Planning layout is not working in CRM

Hi Guru's,
I have created one planning profile under one planning layout in BW. Then I had configured this pallning profile in CRM-TPM. When I m going to creat Trade Pramotion. The planning layout is not work.
After puting a Planning Profile Grp. "Volume/Trade Spend" new tab will be appeared Its shows following error
Error in planning Services
Error Message count : 0001
Attribute 0BPARTNER has not value
It means 0BPARTNER infoobject have novalues. then I had entered Customer Master data in CRM with the help of CRM consultant, Then I have pulled the same data in BW. But still I am facing this Error.
If you know about this error. Please guide me. I]ll reared to maximum points.
Regards
Manoj Kulkarni

Hi Ravi,
Hope you would have handled this issue.
My problem is what ever the planning profile I had created in SEM BPS (BW System component version BW 7.,4) using BPS0 t-code, I am unable to retrieve the same in CRM system while trying to assign the same to the planning group.
At CRM end, In the below navigation i.e SPRO->CRM->Define Transaction types-> created & then while assigning the Planning profile in SEM Planning tab, I am unable to retrieve the ones I had created in BW-BPC (BW 7.4).
Could you pls let me know what I would be missing here.
We are in very beginning stage i.e testing the connections & communications, yet to start the configuration of TPM in CRM.
Thanks.

Similar Messages

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

Layout adjustment not working with tables

Hi all
Why will layout adjustment not work with tables?
I am trying to re-format from A4 landscape to A4 portrait.
The text box containing the table will resize but not the table.
Any clues why this might be, I don't want to manually resize every table in the document.
Many thanks,
Rob

Thanks Jongware,
Having resized the table and got the little red ovals, I tried various things like changing the font size etc but the best workaround I found was to select the table and change the cell inset value to 0, this got rid of all red ovals and I didn't need to change the font size.
Cheers,
Rob

Middleware - Delta load is not working from CRM to R/3

Hi Experts,
Our client is using SAP-R/3 4.7 and CRM 5.0
Connectivity was established via Middleware and initial load of Customizing objects and Master data( Customer and Material) was finished successfully.
Now if i create any Customer or Product in R/3 they were replicating to CRM(Delta load), but this delta load is not working in CRM to R/3 direction.
In CRM Administration console( Transaction code - SMOEAC) R/3 site was maintained and subscribed for Publications - All Business Partners, All Business Transactions and All Business partner Relationships.
Can anybody help me out that why Delta load is not happening from CRM to R/3 Direction.
Thanks in advance
Nadh.

Hi Nadh,
for BPs check PIDE settings once agiain, i hope u ve already downloaded all mandatory obects for BP, because u already told that replication from r/3 to crm is ok, so check once again PIDE settings (CRM to R/3),
for Products u ve to manual upload only
for Products
This may be necessary because the data is required in the OLTP System for a number of logistical processes such as procurement, inventory management, billing, financial accounting, controlling.
cheers
Ranga

Search criteria drop down not working in CRM 7.0 Web UI for few users.

Hi Gurus,
i have come across problem in sap CRM 7.0 web ui,
it goes here....
when a user opens a webui page and goes to "account management" work center page under "search" work center link group... he selects "accounts"(or contacts or account plan)... there in search criteria fields..(account id,role,country etc ) drop down list is not working for him...he can only see only which is maintained as default but if wants to change it by drop down list selection it is not possible...for me it is working ..can u please suggest what is missing in his case..?
if it is authorization issue please tell which object should i check..?
Thanks,
gaurav

Hi,
Please check if the user is assigned to a Business Partner.If not then assign the User to a Business Partner and check.
Regards.
Deepak Ramchandran.

Layout variant not working

Hi ,
I have executed a report . I hide one column and saved the layout. The layout name comes on to the selection screen parameter which i have defined on the selection screen.
PARAMETERS: p_vari LIKE disvariant-variant. " ALV Variant
i have made the i_save = 'A' and is_default = 'x'. and also used other function modules reg. Variants.
but if i select the layout variant in the selection screen and execute it is not working . the hidden column also coming on the output.
But if the select the layout variant on the output of the report from the icon select layout it is working fine. the column which i have hidden is not coming. it is perfect. why it is not working when i select the variant in the selection screen.
Regards,
Rose.

Hi,
Please try this code
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
w_variant-report = sy-repid.
* Function module to show the variant of a ALV report
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant = w_variant
      i_save     = 'A'
    IMPORTING
      es_variant = w_kvariant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S'      NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    p_vari = w_kvariant-variant.
ENDIF.
END-OF-SELECTION.
MOVE w_variant TO w_kvariant.
    MOVE p_vari TO w_kvariant-variant.
    MOVE sy-repid TO w_kvariant-report.
*   Function module to check the variant existence
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
      EXPORTING
        i_save     = w_save
      CHANGING
        cs_variant = w_kvariant.
    w_variant = w_kvariant.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program          = sy-repid
      i_callback_pf_status_set    = 'SET_PF_STATUS'
      i_callback_user_command     = 'USER_COMMAND'
      i_callback_html_top_of_page = 'HTML_HEADING'
      i_grid_title                = text-t06
      i_grid_settings             = wa_grid_set
      is_layout                   = wa_layout
      it_fieldcat                 = t_fieldcat
      i_save                      = 'X'
      is_variant                  = w_variant
      is_print                    = wa_print
    TABLES
      t_outtab                    = t_header
    EXCEPTIONS
      program_error               = 1
      OTHERS                      = 2.
IF sy-subrc <> 0.
    CASE sy-subrc.
      WHEN 1. RAISE program_error.
      WHEN 2. RAISE others.
    ENDCASE.
ENDIF.
Regards
Krishna
Edited by: Krishna Gowrneni on Apr 17, 2009 5:27 PM

Copied layout is not working for Sales order item assinment block

Hi Experts,
I copied the standard componet BT115IT_SLS/items view layout with custom role configuration key and worked fine.
I have added one more field to the item view with the same configuration and saved .When I opended the sales order in the WEB UI , The item assigment block is displaying with complete BTADMINI context fileds and This is the issue.
I have seen configured fields only in the personalization and I have downloaded the items assigment block data to Execl.In the Execl sheet I can able to see the configured fields (availble fileds in the configuration tab in component workbemch) data only.
But Items assignment block is displaying all the fileds (taking from the context node BTADMINI).
I have deleted existing customer configuration and again copied from the standard layout.But I got the same issue.
I have wriiten some code in the ON_NEW_FOCUS and commented the code.Still it not working.
Please help me , where I have done the mistake and provide me some inputs.
Thanks,
Venkky

Hi Experts,
Solved isuues myself.
The problem is inconsistency of BTAdminI context node . I have deleted the view enhancement and again enhanced the view .I copied the layout with customer role key and dispalyed expected layout.
Thanks,
Venkky

N4S: Web Dynpro for ABAP layout editor not working

Have problem in Layout editor in Web Dynpro for ABAP
I have installed NW04S Testdrive on 64bit Linux and able to login.
SE80 is working alright.
Next I create a Web Dynpro Comp. / Intf. and create a component.
I double click on the View name "V_Default" . The Layout editor opens on the right side. Change into Edit Mode.
The "View Elements" panel on the left side of layout editor is missing. This is where we select the various elements like "Textview" etc.
Even the right click on the "ROOTUIELEMENTCONTAINER" to insert elements using context menu does not work.
In summary I am not able to add any element in WD4A Layout screen.
Is there any special plugin required to be installed?
How to solve this problem?

you cannot develope Webdynpro for ABAP using ECC5
This is available with netweaver 2004s (WAS7.0) for which ramp up is going on right now and the general availability is expected sometime around 1st quarter for 2006.
Regards
Raja

Lightroom 3 Print Moduel Layout Style not working??

Hi all,
With no change in Lightroom, all of a sudden I have issues with the "picture package" and "custom package" settings within the layout styles in the print module.
For instance, if you are in "single image/contact sheet" and you have an image selected and on screen, then when you change to either "picture package" or "custom package" what should happen is that the image is then refected in the new picture package present. This does not happen at all.
I can not even choose a present (which should work), or drag an image onto the page. It seems that "picture package" and "custom package" are simply not working at all.
Does anyone have any suggestions?
computer 1 is an imac using 10.6.8, and computer 2 is a slightly older imac using 10.5.8
PS. it is now happening on both our computers which are on a network??

Good point. I don't have the latest. I'll give it a try and post back to the site.
Thanks

Placing components without layout manager not working

Hey there, I am working on a java game version of pong which I have begun to try and do using Java Swing. The problem I am currently having is reposition the components in the main window part of the game which is were the user can start a new game or close the program. I having tried using the absolute positioning by setting the layout manager to null but then everything goes blank. I can't figure out why this is not working. Here is the code so far...
import javax.swing.*;
import java.awt.*;
public class SwingPractice extends JFrame
    private Container contents;
    private JLabel titleLabel;
    private JButton startGameButton;
    public SwingPractice()
        super("SwingPractice");
        contents = getContentPane();
        contents.setLayout(null);
        this.getContentPane().setBackground(Color.BLUE);
        startGameButton = new JButton("Start Game");
        startGameButton.setFont(new Font("Visitor TT1 BRK", Font.PLAIN, 24));
        startGameButton.setForeground(Color.cyan);
        startGameButton.setBackground(Color.blue);
        startGameButton.setBounds(350,350, 75, 75);
        titleLabel = new JLabel("The Amazing Ping Pong Game!!");
        titleLabel.setForeground(Color.cyan);
        titleLabel.setBackground(Color.blue);
        titleLabel.setOpaque(true);
        titleLabel.setFont(new Font("Visitor TT1 BRK", Font.PLAIN, 24));
        titleLabel.setBounds(0,350, 75, 75);
        contents.add(startGameButton);
        contents.add(titleLabel);
        setSize(700,350);
        setResizable(false);
        setVisible(true);
    /*private class SwingPracticeEvents implements ActionListener
    public static void main(String [] args)
        SwingPractice window = new SwingPractice();
        window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
   Any other critiquing would be greatly appreciated. Thank you.
Edited by: 804210 on Oct 21, 2010 1:30 PM

804210 wrote:
Hey there, I am working on a java game version of pong which I have begun to try and do using Java Swing. The problem I am currently having is reposition the components in the main window part of the game which is were the user can start a new game or close the program. I having tried using the absolute positioning by setting the layout manager to nullDon't. Ever. Never. Well, mostly.
Read the tutorial chapter about [url http://java.sun.com/docs/books/tutorial/uiswing/layout/index.html]Laying out components. It even features a section on absolute positioning - which you should skip reading, of course! :o)
And read this old Sun topic: http://forums.sun.com/thread.jspa?threadID=5411066
Edited by: jduprez on Oct 21, 2010 10:48 PM

Adobe forms layout editor not working

Hello
the layout editor in <b>sfp</b> transaction for adobe forms is not working... it says " could not open layout editor" .
can anyone plz suggest whether anything needs to be installed while installing the gui or any patch would do ...
or atleast where to find the patch ..
thanks in advance !

Hi,
Actually, after a bit more checking I've found SAP note 962763 with more detail.
You do need Adobe LiveCycle Designer and can download the installer from SAP Service
Marketplace:
http://service.sap.com/installations
Entry by Application Group
-> SAP NetWeaver
-> SAP NETWEAVER
-> SAP NETWEAVER 2004S
-> Installation and Upgrade
-> <Choose any OS and DB combination.>
-> Adobe LiveCycle Designer 7.1
Refer the links -
Adobe interactive forms tutorial
adobe forms
Adobe Forms
Regards,
Omkar.

Phone layout redirect not working - built and hosted on Muse

Hi,
I just added a tablet and phone layout to my Muse built desktop layout. The redirect works fine for the tablet but the desktop version comes up on my smartphone (Android Moto X). The webpage is http://www.elegantperfection.com/ I am hosting with Adobe so I just hit Publish - I do not use Publish to FTP. The settings in site properties are set to redirect; not sure if there is another step but it seems to work fine for the tablet. Any ideas as to why the redirect is not working? Thanks!

Hi
I see you have published the site to Business catalyst, in this case, could you please try to Re-publish the complete site again and check if that helps?

Keyboard layout switching not working

i use xfce4 and i created /etc/X11/xorg.conf
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "us, ar"
Option "XkbOptions" "grp:alt_shift_toggle"
EndSection
but it's not working.
xfce4 has a program called Keyboard in settings menu, i used it it gives the ability to add another language but it doesnt has a switching capability.

I don't use keyboard layout switch through xorg.conf because it stops to work sometimes(if i use setxkbmap for example).
So i am using setxkbmap in .xinitrc.
setxkbmap -model pc105 \
-layout "de,ru" \
-variant "basic,phonetic" \
-option -option "grp:sclk_toggle, grp_led:scroll, terminate:ctrl_alt_bksp, caps:none"
and "kbdd" for remembering layout for each window.
Change it to your needs or check the arch wiki about xorg.conf.d .

Layout Mode not working in T-Code SQVI for some GUI

Dear Experts,
It has been found that the Layout mode is not working in T-code SQVI in some of our users Systems . The Layout Mode is working perfectly fine in some system though. If we select Layout mode in some system it is showing screens the same as in Basis Mode.
The GUI version is same in both the machines and both are having the same OS.
GUI Version : 710
OS : XP
Kindly suggest if any settings needs to be done in System or GUI so that all the systems get the same interface of Layout Mode as required.
- Jitesh

Hi experts,
Just wished to post the solution of the Issue raised by me...
I just needed to update my GUI Patch level available at market Place.
Thanks.
Jitesh

CAD not working on CRM 4.0

Hi Guys
We are working on CRM 4.0 webclient. Our SAP CRM is integrated with third party CTI vendor i.e Interactive Intelligence. All the integration is done and we are able to make inbound and outbound calls.
When any inbound call is received, even though the telephone number is maintained on the Business Partner, the identification of business partner is failing and we get a message called 'No Account information found'.
We did the below config on Account Identification Profile in SPRO.
CAD Application ID - CRM_IC (Our CTI vendor confirmed that it doesn't matter whatever is mentioned in this field)
XSLT File - CRM_IC_BPIDENT_EXT_IAD_TO_ABAP.
Are we doing anything wrong? Your help would be highly appreciated.
Thanks
Hari

Hi Guys
Just an update. We are not using CAD anymore. We are using the standard ANI functionality.
But this is also not working. I debugged it. Below are my findings. A standard function module is being called up i.e. TREX_BUPA_SEARCH. To this function module, the parameters Telephone Number(IV_TELEPHONE) and Country (IV_COUNTRY_FOR_TEL) are being passed. There is nothing wrong with the parameter for Telephone Number. But for the parameter Country, a value 'X' is being passed. So the function module is returning no business partners.
Is there anything that I need set on config?
Your help will be highly appreciated.
Thanks
Hari

Planning layout is not working in CRM

Similar Messages

Maybe you are looking for