Planning Plant & Production Plant configuration for MRP

Hello PP Guru's ,
What is the configuration required for Planning ( Trading ) Plant & Production Plant for MRP . In the Planning plant only MMR
is available and no other master data . My production is MTS and planning without final assembly .
Regards,
Jaya

Hi DSK,
If 1, 2 , 3 ..... 20 plants are my Planning plant including depos XX   is my production plant how needs to fill the following
Under what Plant i need to give all these details in OPPQ for special procurement
1 .Production plant " "   / Planning plant
    SPk 40
   Procurement type F
Under Special procurement TAB
Special procurement " U "
Plant   " is this Production plant "
As Bom component tab : should i tick direct production ( production plant )
issuing Plant " is this production plnt "
Jaya
Edited by: jaya vimal on Jun 12, 2010 7:58 AM

Similar Messages

Planning File Entry Not Created For MRP Run

We are running MRP in backgroung at MRP area level as per scheduled. One material is missing from MRP run. We are expecting that we should get the proposals because stock is zero ( below reorder level) on the date of sheduled MRP run. Earlier it is working.The material MRP relevant data is given below.
MRP Type - VB
Reorder Level - 6
Lot Size - Fx
Fixed Lot Size - 10
Minimun Safety Level - 10
Please help us to resolve this issue.
Thanks in advance. For any clarofiaction, pls revert back.
Regards,
Chetan K

Hi,
Please check whether you have maintained the Availability check group 01 or 02 in MRP-3 View.
Also check the Dependent requirement selection in MRP-4 view individual collective and Selection method in MRP-4 view for its assy material.
Check the Plant specific material status whether it is blocked for any procurement or usage in Basic Data and Purchasing,MRP views.
thanks and regards
muru

Configuration for MRP Eliment Data

Dear Experts,
For a particular material in Stock and Requirement Screen( MD04) its showing as :
Date                            MRP element                        MRP Element Data
11.12.2008                    SLocSt                                 1006 SLoc: not plnd
What is the configuration please explain?
Thnx
Prosenjit.

Hi Expert,
In my PP-PI senerio, for a particelar material (HALB) in stock & requirements screen showing as :
Date                 MRP element                       MRP element data
11.12.2008        SLocSt                                1006 SLocSt not plnd11.12.2008
SLocSt not plnd Can anybody tell me please what is the configuration ?

Difference Between planning plant & production plant ?

Hi PP members:
I would like to know difference between planning plant & production plant ? Why do we maintain planning plant
Thanks for your time & efforts
Thanks Again,
Suren R

Hi,
Suppose there are two plants A & B in an organisational structure.
Suppose you need a material in plant A but you cannot produce it in plant A because of unavailability of resources. And these resources are available in plant B.
So you can produce the material in plant B and the requirement is thru plant A (e.g thru MRP). Here plant A becomes planning plant & plant B becomes production plant.
To carry out the actual planning and production, follow the following steps-
1) In SPRO, in the special proc key parameter's setting for plant A, mention plant B as the alternative plant.
2) Prepare the material master of the required material in plant A, in MRP 2 view maintain spl proc key as 40 (proc from alt plant) or 80 (production in alternative plant)
3)Maintain the material master in the alternative plant too. In MRP 2 maintain proc type = E. Maintain routing.
4) Carry out MRP run in plant A. If there is any demand, a STPR (spl proc key 40) or planned order (spl proc key 80) will be created in plant A. The stock requirement list will show plant B as the production plant.
5) In case of 40, a planned order will be created in plant B. In case of 80, with proper settings, the planned order in plant A after converting becomes a production order in B.
6)Carry out the production. In case of 40 the material can be sent to plant A from B thru STPO. In 80 the stock in plant A is directly updated when you hit a GR against production order in plant B
7) KINDLY CLOSE THE THREAD.
Regards,
Mahesh Patil

Want to fetch number of equipment within a planning plant.

hi all,
My requirement is to fetch total number of equipments made within a particular planning plant..
for equipment we have EQUI table but in this plant there is no plaaning palnt .
and i have to fetch according to planning plant. total number of equipments.
please do suggest ..some possibble solution.
thanks
nidhi

hi
you can check by using IE05 itself specify the planning plant and execute .
you will get the output
regards
thyagarajan

PPR configuration for MSA

Hello Guys:
Do you have any guide which specifies the correct Partner Product Ranges configuration for MSA application, I have been looking into some guides but I have not been able to get a guide or document which explain in detail how this configuration works. I have not been able to download accounts to my HH and I think the PPR configuration must be set correctly to be able to download this configuration.
Hope you can help me out!!
Hugo

Hi,
yes there is a senario configuration guide which clearly explains how to do PPR sttings for BP and products, it has been modified for MSAHH5.0 but is also applicable to MSAHH4.0. please follow the following link.
Http://service.sap.com/instguides -> SAP Components -> SAP Solutions for Mobile Business -> Mobile Sales for Handheld (with CRM) ->MSA HH 5.0 (with CRM 4.0, SP 09)
It will definetely help
Warm regards
Anubhav Bhatia

Change planning plant in production order

Hi Gurus,
my business scenario is the following:
I have 2 plants that are assigned to 2 different company codes. Plant A (ordering plant) and Plant B (supplying plant).
The users place a sales order on plant A and through MRP with special procurement key 80 the planned order is turned into a production order in plant B.
But in the order confirmation the system tries to post the GR in plant A. Is there a way to change the planning plant of the production order at any time i.e in order creation or order confirmation? Because I need the GR against the production order to be done in plant B. Since the subsequent posting according to the business scenario would be after production, the goods should be sold from Plant A to Plant B via a sales order.
Your help would be greatly appreciated.
Panos

Hi Panos,
SPK 80 doesn't suit your requirement, since by design it is doing GR in the ordering plant.
Alternatively you need to work with a SPK like 40, that is stock transfer from B to A. Just set up the intercompany process for this stock transfer.
This way, when MRP in A detects a need for replenishment, a stock transfer requisition from B to A is created. Then MRP in B will create a planned order for production (that you will convert into a production order later). GR is in B. The stock transfer requisition is converted into a stock transfer order, and the actual transfer takes place.
Check also this for more details:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/f4/7d2d4d44af11d182b40000e829fbfe/content.htm
Regards,
Mario

Plannning Material and Plant for MRP Run

Hi,
If I have a material (01) extended on 2 plants, on one plant (A) we have production and planning/MRP + stock and on the other one (B), just stocking and transfer. B's requirements are to be entered and planned at A. I also want stock at B to be considered with stock at A when MRP runs at A. In the material master, I have some settings. I want to know if these would be any good:
Material 01 on Plant A:
MRP PD
Strategy 40
Lot size EX
Coverage profile applied
Material 01 on Plant B:
MRP ND/PD tried both
Strategy 40
Lot size EX
Coverage profile applied (same)
Planning material: Material 01 itself
Planning plant: Plant A
I particularly want to know about points 5 and 6. Will they make any difference if I run MRP on scope of planning(all plants) or just plant A? Will stock at B be considered? What difference does that setting make in my case? Please help!
Thanks!

No sales on Plant A. Only transfers and STO's. Stock is STO'd to Plant B (and other Plants, as well)
Plant B sells the stock.
Yes, I want to load the forecast in Plant A (COPA to SOP to DM to MRP). What do I do in this case?
I tried another case, as well. In that I put a special procurement on the material in Plant B view and marked it as external procurement. (the planning material and plant were there, didn't remove)
Then I entered the forecast in both plants separately (PIRs for both Plants) The requirements from Plant B made STPO Planned orders in Plant B and STCK Planned orders in Plant A. I am using coverage profiles (period is month, standard length 25 days, target 10 days for 1st period for 2 months, target 10 days for 2nd period for 1 month, target 10 days for the rest of the horizon) Not using any consumption modes.
The results I am getting don't make sense to me. I have attached screen shots for both plants MD04 and the MRP + work scheduling views

Donot want Planned Order to be created for STO in supplying Plant

Hi Gurus,
We have material A which in being produced in Plant 1000. This Material A is being used as a Component for a product in plant 2000. By Using Stock Transport order we get the material from supplying plant 1000.
when we run MRP for the plant 2000, schedule line is generated for the plant 2000. at the same time planned order is generated for the Material A in plant 1000.
My requirement is i dont want planned order to be created in supplying plant i.e plant 1000.
Afzal

Hi,
Let me Clarify my requirement again.
Material A is being Produced in plant 1000(supply). The same Material A is being used as Input material in plant 2000(Demand) for product B.
Master Maintained.
Material Master
I maintained Procurement type as F and Special Procurement as 40 in Plant 2000 for Material A.
I maintained Procurement type as E for Material A in Plant 1000.
Schedule Agreement
Schedule Agreement created in Plant 2000 referring plant 1000 as supplying plant and agreement type as LU.
Source List
Source List Created based on the schedule agreement and maintained MRP indicator as 2.
MRP Run
During MRP run for Product B in plant 2000, It creates schedule line for the Material A in plant 2000. At the same time it creates planned Order for material A in the supplying plant 1000.
My Requirement is we don't want the planned order in supplying plant 1000. The reason behind is that we want to run MRP in plant 1000 seperately at a different frequency.
Running MRP in plant 2000 should limit the requirements raising in plant 2000 only and the MRP run for 1000 should limit to plant 1000 only.
Message was edited by:
afzal ahmed

Authorization object for PLANNING PLANT

Hi all,
My client has different Planning plant & Production plant.
If I need to give access to GR for order (MB31), how do I know the authorization object for the Planning plant.
User should be given access to MB31 to the Planning plant & NOT to the Production plannt.
Any idea where we could find the authoriz. objects for a particular field?
Pls advise.

Goods Receipt for Production Order: Movement Type            M_MSEG_BWF
Goods Receipt for Production Order: Plant                    M_MSEG_WWF
these are the authorisation objects with activities as ACTVT and WERKS
Maintaine the values for ACTVT as
01 Create or generate,
02 Change
03 Display
04 Print, edit messages
and maintaine the values WERKS   (ur plants 4 which u want to give authorisations)
and BWAR ( movement types 4 which u want to give authorisations)

Priority field mandatory for planning plant-order type

Hi
Is there a standard way through configuration that I may contol priority field in order header to be mandatory for some order types only in one planning plant?
Problem is that if I make the priority field mandatory for order type, it will be so for all the planning plants which i dont want. Also i dont want it to mandatory at planning plant level since there are many order types under one planning plant and requirement is to make priority field mandatory only for some order types under this plant.
TIA.

Hi Tehsin
Thanks for the reply.
In the transaction we can separately make it mandatory for either planning plant or order type.
My requirement is for combination of both.

MD04 exceptions for planning plant and delivery plant

I have a material that is to be produced in another plant via a special procurement key. When a production order is created at times on MD04 I can see exceptions at the planning plant and not the delivery plant. Is there a way to make sure the planning plant displays the exceptions as well? Thanks in advance for any help.

I found the answer. Since planning is only expected to be done at the planning plant the rescheduling dates and exception messages only apply there. There isn't any config to allow the production plant to see the reschedule dates or exception messages.

Plant for PR in case of Centralized planning plant

Dear All,
In case of centralized planning, if a Service PR is created then it is taking the plant as the planning plant & not the maintenance plant.
For example: Maintenance pLant A & Maintenance Plant B have a common planning plant as "A" & if a PR is created for maintenance plant "B" then it is taking the plant as "A" & not the other.
please suggest where we can change the plant in case of service pr created through the maintenance order.
Regards,
Ritesh

Hi,
The planning plant will always be passed to the purchase requisition as you have found. Only alternative is to use a user exit
For components use exit COZF0002 (EXIT_SAPLCOZF_002). The exit is called on creating purchase requisitions for components from PM/CS orders. Customer exit COZF0001 can be used for external operations.
This exit allows change of fields in structure EBAN_ORD_CUST. Field WERKS is not included in this structure but you can append this field to the structure. After that you have to add a line into your exit (example):
... move afvgd-werks to EBAN_ORD_CUST-WERKS...
Through this method it should be possible to change the plant on the requisition.
-Paul
Use the forum Enterprise Asset Management (EAM) for PM/CS specific topics
Enterprise Asset Management (SAP EAM)

Change of planning plant in the production Order

Dear Sapians
Please suggest me how we can change the planning plant in the production order once it is saved and confirmed before taking goods receipt.
Thanks
GVRR

Hi Prasanna,
1. Order is with material
2. This order is created independently
3. yes there are dependent requirements
Scenario is we have created Production orders with X plant. Later after confirmation and before GRN planning plant is changed as per the business decission. Now client wants to receive the goods in new planning plant.
I want to know, How can business area and functional area help us to receive the goods in changed planning plant scenario. can we maintain the plant values in this fields.
Regards
GVRR

More than one Planning plant for a maintenance plant.?

hi Friends, can we have more than one Planning plant for a maintenance plant.Is there any advantage or disadvantage of this condition.?

Hi,
     You can have Maintenance Planning Plant & Maintenance Plant in any of the follwing ratios, i.e., 1:1 / 1:n / n:1. Actually in Maintenance, there can be electrical & mechanical maintenance.
          In the case of 1:1 relation, all the maintenance activities (Electrical & Mechanical) will be planned by single Maintenance Planning Plant for single Maintenance Plant.
        In case of 1:n, single maintenance planning plant will do the plaaning of maintenance activities for all the maintenance plants.
      In case of n:1, electrical activity will be planned by one Maintenance planning plant & mechanical activities by another planning plant for a single Maintenance plant.
      Defining Maintenance planning plant & maintenance plant in different relations will help us in generating different kind of reports.
I am looking forward your reply.
Regards,
Maheswaran.

Planning Plant & Production Plant configuration for MRP

Similar Messages

Maybe you are looking for