Planning Service Start Failure

We were able to install and configure Workspace/Shared Services, Essbase, Planning, Financial Reporting, and OHS in our new 11.1.2.5 environment, all running on Red Hat Linux 5.8. However, when we try to start the planning service, it gets stuck in an "Admin" state and we cannot connect to it. Any troubleshooting tips are greatly appreciated.
Thank you in advance.

I take it you mean 11.1.2.3, what are the errors in the starter and domain log for planning?
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Load plan not starting from point of failure in obia 11

hi,
I am using obia 11..1.1.7 & once load plan is started. few session are failed due to duplicates. After removal of duplicates, once i start load plan from configuration manager. It is starting again from start not from point of failure. I tried restarting load plan from ODI studio also from load plan & scanarios too but it again started from start not from point of failure.
Can someone explain how to use ODI start from point of failure feature in OBIA.
Thanks,
Paresh

JamesW wrote:
That's exactly that. Shutdown the database. make the correction in the PFILE, started the DB using the PFILE and then created a new SPFILE .. Restarted the DB (using the SPFILE), restated the upgraded assist.. its not at 9% and running
Pesky Oracle Thanks guys for your help
FWIW, and for your future understanding, you didn't actually have to *start* the database with the pfile in order to create the spfile.
In this example, I don't even have a database named fubar ...
oracle:fubar$ pwd
/u01/app/oracle/product/11.2.0/db_1/dbs
2013-08-15 10:52:29
oracle:fubar$ ls -l init*
-rw-r--r-- 1 oracle oinstall 2851 May 15 2009 init.ora
-rw-r----- 1 oracle oinstall 35 Jan 31 2013 initorcl.ora
2013-08-15 10:52:36
oracle:fubar$ ls -l spfile*
-rw-r----- 1 oracle asmadmin 2560 Aug 15 10:47 spfilekilroy.ora
2013-08-15 10:52:39
oracle:fubar$ export ORACLE_SID=fubar
2013-08-15 10:52:48
oracle:fubar$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Aug 15 10:52:53 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> create spfile from pfile='init.ora';
File created.
SQL> exit
Disconnected
2013-08-15 10:53:05
oracle:fubar$ ls -l spfile*
-rw-r----- 1 oracle asmadmin 1536 Aug 15 10:53 spfilefubar.ora
-rw-r----- 1 oracle asmadmin 2560 Aug 15 10:47 spfilekilroy.ora
2013-08-15 10:53:07
oracle:fubar$

Planning services shut down automatically

Hi Guys,
We are trying to get this particular service started “./startHyperionPlanning.sh“ and currently the client is using Weblogic 9.2 mp3.Eevrything was running fine and since last week we have been facing this issue.We thought that there could be a problemw ith the admin account records being corrupted in HSP_user & as oracle suggested we went and deleted the object_id for the admin account it worked for like a day and then since then it keeps abruptly shutting down and we have to start it manually …Throws the following error down below
JAVA Memory arguments: -Xms512m -Xmx1024m -Xss1024k
WLS Start Mode=Production
CLASSPATH=/app/oracle/hyperion/common/CLS/9.5.0.0/lib/cls-9_5_0.jar:/app/oracle/hyperion/common/config/9.5.0.0/lib/hit-config.jar:/app/oracle/hyperion/common/config/9.5.0.0/lib/hit-common.jar:/app/oracle/hyperion/common/SAP/lib:::/app/oracle/bea/patch_weblogic923/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app/oracle/bea/jrockit_150_12/lib/tools.jar:/app/oracle/bea/weblogic92/server/lib/weblogic_sp.jar:/app/oracle/bea/weblogic92/server/lib/weblogic.jar:/app/oracle/bea/weblogic92/server/lib/webservices.jar::/app/oracle/bea/weblogic92/common/eval/pointbase/lib/pbclient51.jar:/app/oracle/bea/weblogic92/server/lib/xqrl.jar::
PATH=/app/oracle/bea/weblogic92/server/bin:/app/oracle/bea/jrockit_150_12/jre/bin:/app/oracle/bea/jrockit_150_12/bin:/usr/kerberos/bin:/usr/java/j2sdk/bin:/usr/java/j2re/jre/bin:/usr/local/bin:/bin:/usr/bin:/home/oraas13/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.5.0_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04)
BEA JRockit(R) (build R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-linux-ia32, compiled mode)
Starting WLS with line:
/app/oracle/bea/jrockit_150_12/bin/java -jrockit -Xms512m -Xmx1024m -Xss1024k -DComponentName=HyperionPlanning -DcomponentId=203443c9f0b7ed1963235fde123a074cd4d7eba -Dsun.net.inetaddr.ttl=0 -DHYPERION_HOME=/app/oracle/hyperion -Dhyperion.home=/app/oracle/hyperion -Dweblogic.j2ee.application.tmpDir=/app/oracle/hyperion/deployments/temp -Dweblogic.security.SSL.trustedCAKeyStore=/app/oracle/bea/weblogic92/server/lib/cacerts -DComponentName=HyperionPlanning -DcomponentId=203443c9f0b7ed1963235fde123a074cd4d7eba -Dsun.net.inetaddr.ttl=0 -DHYPERION_HOME=/app/oracle/hyperion -Dhyperion.home=/app/oracle/hyperion -Dweblogic.j2ee.application.tmpDir=/app/oracle/hyperion/deployments/temp -da -Dplatform.home=/app/oracle/bea/weblogic92 -Dwls.home=/app/oracle/bea/weblogic92/server -Dwli.home=/app/oracle/bea/weblogic92/integration -Dweblogic.management.discover=false -Dweblogic.management.server=http://localhost:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/app/oracle/bea/patch_weblogic923/profiles/default/sysext_manifest_classpath -Dweblogic.Name=HyperionPlanning -Djava.security.policy=/app/oracle/bea/weblogic92/server/lib/weblogic.policy weblogic.Server
<Mar 2, 2010 5:26:16 PM EST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
/app/oracle/bea/weblogic92/platform/lib/p13n/p13n-schemas.jar:/app/oracle/bea/weblogic92/platform/lib/p13n/p13n_common.jar:/app/oracle/bea/weblogic92/platform/lib/p13n/p13n_system.jar:/app/oracle/bea/weblogic92/platform/lib/wlp/netuix_common.jar:/app/oracle/bea/weblogic92/platform/lib/wlp/netuix_schemas.jar:/app/oracle/bea/weblogic92/platform/lib/wlp/netuix_system.jar:/app/oracle/bea/weblogic92/platform/lib/wlp/wsrp-common.jar>
<Mar 2, 2010 5:26:17 PM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-linux-ia32 from BEA Systems, Inc.>
<Mar 2, 2010 5:26:18 PM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 MP3 Mon Mar 10 08:28:41 EDT 2008 1096261 >
<Mar 2, 2010 5:26:19 PM EST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /app/oracle/bea/license.bea>
<Mar 2, 2010 5:26:19 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Mar 2, 2010 5:26:19 PM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Mar 2, 2010 5:26:20 PM EST> <Notice> <Log Management> <BEA-170019> <The server log file /app/oracle/hyperion/deployments/WebLogic9/servers/HyperionPlanning/logs/HyperionPlanning.log is opened. All server side log events will be written to this file.>
<Mar 2, 2010 5:26:22 PM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Mar 2, 2010 5:26:24 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Mar 2, 2010 5:26:24 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
[INFO] RegistryLogger - REGISTRY LOG INITIALIZED
[INFO] RegistryLogger - REGISTRY LOG INITIALIZED
/app/oracle/hyperion/common/config/9.5.0.0/product/planning/9.5.0.0/planning_1.xml
displayName = Planning
componentTypes =
priority = 50
version = 9.5.0.0
build = 1
location = /app/oracle/hyperion/products/Planning
taskSequence =
task =
*******/app/oracle/hyperion/common/config/9.5.0.0/registry.properties
Creating rebind thread to RMI
<Mar 2, 2010 5:26:27 PM EST> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster successfully. Log messages will now be broadcasted to the domain log.>
<Mar 2, 2010 5:26:27 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Mar 2, 2010 5:26:27 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Mar 2, 2010 5:26:27 PM EST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 111.168.16.111:8300 for protocols iiop, t3, ldap, http.>
<Mar 2, 2010 5:26:27 PM EST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:8300 for protocols iiop, t3, ldap, http.>
<Mar 2, 2010 5:26:27 PM EST> <Warning> <Server> <BEA-002611> <Hostname "localhost.localdomain", maps to multiple IP addresses: 111.168.16.111, 127.0.0.1>
<Mar 2, 2010 5:26:27 PM EST> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "HyperionPlanning" for domain "WebLogic9" running in Production Mode>
<Mar 2, 2010 5:26:27 PM EST> <Warning> <Server> <BEA-002611> <Hostname "linux50.xxx.com", maps to multiple IP addresses: 111.168.16.111, 127.0.0.1>
<Mar 2, 2010 5:26:27 PM EST> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster successfully. Log messages will now be broadcasted to the domain log.>
<Mar 2, 2010 5:26:28 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Mar 2, 2010 5:26:28 PM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
using Java property for Hyperion Home /app/oracle/hyperion
Setting Arbor path to: /app/oracle/hyperion/common/EssbaseRTC/9.5.0.0
Setting HBR Mode to: 2
=2010-03-02 17:27:02,522 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
d{ISO8601} WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
Embedded HBR initialized.
Reaquired task list lease: Tue Mar 02 17:27:02 EST 2010: 1267568822784
d{ISO8601} INFO [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.audit.client.runtime.AuditRuntime - Audit Client has been created for the server http://linux50.xxx.com:28080/interop/Audit
d{ISO8601} INFO pinging com.hyperion.audit.client.cache.AuditConfigFilter - Client Enable Status true
d{ISO8601} INFO filterConfig com.hyperion.audit.client.cache.AuditConfigFilter - Client Enable Status true
[Tue Mar 02 17:27:27 EST 2010] Planning successfully notified HBR repository.
Exception in thread "Thread-26" Exception in thread "RMI ConnectionExpiration-[111.168.16.111:40272]" Exception in thread "Timer-1" Exception in thread "[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" Exception in thread "RMI ConnectionExpiration-[111.168.16.111:11333]" Exception in thread "Thread-13" java/lang/OutOfMemoryError:
--- End of stack trace
java/lang/OutOfMemoryError:
--- End of stack trace
Exception in thread "weblogic.timers.TimerThread" Exception in thread "filterConfig" java/lang/OutOfMemoryError:
--- End of stack trace
Exception in thread "Timer-2" Exception in thread "Timer-4" Exception in thread "ExecuteThread: '7' for queue: 'weblogic.socket.Muxer'" Exception in thread "DoSManager" Exception in thread "RMI LeaseChecker" Exception in thread "weblogic.time.TimeEventGenerator" [WARN ] Exception occured in registered Java signal handler:
Exception in thread "(Signal Handler)"
Exception in thread "GC Daemon" Exception in thread "Timer-5" Killed
[oraas13@linux50 bin]$ /app/oracle/hyperion/deployments/WebLogic9/bin/startWebLogic.sh: line 184: 25736 Killed ${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS}
Edited by: user9208793 on Mar 4, 2010 2:59 PM
Edited by: user9208793 on Mar 4, 2010 3:01 PM

Guess not, huh.
Seems like such an obvious feature?
C.

Planning on starting career in SAP - Advice

My name is Srikanth and I am from UK. I am planning to start my career in SAP. My background is in Microsoft Tech (VB6, ASP, ASP.Net, C#, VB.Net, SQL Server, Databases, Web services and Portals) .
I have 9yrs of experience in developing legacy systems such as portals for telecoms, foreign exchange, marketing, health care etc.,
I have no prior knowledge of SAP. Reason for choosing is opportunities in SAP seems to be steady all the times.
At the moment I still have a job but I am seriously considering moving my career towards SAP.
With Microsoft Tech background , 9 Yrs of experience in developing portals , applications and no prior knowledge of SAP where do I start or what to choose in SAP ?
Please help or advice.
<removed_by_moderator>
Edited by: Julius Bussche on Apr 8, 2009 11:09 AM

Until now what all I hear from others, not necessarily
 in this forum is one should have strong functional
 background to learn functional modules like
 (HR, FICO, and MM etc)
What you heard is absolutely correct !!!!!!!
I have seen many people jumping into SAP without the respective domain knowledge and suffered a lot in their career.
If you are very particular and interested to concentrate on any modules you listed, what I would suggest is that search a friend who have the domain experience in that field, learn from them all basic process so that you can try in SAP on your own. Straightaway, you cannot learn modules like MM, SD, FICO if you dont have any domain experience. Sorry to say this but since I have seen many friends as like what you had expressed and later suffered a lot, thought of cautioning you.
thanks
G. Lakshmipathi

Issue with Planning service getting crashed Automatically due to dll file

Hello,
I am having an issue with the Hyperion Planning service which is getting crashed and the following is noted in the Eventviewer:
Faulting application name: HyS9Planning.exe, version: 1.0.0.2, time stamp: 0x4d110efc
Faulting module name: jrosal.dll, version: 0.0.0.0, time stamp: 0x4e8c8104
Exception code: 0x40000015
Fault offset: 0x000000000000cb0b
Faulting process id: 0x1960
Faulting application start time: 0x01ce14f7a8434b04
Faulting application path: D:\Oracle\Middleware\user_projects\domains\EPMSystem\bin\HyS9Planning.exe
Faulting module path: D:\Oracle\Middleware\jrockit_160_29\jre\bin\jrosal.dll
Report Id: 967733e6-8152-11e2-9257-5cf3fc335086The following is recorded in the log file:
<Mar 2, 2013 2:45:22 PM CST>
<Error> <HTTP> <BEA-101017> <[ServletContext@271625046[app:PLANNING module:HyperionPlanning path:/HyperionPlanning spec-version:2.5 version:11.1.2.0]]
Root cause of ServletException.
java.lang.OutOfMemoryError: classblock allocation, 11312928 loaded, 11M footprint, in check_alloc (src/jvm/model/classload/classalloc.c:215).
Attempting to allocate 2G bytes
There is insufficient native memory for the Java
Runtime Environment to continue.
Possible reasons:
The system is out of physical RAM or swap space
In 32 bit mode, the process size limit was hit
Possible solutions:
Reduce memory load on the system
Increase physical memory or swap space
Check if swap backing store is full
Use 64 bit Java on a 64 bit OS
Decrease Java heap size (-Xmx/-Xms)
Decrease number of Java threads
Decrease Java thread stack sizes (-Xss)
Disable compressed references (-XXcompressedRefs=false)
 at java.lang.ClassLoader.defineClass1(Native Method)
 at java.lang.ClassLoader.defineClassCond(ClassLoader.java:631)
 at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
 at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
 at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:343)
 Truncated. see log file for complete stacktraceI checked the following forum
Re: Oracle JRockit R28.2.2. OutOfMemoryError: classblock allocation
Should I need to increase -XX:MaxClassBlockMemory to 75M. If so, how should I do it, I am unaware of how I can set the values? My Planning server has 136GB Ram and 18 Cores.
Thanks,
hyperionEPM

The issue was related to the heap size being too much and as a result the Class block memory was not getting enough memory. I think we can make a use of -XXCompressedRefs:32 parameter in the Java start up to allow the heap size to increase till 32 Gb.

Leaving one Family Plan to start a new one?

Here is my situation:
I am currently in a Family Plan with my parents and brother. I am eligible for my 20-month upgrade this month and plan on upgrading to an iPhone. My fiancee currently has an iPhone with AT&T and her contract is up next July, at which point she would like to switch to Verizon and get on a new Family Plan with me (just the two of us). It is important that we both keep our current phone numbers through all of this.
My question is: if I upgrade now and stay on my parents' Family Plan, will I incur any additional fees for leaving that Family Plan next July and starting a new Family Plan with my fiancee? Is doing this even possible?
Or would the better route be to leave my parents' Family Plan now, starting my own single-line plan, and then next July changing my single-line plan to a Family Plan and adding my fiancee?
I hope this makes sense... I have searched the message boards and support pages and can't seem to find answers to my questions, or anyone else with the same situation.
Thanks,
Dave

dcm229 wrote:
Here is my situation:
I am currently in a Family Plan with my parents and brother. I am eligible for my 20-month upgrade this month and plan on upgrading to an iPhone. My fiancee currently has an iPhone with AT&T and her contract is up next July, at which point she would like to switch to Verizon and get on a new Family Plan with me (just the two of us). It is important that we both keep our current phone numbers through all of this.
My question is: if I upgrade now and stay on my parents' Family Plan, will I incur any additional fees for leaving that Family Plan next July and starting a new Family Plan with my fiancee? Is doing this even possible?
you should not have any fees, but depending on your credit a deposit may be required
Or would the better route be to leave my parents' Family Plan now, starting my own single-line plan, and then next July changing my single-line plan to a Family Plan and adding my fiancee?
its up to you, fianancially speaking, see comments below
I hope this makes sense... I have searched the message boards and support pages and can't seem to find answers to my questions, or anyone else with the same situation.
Thanks,
Dave
in order to keep your number and start your own single line plan you would do an assumption of liability (AOL).
the phone number and contract would become yours.
what can happen, is since the phone is currently in one name nad going to another name you lose your warranty.
so it may be better to do it before you upgrade.

Apple mobile device service started and stopped

my iPod touch cant be synced or even recognized on my iTunes and it says i gotta *start the apple mobile device service*.
i finally found it and it tells me that *"apple mobile device service started and stopped..."*
how can i fix it?
help!!!!

Hello and Welcome to Apple Discussions.
Follow the instructions in this article:
http://docs.info.apple.com/article.html?artnum=307078
mrtotes

Did you have Cloud start failures or a missing health monitor?

Calling all CQ Cloud'ers.
Hi, My name is Gary Gilchrist. I work with the engineering team for Adobe CQ Cloud.
Today I was running some diagnostics on our site. I see that there are a lot of you out there who have got as far as starting your own CQ Cloud. Congratulations!
But I also see a number of Clouds that have been attempted to be started by different tenants (that's you :)) and never made it as far as the "running" state. There are sometimes good reasons for this, sometimes related to configuration of your Amazon AWS key information. But we're still in Beta and I must admit, we know of a few bugs we still need to iron out.
I also see that some Clouds were started successfully, yet I do not see the automatic health monitoring that we record for your Cloud. We do that after a Cloud starts so that you can see the CPU, Memory and Disk health of your CQ instances running in your Cloud. You should see this as little green bars in your Cloud detail page.
I have two questions:
Did you attempt to start a Cloud (and you believe your AWS credential is valid) yet it failed to completely start up?
Did you start a Cloud successfully, yet you continued to see "unavailable" (gray bar) as the heath status for ALL the CQ instances in your Cloud? (please note that health monitoring for the Dispatcher is not working. It will fixed with our next update to the site, coming shortly).
If you did encounter 1 or 2 above please drop a reply on this thread giving only the name of your Cloud (no other personal information necessary) plus anything else you think is useful. We would like to look into it.
Thanks from the whole team here at Adobe for trying out CQ Cloud!
Gary.

1. Cloud start failure, cloud name: cf
I attached more details about the failure in thread Unable to start the cloud

Service entry sheet creation for planned services

Hi,
I have created a service purchase order with planned services. After this I am trying to create a service entry. During ML81N, I give the P.O number and then click on create service entry.
However, to adopt the services from the purchases, there is a service selection tab which takes the user to the services tab of the purchase order and then the user must select the relevant service and click on the adopt button to bring the service into service entry sheet screen.
However, in my case, the service selection tab is not appearing on the service entry screen. Hence I am not able to call the services from the purchase order. I am on ECC 6.0 version.
Am I missing some step in config or in procedure ?
Kindly advice.
Regards,
Rajeev

Hi,
This doesn't sound like a config problem.
If the services are on the PO then you should be able to select the option to choose them from the PO services.
A remote (very remote) possibility is that you may have an authorisation problem, stopping you from being able to use the PO details? Is this possible? do you have authorisation to change this PO via ME22N etc:?
Steve B

Service start/stop

I am trying out service start/stop between different JVMs but am not seeing what I expected. I have attached a quickly written test program to try out a scenario.
1. Run the attached program (java Test -Dtangosol.coherence.cacheconfig=servicetest.xml) in 2 JVMs. Let's call them JVM1 and JVM2.
2. At the JVM1 command prompt, type: startservice
3. At the JVM1 command prompt, type: startcache
4. At the JVM1 command prompt, type "i" six times. This should insert 6 items into the cache.
5. At the JVM1 command prompt, type "c". Following is what is displayed:
key=4, value=4
key=3, value=3
key=2, value=2
key=1, value=1
key=5, value=5
key=6, value=6
6. At the JVM2 command prompt, type: startservice
7. At the JVM2 command prompt, type: startcache
8. At the JVM2 command prompt, type "c". The six cache items are displayed.
9. At the JVM1 command prompt, type "stopservice". The expectation is that the service on JVM1 is stopped and the cache items on JVM1 are transferred to JVM2.
10. At the JVM2 command prompt, type "c". The following is displayed:
key=4, value=4
key=3, value=3
key=1, value=1
key=6, value=6
Cache items 2 and 5 have disappeared. Why?
Thanks
Ghanshyam Attachment: Test.java (*To use this attachment you will need to rename 508.bin to Test.java after the download is complete.) Attachment: Test.class (*To use this attachment you will need to rename 509.bin to Test.class after the download is complete.) Attachment: servicetest.xml (*To use this attachment you will need to rename 510.bin to servicetest.xml after the download is complete.)

Following is javadoc for the Controllable.shutdown( ) method:
Stop the controllable service. This is a controlled shut-down, and is preferred to the stop() method.
This method should only be called once per the life cycle of the controllable service. Calling this method for a service that has already stopped has no effect.
I might need to expand and shrink the horizontal span of the cache multiple times without having to shutdown the JVM, which means I might need to shutdown the service multiple times, but the javadoc says I can't call shutdown more than once. Is there a different way to perform an orderly service stop?
Thanks
Ghanshyam

BPMA_ProcessManager service start failed

EPM Version: 11.1.1.1
OS: Windows 2003
Dear all,
BPMA_ProcessManager service start failed, but the EPM System Diagnostic report is success.
Which way I can find the error where it is?
How can I resolve the problem?
Or load service order is wrong?
Thx
Hector

Windows Event viewer detail:
Event Type:     Error
Event Source:     HyS9BPMA_ProcessManager
Event Category:     None
Event ID:     0
Date:          2009-1-16
Time:          15:53:53
User:          N/A
Computer:     ITFARMER-K9EW27
Description:
[892] ERROR Can't find the method:com/hyperion/hss/clients/AuthenticationException: Hyperion.NetJNIBridge.Interface.Exceptions.CASSecurityException
Message: Can't find the method:com/hyperion/hss/clients/Authentication
Source: NetJNIBridge
Server stack trace:
at Hyperion.NetJNIBridge.CASSecurity.GetDataBaseDetails(String& dbType, String& serverName, ValueType& dbPort, String& dbName, String& userName, String& password, String& jdbcUrl)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg, Int32 methodPtr, Boolean fExecuteInContext)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Hyperion.NetJNIBridge.Interface.ICASSecurity.GetDataBaseDetails(String& dbType, String& serverName, ValueType& dbPort, String& dbName, String& userName, String& password, String& jdbcUrl)
at Hyperion.DimensionServer.SessionManager.CasSecurityProvider.GetDataBaseDetails(String& vendor, String& serverName, Int32& dbPort, String& dbName, String& username, String& password, String& jdbcUrl)

Monitor all service Start with the word "SAP"

Hallo
i have sccm 2012
Can monitor services start with the word "SAP"
Instead of monitoring all service set separately .
thanks

Hi,
Did some research and came to the following solution
Open the System Center Operations Manager Console.
Go to Authoring and expand Management Pack Templates
Right Click Windows Service and click Add Monitoring Wizard
On the Monitoring Type page select Windows Service and click Next
Give the Service and store the it in a New Created Management Pack and click Next
On the Service Name Type SAP* on the Target group Select Windows Server Computer Group and click Next
On the Performance Data page click Next
On the Summary page click Create
Export the Management Pack pack you created
In the Management pack replace the following code:
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.Win32ServiceInformationProviderWithClassSnapshotDataMapper">
<ComputerName>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<ServiceName>sap*</ServiceName>
<Frequency>60</Frequency>
With the following code
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.WmiProviderWithClassSnapshotDataMapper">
<NameSpace>root\cimv2</NameSpace>
<Query>select * from win32_service where name like 'sap%'</Query>
<Frequency>60</Frequency>
Second replace
<Value>$Data/Property[@Name='BinaryPathName']$</Value>
With
<Value>$Data/Property[@Name='PathName']$</Value>
Save the management pack and upload it to System Center Operations Manager.
In the Operations Console Click Monitoring
Click Discoverd Inventory and change the target type to the target you created. Then the view should look something like this:
I created the management pack You can download it from here: http://www.ms-opsmgr.eu/wp-content/uploads/Download/2015/SAP/SAP.Services.xml
GReetings Roel Knippen
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Health Service Heartbeat Failure Alert for Generated when one Management Server Down,

Hi,
I have Two Management Server, every one manage about 100 server, when one Management Server goes down unexpected, I receive 100 Alert for 100 Server Health Service Heartbeat Failure.
My Question, why when the Management Server down, it send that all Managed agent Health Service Heartbeat Failure?
Is there a way to change this?

SCOM 2012 agent will autofailover when primary server is down. You can check the failover management server by using the following powershell cmdlet:
#Verify Failover for Agents reporting to MS1
$Agents = Get-SCOMAgent | where {$_.PrimaryManagementServerName -eq 'MS1.DOMAIN.COM'}
$Agents | sort | foreach {
Write-Host "";
"Agent :: " + $_.Name;
"--Primary MS :: " + ($_.GetPrimaryManagementServer()).ComputerName;
$failoverServers = $_.getFailoverManagementServers();
foreach ($managementServer in $failoverServers) {
"--Failover MS :: " + ($managementServer.ComputerName);
Write-Host "";
http://www.systemcentercentral.com/how-does-the-failover-process-work-in-opsmgr-2012-scom-sysctr/

Error in Planning services

Hi when i am trying to accesss the forecast data of campaign related one planning profile i am getting this error.
Error in planning services
Error messages - count 0001:
RFC error: Call of a method or kernel Method that has not been implemented.
Pleas help
Regards,
Ravi

Hi Ravi
hope you have sorted out this problem, i am getting the same error, could you please guide me or share some informaton. i need this as soon as possible
thank you
regards
shankar

Analysis Services started and then stopped, Event ID: 0xC1210000

I just installed SQL Server 2005 Developer Edition and SP1 and SP2. I cannot start Analysis Services. The message box states: The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped.     I looked in the log files located at: C:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Log and found these entries:
msmdsrv.log:
(6/15/2007 10:07:34 AM)
Message: The service cannot be started:
(Source: \\?\C:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Log\msmdsrv.log,
Type: 3, Category: 289, Event ID: 0xC1210000)
(6/15/2007 10:10:26 AM) Message:
The service cannot be started:
(Source: \\?\C:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Log\msmdsrv.log,
Type: 3, Category: 289, Event ID: 0xC1210000)
During installation I did get an unhandled exception (I don't know what component caused the exception). I have found this in the SQLDUMPER_ERRORLOG.log file:
06/14/07 17:39:38, ERROR ,               msmdsrv.exe, Unable to open file C:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\FlightRecorderCurrent.trc, error 2
06/14/07 17:39:38, ACTION,               msmdsrv.exe, Watson Invoke: No
Any ideas how to get this service started?

Does anyone have any idea on this problem? My installation of SQL Server Analysis Services worked fine. I now have the same error as Lucy. This happened after no upgrading of SQLSERVER. It must have issues with security patches on the OS, or maybe service packs for Visual Studio (2005). And no reinstallation of the patch is not the answer (or rebooting).
The service times out and tells me to check the logs. The msmdsrv.log file indicates any unhandled exception -
Message: The service cannot be started: Internal error: An unexpected exception occured. (Source: \\?\C:\Program Files\Microsoft SQL Server\MSSQL.1\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210000)
Message: Service stopped. (Source: \\?\C:\Program Files\Microsoft SQL Server\MSSQL.1\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210001)
Message: (Source: \\?\C:\Program Files\Microsoft SQL Server\MSSQL.1\OLAP\Log\msmdsrv.log, Type: 3, Category: 256, Event ID: 0xC1000016)
I have tried reinstalling, changed users for the service, changes instance names. The logging tells me nothing, except there is a big problem.
I even installed the SQL Server SP2 hoping to fix whatever the problem was. Now I also have SSIS throwing an exception and wanting to attach a debugger to it on top of my original problem. After reading about all of the problems with SQL Server SP2, I think I created a bigger monster. Uninstalling leaves around all kind of files, registry entries, and program numbers.
Thanks for ANY hints to proceed.

Planning Service Start Failure

Similar Messages

Maybe you are looking for