Planning tab is not there in KF properties

Hi,
I created an aggregation level on the top of a real time cube using Modeller and created a query on that.While I was going for input ready optin I am not getting that planning tab in my KF (structural component ) properties.I am using 3.x BEx is it a problem .
If it is not a problem then How .PLs suggest.
Regards,
Swathi
Edited by: d.swathi on May 17, 2010 6:34 PM

Hello Swathi,
integrated planning is only possible with BEx Query Designer 7.x. I is not and will not be available with 3.x tools.
Regards,
Marc
SAP NetWeaver RIG

Similar Messages

I am trying to get itunes radio, but the tab is not there in music tab?

i am trying to get itunes radio, but the tab is not there in music tab?

That feature isn't available in the UK yet.
tt2

MSI Clock Tab not there

I have installed a new FX5600 (MSI) on Win XP Pro. the 'MSI Clock' tab is not showing in display properties. Driver ver: 4403 what have I done wrong?

If you don"t run MSI drivers then you wont have the clock tab but you don't need them, just unlock Coolbits yourself. open Registry Editor
HKEY_LOCAL_MACHINE\Software\NVIDIA Corporation\Global\NVTweak
type new DWORD Coolbits then modify it to 3
thats all there is to do

Reporting Tab is not showing in SCSM 2012 SP1 Console

I'm working with SCSM 2012 SP1. But after installing data ware house only "DataWareHouse" tab appares no "Reporting" tab. And it shows below MSG:
And only the below reporting management pack are available in the Data Ware House >> Management pack area.
I already check data warehouse server 'System Center Data Access Service' and 'SQL Server reporting Service', borth are running. But still 'Reporting' tab is not there.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

At last I solve the problem. THere is 2 solution for resolve the issue.
Force start all warehouse job.
Un register and reregistared DataWareHouse againg.
In my case I do the borth after reregister datawarehouse I wait 1hr after that I manualy start the warehouse jobs. And it works for me.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

I had 9 tabs open on Firefox every day when I start at work. Today, the tabs no longer open. Plus Firefox closed without warning and again the tabs did not re-open.

I have 9 tabs open on Firefox every morning when I start work. Today the tabs are not there. I re-loaded the tabs and about 10 minutes later, Firefox closed without warning. When I went to open Firefox again, the tabs were gone again. I checked the options box under Tools, and the "show my windows and tabs from last time" is already loaded. Please help!
== This happened ==
Just once or twice
== This morning

Make sure that you not run Firefox in [[Private Browsing]] mode.
In Private Browsing mode some menu items are disabled (grayed) and some features like visited links and others are disabled and not working.
You are in Private Browsing mode if you see "Tools > Stop Private Browsing".
See [[Private Browsing]] and http://kb.mozillazine.org/Issues_related_to_Private_Browsing
You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
To see all History settings, choose: Tools > Options > Privacy, choose the setting '''Firefox will: Use custom settings for history'''
UnCheck: [[ ] "Automatically start Firefox in a private browsing session"
Another possibility is that there is a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak and any existing files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js .
See http://kb.mozillazine.org/Session_Restore

Accounting tab isn't there

Hi Gurus,
I created a material code, but when I tried to include the stock the system tells me that accounting hasnu2019t been maintenance, I checked the material master data and accounting tab is not there, my question is; how can I put the accounting tab in this material, let me know if more info is needed.
Thanks

Dear Antonio Rodriguez
Inorder to include certain or exclude certain fields in material masters ..................
You go to OMS2 select the respective material type (FERT) ,double click on that.Then a screen will be appeared here you can see the tab called "User departments" in that select the accounting (if you want to see this tab in respective material master).If you don't want respective tab in material master don't select the tab in OMS2.
Please let me know if you have any further clarifications
Thanks&Regards
Raghu.k

Can anyone tell me why the install app facility is not there in apple iPad mini IOS7.1 and then how to download free apps

Please help me I bought ipad miniIOS7.1 but in the App Store the install tab is not there then how to download the apps ? I would be grateful if someone helps me in this

Do you mean an app's price button, or 'free' if it's free to download, isn't showing against the apps in the store ? If you do then do you have an app age rating set in Settings > General > Restrictions that is stopping you downloading them ?

HT4623 The software update tab is not in my settings but I can't download certain apps as I need to update ???????

I have been trying to download some apps and it tells me I need to update my iPad. The software update tab is not there in my settings, Why?????

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

Related tabs are not opening together

I recently got a new Windows 7 laptop, and decided to use Firefox Sync to move everything related to Firefox over. I think it got everything, and I'll be going through later to be sure and add my Stylish and Greasemonkey scripts. Everything looked fine...'till I started opening new tabs. Every tab opened in a new tab at the far end. Related tabs weren't sticking together. I've checked my settings, and everything looks in order; I can't figure out what's wrong.

You can change a preference to make tabs open
# at the end of all open tabs
# immediately after the current tab.
NOTE: There is also an option in Tab Mix Plus (which is listed in your Extensions) in TabMixPlus Options ''Events > New Tabs''. See TabMixPlus Settings --> http://tmp.garyr.net/help/ (''scroll down to the settings section'')
See: http://kb.mozillazine.org/About:config
*Type '''about:config''' in the URL bar and press the Enter key.
*If you see the warning, accept it (promise to be careful).
*Filter = browser.tabs.insertRelatedAfterCurrent
*Look at the "Value" column ('false'''=open at end, ''true'''=open after current tab); Value = true is the default.
*Double-click that preference to toggle the value from true to false, or false to true
*Restart Firefox (File > Restart Firefox)
See: http://www.mydigitallife.info/2010/02/01/change-firefox-to-open-new-tab-at-far-right-end-of-tabbar-disable-insert-next-to-current-active-tab/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

It's also under the File menu.

Safety Plan Tab Not visible in PM Order

Hello Experts,
I am implementing SAP Worker Safety Management and have configuration at "Specify Safety-Relv. Plnts and Plnt-Specific Safety Settings". Still at my PM order i can not see "Safety Plan" tab.
Pl guide me about other configuration I need to do in system to get this tab.

Useful Info

Why is my App Tabs not there?

Usually, whenever I pin an App Tabs it's there. But not today.

App tabs and Tab Groups (Panorama) are stored as part of the session data in the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore
Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed.
*App Tab Initializer: https://addons.mozilla.org/firefox/addon/app-tab-initializer/

I tried to use the app tabs but when I reopen my browser they are not there anymore

I added my favorite tabs as app tabs but when I restart my browser they are not there anymore, is that normal?

App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore
Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed.

I do not appear to have the "main" Firefox tab in the top left corner to enable me to clear history. I have reinstalled FF but it is still not there.

In the Firefox help video they show a Firefox icon in the very top left of the window. This is a drop down tab where one of the items is the clear history option. I do not have this tab and have tried reinstalling Firefox but it is still not there. On the video it is shown above the File / Edit / View etc options.

If you don't have the Firefox button, you're using the classic view. To restore the new view of Firefox (Changed in Version 4):
* View > Toolbars > Menubar [Uncheck]
In Firefox 6 you can use this to clear your history/other offline content:
Click on the Firefox button on top left part of your browser:
* History > Clear Recent History
There you can select what you want to clear.
If you want to see the menu bar you can press alt on your keyboard so you can see file/view/...
Also for activating it to always be there follow this (Classic view of Firefox):
* Firefox > Options > Menu Bar
Don't forget to hit the 'Solved it' button if this solved your problem so the topic will be closed.

Metadata under the Page Properties is not there - even though I have the latest March 15 Update

Anyone,
Metadata under the Page Properties is not there - even though I have the latest March 15 Update. ?? Help. Why is this?

It's only there for "normal" pages, not master pages.

Planning tab is not there in KF properties

Similar Messages

Maybe you are looking for