Planning Plant usage

Hi,
I want to know the usage of the field Planning Plant, which is in MRP-3 view. Please throw some lights on this.
regards,
V. Suresh

Hi,
Planning plant
Key which specifically identifies the plant from which the planned independent requirements of the reference material comes from.
Use
You maintain planned independent requirements for the planning material entered here. If a sales order/customer requirement is posted for the material in question, the sales order quantity consumes the planned independent requirements of the planning material. The planning material is not actually produced itself. If is only used for planning non-variant parts and for consuming the planned independent requirements.
Note
In this planning strategy, the system uses the consumption mode maintained for the planning material to determine how many days into the future or the past consumption is to be carried out. The means that you must maintain the consumption mode for this strategy must be maintained in the material master record.
Example
The material master record 4711 contains the material 4712 as a planning material. The planning material contains the BOM with the non-variant parts. You create planned independent requirements for material 4712. When creating a sales order for material 4711, the system realizes that material 4712 is the planning material for material 4711. Then the sales order for material 4711 consumes the planned independent requirements of material 4712.
Dependencies
A valid material master record must exist for the planning material in the planning plant. The material master record of the planning material cannot contain a planning material as this procedure can only be carried out at single-level.
Further Planning Plant is used in case of following strategy groups for in house production:
60     Planning with planning material
61     Plng with plng material / project settl.
63     Planning w.plng material w/o mke-to-ord.
65     Planning variants with planning material
Hope this helps.
Regards,
Tejas

Similar Messages

BOM is not getting displayed in case of centralized planning plant.

Dear All,
there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
kindly through some light on it. whether i have to do some settings for it.
Regards,
Ritesh Kapoor

Hi,
Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
Ritesh

Plant for PR in case of Centralized planning plant

Dear All,
In case of centralized planning, if a Service PR is created then it is taking the plant as the planning plant & not the maintenance plant.
For example: Maintenance pLant A & Maintenance Plant B have a common planning plant as "A" & if a PR is created for maintenance plant "B" then it is taking the plant as "A" & not the other.
please suggest where we can change the plant in case of service pr created through the maintenance order.
Regards,
Ritesh

Hi,
The planning plant will always be passed to the purchase requisition as you have found. Only alternative is to use a user exit
For components use exit COZF0002 (EXIT_SAPLCOZF_002). The exit is called on creating purchase requisitions for components from PM/CS orders. Customer exit COZF0001 can be used for external operations.
This exit allows change of fields in structure EBAN_ORD_CUST. Field WERKS is not included in this structure but you can append this field to the structure. After that you have to add a line into your exit (example):
... move afvgd-werks to EBAN_ORD_CUST-WERKS...
Through this method it should be possible to change the plant on the requisition.
-Paul
Use the forum Enterprise Asset Management (EAM) for PM/CS specific topics
Enterprise Asset Management (SAP EAM)

Work Order - Maintenance Planning plant change

Hi Gurus,
Is there any way to change the maintenance planning plant in a created work order? We are having an issue on work orders and we need to tranfer our open work orders to another plants to solved the issue. Please me let me know if this is possible to do in SAP. And let me know how to do it in SAP.
Thanks in advance,

Hi,
The start of the plan is not option as this will surely have an impact. Anyway, work around for this issue was provided and this is OK now. We will continue with the old orders untill such time they will finally be closed. No postings will be created against this old orders and if there's a need to do GR new orders will be created in new plants for the postings.
Thanks for you help,

Change of planning plant in the production Order

Dear Sapians
Please suggest me how we can change the planning plant in the production order once it is saved and confirmed before taking goods receipt.
Thanks
GVRR

Hi Prasanna,
1. Order is with material
2. This order is created independently
3. yes there are dependent requirements
Scenario is we have created Production orders with X plant. Later after confirmation and before GRN planning plant is changed as per the business decission. Now client wants to receive the goods in new planning plant.
I want to know, How can business area and functional area help us to receive the goods in changed planning plant scenario. can we maintain the plant values in this fields.
Regards
GVRR

How to change planning plant in Maintenance order

Hi experts ...
In maintenance order , depending on equipment , the planning plant gets defaulted . If Equipment is installed in another FL whose planning plant is different , the order's planning plant doesn't change (Greyed) . Is there anyway to change planning plant in orders
NPB

We have maitenance and planning plant same .Equipment was in maintenance plant XYZ and planning plant XYZ earlier . Now the same equipment is in maintainance plant ABC and planning plant ABC . In order , I am able to change maintenance plant to ABC , but unable to change the planning plant to ABC .
If I do not change planning plant and change only maintenence plant , what are the effects in cost reporting ? Since ultimately cost is settled to equipment cost center (which is now changed to ABC cost center) , I feel there will not be any effect . Old planning plant may only affect search right ? ....Please advise ...
NPB

Change planning plant in production order

Hi Gurus,
my business scenario is the following:
I have 2 plants that are assigned to 2 different company codes. Plant A (ordering plant) and Plant B (supplying plant).
The users place a sales order on plant A and through MRP with special procurement key 80 the planned order is turned into a production order in plant B.
But in the order confirmation the system tries to post the GR in plant A. Is there a way to change the planning plant of the production order at any time i.e in order creation or order confirmation? Because I need the GR against the production order to be done in plant B. Since the subsequent posting according to the business scenario would be after production, the goods should be sold from Plant A to Plant B via a sales order.
Your help would be greatly appreciated.
Panos

Hi Panos,
SPK 80 doesn't suit your requirement, since by design it is doing GR in the ordering plant.
Alternatively you need to work with a SPK like 40, that is stock transfer from B to A. Just set up the intercompany process for this stock transfer.
This way, when MRP in A detects a need for replenishment, a stock transfer requisition from B to A is created. Then MRP in B will create a planned order for production (that you will convert into a production order later). GR is in B. The stock transfer requisition is converted into a stock transfer order, and the actual transfer takes place.
Check also this for more details:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/f4/7d2d4d44af11d182b40000e829fbfe/content.htm
Regards,
Mario

More than one Planning plant for a maintenance plant.?

hi Friends, can we have more than one Planning plant for a maintenance plant.Is there any advantage or disadvantage of this condition.?

Hi,
     You can have Maintenance Planning Plant & Maintenance Plant in any of the follwing ratios, i.e., 1:1 / 1:n / n:1. Actually in Maintenance, there can be electrical & mechanical maintenance.
          In the case of 1:1 relation, all the maintenance activities (Electrical & Mechanical) will be planned by single Maintenance Planning Plant for single Maintenance Plant.
        In case of 1:n, single maintenance planning plant will do the plaaning of maintenance activities for all the maintenance plants.
      In case of n:1, electrical activity will be planned by one Maintenance planning plant & mechanical activities by another planning plant for a single Maintenance plant.
      Defining Maintenance planning plant & maintenance plant in different relations will help us in generating different kind of reports.
I am looking forward your reply.
Regards,
Maheswaran.

Authorization object for PLANNING PLANT

Hi all,
My client has different Planning plant & Production plant.
If I need to give access to GR for order (MB31), how do I know the authorization object for the Planning plant.
User should be given access to MB31 to the Planning plant & NOT to the Production plannt.
Any idea where we could find the authoriz. objects for a particular field?
Pls advise.

Goods Receipt for Production Order: Movement Type            M_MSEG_BWF
Goods Receipt for Production Order: Plant                    M_MSEG_WWF
these are the authorisation objects with activities as ACTVT and WERKS
Maintaine the values for ACTVT as
01 Create or generate,
02 Change
03 Display
04 Print, edit messages
and maintaine the values WERKS   (ur plants 4 which u want to give authorisations)
and BWAR ( movement types 4 which u want to give authorisations)

Material Plant Level or Planning Plant Level

Hi Experts,
May i know what ever the material lying in the warehouse whether it is showing the stock at Maitnenance Plant level or Planning Plant level.
Also is it possible to keep the inventry at Maintnenace Plant level.
Please provide your valuable information.
AR

Hi Experts,
You mean to say if there is no planning Plant we cant make the inventory ? Please correct me if i am wrong.
Also i want to know is it possible to maintain the stock at Maintenance Plant level.Because we have four Maintenace Plant 8000,4000,1000 & 6000 and all four are assigned under one Planning Plant 2000. Here i want to know is it posssible to maintain the stock under all four Maintenance Plant if yes then what i have to do for the same.
AR

Effect of Planning Plant in Tasklist

Dear All,
I having one query related to Tasklist in PM
There are two Plants X and Y
Earlier tasklist created for Planning plant as X at header level.
Now Planning plant X has been closed , Instead of that need to use Planning plant Y.
There is no issue related to maintenance work cernter and associated Plant.
In my PM order Planning plant only showing at operations level only.
At header level planning plant can't be change , Is there any issue if i will use old one planning plant ??
Please advise the effect of Planning Plant.
Thanks,
Abhishek

Greetings Abhishek,
For starters, if you do not migrate the Task Lists into the new Planning Plant, you will not be able to select them when including the Task List in a new Work Order, or assign them to a Maintenance Item, if they are created for the new Planning Plant. And the Maintenance Order or Item has the Planning Plant on Header level.
Therefore, as recommended by Pete Atkin, you ought to migrate all your old Planning Plant X Task Lists into Planning Plant Y. It's also a good opportunity to cleanse your data.
PS. Pete, my sincere congratulations on the well-deserved Diamond!

Is it possible to change Planning Plant in General Task list

Hello Gurus,
Is it possible to change Planning Plant in General Task list, ie. for eg.
Earlier I have General Task list Group:22, Group Counter:1, with Planning Plant:0001 & now i want to change/update new planning plant 0002 instead of old 0001 in the same task list.
could you plz suggest me, is it possible? & how to do changes?
Thanks in Advance.
Regards,
Amol

HI Amol,
Its not possible to change the Planning plant , You can delete that task list or you can put deletion flag on it, and go for new creation
Riyaj

No Authorization for Planning plant in MIGO

Hi Gurus,
I have an issue for the Goods Receipt for multiple line items of account assigned( F) PO.
When user try to receive goods thru MIGO, system throws an error (dump) saying "NO AUTHORIZATION FOR PLANNING PLANT XXX" even though roles are assigned to the user.
I went thru the OSS note 385830 but it hardly helped me.
Pls throw some light on the issue...
Regards
Shashidhar

Hi,
Check for the Authorization Object that system is referring for the error in SU53 transaction. You may process the transaction and once the error comes, go to transaction SU53 check for the Authorization object there.
You can check the roles available for a given authorization object in SUIM transaction.

Priority field mandatory for planning plant-order type

Hi
Is there a standard way through configuration that I may contol priority field in order header to be mandatory for some order types only in one planning plant?
Problem is that if I make the priority field mandatory for order type, it will be so for all the planning plants which i dont want. Also i dont want it to mandatory at planning plant level since there are many order types under one planning plant and requirement is to make priority field mandatory only for some order types under this plant.
TIA.

Hi Tehsin
Thanks for the reply.
In the transaction we can separately make it mandatory for either planning plant or order type.
My requirement is for combination of both.

System not allow to change planning plant

Hi Experts,
My problem is I changed company code , maintenance plant & planning plant in old system as per client requirement. They are using same system from last 4 years. I changed all require setting in customization but now problem is that in equipment task list system does not allow to change the planning plant in header data of IA02 T code. I updated the new planning plant in Function location master,Equipment master , Work center & assign it planner group but even system shows the old planning plant in task list header data. System shows the planning plant data in display mode.
Pl advice from where system link the planning plant field in task list header data.
Thx in adavance.
AVI DDS

Avi
Pete is right. There is no way you can change the planning plant in the Task Lists
Task list creation is done for a planning plant & you will not be able to use the existing tasklist for your updated equipments having different PPlants.
The only way to proceed is to create new tasklists
Delete the old assignments of the tasklists to the maintenance item & reassign the new tasklists to the existing items
In case you dont want the tasklists in the system itself, you will have to delete the tasklists - ie mark the deletion indicator in the change mode & archive the TLs.
Regards
Kartik

Planning Plant usage

Similar Messages

Maybe you are looking for