Planning Sequence error - You do not have sufficient authorization

Hello Experts,
I am encountering the following error during execution of my planning sequence:
You do not have sufficient authorization
Message no. EYE007
Diagnosis
You do not have sufficient authorization for the requested data records.
Procedure
Either select other data or get the required authorizations from your administrator.
Can anyone please suggest me what could be the possible cause of this error and how can I overcome it?
Thanks in advance,
Nitish.
Edited by: Nitu_0105 on Jan 12, 2012 11:54 AM

Check the planning level on which planning sequence is based for values restriction.Looks like values for which it is been restricted you are not authorized or Roles assigned to you are not restricted with values in planning level.
Also check if level is been restricted with any variable on which authorization is been restricted.Some are user specific example specific business area are assigned to only some users ...so you need to add your user ID to those variable.

Similar Messages

Windows Vista Bonjour error "You do not have sufficient access..."

My Windows Vista laptop recognizes my HP PSC 1310 printer connected as a USB printer with Airport Extreme. It even has the correct driver. When i go to finish set up i get an error "You do not have sufficient access to your computer to connect to the selected printer". I am doing this as an admin on my PC. The printer works correctly on my Macbook. The guidance given by apple is no help at all. Any ideas?

I experienced the same general problem and did find a manual workaround in my particular instance. Hopefully this is helpful to anyone who's facing the same situation.
MY SETUP: installing a hp LaserJet 1012 that's tethered to a wireless Time Capsule (home network) on a virtual VISTA platform running within Parallels 4.0.3810 on an iMac OS 10.5.6.
THE PROBLEM: WinXP (also virtual) connected to the printer through BONJOUR FOR WINDOWS without any problems. However, doing the same in Vista resulted in a last step termination of installation with the following message from Vista: "You do not have sufficient access to your computer to connect to the selected printer." Lovely.
Turns out, according to Microsoft (link: support.microsoft.com/kb/946394/en-us Help and Support Article ID: 946394 - Last Review: January 24, 2008), the problems is due to "the Hewlett-Packard (HP) print driver uses an HPBmini.dll file ("HP Mini Installer") whose version is earlier than 1.0.0.13."
My workaround was to simply install the network printer manually via ~ (the following are the choices that I clicked on in VISTA)
Vista Control Panel > Hardware and Sound > Printers > Add a printer >
Add a network, wireless or Bluetooth printer >
The printer that I want isn't listed >
Add a printer using a TCP/IP address or hostname >
CHOOSE - Device type: Autodetect
INPUT - Hostname or IP address: "Time-Capsule"
(which is the specific hostname in my case, the hostname can be found by going to OS X System Preference > Print & Fax > click & highlight the printer installed on the local network in OS X and look for the hostname after "Location:". Remember, Windows do not do spaces, so if there are any spaces in your hostname be sure to substitute a dash "-".
SELECT - "Query the printer and automatically select the driver to use" >
Device Type > Standard | Generic Network Card > Install the printer driver* >
(*Here's the tricky step, since you don't want to use an old driver which would bring up that old insufficient access message, but you do have some options:
a) you have a known VISTA COMPATIBLE driver from the manufacturer (net downld);
b) the "Add Printer Wizard" window may contain a driver for your specific printer or a similar printer. Also, try the "Windows Update" button to refresh the choices if you can't find it the first time; and finally,
c)"Generic" is a legitimate choice in the Manufacturer window if you can't find any better options.)
From there, it's just Next > Next > and choose to share printer, etc. to finish up.
Luckily, I got through to "Print a test page" and it all works without the annoying "insufficient access" message.
Best of luck to you.

Essbase add-in error:You do not have sufficient access to perform a lock

Hi,
I have a user who is doing a retrieve in Excel and is getting this error on v.9.3.1:
Essbase Error: "You do not have sufficient access to perform a lock and send on this database".
The user is just doing a retrieve, no lock and send.
I asked him to disable 'update mode' in add-in options (Mode tab) on each of his sheets.
But when he open a new sheet/document Excel 2007, the 'update mode' is enabled by default.
Where can we change that ? Is there a command to put in a .ini file?
I check all the threads but there no answer on how to change this default setting.
Thanks for your help,
Marie.

Hi Raja,
Check this out../
Weird problem regarding Essbase Excel plug in
It might help
Regards
Amarnath

Essbase error:You do not have sufficient access to perform a lock on this..

Hi all,
I tried to retrieve the members in the spreadsheet addin client and I am getting the error as follows:
Essbase error: You do not have sufficient access to perform a lock on this database.
But Iam trying to do only a retrieve operation. Essbase version is 9.3.0.1.02 and OS is windows XP.
Also under Essbase->options->Mode tab, the check box update mode was unchecked.
I was able to do the operation before without any error and suddenly Iam facing this issue.
Can anyone help me on the above
Thanks in advance,
Raja

Hi Raja,
Check this out../
Weird problem regarding Essbase Excel plug in
It might help
Regards
Amarnath

Error: You do not have sufficient access to perform a lock on this database

Hi,
Can anyone help on this.
When user try to load data through Excel it throws the following error "You do not have sufficient access to perform a lock on this database"
We are using Essbase 6.5.
We have tried following options
FIX1:
In Microsoft Excel, under ESSBASE -> OPTIONS, under the MODE tab, the check box UPDATE MODE is checked.
When the UPDATE MODE check box is selected retrievals will automatically lock the corresponding database area with each retrieval. Disable Update Mode to stop locking blocks automatically. In update mode, the Send command (which updates the server with data values from the spreadsheet) does not automatically unlock data after the send.
1. Launch Microsoft Excel
2. Select ESSBASE -> OPTIONS
3. Select the MODE tab
4. Uncheck "Update Mode" to return to normal mode
This error is seen when trying to lock and send data via the Hyperion Essbase Spreadsheet Add-in into that fall within a replicated target partition definition
1. Go to HYPERION APPLICATION MANAGER -> DATABASE -> PARTITIONMANAGER
2. Select the relevant partition
3. Select EDIT
4. On the CONNECT TAB, select SETTINGS and tick the option THETARGET PARTITION CAN BE UPDATED
Also gave write access to that user.
Can anyone give another possible solutions.
With thanks,
babu

Hi Raja,
Check this out../
Weird problem regarding Essbase Excel plug in
It might help
Regards
Amarnath

Bonjour for windows gives this error - You do not have sufficient access...

I installed Bonjour for windows on a PC running XP. When I run the Bonjour app from windows I can see the printer I wish to connect to. It is shared off of my G3 server. When I try to connect I get the following error,
"You do not have sufficient access to your computer to connect to the selected printer"
I have done some research through Apple's info database and found,
http://docs.info.apple.com/article.html?artnum=302408
I followed the instructions and still I get the same error. I have rebooted the PC deleted all the printers under the printer window. But no luck. I found a similar request by another apple forum user. His issue was the same but he was using 'Parallels' emulator. But no solution was provided.
Any suggestions?

Well this is what I've done to date to try to resolve this issue.
I uninstalled Bonjour for Windows from my PC. I checked Apples support pages dealing with Bonjour for Windows (BfW). As suggested I deleted all printers in my printer window, (to delete all possible print Queues). I updated my Windows to the latest patch for XP. I reinstalled BfW, with the XP Firewall turned on. It is suggested that BfW will make the necessary changes to the XP firewall to allow traffic going through port 5353. I have tried more than one printer off of my G3 and I double checked my external router port restrictions, and I turned off the firewall on my G3, shared mt printers in OS X, and even turned on windows file sharing. I even updated my G3 to 10.4.8
I pinged my G3 from my XP machine it's there. Also I can see the G3 with it's printers when I browse the network from the XP box. Also I'm on the same local subnet 192.168.2.x
The only thing I have not done yet is see if it is possible to ping a bonjour host (my G3) from a bonjour client (XP box). That would at least verifiy the 5353ports.
Anyone have a bonjour utility to do that? Probably have to run in a Windows enviroment. Or can a ping packet be directed to use a particular port?

On windows 7 I receive this error while installing error: "You do not have sufficient privileges to

error: "You do not have sufficient privileges to perform the requested action."
The resolution on the other thread did not work for me. What could be wrong? I have installed Adobe Flash Media Live before without an issue but after I reformatted my PC I keep receiving this. Thanks in advance.

I've solved it,
Change the permissions on the file (sudo chmod 755 httpd.conf)
then
sudo nano httpd.conf
and it works fine
thanks alot for your help

Dashboard Designer Error - You do not have sufficient permissions to complete the request.

Hi all
I have created a PerformancePoint Data Source library and a PerformancePoint Reports list on a SharePoint site. The PerformancePoint site collection and site features are also both activated. The data source library is in
the 'trusted data soruces' list in administration. Existing reports I have created show OK on the site.
When user, who has full control of the entire site, clicks "add a new item" in the BI Reports list, SharePoint launches Dashboard Designer OK.
The problem is when Dashboard Designer loads, it does not load the existing data sources & reports. Clicking on the refresh icon results in the error:
You do not have sufficient permissions to complete the request.
If I add this user to the Site Collection Administrators list, the user can refresh and view the data sources & reports OK. Is this a requirement to create reports in Dashboard Designer? It is not acceptable to set all
our report designer users as the site collection administrator.
Cheers
Tyson

Hi,
Have you also tried to assign rights using the technique mentioned in the above given document (i.e. using Dashboard Designer):
Important To assign or change user permissions for dashboard items, you must have
Full Control permissions. Although you can create and publish dashboard items with
Design permissions, you cannot assign or change permissions for dashboard items unless you also have
Full Control (Site) or Site Collection Administrator permissions.
Use the SharePoint Permissions dialog box to assign or change user permissions for a dashboard item. You can open the
SharePoint Permissions dialog box from Dashboard Designer or from the SharePoint list or document library that contains the dashboard item. The following sections describe both methods.
Edit user permissions in Dashboard Designer
In the Workspace Browser, click PerformancePoint Content or
Data Connections, depending on the item that you want to modify. Then, in the center pane, double-click the dashboard item to open it for editing.
In the ribbon, click the Home tab, locate the Item group, and then click
Permissions. A browser window opens, which enables you to view or change the SharePoint permissions for the dashboard item that you opened.
Use the SharePoint permissions dialog box to modify the user permissions for your dashboard item, and then save your changes.
Edit user permissions in a SharePoint list or document library
Locate the dashboard item that you want to modify in its SharePoint list or document library.
Select the check box that is next to the name of the dashboard item. At first glance, you might not see a check box next to your dashboard item. The check box is visible when you put your cursor next to the
Title column, which is located next to the name of the dashboard item. The ribbon appears in the SharePoint site.
In the SharePoint ribbon, click List Tools, and then click
Items. Locate the Manage section, and then click
Document Permissions. A SharePoint Permissions dialog box opens. This enables you to view and change the user permissions for the item that you selected.
Use the SharePoint Permissions dialog box to modify user permissions for your dashboard item, and then save your changes.
Please tell us if this approach shows different permissions assigned and solves your problem.
Thanks and best regards,
Martin
Martin W. Angler, MCTS
Blog angler.wordpress.com
Twitter: Follow me on twitter

I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.

I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation. Try to export to an external HD attached, all help would be gratefully received

Have you ever successfully saved anything to that external drive? My first two thoughts are that the drive isn't formatted for the Mac or that you don't have rights to save to the drive.

Authorization Issues: Message EYE007: You do not have sufficient authoriza

Hi all,
We are facing issue regarding authorization. Details are -
We have info object Region (which has values like NORTH, SOUTH, EAST, WEST and CENTRAL).
Steps:
1. I made Region as Authorization Relevant.
2. Created Variable on Region and Processing type as Authorization (Multiple Single Values, Optional)
3. As per user's role we have created 5 Authorization analysis objects with respective to Region values.
If one user has access rights for north then, will assign North Role in BI. Similarly for others aslo it is working fine.
But, If I assign North and South Role for one particular User then it is giving error.
Error Message:
All Authorizations Tested
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
1478 ( ZDISTRICT )
1488 ( ZREGION )
Authorization Check Complete
Please help me.
Regards,

Hi,
If ZDISTRICT & ZREGION are not included in your selection you will get an authorization error. To avoid this error maintain value as : (Colon) in RSECADMIN for these objects.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b1/0c9441b8972e7be10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/932b839c8019ade10000000a11466f/content.htm
hope it helps...
regards,
Raju

Error: "You do not have sufficient access privileges"

I consistently receive the error message "You do not have sufficient access privileges" when attempting to rename certain files or folders in OS 10.5.2. The output of
ls -le ./
is (edited for privacy):
total 12200
drwx------+ 7 myusername myusername 238 Apr 19 22:17 Desktop
0: group:everyone deny delete
drwx------+ 10 myusername myusername 340 Apr 6 01:04 Documents
0: group:everyone deny delete
drwx------+ 5 myusername myusername 170 Apr 19 22:35 Downloads
0: group:everyone deny delete
-rwxr-xr-x+ 1 myusername myusername 99312 Sep 3 2007 Image-57E66CC6A02011D9.jpg
0: group:everyone deny delete
drwx------+ 55 myusername myusername 1870 Apr 19 23:02 Library
0: group:everyone deny delete
drwx------+ 10 myusername myusername 340 Apr 5 17:26 Movies
0: group:everyone deny delete
drwx------+ 211 myusername myusername 7174 Apr 19 19:01 Music
0: group:everyone deny delete
drwx------+ 725 myusername myusername 24650 Apr 14 19:14 Pictures
0: group:everyone deny delete
drwxr-xr-x+ 5 myusername myusername 170 Dec 24 22:38 Public
0: group:everyone deny delete
drwxr-xr-x+ 4 myusername myusername 136 Dec 24 23:53 Sites
0: group:everyone deny delete
drwxrwxrwx+ 4 myusername myusername 136 Dec 24 23:45 Templates
0: group:everyone deny delete
drwx------+ 20 myusername myusername 680 Dec 24 23:03 Travel
0: group:everyone deny delete
drwx------+ 6 myusername myusername 204 Dec 24 23:25 Writing
0: group:everyone deny delete
lrwxr-xr-x 1 myusername myusername 44 Dec 31 13:15 webroot computer1 -> /Volumes/computer1/Library/WebServer/Documents
lrwxr-xr-x 1 myusername myusername 28 Dec 31 13:15 webroot computer2 -> /Library/WebServer/Documents
Attempting to rename, for example, Image-57E66CC6A02011D9.jpg at the root of my home folder produces the error message "You do not have sufficient access privileges".
I tried repairing permissions with Disk Utility -- it completed successfully, but the problem remains.
I tried restarting with the Leopard Install DVD and doing the Reset Password > reset ACLs thing for all user accounts on the computer but the problem remains.
When I execute
sudo chmod -R +a "everyone deny delete" ~/
chmod responds with "Operation not permitted" on hundreds of files. For example:
chmod: Failed to set ACL on file 'Application Data': Operation not permitted
When I next execute
sudo chmod -R -a "everyone deny delete" ~/
chmod responds with
chmod: No ACL present
When I execute
sudo chown -R `id -u`:`id -g` /Users/`id -un`
chown responds with "Operation not permitted" on hundreds of files. For example:
chown: /Users/myusername/Music/b/Beck/1993 Loser (CD Single)/05 - Fume - Beck - 1993 Loser (CD Single).mp3: Operation not permitted
iMac is new in December 2007 and I used Migration Assistant to migrate files from a Mac Mini running 10.4. The iMac with the permissions problem also received files from an NTFS filesystem (Windows XP SP2).
Any suggestions? Thanks!
Message was edited by: user9287432

Thanks, Scott. I executed
sudo chflags -R nouchg ~/
and
sudo chown -R myusername:staff ~/
(replacing myusername with my user name)
and in each case there was a delay of a number of seconds and then the command prompt returned -- no errors. However, my renaming problem still exists.
Just fyi, I got
sudo chown -R `id -u`:`id -g` /Users/`id -un`
from the thread at
http://discussions.apple.com/thread.jspa?messageID=6963994
or
http://tinyurl.com/56xrz8
The list of commands in petrock's post of Feb 1, 2008 12:11 AM ("Re: if you have problems with ACL") did not work for me. I think they made things worse because now I'm being prompted to enter my password when doing simple things like deleting files when before it hadn't. I think this is because the list of commands did not all complete successfully -- it's not clear what to do if you encounter "operation not permitted" or "no ACL present".
And, I don't know if this is relevant, but before this I resolved some permissions problems in this thread:
http://discussions.apple.com/message.jspa?messageID=6634641#6634641
or
http://tinyurl.com/57vls4
Does it appear that Hal Itosis' homeACLtool script at
http://www.macfixitforums.com/showflat.php?Cat=&Board=Forum38&Number=849901
or
http://tinyurl.com/5daza8
might help me, or should I try something else?

Oracle Instalation error (You do not have sufficient permissions to access)

Hi
my enviroment is SAP ECC6/Oracle 10g/ SUN Solaris 10 SPARC
I'm installing SAP but run into the error below. I don't understand why the inventory file is pointing to /home/prodora which does not exist. this directory is owned by root and ownership cannot be changed to user oraq11.
Is it possible to change the location of the inventory ?
kindly assist
regards
simbatech:oraq11> ./RUNINSTALLER
oracle_stage is not set (OK)
oracle_base is not set (OK)
oracle_home is not set (OK)
oracle_sid is not set (OK)
oracle_home_name is not set (OK)
oracle_inst_group is not set (OK)
from_location is not set (OK)
tmp_netca_file is not set (OK)
tmp_dbca_file is not set (OK)
Working in /oracle/stage/102_64/database/SAP ...
Oracle SID:            Q11
Oracle Home:           /oracle/Q11/102_64
Oracle Home Name:      Q11_102_64
Oracle Install Group: dba
Installing from:       /oracle/stage/102_64/database/stage/products.xml
oracle_stage="/oracle/stage/102_64"
oracle_base="/oracle/Q11"
oracle_version="102_64"
oracle_home="/oracle/Q11/102_64"
oracle_sid="Q11"
oracle_home_name="Q11_102_64"
oracle_inst_group="dba"
from_location="/oracle/stage/102_64/database/stage/products.xml"
tmp_netca_file="/tmp/.orainst_netca.15383"
tmp_dbca_file="/tmp/.orainst_dbca.15383"
ORACLE_BASE="/oracle/Q11"
ORACLE_HOME="/oracle/Q11/102_64"
================================
Preparing response files. Please wait:
======================================
Working on /oracle/stage/102_64/database/SAP/SVRCUSTOM.RSP
/oracle/stage/102_64/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.15383: Done
You do not have sufficient permissions to access the inventory +'/home/prodora/oraInventory'.+ Installation cannot continue. Make sure that you have read/write permissions to the inventory directory and restart the installer.: No such file or directory
simbatech:oraq11>

Hi,
Yes, Solution describe in 350251 - Creating a New or 2nd Oracle SID with runInstaller
"THE SOLUTION"
The good news is the solution is very simple and takes a few seconds
First cd /var/opt/oracle
You will find a file called oraInst.loc # cat oraInst.loc
inventory_loc=/oracle/PR1/oraInventory
inst_group=dba
Use vi or emacs to edit the file and change the inventory_loc to the directory of the oracle instance you are currently installing. ie inventory_loc=/oracle/PR2/oraInventory
Restart your oracle installer eg. su - orapr2
cd /oracle/stage/816_64
setenv DISPLAY localhost:0.0
./runInstaller
Regards;

ERROR: You do not have sufficient privileges to complete this installation

When attempting to install iTunes 9.0.1, I receive this message just after the installation begins: You do not have sufficient privileges to complete this installation for all users on this machine. Log on as an administrator and then retry this installation."
I am the administrator of this machine. I have tried installing in a different directory of the all users folder, however that failed with the same reason. This PC has had some anomalies of late so this may not be iTunes, but I'm without clues as to where to go to fix this.
Thanks for any clever ideas you may have. I miss the music.
Gina

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

ASDM error - you do not have sufficient privileges to execute commands required to load asdm

I am getting below error to log in via ASDM for ASA firewall.
Please help.

Hello Gurujaj,
You are running AAA on your network and you are running authorization,
The user you are using does not have the command authorization set to load the ASDM,
The ones need it are:
Commands required to log ASDM
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command blocks
Regards,
Julio Carvajal

Error: You do not have sufficient privileges to perform this operation.

I dun know is it appropraite to bounce this question in this forum or
not,nevertheless i am asking cuz i dun know where to ask dis silly question.
I wana view this link it asks me OTN member user and password ,after
putting the username and password the aforesaid error is displaying ,from where
can i get such privileges for this link.
http://www.oracle.com/gateways/gateway_bundles/faq.htmlKhurram

This is certainly not the appropriate foruma as it is not monitored by Oracle staff
Try the Feedback forum
Community Feedback (No Product Questions)

Planning Sequence error - You do not have sufficient authorization

Similar Messages

Maybe you are looking for