Planning will not render post-installation

Installed Planning 11.1.2.3 in a distributed environment following the EPM_Standard_Deployment docs.
Post-installation, system diagnostics show everything working fine and all other products work correctly.
Assume Server A and B
Server A - Foundation, Planning installed but not config'd (per documentation)
Server B - Planning installed and config'd
When attempting to access Planning Administration via Workspace on Server A, I get a "website not found error".
When attempting to access Planning directly on Server B, I get re-routed to the following URL and nothing renders (servername redacted):
http://servername:8300/HyperionPlanning/faces/LogOn?_afrLoop=786018129329&_afrWindowMode=0&_adf.ctrl-state=oo6v2vjl8_4
In the HyS9Planning_epmsystem4-syserr.log, I get the following error:
HspRuntimeException: Registry: Error while retrieving System DB connection info from Registry
I can confirm that the config utility created the HSP tables in the Shared Services schema.
I have also dropped/recreated the HSP tables using the config utility to no avail.
I checked the JDBC connection info for Planning in the weblog admin console, and all looks well.
I've also tried to redeploy the Foundation web server, also to no avail.
Any ideas on where I might have gone wrong? Seems like a pretty obvious error message, but I would have thought that re-configuring Planning would resolve the issue?
Thank you in advance

Pablo,
Originally, I noticed the issue on the workspace server (during my post-installation testing) using the default URL for workspace:
http://server:19000/workspace/index.jsp
This results in a "website cannot be found error" in body of the page.
When that did not work, I decided to try and access Planning directly via the default Planning URL on the Planning server:
http://server:8300/HyperionPlanning/
Immediately once the browser receives a response from http://serverB:8300/HyperionPlanning, the URL changes to:
http://servername:8300/HyperionPlanning/faces/LogOn?_afrLoop=786018129329&_afrWindowMode=0&_adf.ctrl-state=oo6v2vjl8_4
This, along with the HSP error message about repository credentials leads me to believe that it is unrelated to OHS. Also, I can confirm entries for Planning the OHS file you provided above.

Similar Messages

  • HT3258 iBank 4 will not open post installation of Mountain OS   Any solutions?  Thank you

    Hello,
      I am an iBank 4 user.  i recently installed Mountain OS.  Thereafter, I could not open iBank.  Apparently, Mountain OS is restricting the 'launch". What can I do to rememdy this situation and get back to using iBank 4. 
    Any solutions?
    Thank you.

    Anyone? I'm going crazy here...

  • AIR application with Flex 4.5 will not render content. What gives?

    OK,
    So I've upgraded to Flash Builder 4.5 Premium and I am unable to develop desktop AIR applications with the 4.5 Flex SDK. I start by simply creating a brand new AIR application using the default SDK (Flex 4.5). I set the title property on WindowedApplication and include a simple Label component. The project compiles fine but when I run the application all I see is the adl window in the dock but that's it. If I modify the Main-app.xml file to set the visible attribute to true, I will get a small window but there is no content although the output window shows the application swf being loaded. Checking the release version of the Main-app.xml file shows the correct path location to the swf.
    Here is what I've tried so far:
    Install/reinstall Flash Builder, 4+ times
    Downloaded the trial installation twice
    Downloaded the SDK's for 3.6, 4.1 and 4.5.0. I then copied each SDK folder and merged the AIR 2.6 SDK with each copy. So now I have 6 SDK versions; one pristine and the other with the AIR 2.6 SDK merged. I then added each SDK individually and created an AIR desktop application for each. Each and every one works fine with the exception of the two 4.5 SDK's. They will not render content.
    I created a simple creation complete handler for the application that declares a simple variable and assigns a value to it. I then put a break point on the assignment and it never gets caught. More evidence that the swf isn't getting loaded.
    The computer I'm running on is a Mac Book Pro with Snow Leopard 10.6.7. If I create a web project in each of the 6 SDK's, those will work just fine. What the heck is it with Flex 4.5 and the AIR 2.6 SDK on this machine? I have the AIR 2.6 runtime installed as well as a number of AIR applications that work just fine. I also tried my 4.5 test on my windows machine and that worked like a champ.
    I am completely out of ideas. Finding information has been difficult because everyone is all about mobile so searching for desktop issues is a losing battle. I realize this is a long email but I'm desperate for help. There must be someone out there that knows more about the low level interaction between Flex 4.5/AIR 2.6 and the OS.

    Well, I finally found the issue, a corrupted mm.cfg file in /Library/Application Support/Macromedia. I deleted the file and then adl ran just fine.

  • Rendering - Final Cut will not render clips under any of the 3 choices?

    Final Cut will not render clips mov, or dv under any of the 3 choices, including stuff I have done before.

    I realize your problem is solved, but I thought I would post this is case it might helps others in the future.
    Under Sequence-->Render--> OR Sequence-->Render All--> OR Sequence-->Render Only--> make sure you have check marks next to all the different video types ("Needs Render", "Proxy", etc).
    If there is no check mark, then the video won't render - and this can sometimes seem random, like what happened in your case.

  • Windows 7 internet security will not allow the installation of Flash Player 17 Update

    Windows 7 internet security will not allow the installation of the Flash Player 17 update.  I have tried the direct install using the IE_AX update without success.

    Hi,
    Thanks for the screenshot.  It's very helpful. Essentially, this is an issue with the internet security settings on your machine (Internet Explorer > Internet Options > Security), and not a Flash Player issue.  I Googled "internet security settings prevented one or more files from opening' and it returned numerous hits.  I'm posting a few for you, however, I'm not endorsing any of them.  I recommend you search your self and select one you feel comfortable with.
    https://support.microsoft.com/en-us/kb/2588679
    https://social.technet.microsoft.com/Forums/windows/en-US/6bd973a1-38b5-4ad2-bcf5-e90be18c c64b/your-internet-security-settings-prevented-one-or-more-files-from-being-opened?forum=w 7itproinstall
    How to fix: These files can’t be opened. Your Internet security settings prevented one or more files from being opened. …
    and there are many more.
    Maria

  • Browser labs will not render any of the websites I have hosted on my server but has no issues render

    I just decided to test out browser labs to see if it's something I want to use when developing websites.
    Obviously the first sites I would run as a test are my sites that I already know how they render across multiple machines. What is odd is that they will not render at all! I get an error and am told to retry after over 5 minutes of attempting to process.
    I then went on to try other websites that I have built and the same thing. Then I decided to go with the tried and true google.com and it rendered just fine!! Then I went back and tried my domains and again, nothing! So i tried facebook.com and it worked!!
    I tested all of the domains i could think of that exist on my specific server account and none of them will work! It's very odd.
    Any thoughts?     

    There are a couple things I can think of that might be going wrong...
    1. When you give the URL to BrowserLab, it will make multiple simultaneous requests for the page from the web server. We've seen at least one situation in the past where those multiple requests would overwhelm the server and would not or could not respond. Try doing a test where you have only a single browser in your browser set.
    2. When some web servers get multiple simultaneous requests coming from a single address, they will interpret it as an attack and refuse to respond. And may log that address and permanently refuse to respond to it. Some additional details are here: http://blogs.adobe.com/browserlab/2011/04/14/browserlabs-egress-ip-addresses/
    Are the URLs you tried public and can you post them so we can try them out ourselves?

  • Firefox will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

    will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

    Can you attach a screenshot or link to the instructions you are following?
    You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can.

  • Imovie will not render photos with ken burns effect

    I have started to produce a video and have tried to import photos from both iphotos and straight from desktop however when i do this the red bar showing the state of rendering does not move. The photo will not render and therfor i am unable to use the ken burns effect. Could anyone please give me any idea of what i am doing wrong.
    Thanks.

    Hi
    What file type is Your photos eg .tiff, .pict or .jpg ?
    What size are they eg 1Mb, 10Mb or 100Mb ?
    How much free space is there on Your internal (start-up) hard disc ?
    Ps When ready - Don't use Share/Export to iDVD from within iMovie. Just drop Your movie icon
    (with a Star on it) into iDVD theme window.
    OR - Your movie project in iMovie will be harmed and You'll have to re-do it ! ! AND
    the DVD disc will be severely pixelated - extreme low quality Ds
    Yours Bengt W

  • Ultra 24 that will not perform POST

    I have an Ultra 24 that will not perform POST. I think the BIOS is corrupted or the motherboard went bad. All I get is the white Sun logo splash screen at poweron. The fan is running full speed too.
    Any ideas?

    So I took the iMac to the Apple store for service.  They confirmed my greatest fear...  Bad logic board.  The cost to replace this component was in the ball park of $700.  The techs at the Apple store provided daily communication as to the progress of their diagnosis.  In the end, I asked them to not do the repair and just button up the machine.  To my amazement, when I went to pick up the iMac they did not charge me a dime.  I then went and ordered a new 27" iMac online.

  • Missing render file/project will not render

    I'm new to using FCE - just got my iMac with FCE pre-installed a few weeks ago - and have run into a big problem with current project. When I open the program, it tells me one render file is offline and I can reconnect or continue. I have no idea where the file could possibly have gone, so I select 'continue'. But now the project will not render. I have four sequences open in the project file, and have tried everything - locking and unlocking tracks, selecting various combinations of render both, render all, render selection, rendering only audio or video, etc. All the appropriate render selections are checked in every option. But still, the project won't render any of the sequences; the render box comes up for a split second and goes away faster than the eye can follow. I've tried setting the scratch disk; that didn't help. I tried saving the project, closing and opening the project, etc. Nothing helps. It just won't render. Does anyone have any idea how I can fix this problem?

    When I say it won't render, I literally mean nothing happens when I hit the render command. I see the red timeline render bars. However, I see them only when I go to export the video as something else - a mov, dv stream, etc. In the project while working, there's nothing indicating render is required.
    To try and solve this problem of the missing audio clip, I opened a new project and imported the .mov file I was working with initially, which theoretically should have all its parts intact. I made the necessary modifications to the file (essentially starting all over) and then attempted to render. It still won't render. Nothing happens at all when I click any of the render options, even after I've made modifications to the video that would clearly require render - changing the aspect ratio and applying a widescreen video filter. So the program should recognize the changes and render, but nothing happens, whether I choose render from the menu or hit the keyboard shortcut.
    I'm a little hesitant to try scrapping the preferences as suggested above, but I am totally perplexed.

  • Digital Editions 4.0 will not open after installation on Windows  XP laptop.

    Digital Editions  4.0 will not open after installation on Windows XP laptop.  DigitalEditions 3.0 installs and opens fine.  Have tried 4.0 several times.  Removed 3.0 and 4.0, reboot, reinstall 4.0 still will not open.  Error message says Windows has experienced and problem and requires that Digital Editions must be shut down.

    Solved my own problem. It was necessary to delete all instances of Adobe Digital Editions in programs and  the registry. After doing so and reinstalling 4.02...., it became available in the "open with" dialogue box and became the default epub reader.

  • Suddenly fla will not render to swf; freeze; CS3

    I have been making swf's for a long time, but suddenly today, my last one for a project,
    it will not render, and program freezes solid.  What should I do?  The fla seems ok.
    preview in html will not work.  Restarts and permissions did not work.
    AS 2.0 Flash CS3

    In case anyone else has this problem, I solved it myself before getting any response from Adobe. I am on a Mac and the problem was a corrupted FLEXnet Publisher (the licensing system) caused, I think, by making a bootable clone of my HD.  Adobe has the solutions here:
    http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html.
    In my case I just deleted the Flexnet Publisher folder from HD>Library>Preferences and replaced it with an older backed-up version and then CS3 worked again.
    If you are on a PC google Adobe Flexnet Publisher and there are solutions out there.

  • Mac Pro will not restart after installation of Lion.  Help!

    Mac Pro will not restart after installation of Lion.  Help

    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • Videos Will Not Render.

    I have been working on some videos recently and Adobe Premiere Elements 9 has been working great for me.... Until today.
    When I try to render the videos which had successfully rendered beforehand, they will not render! But it WILL render .05 of a second of a clip. This problem has just risen today and it is annoying the daylights outta me. A bit of backround, I use a portable hard drive to hold all the footage when I make a video because the computers I use do not have enough space to hold all my footage. But this is kinda second guessed because when I make a new file on the pc I am using at the time, make a title, and give it a rendered effect, it will  still do the same thing.
    I hope to hear from someone soon.

    Welcome to the forum.
    Just to make sure that I am on the same page, as you, when you say "render," you are speaking of hitting the Enter/Return key, to Render the Timeline, for the smoothest playback. Is that correct?
    Now, on your Timeline, when you make a changes, such as adding an Effect, or any sort of overlay, such as a Transition, PiP, or an overlay Title, you will get a red line above that Clip, or portion of a Clip. If one hits the Enter/Return key, ONLY that/those section(s) with the red lines, will Render. However, if I read correctly, you are getting the red lines, BUT not all of that/those Clip(s) will Render. Is that correct?
    When only part of a Timeline Renders, the first two things to check are the position/length of the WAB (Work Area Bar). That can become accidentally set to too small a portion of the Timeline. The easiest way to make sure that the WAB has been extended to the full Timeline is to hit the \ (Backslash key), to zoom out to see the full Timeline, and then find the little "box" in the middle of the WAB. Dbl-click on that, to make sure that it has expanded to cover 100% of the Timeline.
    The next thing to check, is has an In, or Out Point been set on the Timeline. This can happen accidentally, if the CTI (Current Time Indicator) has been set to some point other than 00;00;00;00, or the full Duration of the Timeline, and the I (eye key) for In Point, or the O (oh key) for Out Point has been hit. The way to look for an In Point, or Out Point on the Timeline, is to look at the Time Ruler, and see if it is a different shade of gray, over Clips, before the end of the Timeline.
    If neither the WAB, or a Timeline In/Out Point has gotten set, I have a question: where are the Scratch Disks for that Project set? Especially with external HDD's, I have that location set to "Same as Project," so that all Render files, and the Media Cache, etc., are set to that same HDD.
    How much defragmented free-space do you have on the HDD, where the Scratch Disks are set?
    If to the external HDD, what is its connection type, i.e. eSATA, FW-400/800, USB, etc.?
    For the OS, how much defragmented free-space exists on your C:\?
    Good luck,
    Hunt

  • AP pro 1.5 will not render

    Sorry to be repetetive but my project will not render for some reason. THis machine in its current configuration
    has worked well in the past and the only difference is that I increased the RAM from 1 gig to 4 gigs. It has been suggested
    that I deacivate the program and re-install AP Pro 1.5. Is this a good remedy? The machine is a single core P4 3.6ghz and
    has done the job just fine prior to this. The ironic thing is that the project will export to DVD withour being rendered and looks
    pretty OK with just a couple of minor hiccups in the picture.
    Thanks
    Mick

    Mick,
    If you have the red bar but can see the preview without stuttering or hiccups, there is no need to render. If you have used color correction, multiple layers, some other effects, it may be different. Then the preview may stutter and if you want to see it in all its glory, you need to render. Just the other day I had a very long timeline (5+ hours) that was all red. I had no need to render it at all.
    On encoding everything is rendered again, but only for the encoding (unless you tell AME to use Preview Files, which I advise against).

Maybe you are looking for