Planning version 3.3

Hello all-
In Hyperion Planning prior to version 9 (during the time of application manager) how did we add attributes to the application( was it through web client?) and how was refresh of application done via planning desktop?
Thanks!
Edited by: user4958421 on Dec 28, 2009 12:29 PM

Hi,
Prior to version 9.3 a planning refresh was done via the planning desktop.
As far as I know attributes were added through the web when supported, they were in version 4.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Tcode KEFC and message:"Plan version is not supported"

Hello all,
Please is someone aware of solution for this situation:
- I upload with tcode KEFC forecast datas from excel file in CO-PA
- receiver records are created with errors
- when I check for the errors system tells me that "Plan version is not supported, diagnosis : Plan version "0" has not been created in operating concern "1000", Procedure: Transfer version "0" to operating concern "1000" and maintain the attrributes for that version"
- my concern is that when I check in customizing Planning, Initial Step: display view settings in operating concern details the version "0" is existingin the operati,ng concern "1000"
So do you have a solution for this issue?
Thanks and best regards
JCO

Hi Sudhakar,
Thanks for answer but version "0" is tickled for Plan Actual, WIP and variance and I don't understand what to do about KEPM.
Best regards
JCO

Diff: Version on workflow builder and Maintain Active Plan version on SWU3

Group,
Can any one help me to understand the Version on workflow builder and Maintain Active Plan version on SWU3
Thanks in advance !
Richard A

Dear Richard Antony,
The Versioning in the Workflow is very important its some what simmilar to the version on any SAP Objets like Tables, Program etc.
Here Suppose any change comes in working workflow, then in stead of directly change them you can create a version of them and them modify it. So that you can reverst back to that version if required.
Like wise there is lots of importance of versioning Workflow.
The Active Plan version is also important to establish at SWU3. As all the Workflow is using Organization management which is very depended on the Active Plan version. so based on which Plan version you want to use you can Provide in SWU3 to tell Workflow system to use this.
Hope this will give you a clear picture.
Regards,
Chandrashekhar.

"Open in Smart View" option. Hyperion Planning version 11.1.1.3

Failure to download planning form to Smart View using the "Open in Smart View" option. Hyperion Planning version 11.1.1.3. Error message "Web launch operation has been cancelled.
Your feedback is appreciated.

I understand you are on 11.1.1.3.
However, this is documented in the Known Issues section of the Smart View 11.1.2.1 readme and could be worth a try:
When you try to open a Planning web form in Smart View through Workspace, you may get this error: “Web launch operation has been cancelled.” This happens if Essbase has not been added as a server in Shared Connections. Workaround: Open the Smart View Panel in Smart View and add an Essbase server as described in the online help or "Adding Essbase Servers" in chapter 2 of the Smart View User's Guide.
HTH-
Jasmine.

Actual and Plan Versions annual view - Multiple versions per company code

Good Day,
Iu2019m creating an FI-CO query with an annual view of both Actuals and Plan Values, which uses period and version as input values. The dilemma is around the plan versions which are hardcoded per company codes (eg. 1 Company Code = versions 501 u2013 512)
Can anyone suggest a possible solutions as normally there is only one version used for planning but in this instance there are multiple versions per Company Code.
Currently the report is hardcoded for one Company Code and going forward it should cater for more than one(Company Company* 12 Version)
Kind Regards

Remove restriction on comp code. There could be 2 models.
1. Include comp code, value type and version in the rows. This way you get multiple records for a comp code. One record for actual data and one record each for plan versions. To have this model at the query, the data model in the cube also should be in this way (what we call as the account model), multiple records differentiated into actual/plan by valuetype and different versions by version.
2. Include comp code in rows. Create selections, one for actuals (restrict with key fig and value type 10, actuals), one for each plan versions (restrict key fig with value type 20, version 501. Create one selection for each version this way). This way we have one record per comp code with diff key fig for actual and plan versions. We call this as key fig model. To have this model at the query, the data model in the cube could be account model or key fig model. If it is key fig model then no need of selections. The key fig could be taken directly from the cube.

Error While Deleting Planning Version

Hello to all!
We have problem with deleting planning versions:
1. When i try to delete planning version, i recieve ABAP Dump with CONNE_IMPORT_WRONG_OBJECT_TYPE so i can't delete any planning versions in my system
2.Then when i try to access properties of plannining version appers the message that liveCache is not avaliable
3. In addition when i try to delete whole model it deletes it but when i refresh the screen i see model which i have already deleted
Please help me to solve this problems.
Thanks in advance!!

Hello Brian!
Look through this note https://service.sap.com/sap/support/notes/781817
You should delete variant in transaction SE38 (but i dont remember what variant (but this is one of the variant in this note) exactly you should delete so try it yourself.)
Also it maybe useful to look through this note https://service.sap.com/sap/support/notes/752838

Inspection lot creation based on "right" inspection plan version

I manage inspection plan ( inspection lot origin 01 ) with Change number; in this way I have differents inspection plan version based on date.
When I do a Good Entry based on purchase order , I need that system creates inspection lot version based on the purchase order creation date and not , as now, based on good entry date
Is it possible ?
When I create the purchase order I send to vendor also the inspection plan characteristich that have to be maintened ; for this reason I need to find same characterist during good entry inspection
Regards
Silly

You need to use one of the enhancements that Do-Wook has suggested. There is no standard SAP way to suppress the inspection based on the vendor batch number.
With the first enhancement you use the system to check for a previously received vendor batch and if one is found, then that batch number is proposed and not the next one from the numbering series. In this case, the lot isn't created than due to the inspection lot control of the inspection type.
With the second enhancement you check the vendor batch number and if it's been received you suppress the inspection lot creation and the stock goes right to unrestricted.
You'll probably need to do one or the other. Myself, I prefer the first enhancement.
Craig

Error during creation of Planning Version in SAP - ICH

Hi All,
I'm working on SAP-ICH, in that i tried to create planning version after creating the planning model but the system is giving information " General error in model/planning version management " . Could you please tell me the reason why this is happening and how to rectify the problem.
Thanking U all in advance.
Yashu Vyas.

Hi Vashu
My name is Vinod Tiwari.I am a SAP Technical Consultant with 4 years of exp in ABAP.Now i have a interest in SCM ICH 5.0.Could you pls guide me whats the way to start learning this.
Mo mobile no is +919899119182.
u can mail me ur valuable suggestion on my mailid [email protected]
Waiting for your reply.
Thanks and Regards
Vinod Tiwari

Want to copy actual data to plan version for profit & cost center

Hi,
I want to copy data from actual to plan data for first half of the financial year.
I was trying with T-Code CP98 . Are any Configration settings required to be done?
But facing error "you have not selected a traget project"
Is there any other way out for doing these activity?
Thanks & Regards,
Mayur
Edited by: Mayur on Feb 23, 2010 11:56 AM

Hello Mayur,
Please try with KP97/KP98 transactions.
I suspect, that you are giving wrong target plan version.
Please check your entries once again.
Regards,
Praisty
Edited by: Praisty on Feb 23, 2010 12:04 PM

"no active plan version exists" while adding system in partner profile

Hi,
i am getting "no active plan version exists" while adding logical system in partner profile. while duble click on this it showing "set active plan version".
Can anyone answer me how to do the set active plan version. I asked my functional team and they didnt know how to set it.
Thanks,
Gowthaman.

Thanks Sonia,
in OOAP i could not able to edit so i maintained plan version in OOPV and in sm30 in table T77S0 maintained PLOGI group.
Now i am getting different error while creating partner profile in we20..
*Object type US, ID CENTRALADMIN unknown (please observe upper/lower case)*
    *Message no. E0624*
*Diagnosis*
    *Object CENTRALADMIN of type US is not known in the system.*
*Procedure*
    *Enter a valid object and check the type.*
    *Make sure upper case and lower case are used correctly.*

What is the significance of plan version?

Hi all,
Pls tell what is the significance of plan version? What will happen if I create some orgunit oin current plan and some org unit in another plan?

Hi..,
Plan versions are scenarios in which you can create organizational plans.
==>In the plan version which you have flagged as the active plan version, you create your current valid organizational plan. This is also the integration plan version which will be used if integration with Personnel Administration is active.
==>You use additional plan versions to create additional organizational plans as planning scenarios.
But Only one plan version will be active at any time !!!
As a rule, a plan version contains one organizational structure, that is, one root organizational unit. It is, however, possible to create more than one root organizational unit, that is more than one organizational structure in a plan version.
For more information on creating plan versions, see the Implementation Guide (IMG), under Personnel Management ® Global Settings in Personnel Management ® Plan Version Maintenance.
regards,
sai ramesh

How to add "Cost Plan Version" and "Planned Cost" into CNE5 report?

Hi,
I would like to display Cost Plan Version(VERSN) and Planned Cost in the CNE5 report.
How to retrieve Planned Cost that based on the Cost Plan Version ?
Appreciate helps. Thanks.
Regards,
See Mun

Plan versions: A plan version is created in accounting and stores different cost plans for a project, such as an "optimistic" and a "pessimistic" plan.
Now coming to plan version 0 is verson where actaul cost is updated in your organisation.
Plan version 1 is used for the planning...
How to see the same in CJE5 is suggested by Virendra..
However there is no filed name planned cost in report but the name of the filed is Proj.cost sched.000
with which you can achieve your result.
path is run txn CJE5>give your Project no.> F8> in new screen> F5-->in new Window scroll down in the right side for the Proj.cost sched.000 filed > with select take the same to left side>Enter--> values will displyed for this field in your report.
similarly you can use the other fields as well... take help of F4, to know the meaning of fileds.
Regards
Nitin
Edited by: Nitin Patoliya on Jan 17, 2009 11:18 AM

Stock on hand in SIM planning version

Hi All,
Is there a way the stock copied from the active version 000 to the SIM planning versnon to be updated without running report /SAPAPO/VERSION_COPY_TRANS, but manually? The problem is that if I update the stock with the report the planning version is de-initialized.
Regards
Alper

I am afraid there is no easy way to do mass creation of stock. We have a similar situation where we need to create stock en masse for location products not defined in R3. The way we do it is using an excel file as input load that we make it read through standard function modules and create stock in Live Cache using /SAPAPO/OM_STOCK_CHANGE.
Some other function modules that we use
FILE_GET_NAME
/SAPAPO/DM_VRSIOEX_GET_VRSIOID
/SAPAPO/DATE_CONVERT_TIMESTAMP
/SAPAPO/OM_STOCK_CHANGE
/SAPAPO/DM_PEGID_GET_MATERIAL
Make sure that when you load, use appropriate UoM conversions.

Issues using the outline load command on Planning Version 11.1.2

Hi All
I am trying to add members into the Account dimension using the outline load utility within Planning version 11.1.2 and I am getting the following error message:
Unable to obtain dimension information and/or perform a data load: Unable to create print writer for log file. “D:Oracle\Middleware\user_projects\epmsystem1\Planning\planning1\Data\Log” is a directory. Exception in thread “main” java.lang.NullPointerException at com.hyperion.planning.utils.HspOutlineload.loadAndPrintStatus<Unknown Source> at com.hyperion.planning.utils.HSPOutlineLoad.main<Unknown Source>
The command synatx I am using is:
Outlineload /A:Plan01 /u:admin /I:D:\Oracle\Middleware\user_projects\epmsystem1\Planning\Planning1\Data\account.csv /D:Account /T
Where the headers of the csv import file I have used are:
Parent,Account
and
Account,Parent
I am e studio enviroment so not sure if this will cause issues.
Any help would be greatly appreciated
Regards

Hi All
I am trying to add members into the Account dimension using the outline load utility within Planning version 11.1.2 and I am getting the following error message:
Unable to obtain dimension information and/or perform a data load: Unable to create print writer for log file. “D:Oracle\Middleware\user_projects\epmsystem1\Planning\planning1\Data\Log” is a directory. Exception in thread “main” java.lang.NullPointerException at com.hyperion.planning.utils.HspOutlineload.loadAndPrintStatus<Unknown Source> at com.hyperion.planning.utils.HSPOutlineLoad.main<Unknown Source>
The command synatx I am using is:
Outlineload /A:Plan01 /u:admin /I:D:\Oracle\Middleware\user_projects\epmsystem1\Planning\Planning1\Data\account.csv /D:Account /T
Where the headers of the csv import file I have used are:
Parent,Account
and
Account,Parent
I am e studio enviroment so not sure if this will cause issues.
Any help would be greatly appreciated
Regards

INVALID PLANNING VERSION error

Dear All,
When i try to log into planning book ,i am getting an error INVALID PLANNING VERSION(Time series still existing). What could be the problem ,can any one help me out.
Regards,
Chetan.

Hi Chetan,
Have you tried to reinitialize the Planning Area?
Data will not be lost if you reinitialize. Try doing that.
Regards,
Raghu Kishore

How to get active plan version dynamically

Hi all,
I am making some HR reports in which I am pulling up position long text from hrp1001 by giving condition - where plavr = '01' . Now if the active plan version is not 01, my condition becomes vague.
Please let me know how to determine the active plan version dynamically in my sample code below
SELECT APERNR AOTYPE B~STEXT INTO CORRESPONDING FIELDS OF TABLE ITAB_EMP_DEATILS3 FROM PA0001 AS A
INNER JOIN HRP1000 AS B ON BOTYPE = AOTYPE AND BOBJID = APLANS WHERE ( BOTYPE = 'S' AND BPLVAR = '01' AND AENDDA = '99991231' AND BENDDA = '99991231') AND A~PERNR IN PNPPERNR.
SORT ITAB_EMP_DEATILS3 BY PERNR.
DELETE ADJACENT DUPLICATES FROM ITAB_EMP_DEATILS3.

Simply call FM RH_GET_PLVAR

Planning version 3.3

Similar Messages

Maybe you are looking for