Plannning Material and Plant for MRP Run

Hi,
If I have a material (01) extended on 2 plants, on one plant (A) we have production and planning/MRP + stock and on the other one (B), just stocking and transfer. B's requirements are to be entered and planned at A. I also want stock at B to be considered with stock at A when MRP runs at A. In the material master, I have some settings. I want to know if these would be any good:
Material 01 on Plant A:
MRP PD
Strategy 40
Lot size EX
Coverage profile applied
Material 01 on Plant B:
MRP ND/PD tried both
Strategy 40
Lot size EX
Coverage profile applied (same)
Planning material: Material 01 itself
Planning plant: Plant A
I particularly want to know about points 5 and 6. Will they make any difference if I run MRP on scope of planning(all plants) or just plant A? Will stock at B be considered? What difference does that setting make in my case? Please help!
Thanks!

No sales on Plant A. Only transfers and STO's. Stock is STO'd to Plant B (and other Plants, as well)
Plant B sells the stock.
Yes, I want to load the forecast in Plant A (COPA to SOP to DM to MRP). What do I do in this case?
I tried another case, as well. In that I put a special procurement on the material in Plant B view and marked it as external procurement. (the planning material and plant were there, didn't remove)
Then I entered the forecast in both plants separately (PIRs for both Plants) The requirements from Plant B made STPO Planned orders in Plant B and STCK Planned orders in Plant A. I am using coverage profiles (period is month, standard length 25 days, target 10 days for 1st period for 2 months, target 10 days for 2nd period for 1 month, target 10 days for the rest of the horizon) Not using any consumption modes.
The results I am getting don't make sense to me. I have attached screen shots for both plants MD04 and the MRP + work scheduling views

Similar Messages

Exclude QM lot stock for a perticular material and location for PPDS run

Hi Experts,
I would like to exclude QM lot stock for a perticular material and location for PPDS run. I have unchecked stock in quality inspection under productmaster/ Demand / availability stock in APO, but still QM lot is appearing in RRP3 view and considering for PPDS heuristic run.
Can you plesae explain how to exclude QM lot for a PPDS run.
--Kishore

Hi Kishore,
Some companies do not activate the iModel for Inspection Lots and manage the Inspection Lots as Quality Inspection Stock. For example this how it looks an Inspection Lot in RRP3 if you manage the Inpsection Lots as Stock in Quality Inspection:
Because you are using the iModel transferring Inspection Lots as QM Lots, you can not use the Stock in Quality.
You can read about it in the help of the field Inspection Lots in CFM1. This is the help:
Inspection Lots in Integration Model
You use this indicator to activate the transfer to SAP APO of inspection lots
that are relevant to stock.
Dependencies
You can only activate an integration model for inspection lots if you have
set in CIF Customizing that inspection lots should be transferred for materials
relevant to inspection lots instead of qualitiy inspection stock.
If the inspection lots in SAP APO are to contain the characteristic value
assignements of the batches assigned to them, you have to transfer the
characteristic value assignments to SAP APO before activating the integration
model for inspection lots. You can do this by activating an integration model
for stock.
Hope this clairy your doubt.
Kind Regards,
Mariano

User Exit to check whether chapter id for Material and Plant combination is maintained while creating sales order

Hello all,
my requirement is, system should give error message while creating sales order, if chapter ID is not maintained for a material and plant combination.
please suggest the user exit.

Hi
CASE 1 : All Plants are excisable.
In Material master , Foreign Trade data tab- mentioned Control code field mandatory. ( i.e nothing but Chapter ID)
CASE 2 : Few Plants are excisable
In the Case 2 you need to go for Enhancement
Program Name : MV45AFZB
User Exit: USEREXIT_CHECK_VBAP ( Item Level Check )
By using above user exit you write a logic with the help of ABAPer
Plant and Chapter ID combination table : J_1IMTCHID

Characteristics values for material and plant

Hi Experts,
I need to fetch characterstic values from a class Y-xx . I belive badi BAPI_CLASS_GET_characteristics
will give the result but my problem is in selection screen I am passing material no and plant
for this material and plant i need to fetch the characteristics values from the Y_xx class
Could any one suggest the BADI or FM or tables to fetch the results
Thanks in advance

Hi,
Go to MEK2, here enter the freight condition type, go to the output screen as pr the access maintained and select the line item and click on "Scales" button to see the from and to value.
Also you can check the same in "Conditions" button in Purchase Info record.

Outbound delivery allows only the unrestricted stock for particular material and plant

Hi,
In STO I have an problem the outbound delivery creations allows all stocks under unrestricted, Quality inspection, Block stock.
I want the outbound delivery creation of a particular material and plant it allows only the stock under the unrestricted only. It doesn't allows the stocks under the Quality inspection and Block stocks.
I need to know how to configure this or how to solve my requirements.
Regards,
Ramesh N

Dear Mohammed ,
as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
follow the below logic to achieve your issue .
you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
wait for other experts solution , if any standard is possible or not .
Regards,
C.B Reddy.

Characteristic values for the material and plant combination...

Hi Friends,
I would like to know how can we maintain the characteristic values for the combination of Material and Plant though the material is not batch managed?
Thanks in advance,
Ram

Hi Rajendra,
Thanks for quick reply. I am maintaining under classification view but it does not ask plant any where. So the value will be same across all the plants but i want to maintain characteristic values separately under each plant for same material.
Regards,
Ram

Planning File Entry Not Created For MRP Run

We are running MRP in backgroung at MRP area level as per scheduled. One material is missing from MRP run. We are expecting that we should get the proposals because stock is zero ( below reorder level) on the date of sheduled MRP run. Earlier it is working.The material MRP relevant data is given below.
MRP Type - VB
Reorder Level - 6
Lot Size - Fx
Fixed Lot Size - 10
Minimun Safety Level - 10
Please help us to resolve this issue.
Thanks in advance. For any clarofiaction, pls revert back.
Regards,
Chetan K

Hi,
Please check whether you have maintained the Availability check group 01 or 02 in MRP-3 View.
Also check the Dependent requirement selection in MRP-4 view individual collective and Selection method in MRP-4 view for its assy material.
Check the Plant specific material status whether it is blocked for any procurement or usage in Basic Data and Purchasing,MRP views.
thanks and regards
muru

Open Purchase Orders not considered as requirement for MRP Run

Hi ,
We are facing a issue of Open Purchase orders not appeared in Stock requirements list and also it is not considered as requirement for MRP Run against reservation.
As aresult for a reservation demand of 10 units we are ending with Open POs 10 units and a additional planned order 10 units.
Material Type : ERSA
MRP Type : PD (or VB)
Lot size : EX ( HB if MRP Type is VB)
Could you please throw some light to correct our settings to MRP to consider Open POs?
Saravanan

Can you check to see if there is a re-order point set up for this materia? That could be causing the problem too.

Need clarification for MRP Run

Dear SAP Guru,
Need the clarification for MRP Run:
1.At the time of MRP Run what is the status function for - shipping notification?
2.First i have run the mrp planning mode is normal after that i have some changes in material master , so planning mode is - RE Explode planning & Bom ? AT THE TIME OF MRP RUN it is correct
3.In background MRP Run at MDBT - what is the PLANNING MODE ?
4. How will work on automatic PO Create through MRP Run PR\S.?
Kindly give me the feedback , i am waiting for your reply.
Thanks,
Uma

Hello Uma
1 - A shipping notification is a confirmation from the vendor that the material has been shipped.
2 - When you change your BOM or material master MRP settings, system automatically set a flag on the planning file to re-explode the BOM. Therefore, MRP automatically re-explode the BOM, even with planning mode 1. Planning mode 2 is only necessary when you need to force a new BOM explosion and I don't recommend you to use it frequently, as it may lead to performance issues. See my document MRP: Why shouldn’t I use planning mode 3 on a productive system? for more details.
3 - See notes 206666 MRP: Control parameters during planning and 135788 - Planning mode in material requirements planning.
4 - MRP does not create or change purchase orders or production orders. MRP can only create planned orders, purchase requisitions or schedule lines.
At last, I wrote the following document with links to the MRP FAQ notes, which may be helpful to you:
MRP: Frequently Asked Questions
BR
Caetano

Need help on enhancement of 0CO_OM_OPA_1 with Material and Plant

Hi,
I have a requirement that need to build a BW report which shows Actual costs and Planned Costs of Service Orders. We are getting Actual costs from 0CO_OM_OPA_6 and now i am getting planned costs from 0CO_OM_OPA_1. For actual costs we are getting Service Orders, Material and plant from Satandard DS 0CO_OM_OPA_6. Where as For Planned Costs standard data source 0CO_OM_OPA_1 is not having Material and Plant information. For this we decided to enhance 0CO_OM_OPA_1 with Material and Plant.
But we are not sure the source tables for material and plant and the logic to extract these data from the tables. Can anybody please help me out.
Thanks for your supprt in advance.

It's possible you may need to use a CO-PA (profitability analysis) datasource instead of 0CO_OM_OPA_6. 0CO_OM_OPA_6 extracts data from CO tables.
Based on the path you provided "...Profit. segment...", the requested data might exist with CO-PA.
If you determine the required data resides in CO-PA, you'll have to create a datasource based on the operating concern. You can perform a search within the online docs for steps to create this datasource.
Hope this helps.
Rod

Transaction code to display exception messages by material and plant

Hi,
Is there a transaction code or standard report in SAP to display exception messages by material and plant? I see the exception messages by individual material and plant in MD04 but I need to see a collective view. I tried Collective access in MD04 and MD46 but they are not giving me exception groups but I need exceptions listed out by material and plant.
Thanks.

Visu,
I have never seen such a report.
MD06 does support fine tuning the output display, once the list has been generated. If you use this feature, the resulting display is the entire list as created by selecting the initial parameters (such as exception group), but with the specific items that contain your selected message highlighted. If you are addressing the messages interactively, you can select the review (glasses) screens, and scroll through just the ones which contain your selected exception message(s).
To try this, execute MD06. Select the groups as necessary. Execute. Wait for the list. Now, immediately, select 'search' (binoculars). Experiment with the output.
As mentioned in the previous post, if MD06 does not meet your needs, you will need to have a custom report written.
Rgds,
DB49

Error while closing the open purchase order for MRP run

HI expets,
We are facing issue while closing the old purchase order(18.12.2007) for MRP run, if we are clicking delivery completed for the particular line item ,system is showing the error NET PRICE MUST BE GREATER THAN ZEROthough we have made GR and IR aganist the line item an value is also showing in the purchase order history tab, but in the condition tab there is no value showing for the particular line item .Kindly suggest the way forward.
regards
Karthick sundaram

one thing for sure, you cannot proceed without maintaining proper conditions in the PO.
Why they are not there or not anymore there is probably caused by customizing or vendor master data changes.

What are all the major SPRO parameters available for MRP run in SAP.

Dear Frndz,
What are all the major SPRO parameters available for MRP run in SAP.
Regards,
Srini

Hi,
For MRP, the main Customization settings involved are:
1. Activate MRP and Set Up Planning File - OMDU
2. Define Parallel Processing in MRP - OMIQ
3. Define Scope of Planning for Total Planning - OMIZ
If you want to use MRP Areas and include this in Scope of Planning then.
1. Activate MRP for MRP Areas
2. Define MRP Areas - OMIZ
With MDBT of Program : RMMRP000 you can schedule the Background MRP Run. (with a variant)
If you need any any specific information please inform..
Regards,
Siva

How to get material and plant by providing control key as input ?

How to get the material and plant info based on control key values using a function module?
kindly help..

Hi,
Check the FM
K_VALID_PLANTS_OF_MATERIAL.
Sandeep Kaushik

From which table can I display PGI (material and quantity)for a spesific cu

Dear gurus,
From which table can I display PGI (material and quantity)for a spesific customer order?
Thanks in advance

HI
PGI and material quantity can be available in MSEG table
for this enter the sales order number in KDAUF or* MAT_KDAUF* fields in MSEG table
Also try with LIPS delivery item table and LIKP table
regards
SAP SD
Edited by: sapkpit_sd on Jul 22, 2010 8:14 AM

Plannning Material and Plant for MRP Run

Similar Messages

Maybe you are looking for