Planning layout - not executeable anymore

Hello,
I have changed a planning layout. In detail: I changed the heading of two columns. Not more. Then I transported the layouts. When I execute WebInterface I receive following error message:
"The environment has changed. Layout is not executeable any more."
I have no clue why. More than the headings are not changed.
As second question: in my productive System in the layout in Data Columns -> Comparison Column are activated. When I import my transport - how can I make sure that the comparion columns are also activated (which are fixed by funtion module).
Any input is welcome.

Hi,
Stand corrected.
Have you looked at the below thread
Re: Trade promotional planning CRM and BPS

Similar Messages

File/Import and Page Layout not working anymore

I have a question about old software: FrameMaker 6.0 on a Mac. (While Adobe encouraged me to purchase this in 2001 for the chemistry textbook I am writing, I had invested to much to abandon it when Adobe abandoned the Mac version a few years later.)
I have imported dozens of images files into the 750 page book and FrameMaker has accepted both tif and jpg formats. The way I did it was to create an anchored frame in the textbook, click on it, and then File>Import and select the image file and then choose whether I wanted it to be referenced or actually in the text. All of this worked fine... until a couple of days ago.
Problems
1. I no longer get Import as an option under File and
2. FrameMaker no longer recognizes tif and jpg files under "All Readable Documents" when I do File>Open. I have to click on Show All Files to see them.
As a result I am unable to import any tif or jpg files into the FrameMaker textbook.
What's curious is that I have 6.0 installed on both a G4 and a PowerBook and this problem has occurred on both at the same time.
3. And I just discovered that when I do Format/Page Layout the half a dozen or so custom formats that I had are no longer listed.
So what has caused this loss of memory for Framemaker that it can no longer do what it has done for me for years. (I am somewhat sympathetic to it's memory loss myself as a 78 year old user.)
The G4 has been unplugged recently but in the past it has been unplugged for a week or so and there were no problems.
Fred Tabbutt

adiabatic wrote:
I have a question about old software: FrameMaker 6.0 on a Mac. (While Adobe encouraged me to purchase this in 2001 for the chemistry textbook I am writing, I had invested to much to abandon it when Adobe abandoned the Mac version a few years later.)
I have imported dozens of images files into the 750 page book and FrameMaker has accepted both tif and jpg formats. The way I did it was to create an anchored frame in the textbook, click on it, and then File>Import and select the image file and then choose whether I wanted it to be referenced or actually in the text. All of this worked fine... until a couple of days ago.
Problems
1. I no longer get Import as an option under File and
2. FrameMaker no longer recognizes tif and jpg files under "All Readable Documents" when I do File>Open. I have to click on Show All Files to see them.
As a result I am unable to import any tif or jpg files into the FrameMaker textbook.
What's curious is that I have 6.0 installed on both a G4 and a PowerBook and this problem has occurred on both at the same time.
3. And I just discovered that when I do Format/Page Layout the half a dozen or so custom formats that I had are no longer listed.
So what has caused this loss of memory for Framemaker that it can no longer do what it has done for me for years. (I am somewhat sympathetic to it's memory loss myself as a 78 year old user.)
The G4 has been unplugged recently but in the past it has been unplugged for a week or so and there were no problems.
Fred Tabbutt
I don't know if read-only files are recognized by FrameMaker to the point where it will dim commands that need to write to the files.
It's always a good idea on Mac to repair permissions with Disk Utility - make sure you have good backups, just in case.
Have you tried saving a file that can't import as MIF, then opening the MIF version to restore the file, and perhaps lose any corruption in it? This is called the "MIF Wash."
I think the latest Mac OS that FrameMaker can work with is system 9, or the Classic simulator that runs on the OS X release called Tiger. I'm sure you'd know if you changed operating systems in this period. Classic won't run on Intel Macs.
I have no other clues about what might cause this, except the general thought that something has changed on your systems or in the files you're working with. Does the problem persist in a brand-new file you create on your local drive? If you're working with FM files on a network, have you tried the process with files on your local computer drive? Have you quit FrameMaker and restarted your Macs? Any change? If you have a cloned bootable backup of your stuff from before the problem arose, you might want to try cloning your problematic drive to a new bootable backup, then restoring the known good clone, to see if it works.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Not able to view layout in Enhance planning layout UPX_MNTN

I have created a new layout in BPS0 . In the planning level, i have included User exit variable.
I selected the planning area in UPX_MNTN. However in Enhance planning layout, i could not see the layout, i had created in BPS0.
Do i need to do any other settings to view in UPX_MNTN ?

HI Ravindra,
          I was in the same boat. I had assigned an exit variable in one of the layout. It was not able to execute the layout till runtime, and that is the reason it doesn't come to Planning services.
        In short, planning services will show when all your variable values are getting populated before layput execution.
        I have another issue, where I want to populate brand based on selected products from CRM. I am unable to accomplish this. Please let me know, if you get any response.
Thanks and Regards,
Harpal

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

Planning layout is not working in CRM

Hi Guru's,
I have created one planning profile under one planning layout in BW. Then I had configured this pallning profile in CRM-TPM. When I m going to creat Trade Pramotion. The planning layout is not work.
After puting a Planning Profile Grp. "Volume/Trade Spend" new tab will be appeared Its shows following error
Error in planning Services
Error Message count : 0001
Attribute 0BPARTNER has not value
It means 0BPARTNER infoobject have novalues. then I had entered Customer Master data in CRM with the help of CRM consultant, Then I have pulled the same data in BW. But still I am facing this Error.
If you know about this error. Please guide me. I]ll reared to maximum points.
Regards
Manoj Kulkarni

Hi Ravi,
Hope you would have handled this issue.
My problem is what ever the planning profile I had created in SEM BPS (BW System component version BW 7.,4) using BPS0 t-code, I am unable to retrieve the same in CRM system while trying to assign the same to the planning group.
At CRM end, In the below navigation i.e SPRO->CRM->Define Transaction types-> created & then while assigning the Planning profile in SEM Planning tab, I am unable to retrieve the ones I had created in BW-BPC (BW 7.4).
Could you pls let me know what I would be missing here.
We are in very beginning stage i.e testing the connections & communications, yet to start the configuration of TPM in CRM.
Thanks.

Transport for delete planning layout

is it possible to create a transport request for deletion. i would have to delete a planning layout i created using FAGLPLC(new g/l planning). i do not use this anymore and would like to delete it from the system and propagate the same to other environment(testing) . could you please let me know if it is possible to do so.

thanq,
ur correct that, looks like, ONLY standard lay outrs r transportable. bcoz, when I used my_alv_layout, I did NOT see the SETTINGS option in MENU, instead there is ?????????????????????????????
1) So, Is there any alternative for my requirement?
OR
2) pls. see my other thread, with title, Can I TRansport a table entry of LTDX, which DELIVERY CLASS is E, ALLOWED?
Its about the TRANSPORTING the same new entry content from TABLE of LTDX , as its "E" type?
and
3) pls. let me know, Wht is the flag to show the alv field as CURRENCY?
thanq
Edited by: Srinivas on Mar 18, 2008 2:50 AM

Key figure flag in the planning layout

Hi,
Can anyone explain the importance of the key figure flag in the planning layout?
Regds
Pavan.

Hi Arun and Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P

Display multiple combination of values all at a time in the planning layout

Hi,
we are on BW 3.0B and SEM 3.1B. We've 2 characteristics "COUNTRY" and "CONTINENT" in planning level and package.
in the planning layout, we had placed "CONTINENT" in the lead columns and "COUNTRY" in the header are and COUNTRY is hidden.
Now, when we execute the layout for CONTINENT values "EUROPE and AFRICA" and COUNTRY values "GERMANY and SAFRICA".
output of the layout is as follows for country GERMANY
CONTINENT Value
EUROPE 123
EUROPE 234
EUROPE 456
as COUNTRY is in header, we need to scroll down (use down and upper arrows) to get values for next country SAFRICA combination of CONTINENT "AFRICA" in the layout as follows
CONTINENT value
AFRICA 342
AFRICA 267
AFRICA 768
How do we get the layout to display both AFRICA and EUROPE in the same page without a need to use arrows as follows
CONTINENT Value
EUROPE 123
EUROPE 234
EUROPE 456
AFRICA 342
AFRICA 267
AFRICA 768
the only solution, i can think of is move COUNTRY from header to lead columns. But, we have a need to keep COUNTRY in the header area. I doubt if we can achieve this, but i have some hope as COUNTRY is a hidden field in the header area which we can take advantage of.
any help is greatly appreciated.
thanks

Hi Marc,
yes. there u go. my name is hari.
thanks for your reply. sorry to confuse you. earlier, I just took a random example. Now, I am giving my problem in a more realistic way.
we have cube data as follows
Code Area Group Price
ABCD EUR 111 20USD
ABCD USA 222 30USD
Code, Area, Group are not attributes of each other.
we have a planning folder with variables for "Code" and "Area" with an input layout that has "Code and Group" in the header and "Area" in the lead columns.
after we execute folder, if we enter values "ABCD" for variable "Code" and variable range "EUR to USA" for "Area", current layout is as follows
======
Header
======
Code : ABCD
Group: 111 (not visible as Group is hidden in the header area of layout)
======
Layout
======
Area Price
EUR 20USD
for next combination, if we use down arrow to scroll down to Group 222, layout is as follows
======
Header
======
Code : ABCD
Group: 222 (not visible as Group is hidden in the header area of layout)
======
Layout
======
Area Price
USA 30USD
we are interested to see all "areas" for Code ABCD irrespective of "Group" as follows.
if we enter "ABCD" for Code and "EUR to USA" for "Area" variables, we need to have layout
======
Header
======
Code : ABCD
======
Layout
======
Area Price
EUR 20USD
USA 30USD
this might also work out for us.
======
Header
======
Code : ABCD
======
Layout
======
Area Price Group
EUR 20USD 111
USA 30USD 222
How do i achive this? we have a need to keep Group in the header area of the layout to get data from other source.
hope it is clear.
Message was edited by: hari143

Problem adding a new field to existing BPS planning layout

Hi
I am new to BPS and planning
I have a requirement to add a new field which has values maintained as 0 and 1 to an existing planning cube.The user wants this new field in the existing planning layout where in he can enter the values for this field as 0 or 1.I have created a new field and maintained values for this field as 0 and 1.I have added this field to the existing planning area and have created variable with fixed value with range 0 to1.I have added the same in selections in existing planning level and package as well along with other existing selection conditions.
In additional functions of adhoc package they have made setting as set to all possible char combination.
In this planning area all the selections are locked in planning level and package.
Now when i execute the planning layout to enter data,my new field is grayed out,it does not allow me to enter the values.need help with this as to how can i make this field input enabled.This is an independent characteristic.
Thanks
Panchan

Hi,
Yu need to delete the data to fill the new field again.
Assign points if it helps
Regards,
Srinivas

Planning layout can no longer be displayed after transport

Hello everybody,
I have transported a planning area with all levels and so on.
I have several Manual Planning Layouts with key figures in data columns and rows defined individually.
I am using defined values of G/L Account characteristics in Lead column, each row is defined by a G/L Account number of a specific Chart of accounts predefined in the Header.
I load my G/L Account numbers with the same flat file in Development system and in Production system but after transport the layout cannot be displayed.
If I maintained G/L account characteristic in RSA1 on production system, I find all the account numbers for my Chart of accounts but if I try to define a value of G/L Account in my planning package, I do not find any values on my Chart of Account???
Could you help me??
Regards,
RaMa

Switch cube Load <> Planning solves the problem...
Thanks !
RaMa

Add Variable in an existing planning layout

Dear guys,
I have a problem with planning in KEPM.
in the planningslayout there was defined one variable for record type.
We want to plan the figures for three record types. In the planning level I added those three record types but I am not able to add more record types in the planning layout.
Can you let me know how can I add more variable for this chracteristic in the planning layout.?
kind regards
udo

It would also help me to know if it is possible to give an interval for the record type. If we try this, we only get the planfigures of the first record type in the interval.

PCA planning layout

Hi,
we have to crate a profit center planning layout with users go from top most hierarchy level to the PC level. How can we get all the hierarchy by every level to be available to reach up to profit center level. How can we define the profit center hierachy level.
I am trying to create the same layout in PCA as the report painter but all the characteristics that are in the report painter are not available at planning layout. Is there any option to get all the characterstics into PCA.
Thanks,
Nivi

Hi Rajiv,
Thanks for your reply. I can't understand you explanation.
I cannot understand from this website although it has some explanation in length.
http://allian.uclv.net/saphelp/helpdata/EN/e9/f02c7dd435d1118b3f0060b03ca329/frameset.htm
The question is, I tested:
One layout with coloumn distribution key and one without distribution key; but the result of the report is same ...
What are the distribution key or other attrubute values actually for? Any solid examples?
Under teh DK columns, there are some selectable values, like the following:
0     Manual distribution
1     Equal distribution
2     Distribution as before
3     Distribution by percentage
4     Distribute values to following no-value periods
5     Copy values to following no-value periods
7     Distribute according to number of days in period

Error message when I calling planning layout in the STS

Dear
I'm trying to use Status and Tracking System with BPS ( SEM 4.0 SP10, BW 3.5 SP14 ).
But I got some error messages when I calling planning layout in the STS screen..
I designed 2 lower unit(A,B) and 1 upper unit(C) for the test. and using Bottom-up work-flow.
I did
1. Create Planning Area in the BPS0 ( also Level, Package, Layout ..)
2. Created Web Interface in the Web Interface Builder using the upper BPS Layout .
3. Customizing STS
    - Create Sub Plan & Session
    - Asssign Hierarchy to Sub Plan
    - Determine attribute for created planning session ( Bottom-up, Auto mail )
    - Define Header characteristics for planning session to contains the planning package completely.
    - Determine Date, Person Responsible and Layout.
4. Send Start mail
5. Open STS Web Start Screen ( using B Unit responsible user .)
When he click "Open Planning" icon in the screen the following error messages were happened...
I've no idea for that because I didn't use any variables or offset settings.
I guess that comes from header settings for the planning session because when I deleted the header settings for the planning sessions, I could see the planning layout.
but I could not use lock processing in the STS.
Could you tell me what's happening to me?
[ Following error message ]
Correct the data on variables and offset in character string "?
Message Number UPC_FW092
Long Text Diagnosis
Character string "", which contains data on the variables and offset, has an invalid format, and cannot be converted.
Procedure
Correct the character string, so that it has the correct format. A correct entry on variable and offset has the following form:
<VARIABLE_NAME> [{ + | - } OFFSET]
Examples:
VAR0
VAR1+1
VAR2 - 2.
Also check whether the variable, that you want to use is available in the planning area.

Hello,
this seems to be a bug. The error message should include a variable name between ''. Since there is none, the function that raises the error was not called correctly.
It's not likely that this is related to STS since STS does not use variables at all. It's probably a problem with the layout. If you can't resolve it, please open a message to SAP Support.
Regards
Marc
SAP NetWeaver RIG

My hdmi adapter not working anymore, no physical damage. Solution?

My hdmi adapter not working anymore, no physical damage. Solution?
Strange is, that i used it several times, it worked fine. Then wothout any reason (like software updete, etc) it just stopped workung, no sync.
I have not changed any parameters of my TV or Beamer.
Hardware:
Ipad 2, Apple Ipad HDMI Adapter, Samsung P2770FH, Optoma HD 65.
Thanks for any help.

I've only used mine a couple of times without any problem, but due to the thinness of the iPad, care has to be taken in inserting the adapter. Slightly wrong angle and it won't go it.
I had a laptop a few years ago where the USB connector failed. I had it replaced under the warantee, The service man told me it was not an uncommom failure on a laptop due to people "torquing" the USB socket while inserting/removing USB items. I have much the same feeling when inserting either the charger cord or my HDMI adapter.
From your description, unless the HDMI adapter failed internally, it sounds like the socket is causing the problem. A few days ago we watch our first movie from the iPad via my ATV2 and "Air Play". Worked great so I don't plan on using the HDMI adapter much at all in the future. Yes, it is a $99 solution, but it works for me. Of course, I already had the ATV2. I doubt if I would buy one just for this abiliity. If nothing else, it seems like a trip to the Apple Genius bar is in order for maybe a replacement unit.
However, with iOS 5 coming out with supposedly total mirroring, it might be worth thinking about getting an ATV2.

User-Defined Planning Layouts - Translations

Hi Experts,
Custom Planning layouts have been created.
I need to translate the form from English to Danish.
This has to be done in the Development system then moved to Quality and Production.
This is how I proceeded with the task:
IMG Path: Project System  Costs  Planned Costs  Manual Cost Planning in WBS  Detailed Planning  Create User-Defined Planning Layouts for Detailed Planning.
Select Change PS Planning Cost Element/Activity Input Layouts.
Select Layout ZMY_LAYOUT  Planning Layout  Translate Form.
Specify Source Lanaguage : EN, Target Language: DA --> Clcik on Translate Button.
There is a prompt for including the request in a Transport Request. If clicked yes it asks for a workbench Request.
I specified the workbench request number.
Select Form --> Object List
Select the line with form name, Source Text --> Click on Translate.
Enter the translation -> Save and exit
However, when I check my request in SE10, it has no objects???
If I repeat the process, and select Transport form, it asks me for a customizing Request.
How can I move my transations from D to Q.
Regards,
Reema Shahbazkar.

Hi,
No it is NOT a unicode system.
Regards,
Reema

Planning layout - not executeable anymore

Similar Messages

Maybe you are looking for