Planning run w.r.t dates

hi plz guide me,
MY REQUIREMENT IS THAT
while running the MRP, system sud take only previous 30 days situation as well as the time what i have defined in planning horizon of MD61
e.g
if today(25.04.08) i run the MRP, then system sud take the situation from 26.03.08 to till date i.e 30 days before only not earlier than that.
waiting for yr response...

if that is the case, then systems takes the requirement from today + 30 days i.e, till 24.05.2008 and create receipt elements in std SAP. Is it happening...and there is no other setting for this.
are you using MRP group, as MRP group setting may be different..just check,..which transaction you are using to run MRP?

Similar Messages

Reschedulig Date Problem in Planning Run

Hello All,
Need Clarification..
The Scenario:
The Requirement date (OrdRes) is 13.02.2009, The planned Order generated is on 13.02.2009.
Now the OrdRes Date Changed Manually to 27.01.2009.
After Background MRP Run, in MD04 against the planned order, the Rescheduling date proposed is 27.01.2009 and exception message is 30 ( Plan process according to schedule).
System is Proposing the date, but not actually shifting the planned order.
If I re-run the MRP Manually, the Rescheduling is happening.
What at first place the rescheduling not happened? after manual MRP run the rescheduling happening?
P.N:
1. The Planned Order is not Firmed
2. The Planning Parameters are same for Background Run and Manual one.
Your inputs are highly appreciated..
Regards,
Siva

Hi Siva Kumar,
Once u change the delivery date (order rervation of Header), system will create planning file entry for Child materail and set Exception message 30 of child planned order
When u run the MRP next, child material should be included in the Planning Run and rescheduling should be happened .
This is what my finidings, Please check.
Pradeep

SNP Optimiser issue (Annual Planning Run)

Dear Friends,
My fiscal year is 01.04.2010 to 31.03.2011, Now I am trying to run Annual planning run for the current FY.
After the run, If i see in SNPOPLOG, all demand is showing as unfulfilled. If i run for the next FY it is planning.
I want to run for the current FY, what settings I need to do?
sree

What is the time bucket profile of data view in which u are running optimizer. If it is a single yearly bucket you cannot run optimizer in current year. (your first bucket cannot have the start date in past)
Choose 12 monthly buckets. and run planning. You may 'view' the planning results in single annual bucket.
even if you do this, there will be no plan in current month. system will plan from next month onwards.
Hope this helps.
Regards,
Nitin
Edited by: Nitin Thatte on Apr 13, 2010 6:01 PM

Error occurred during CTM planning run

Hi folks,
Appreciate your co-operations!
I am facing the problem while running the CTM with the profile DEMO2.
CTM Planning Run gives one error and alert.
Error: Error occurred during CTM planning run
Technical Data
Message type__________ A (Cancel)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 401
Problem class_________ 1 (very important)
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ A
Alert: Internal error has occurred (<!> Segmentation fault)
Technical Data
Message type__________ E (Error)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 571
Message variable 1____ <!> Segmentation fault
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ C
Log file display
 04:37:59 optsvr_main.cpp(1363) 'SuperVisor' => Commandline : 4 respected parameters ...
Args:
m0001006
sapgw04
28812935
IDX=1
 04:37:59 optsvr_main.cpp(645) 'SuperVisor' * SAP APO CTM Engine [CTM/ctmsvr]
 04:37:59 optsvr_main.cpp(646) 'SuperVisor' * Copyright u00A9 SAP AG 1993-2009
 04:37:59 optsvr_main.cpp(647) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(648) 'SuperVisor' * Version : 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
 04:37:59 optsvr_main.cpp(649) 'SuperVisor' * Platform : ntamd64/x64
 04:37:59 optsvr_main.cpp(650) 'SuperVisor' * Interface : 2.0
 04:37:59 optsvr_main.cpp(651) 'SuperVisor' * Build date : Nov 25 2009 22:59:47 [1259186387]
 04:37:59 optsvr_main.cpp(652) 'SuperVisor' * Build machine : PWDFM163
 04:37:59 optsvr_main.cpp(653) 'SuperVisor' * Latest change : 407661
 04:37:59 optsvr_main.cpp(654) 'SuperVisor' * NW release : 7100.0.3300.0
 04:37:59 optsvr_main.cpp(655) 'SuperVisor' * Perforce branch: 7.0_REL
 04:37:59 optsvr_main.cpp(656) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(676) 'SuperVisor' * Hostname : m0001006
 04:37:59 optsvr_main.cpp(677) 'SuperVisor' * OS version : 5.2.3790 (WinServer2003, NTAMD64) SP2.0 (Service Pack 2), SERVER ENTERPRISE TERMINAL SINGLEUSERTS
 04:37:59 optsvr_main.cpp(678) 'SuperVisor' * PID : 6768
 04:37:59 optsvr_main.cpp(683) 'SuperVisor' * CWD : D:\usr\sap\SC6\DVEBMGS04\log
 04:37:59 optsvr_main.cpp(684) 'SuperVisor' *
 04:37:59 core_sysinfo.cpp(453) 'SuperVisor' * free disk space: 190433 MB
 04:37:59 core_sysinfo.cpp(454) 'SuperVisor' *
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * Memory information:
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * physical memory: 10238 MB total, 6511 MB available [63% free]
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * page file : 73212 MB total, 60889 MB available [83% free]
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * virtual memory : 8388607 MB total, 8388499 MB available [99% free]
 04:37:59 optsvr_main.cpp(693) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(783) 'SuperVisor' * running in invoke mode
 04:37:59 optsvr_rfcconnection.cpp(871) 'MsgMgr' <RFC> RfcPing(RFC_HANDLE=1) received in thread#6912
 04:37:59 optsvr_rfcconnection.cpp(692) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_SET' for sending of parameters/options
 04:37:59 optsvr_rfcconnection.cpp(703) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_GET' for receiving of parameters/options
 04:37:59 optsvr_rfcconnection.cpp(712) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PROGRESS' for progress informations
 04:37:59 optsvr_rfcconnection.cpp(721) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_MESSAGE' for messages
 04:37:59 optsvr_rfcconnection.cpp(730) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_RESULT' for (intermediate) result informations
 04:37:59 optsvr_rfcconnection.cpp(739) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_SYSINFO' for system informations
 04:37:59 optsvr_rfcconnection.cpp(748) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PERFINFO' for performance informations
 04:37:59 optsvr_rfcconnection.cpp(1269) 'MsgMgr' <RFC> skipping empty profile value [GENERAL] sPROFILE_CUST_ID
 04:37:59 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 7
number of received data: 10569
number of sent data : 1349
overall reading time : 9073
overall writing time : 162
 04:37:59 optsvr_main.cpp(1110) 'SuperVisor' * Starting MainScript ...
 04:37:59 optsvr_main.cpp(1445) 'SuperVisor'
***************************** OPTSVR - OPTIONS ***************************** *
[CTM_PROFILE]
nCTMENGINEPACKAGESIZE = 500
sCOMPONENT = SCM
sCTMLOGFILE = ctm.DEMO2.0000_0001.20091201043758.log
sCTMLOGFLAG = 0
sCTMPROFILE = DEMO2
sRELEASE = 700
[general]
bUNICODE = true
nSLOT_MAXIMUM = 1
nSLOT_MINIMUM = 1
nSLOT_RESERVED = 1
sAPO_RELEASE = 700
sAPPLICATION = CTM
sExeDir = d:\apoopt\ctm\bin
sExeName = ctmsvr.exe
sHOST = m0001006
sInvokeMode = invoke
sLANGU = E
sMANDT = 700
sPRODUCT_NAME = APO
sPRODUCT_PATCHLEVEL = 0001
sPRODUCT_RELEASE = 700
sPROFILE = DEMO2
sSESSION = tju5Bmz21}6WVG0Sn6pv3W
sSYSTEM = SC6
sUNAME = MBATCHA
[init]
sSECTION0001 = INIT
sSECTION0002 = GENERAL
sSECTION0003 = PASSPORT
sSECTION0004 = CTM_PROFILE
[PASSPORT]
bIS_REMOTE = false
nACTION_TYPE = 1
nSERVICE = 1
sACTION = /SAPAPO/CTMB
sPRE_SYSID = SC6
sSYSID = SC6
sTRANSID = 2205DEDE7A5BF16DA07D001CC46CF90E
sUSERID = MBATCHA
************************** OPTSVR OPTIONS - END **************************** *
 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
 04:37:59 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->download
 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 806 to OutputInterface from [MG]
 04:37:59 ctm_modelgen.cpp(166) 'CTMModelGenerator' ======================================================================
 04:37:59 ctm_modelgen.cpp(167) 'CTMModelGenerator' MG::download
 04:37:59 core_msgmgr.cpp(1110) 'MsgMgr' renaming tracefile
 04:37:59 core_msgmgr.cpp(1111) 'MsgMgr' old name: optsvr_trace20091201_043759_1a70.log
 04:37:59 core_msgmgr.cpp(1112) 'MsgMgr' new name: ctm.DEMO2.20091201_043759_1a70.log
logfile reopened : Tue Dec 01 04:37:59 2009
logfile name : ctm.DEMO2.20091201_043759_1a70.log
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PRDAT_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPAR_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_LOC_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PPM_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_TRANS_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_RES_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SSTCK_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_CAL_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPER_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_INCMD_RFC_READ
 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_DEM_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SUP_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_UCMAP_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:04 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 810 to OutputInterface from [MG]
 04:38:04 ctm_modelgen.cpp(735) 'CTMModelGenerator' MG::download done
 04:38:04 ctm_modelgen.cpp(736) 'CTMModelGenerator' ======================================================================
 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CTMModelGenerator' [6]->download = success [ctx size : 1]
 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Solve' with 9.22337e+012 seconds left
 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Match' with 9.22337e+012 seconds left
 04:38:04 ctm_executionmanager.cpp(102) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(103) 'SuperVisor' statistics:
 04:38:04 ctm_executionmanager.cpp(104) 'SuperVisor' number of demands: 7
 04:38:04 ctm_executionmanager.cpp(105) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(107) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(108) 'SuperVisor' parameters:
 04:38:04 ctm_executionmanager.cpp(118) 'SuperVisor' time continuous planning
 04:38:04 ctm_executionmanager.cpp(125) 'SuperVisor' backward scheduling
 04:38:04 ctm_executionmanager.cpp(184) 'SuperVisor' CBCLP enabled
 04:38:04 ctm_executionmanager.cpp(457) 'SuperVisor' ======================================================================
 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CtmEngine' [7]->run
 04:38:04 ctm_executionmanager.cpp(523) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(524) 'SuperVisor' EM::execute for packet 1
 04:38:04 ctm_executionmanager.cpp(1570) 'SuperVisor' EM::execute for packet 1 done
 04:38:04 ctm_executionmanager.cpp(1571) 'SuperVisor' ======================================================================
 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CtmEngine' [7]->run = success [ctx size : 1]
 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->upload
 04:38:04 ctm_modelgen.cpp(1097) 'CTMModelGenerator' ======================================================================
 04:38:04 ctm_modelgen.cpp(1098) 'CTMModelGenerator' MG::upload of packet 1
<e> 04:38:05 ctmsvr_script.cpp(229) 'SuperVisor' <!> STRING EXCEPTION : <!> Segmentation fault
 04:38:05 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:05 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_NTAMD64 = 45344
[CHECK_LOWERBOUND]
 04:38:05 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
tracefile ctm.DEMO2.20091201_043759_1a70.log
 04:38:05 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
ENGINE_VERSION 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
nCPU_TIME 0
nHD_FREESPACE 190433
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
 04:38:05 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
 04:38:05 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...
 04:38:05 core_memmgr.cpp(564) 'MsgMgr' transferring memory of heap 6912 to main heap
 04:38:05 core_memmgr.cpp(606) 'MsgMgr' finished transfer of heap 6912
 04:38:05 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 116
number of received data: 420457
number of sent data : 39262
overall reading time : 5.30093e+006
overall writing time : 3831
 04:38:05 optsvr_main.cpp(1332) 'MsgMgr'
OptimizeServer says GOOD BYE
Please help me to resolve this issue.
Thanks & Regards,
Khadar

Hi Khadar,
1) The information you have provided is the CTM optimiser log.
Run the job in background and in sm37 and click on job log &
analyse the exact error happened. In case if you are not able
to do, please provide the error log.
2) Check the livecache is stable in its operations when the job
runs (check with basis team)
3) Run consistency check for master data before CTM run
4) Check for any struck queues and clear those and rerun
5) If you feel more inconsistencies in system, run livecache
consistency and rerun CTM run
Regards
R. Senthil Mareeswaran.

End Planning Run After Order Selection - issue not clearing down all plans

Hi,
We are using the CTM Profile with "End Planning Run After Order Selection" ticked in the basic settings tab in order to clear down previous CTM runs. So we have a CTM deletion profile.
The issue is that it requires more than one execution to clear down the Planned Orders / Purchase Requisitions. You execute the Deletion CTM Profile once and it will clear down some of the Purchase Requisitions and Planned Orders and leave some still in place. You then have to execute the deletion CTM profile one or two more times in order to delete the remaining Planned Orders / Purchase Requisitions.
This is clearly not realiable for a batch process to clear down plans. Has anyone else experienced this and does anyone have a solution. The solution cannot be based on RLCDELETE or /SAPAPO/DELETE_PP_ORDER
Mark

Hi,
Can you check your planning mode and deletion mode combination defined in the ctm profile.
Prerequisties for deleting the orders:
u2022 They are within the planning and deletion periods
u2022 They do not have pegging relationships with demands outside of the planning period
They lie outside of the production horizon, stock transfer horizon and the planned delivery time
In addition, all location products of an order must be included in the Master Data Selection so that CTM can
delete the order. Also, CTM cannot delete any manually fixed orders.
If you have selected the SNP Order order type in the CTM profile, CTM cannot delete any PP/DS orders. This
restriction is also valid the other way round for the PP/DS Order order type. If you select this order type, CTM also
deletes SNP orders.
Thanks,
nandha

Exclude stock at a storage location from the Productionn Planning run

Hi,
We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
Please suggest a way so that it is excluded from the Production planning
Regards,
Sireesh

Hi Sireesh,
Please try these following options.
1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
2) Try anyof these user exists
APOBP011 Enhancement for Stock BAPIs (BUS10504)
APOCF011 Inbound Processing: Stock
APOCF027 Customer-Specific Enhancements: Stock
3) Exclude the category from the ATD receipts category group maintained in the master data
Regards
R. Senthil Mareeswaran.

How to Check Error Log for Supply Planning Run

Hi All
I am getting error in supply planning run. I see the status under Excel Add-in >Supply Planning > Status. However there is no detailed error message here
How can I check the detailed log of this error to understand what is going wrong.
Can anybody guide on what can be probable causes of the error
Any help is highly appreciated
Thanks
Vijay

Hello Vijay, Wade
Can you run the Supply Planning in Simulation mode? Under the simulation drop-down you can also see 'Show Message'.
Open it after your planning run to see list of any data inconsistencies.
Thanks
Pramod

Launch ASCP plan run very long time

Hi,
I launched constrained ASCP plan and it took very long time. I launch ASCP plan in friday and it still not finished yet till monday, Memory Based Shapshot & Snapshot Delete Worker are still running, Loader Worker With Direct Load Option is still in pending phase. MSC: Share Plan Partitions has been set to Yes.
When I run query below :
select table_name,
       partition_name
from   all_tab_partitions
where table_name like 'MSC_NET_RES_INST%'
OR     table_name like 'MSC_SYSTEM_ITEMS%'
order by substr(partition_name,instr(partition_name,'_',-1,1)+1);
The results are:
MSC_SYSTEM_ITEMS
SYSTEM_ITEMS_0
MSC_NET_RES_INST_AVAIL
NET_RES_INST_AVAIL_0
MSC_SYSTEM_ITEMS
SYSTEM_ITEMS_1
MSC_SYSTEM_ITEMS
SYSTEM_ITEMS__21
MSC_NET_RES_INST_AVAIL
NET_RES_INST_AVAIL__21
MSC_NET_RES_INST_AVAIL
NET_RES_INST_AVAIL_999999
MSC_SYSTEM_ITEMS
SYSTEM_ITEMS_999999
Please help me how to increase the performance when launching the plan. Is change MSC: Share Plan Partitions to No the only way to increase the performance in running plan?
Thanks & Regards,
Yolanda

Hi Yolanda,
a) So does it means that plan was working fine earlier but you are facing this issue recently.. ? If so then what you have changed at server side or have you applied any recent patches.. ?
b) If you have not completed plan for single time,
I will suggest that run data collection in complete refresh mode for one organization which is having relatively small data. Further, you can modify plan options in order to reduce planning calculation load like
- disable pegging
- remove any demand schedule / supply schedule / global forecast etc
- enable only single organization which having relatively small demand and supply picture
- disable forecast spread
Once one plan run will be completed, then expand your collection scope to other organizations and also enabling above mentioned setting.
There are lots of points need to consider for performance issue like server configuration, hardware configuration, num of demands etc. So you can raise SR in parallel while working on above points.
Thanks,
D

Regenerative planning run in APO

Hi experts,
I need your input on the following scenario.
We have APO PPDS implemented for our Manufacturing industry client. We have designed to run only Net Change Planning every day and there is no design to run Regenerative Planning.
What is the importance of running Regenerative Planning? What do we lose if we don't run a regenerative planning?
We have CTP scenario, so there are lot of parts planned automatically.
Is there any impact of automatic planning on Regenerative planning and vice versa?
What is the best practice to follow with respect to Regenerative Planning?
I appreciate if someone could answer these questions. Thanks in advance.
Regards,
Manimaran M.

Hello Mani
Following are details are from old SAP Handbook, good information to understand the concept.
====
Net Change Planning
Automatic material requirements planning is especially hard on system performance for production processes with complicated BOM structures. To guarantee frequent planning runs of those materials which are relevant for planning despite this problem, you can carry out the planning run with the "net change planning" procedure. This process only plans those materials which have undergone a change relevant to material requirements planning (for example, change in a production order due to excessive scrap, a new sales order, and so on) since the last planning run.
The so-called planning file exists especially for the planning run and contains all the materials and their respective MRP types. If a material is changed in a way that is relevant to the planning run, it is given a net change indicator meaning that it will be included in the next net change planning run. In a net change planning run, only these materials are planned.
Net Change Planning in the Planning Horizon
Performance can be improved even further by using the net change planning run in the planning horizon. Here, only those changes relevant to requirements planning that fall within a specific period (defined by the user and known as the planning horizon) are included in the planning run. It is advisable in this situation to carry out a total planning run in regular intervals (for example, weekly or monthly) to keep the planning results completely up-to-date.
Regenerative Planning
It is also possible to carry out a regenerative planning run. In this planning run, the system plans all materials that are relevant for planning. Usually, the regenerative planning run is only carried out in the implementation stages.
===
Hope this will help.
Thank you
Satish Waghmare

Planning Run through MD01

I was trying to take planning run for several plants,
made necessary config in spro, but unable to generate plan orders,
when i taking planning run through MD02, Plan order for material is generated, Kindly help me to find where i have missed the settings, no error is cooming when i am taking planning run

Hello Abhay,
MD01 is not advisable to run for all plants (if you are working with scope of planning). Run the same from MDBT transaction in background and check the spool log once this MRP finish...This will be better advisable from SAP. here you will come to know which materials are planned or which are not.
1) Check the controller parameters are same of your MD02 and MD01 to create planned orders.
2) Check indicator 3 delete and recreate data in controller parameter for MD01.
3) Check planned all components from the sane screen.
4) Run with regenerative planning if it is first time.
Run the job from SE38 with variant to create plannig file entries for all parts in plants.
Check whether MRP area activate check box is active or not in customizing...check the same whether plant level MRP indicator activated in customizing.
Please let me know whether your problem is solved. Thanks
Regsrds...
TAJUDDIN

Error while production planning run

Hi,
I got this error "No gap for activity ||| found within the planning horizon" during production planning run.
Diagnosis
    There is not a large enough gap for the activity ||| on the mode
    1- in the planning period specified in the time profile.
System Response
    The system does not schedule or reschedule.
What could be the reason for this error ? Kindly help.

Hi,
   One reason could be the Time Bucket.
Please check your time series assigned for production planning run.
Check the PPMs and maintain the scheduling data .
Please let me know that whether you have transferred the data from R/3(Materials, WorkCenters, BOMs,PPMs) or you are doing manually in APO.
Let me know then i can tell you the right approach.
Regards,
Santosh

Executing Personal cost plan run

Hi ECM Gurus,
We are to do budgeting through PCP, we have created our own data collection methods to load IT0666 and when we tried to Execute the Planning Run for the Period 01/01/2011 - 12/31/2011 we are expecting the same value to roll up to the org units as in IT0666. But for the New Hires after 01/01/2011 system is prorating the budget value from IT0666 whereas we have already stored prorated value for each employees in IT066.
Can any one please guide me on how to avoid the proration during Manage Cost Plan PHCPADMN.
Thanks.

All planning data that you generate in a defined period for a specific planning scenario based on a specific data basis.
A personnel cost plan allows you to define all information that is necessary for generating planning data such as planning scenario, planning period, and data source. By performing cost planning runs you fill the personnel cost plan with data.

Identify Jobs that are not running on their Scheduled date time

I have 29 scheduled jobs that run at different intervals of time. Some run once a day. few others run on hourly basis while others run on Sundays.
I was working on a query that would let me know if a particular job did not run on its scheduled date and time.
SELECT * from all_scheduler_jobs WHERE state <>'DISABLED'; will give me a list of all jobs that I have to monitor and that are not in the disabled state. But how can I verify that the jobs are running at their scheduled date time?
Any help please? I need to create a view of all such jobs and then plan to send an alert so that appropriate action can be taken and it is assured that all important jobs run as per schedule.
Thanks.

Hi,
I can see 2 approaches.
- for jobs that have run but ran very late you should query dba_scheduler_job_run_details and filter by the difference between req_start_date and actual_start_date
- for jobs that should have run but shouldn't, query for DBA_SCHEDULER_JOBS jobs that are SCHEDULED where next_run_date is in the past
Hope this helps,
Ravi.

HT1688 when you double tap the home button to go back to your other apps are those apps always running and using cellular data even if I am not currently using them? I thought it froze them and didn't use data other that a select few apps like Facebook,

when you double tap the home button to go back to your other apps are those apps always running and using cellular data even if I am not currently using them? I thought it froze them and didn't use data other that a select few apps like Facebook, email, etc. Also I always select no when I download an app and it wants me to have those push notifications. Because that would mean that I would have to delete my apps after everytime I just them from that bar and that would be very annoying and just stupid. Or maybe apps do use data and it's just a big scheme to make everyone go over on their data plans.

This should help: http://speirs.org/blog/2012/1/2/misconceptions-about-ios-multitasking.html.

Load Plan parallel execution hanged after data warning

We are having 9 scenarios executing in parallel in a Load plan. Whenever we get data quality warning for certain interface, the error data get written to E$ table, and execution of this scenarios get completed with warning yellow sign. But after this scenario next scenario didn't execute and LP remain in the running mode.
But when I break the parallel steps in a group of 2 scenarios, it run fine and completed all the steps even after warnings.
Does this means it depend on Agent setting, as currently we have only one agent setup on weblogic server.
Thanks
Sanjeet Singh
Edited by: 963648 on Oct 7, 2012 2:36 AM

There was Oracle bug "Bug 13324950 : LOAD PLAN EXECUTION REMAINS IN RUNNING STAT WHEN ONE PARALLEL SCEN TRACKS ERRORS"
Patch 14550964: LOAD WHEN USING THE ODI LOAD PLAN, THE LOADING STOPS WHEN THERE IS A WARNING to fix the issue.Pls note when you search this patch in the system, it will return two patches for 11.1.1.5 and 11.1.1.6.3 receptively. Pls choose the right version.

Planning run w.r.t dates

Similar Messages

Maybe you are looking for