Plans for migration from JDev 10 to JDev 11

Hi
I just review online demos for JDeveloper 11, and I have a question about future migration path. In our company we now create applcaions in 10.1.3 version - (jsp not jspx pages - maybe it is mistake ?). It will be possible in future to migrate our ADF Faces applicattons to 11 version. Graphs and tamplates in new version are very impressive :)
Kuba

Hi,
you can upgrade applications from 10.1.3 to JDeveloper 11. However, this will take your application and run it as it is just using the newer components. So upwards compatibility is a primary goal.
However, we don't think we can automate the upgrade of an ADF Faces application of today to e.g. an ADF Faces Rich Client Framework application because of the changed lifecycle.
Its too early yet to say what will be possible and what isn't.
Frank

Similar Messages

What is the best solution for migrating from Maverick to Yosemite?

What is the best solution for migrating from Maverick to Yosemite? Anyone have suggestions?

Back up all data. Update all third-party software to the latest version and remove any you don't need. Download the Yosemite installer from the App Store. Run it.

Steps for Migration from SharePoint 2007 to SharePoint 2010?

Hi All,
Can any one tell the steps for migration from SharePoint 2007 to SharePoint 2010.
Thanks in advance!

This is the official communication:
http://technet.microsoft.com/en-us/library/cc263212.aspx
and this is a step by step guide:
Step by Step inplace upgrade to SP2010
Hope it helps!
Thanks, Ransher Singh, MCP, MCTS | Click Vote As Helpful if you think that post is helpful in responding your question click Mark As Answer, if you think that this is your answer for your question.

Planning a migration from Exchange 2010 to Exchange 2013

Hello,
I am planning a migration from Exchange 2010 to Exchange 2013 and I was wondering if there was a good guide on the UM migration. I haven't found one that isn't confusing as heck.

Hello,
Is there any update?
If
you have any feedback on our support, please click here
Cara Chen
TechNet Community Support

Issue in Migration from JDev 10.1.2 to JDev 10.1.3

A web app developed under JDev 10.1.2. Now try to migrate it to JDev 10.1.3. During the migration process, encountered a message:
Migrating /D:/Oracle/App/webroot/WEB-INF/struts-config.xml from JDev 10.1.2 to JDev 10.1.3
Detected custom lifecycle in the ADF application - struts-config.xml is not migrated. Please refer to documentation section on migration.
Migration failed for /D:/Oracle/App/webroot/WEB-INF/struts-config.xml
What should I do?
Thanks

i got same problem too.
run project,display as follow:
java.lang.RuntimeException: Model binding context not initialized at oracle.adf.controller.lifecycle.LifecycleContext.initialize(LifecycleContext.java:113) at oracle.adf.controller.lifecycle.LifecycleContext.initialize(LifecycleContext.java:77) at oracle.adf.controller.struts.actions.DataActionContext.initialize(DataActionContext.java:51) at oracle.adf.controller.struts.actions.DataAction.execute(DataAction.java:150) at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482) at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507) at javax.servlet.http.HttpServlet.service(HttpServlet.java:743) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)

Error in deploy, after migration from jdev 11.1.1.3 to jdev 11.1.2.0

Hi,
I am using Jdev 11.1.2.0.
migration successfully at 11.1.1.3 to jdeveloper 11.1.2.0.
when I deploy the new version Viewcontroller project I got the error like "An unreported error occurred in Appc. No errors were reported, but the tool returned a failure result code: 1." .
Regards,
Ragu.

same discussed here as well.. have you tried the suggestions provided here
Re: Migrate from JDeveloper 11.1.1.3 to 11.1.2

Resources for migration from legacy Cisco VPN client to AnyConnect?

As the legacy client is now officially EOL'd, and it is having issues with Windows 7 - the need has presented itself to migrate to AnyConnect.
The complicating issue here is that many of the machines that need to be migrated connect remotely and never touch a corporate LAN - as such - I need to devise a means to remotely and seamlessly (as much as possible) migrate from old to new. Sounds a bit like changing the wings on a flying plane, but I'm guessing others have had to face the same issue. By procrastinating this migration - my hope is that your blood spilled will be mine saved? (Just kidding. Sorta).
Any tips, input, suggestion, procedures, FAQs, good luck wishes, etc. greatly appreciated.
Cheers,
JP

Hi Andy
Anyconnect licensing is a little complicated, but 99% of the time you only need the "Essentials" AnyConnect license for your ASAs. This gives you everything that you have using the old Cisco VPN Client.
Essentials is licensed per ASA, and not per user like the other ASA AnyConnect licenses.
AnyConnect Premium gives you all that Essentials give you plus "clientless" VPN (Web portal type stuff).
Configuration wize - it's pretty simple and similar to how you configure the old VPN support. There's a wizard to assist you in configuring it if you like that kind of thing.
HTH
Barry Hesk
Intrinsic Network Solutions

How do I know what are custome code deployed on my site for Migration from 2010 to 2013

We have around 500 sites and several Webapplication. Now we want to migrate site from SharePoint 2010 to 2013
We will use Metalogix tool for Migration. However we want to know which custom changes site Have , SO those WSP we can deployed on 2013, So that Site will work fine After Migration.
SO question is there is any way where I can find what customization site have ?
I want poweshell which will tell me these WSP have deployed on this Sitecollection , SO that only those I will deploy on 2013 ? ALso
Suppose I have created Workflows through designer , is there any powershell which will tell me these workflow have deployed on particular site, so that I can check is those Migrated successfully or not.
Please mark answer , if you think answer is helpful or correct.

Hi,
Please see the link below that will give you detailed steps to identify customizations
Checklist for upgrade
Cheers
FrenchSpeaker - MCTS

Advice for migrating from Exchange to OS X Server

I am in the process of migrating away from Microsoft products altogether. The biggest beast of all is going to be Exchange.
I am looking at imapsync as a possible method of migrating user mailboxes. Is there anyone here who has undergone this task? Are there any better solutions out there for migrating the mailboxes over?
Thanks in advance.

slopresto wrote:
Is it really that problematic?
I am supporting (begrudgingly) a number of OS X Mail servers. What Apple has up to now has not been very good. No vacation messaging without rolling your own add-in, weak web mail interface, poor integration with other Apple products (iPhone), randomly corrupted databases for no apparent reason, the inability to maintain read/not read status on reconstruct or migration, poor spam handling, no migration tools. I call it the problem of the week. I got a new one today. Unlike any other problem ever seen so far. And it effects one account only. I will admit that I am just tired of it. Does it work. Mostly. But there are better solutions on the platform than the built in solution. Now, this "may" change when Snow Leopard is released. http://www.appleinsider.com/articles/09/02/13/snowleopard_server_to_ramp_up_scalability_andperformance.html which I can not confirm nor deny.
I have used straight postfix on Linux before with only an occasional problem, but never in a corporate environment.
Sadly, this is postfix on OS X, not postfix on Linux. As sad as this is to say, there is a difference and the difference is not in favor of OS X.
My boss, on the other hand has been a Mac guy for 10+ years and assures me that I will be impressed by the performance gains and lack of issues we will have by switching over from Microsoft products.
You will have gains. You will not be tied to licensing fees. You will not be plagued by the intricacies of an Exchange server and its myriad of updates, patches, tweaks, and adjustments. Heck, you will not have to reboot the machine every week to keep it from crashing. OS X has a lot of advantages over Windows in a server environment. OS X has a lot of really good services that are rock solid (BIND, Apache, racoon, the dev tools, Apple File Services (yes, I said it, it is a really good filing protocol!), Podcast server, wikis, directory services, chat server...) that make the OS X a swiss army knife of sorts. But in my experience, mail has been an afterthought and generally more trouble than it is worth.
As a side note, I should mention that Apple did pull off some real magic with the one checkbox mail cluster. I you have an Xsan and are load balancing your mail servers, the setup is beyond easy. There, I said something nice.
Is there anyone out there who has done this successfully and may perhaps know of an easy method of migrating the mailboxes in. Right now, it is a toss up between imapsync and doing a straight import via Outlook using their pst files from the nightly exmerge.
There are methods of doing the migration. If you decide to import via Outlook, I suggest doing a rule based move. If you do a drag and drop, the IMAP connection will likely drop after a few hundred messages and then you have no idea where it stopped. Create a rule to do the move. It will take longer but the time lost to frustration and manually finding where the copy stopped equals out.
Good luck in your migration. I am sorry if I came down negative. OS X Server is a great product. I just have a lot of criticism about the mail implementation. I will say, I am looking forward to September a bit as my opinion may change.
Message was edited by: Strontium90

Project Plan for Migrating to 11g

Hi,
We are planning to Migrate to 11g from 10g.I need a project Plan template.
Regards
Narasimha

Pl post which version of 11g. I do not believe you will find such a template. However, you may be able to make your own by reading thru these MOS Docs -
601807.1 - Oracle 11gR1 Upgrade Companion
785351.1 - Oracle 11gR2 Upgrade Companion
HTH
Srini

Cant finish data plan for Ipad2 from singapore is 50GB ?

In singapore the Teleco operators is giving out 50 GB data plans as a package .
we will needs a application to use it as in data plan for sms to use up our plan .
any other application on Ipads that used data plan for communication .

Stacyanne, sorry to hear of that bad experience at the VZW store. I got my daughter an iPad2 for Christmas as well and she recently signed up for the $20 PRE-PAID (1GB) Data Plan. I just went on the VZW website and saw that Plan was still available - as follows (from website page http://www.verizonwireless.com/b2c/plans/?page=mobileBroadband):
Prepaid Mobile Broadband Plans
Pay as you go. That way you only pay for the data you really need.
Tablets
Monthly Access
1GB Monthly Data Allowance
$20
2GB Monthly Data Allowance
$30
5GB Monthly Data Allowance
$50
10GB Monthly Data Allowance
$80
No Reconnection fees, and no overage charges. Tablet plans not availabe on all tablet models.
This is the same Plan I have and I haven't seen anything that states this is no longer available. You can sign up for this right on your iPad2. You can also turn it on and off - in other words, if you don't see yourself needing it for a month or so you can cancel the Plan and then re-enroll when you see a time coming up when you will need it.
Hope this helps.

Support of OMWB 9.2.0 for Migration from Informix 9.2.1 to Oracle 8i

Hi,
I have a requirement for migration of Informix 9.2.1 DB to Oracle 8i. Does OMWB 9.2.0 support this?

Thanks for the Answer but;
I don't think there is not another place to download this file therefore, i need to know it if there is...
Kind Regards
Ömer KAYA
Survey Eng.

Steps for migrating from Oracle10g to Oracle 11g

Hi,
Please send me steps to migrate from Oracle10g to Oracle 11g on Redhat Linux x86_64 on RAC with ASM.
Regards,
Tushar

http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/toc.htm

Error while migrating from JDev 11.1.1.3 environment to 11.1.1.6

Hi,
I have developed a BPEL process including Human task and Business rules on JDeveloper 11.1.1.3. The human task worklist page and its project were autogenerated and then I was deploying both the projects from Jdeveloper to weblogic 10.3.3 server and it was working fine.
We needed to migrate the same project to JDev version 11.1.1.6 and for this I have imported the two projects into the new workspace and JDeveloper itself migrated the project to thie higher version.
However, while using the same deployment process and deploying on compatible weblogic server, I am facing issue while deploying worklist application and following appears on the domain log:-
There was a failure when processing annotations for application /u01/oracle/SOA/SOA_INST/user_projects/domains/base_domain/servers/AdminServer/upload/ApprovalPage/app/WorklistADFPage.war. Please make sure that the annotations are valid. The error is oracle.adf.library.webapp.ResourceServlet
Failure occurred in the execution of deployment request with ID '1352977219006' for task '29'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'WorklistADFPage.war'' weblogic.application.ModuleException: Failed to load webapp: 'WorklistADFPage.war' at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:395) at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:649) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191) at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:44) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:209) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:749) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:47) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221) Caused By: java.lang.ClassNotFoundException: oracle.adf.library.webapp.ResourceServlet at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297) at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270) at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64) at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:43) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processServlets(WebAnnotationProcessorImpl.java:225) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processJ2eeAnnotations(WebAnnotationProcessorImpl.java:209) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processAnnotations(WebAnnotationProcessorImpl.java:108) at weblogic.servlet.internal.WebAppServletContext.processAnnotations(WebAppServletContext.java:1370) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:452) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:497) at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:418) at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:976) at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:384) at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:649) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191) at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:44) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:209) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:749) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:47) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
In JDeveloper it says:-
Weblogic Server exception: weblogic.application.ModuleException: Failed to load webapp: "WorklistADFPage.war"
Caused by: java.lang.ClassNotFoundException: oracle.adf.library.webapp.ResourceServlet
Also when I see the libraries and classpath of my project I see ALE components jar marked in red.
My Composite gets deployed, and the issue comes only with worklist project.
Please suggest how to approach to resolve this issue.
Thanks in advance.

Hi,
actually there is no backward migration path if you used Facelets for building your pages. For page fragments you will need to manually change ui:composite to jsp:root tags. To ensure web.xml is setup correctly you should create a new project in 11.1.1.6 and copy the web.xml over (ensuring the web.xml is configured for ADF use). Probably copying the content of the JDeveloper 11g R2 project into the 11g R1 project and then fixing problems is the way to go. As said, there is no automated backward migration path
Frank

Most Difficult to Migrate from JDEV 10.1.2 to 10.1.3

Hi Oracle Team,
I have developed new application from scratch containing 700 pages from struts based to Jdeve 10.1.2 with UIX , Struts Controller , BC4J ( ViewController ,Model) based architecture of Jdeveloper 10.1.2.
Now oracle annouced that UIX will be no more part of 10.1.3 , I have to migrate once again to JSF based instead of UIX.
It's really annoying to see big companies coming with some framework and going back to make it absoulete.I have posted many threads regarding migration of my apps to JSF based ,but i could not see any proper reply or any straight path that do this migration stuff.
Here is my architecture
ViewController-Model (
1.Jdeveloper 10.1.2
1.UIX page with lot of javascript validation.
2.Struts Controller (how should i migrate this)
3.BC4J
4.Jheadstart plugin for generating pages in 10.1.2
I would appreciate , if you can show me any good way of doing migration with
less housekeeping.
Thanks a lot,
Hasam

Hasam,
We do have a uix to JSF migration utility that you can get through the check for update center. The missing part there right now is that it doesn't support uix template migration.
If you are using jheadstart you might want to post your question on the jheadstart forum as well they might be able to do the migration through their repository.
And remember that if your application is working now and your customers are happy then you don't have to migrate it.

Plans for migration from JDev 10 to JDev 11

Similar Messages

Maybe you are looking for