorization variable, exit variable, user specific variable...
Rgds,

Planning Layout: Environment-Specific Attributes

Similar Messages

Maybe you are looking for