Planning using the Non-Cumulative Key figures

HI,
In my reporting requirement for IP, I need to get some actual values from the cube 0IC_C03. The key figues which I required are 0VALSTCKVAL and 0TOTALSTCK, but these 2 are non-culative key figures. When I selected these 2 key figures in my aggregation level, it is throwing an error message as "InfoObject 0VALSTCKVAL(Version A) is not compounded and Aggregation level is inconsitent".
I read in some document that, it is not possible to use non-cumulative keyfigures in ALVL.
I searched in SDN and SERVICE also, but some documents are saying that, in new path level (19) it is possible. Now I using the path level 18 only. In this case how we have to use these non-cumulative keyfigues,, please sugguest me...
Thanks in advance...
Regards
Rajesh

Hi
Non-cummulative keyfigures are not supported fro planning and teh error thrown is correct.Please find the help link which gives what are supported and not supported as part of aggregation levels.
http://help.sap.com/saphelp_nw70/helpdata/EN/43/1c3c7031b70701e10000000a422035/content.htm
Regards, Hyma

Similar Messages

Intregarted Planning Design for Non-Cumulative Key Figures

Hi,
I have a requirement where i have to design a planning layout for a Invenotry Scenario (Using Non cumulative Key Figures).
What should be the factors i should consider in my design specifically for non cumulative ke figures and how it is different from design for a regular (cumulative) key figure
Thanks
Rashmi.

Thanks for your response. My requirement is to design a retail inventory planning application in which one of the KPI's planned is stock price which is a non cumulative key figure and i am trying to figure out how than can be planned if non-cumulative key figures are not allowed in planning
Thanks
Rashmi.

How to use a non cumulative key figure in a multi planning area

Hi
I'm new to bps, my problem is
I need to read the last stock quantity and value at plant and material level to do further calculations in a fox formula, so i made a planning area for the cube 0rt_c36 and another for my tc cube where the results should go, then i combine these areas in a multiplanning area.
problems arise when selecting the key figure in the ratios tab of the multi area, the ratios 0CPTOTSTOBU (last stock) and 0CPTOTSTOPV (last stock purchase value) are not available, only the inflow and outflow ratios are 0CPTOTREBU and 0CPTOTREPV.
I know when reporting, the actual value for stock is calculated by bex, namely, there is no data store at database level, so the question is:
How to obtain last stock for using in bps??
thank you for any help
regards
A. Garduñ

Hi Azael,
In the How to Papers, you will find a Guide on how to take a Sanpshot view of the Stocks(How To Handle Inventory Management Scenarios in BW). Basically if you implement the Guide, you will have another cube called ICSNAP1, which will contain stock quantities /values at the end of each month. You will therefore have to take stock at the end of the last month from that cube and add up the relevant receipts and issues to arrive at the current Stock or Stock as on a particular date.
Hope this helps!
Regards
Sriram

Using Non cumulative key figure in Real time cube

Hi gurus,
I have used non cumulative key figure in a real time cube and when i tried to enter some data using RSINPUT ,it is giving an error and the data is not getting saved.
Can anyone please tell me how to use the Non cumulative key figure in the Real time cube .
Thanks in advance
Regards,
Ravikanth

Hi Ravi,
Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee.

Integrated Planning and Non-cumulative key figure

Hi
I´m creating an Integrated Planning application and a problem has occurred. The users want to plan on inflow and outflow and at the same time have a row with the total sum in the same layout (they are planning on 0CALMONTH and 0ORGUNIT) This can e.g. be solved through use Web Application Designer with one planning query and one traditional query.
Any way. I have created a non-cumulative key figure with an inflow- and an outflow key figure. The problem is that the non-cumulative key figure starts working first when I change the planning mode from plan status to load status. I could use function modules, to change the status, behind the save button but there are several users who are planning at the same cube at the same time and I don´t want to lock the others from planning.
How to solve this?
- Is it possible to restrict the switching, from plan to load, by setting some kind of filter at the users org.unit? (0ORGUNIT is an authorization object)
- Is it possible to create a process chain and then load the data to another cube for reporting at just this key figure? And also here have a filter at the org.unit
I will gladly get all kind of idea and input to solve this problem. Maybe there is some other way to go than using non-cumulative key figureu2026

Thanks for your answers
I have tried different scenarios and I will use a u201Dsave-buttonu201D. In the save-button I use the commands SAVE_DATA and EXECUTE_PROCESS_CHAIN. The command u201CEXECUTE_PROCESS_CHAIN starts a process chain that switches from plan mode to load mode and then back to plan mode again.
One new problem has arisen. The non-cumulative key figure is updating if an existing value (inflow- or outflow) is changed. But if an input is made to an empty cell, without value, nothing happen when I press on the start-button. BUT if I refresh the browser the non-cumulative value is updated!!!
Is there any command in WAD that refresh the whole page? If so I can include it in my start-button.
If not, any sugestion on how to solve the problem?
Best regards
Mikael

Problem with Non-cumulative key figure.

Hi all,
I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. <b>This cube is defined by me to test the non-cumulative key figure.</b>
<b>In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.</b>
I have done the following while defining the non-cumulative InfoCube:
1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
2. Loaded data to non-cumulative InfoCube from flat file.
3. Compressed data in non-cumulative InfoCube after the load.
Note:
1. Validity area is determined by the system based on the minimum and maximum date in data.
2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
Is there any other settings to be done?
Please help me in resolving this issue.
Thanks and regards
Pruthvi R

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

Non-Cumulative Key figure with inflow & outflow

I am using some non-cumulative key figure in our inventory cube, however, I could not find the non-cumulative field in E or F table of the cube?
Is there a separate table to hold the reference unit. If so, what is the table name.
Thanks.

Hi,
Go to t-code RSDV and enter the tech.name of your cube that has the non-***. key figure and you will see a validity table. This is only thing I know that will make you look at validity table.
The unit for the Non-*** KF will be the same unit as its inflow and outlow parameters' unit.
Thats my 2 cents on the matter.
Reddy

Non-cumulative key figure in Real Estate implementation

Hi all,
    I am implementing Real Estate Module in BW. We are doing analysis on Condition amount ( BKOND).
    The mapped Info Object on BW side is 0COND_AMT, according to standara info sources given by sap ( for e.g in 0RE_3) and it is defined as a Non-cumulative KF with Non cumulkative Change 0COND_CHG.
Can anybody plese explain me the logic behind this. and also source field and table for this 0COND_CHG in R/3 side.

Hi Ravi,
      Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee.

Difference between cumulative and non-cumulative key figures

Hi,
What is the difference between cumulative and non-cumulative key figures and under what conditions they are used. What is snapshort and where it is used.

Hi.............
Basically the key figures are of two types cumulative and non cumulative.
Cumulative are the normal one which you use always and they always bring the new values of the key figures in the delta that is if suppose A has value 10 and after change the new value is 20 then you will use cumulative key figures there, and your delta( new value) will bring 20.
but suppose your key figures field only the change in the prior value that is in this case the delta in the key figure value will bring 10 (20-10- change of 10 )as new value in the key figure A then you will have to model it through the non cumulaitve key figures.
Now
1) Cumulative is for the first case that is if the key figure alwyas brings the new values of the key figure and not the change sin the key fiures value.
2)NCum. value with NCUM value change:
In this case ther is only one field which brings the changes for a particualr key figure and you ahve to define that key figure as non cumulative.
Ex: In case of stock only one filed brings both ingoing value and outgoing value so 10 ,-4,100,-34.....
In this case you will this option and use the key figure here in the space provided.
3) In this case you haev two separate key figures one for the inflow of stocks and one for the outflow of the stocks.
you use one key figure for the inflow and one key figure for the outflow.
The main key figure autiomatically takes care of the logic and gives the correct output upon the summation
net value of stocks( inflow- outflow).
Also do remember in this case the key figure for inflow and out flow are the basic key figures that is cumulative key figures.
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory. here the aggregation of key figure is based on the another info object
There are two different ways to define non-cumulative key figures:
Non-cumulative key figure with non-cumulative changes:
Before you can define the non-cumulative key figure, an additional cumulative key figure containing the non-cumulative change must exist as an InfoObject.
Non-cumulative key figure with inflows and outflows
There has to be two additional cumulative key figures as InfoObjects for non-cumulative key figures - one for inflows and one for outflows. The cumulative key figures have to have the same technical properties as the non-cumulative key figure, and the aggregation and exception aggregation have to be SUM.
Features of non-cummulative key figures
A non-aggregating key Figure.
Records are not summarized for Reporting
Exception Aggregation is being applied on these key figures on the level of one or more info objects usually with time .
Examples: Head Count, Account balance, Material stock
consider simple senario
Date Net Stock Quantity Sales Revenue
01.02.2005 40 1000
02.02.2005 50 2000
03.02.2005 25 3000
this is the query output if stock quantity has treated as cummulative and non-cummulative key figures
if stock quantity taken as a cummulative key figure
Date NET STOCK QUANTITY SALES REVENUE
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 100 6000
in the above result the key figure has aggregated to the total value that wont give sense to the net stock quantity
if stock quantity taken as non-cummulative key figure
Date Net Stock Quantity (LAST) Sales Revenue
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 20 6000
Hope this helps you..............
Regards,
Debjani................
Edited by: Debjani Mukherjee on Sep 15, 2008 7:22 AM

Include non-cumulative key figure in InfoSpoke

Hi Experts,
I am trying to create InfoSpoke for AR Line Item Cube(0FIAR_C03) with all infoObjects.
This includes non-cumulative key figures such as
0DSCT_DAYS1 (Days for first cash discount)
0DSCT_PCT1 (Percentage for first cash discount)
However, InfoSpoke run failed and following messages is displayed.
Error in SQL Statement: SAPSQL_ILLEGAL_AGGREGATE NOP
Does the infoSpoke not support non-cumulative key figures?
It worked fine when I remove all the non-cumulative key figures from the InfoSpoke.
*I certainly set 1 for 0RECORDTP(Record Type) in the selection tab as SAP Help instructed
Thank you for your answers in advance.

Try OSS Note Number: 850428.

Planning on Non-Cumulative Key Figure

Hello,
is it possible to plan data on a non-cumulative Key Figure?
SAP_ABA     701     0005     SAPKA70105     Cross-Application Component
SAP_BASIS     701     0005     SAPKB70105     SAP Basis Component
PI_BASIS     701     0005     SAPK-70105INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0001     SAPKITLRD1     SAP Solution Tools Plug-In
SAP_BW     701     0005     SAPKW70105     SAP Business Warehouse
BI_CONT     704     0003     SAPK-70403INBICONT     Business Intelligence Content
ST-A/PI     01L_BCO700     0000          -     Servicetools for other App./Netweaver 04
We implemented also the How-to Paper Copy and Paste in the Web Template but it isn't working in a proper way. UnderPrerequistes in the How-to Paper I found IE 7.0 and Clipboard. But I was informed that we have an higher Level.
Thank you in advance for your help.
Kind Regards
Doris

Not possible.Please find the help link for more details.
http://help.sap.com/saphelp_nw70/helpdata/EN/43/1c3c7031b70701e10000000a422035/content.htm
Regards, Hyma

Count the number of business partners on a non-cumulative key figure

Dear experts,
I have a problem. We have an InfoCube in BW in which the Activity Journals are loaded every day. In this Activity Journals it is registered that a Material was listed (available) at a customer (value 0 or 1).
We have a non-cumulative key figure MXW_LISTN with inflow (MXW_LISTI) and outflow (MXW_LISTO). In time this key figure receives +1 or -1 for a customer, material combination.
I want to use MXW_LISTN in the query in a specific way. The key figure on itselve tells me how many listings there are. However, I want to know how many business partners there are with a listing.
I was thinking about an exception aggregation on MXW_LISTN with reference characteristic 0BPARTNER and "Count <> 0". BW however refuses to do so and only lets me do simple aggregations such as AVG, MIN, MAX etc.
Can you think with me and come with an proper solution to count the number of business partners with a listing?
Your help is very much appreciated and rewarded!
Best regards, Hans de Klein

Would anything with virtual key figures be a solution? Please help me out!
Best regards, Hans de Klein

How use non cumulative key figure and noncumulative key figure screenshot

how use non cumulative key figure and noncumulative key figure screenshot

Hello,
Please see this docs for Non-Cumulative and Snapshot scenario,
[How to Handle Inventory Management Scenarios in BW (NW2004)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
[Non-Cumulative Values / Stock Handling|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366]
Thanks
Chandran

Purpose of Non Cumulative key figures

Whatu2019s the purpose of Non Cumulative key figures?

Hi....
There is an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Also Check..........
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
Re: Non-Cumulative keyfigure example
Hope this helps.....
Regards,
Debjani........
Edited by: Debjani Mukherjee on Oct 27, 2008 3:46 AM

Snapshot scenario or non cumulative key figure in inventory management

Hi
We are currently using Inventory Management with non-cumulative key figures but we get very high performance problems due to so big number of lines in info cube.
We are analyzing the other scenario with snapshot and I am asking if it would be very realistic to use it to satisfy our requirement: to be able to get inventory management at day level for about 2 000 000 combinations article-site and about 100 000 stock movement lines per day (we are retailer!).
Is there somebody to give me advice about it?
Tanks a lot
Anne

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

Planning using the Non-Cumulative Key figures

Similar Messages

Maybe you are looking for